professor!shamsuddin!bin!sulaiman.phd!€¦ · page3/80% ks%353% material%engineering% upm% ks%373%...

/80

B. Educational and Academic Qualification

1989 – 1991 University of Wales, Swansea, United Kingdom PhD in Mechanical Engineering Thermal and Flow Analysis of Casting Process: Numerical Simulation and Experimental Works (Areas of interest: Casting Technology, Metal Forming, Composite Material and Automation)

1987 – 1988 Univeristy of Wales, Swansea, United Kingdom Master of Science (Mechanical Engineering) Design and Economic Manufacture

1982-‐1986 Universiti Pertanian Malaysia Bachelor of Engineering (Agricultural)

C. Appointments and Administration Duities

No Detail Designation Duration

1 Dept. of Mechanical and Manufacturing Engineering, Faculty of Engineering Universiti Putra Malaysia

Professor Sept 2007-‐to date

2 Universiti Putra Malaysia Senate Member 1July 2011-‐ Jun 2014

3 Program Master Kejuruteraan Sistem Pembuatan Coordinator 2013-‐2018

A. BIODATA

PROFESSOR SHAMSUDDIN BIN SULAIMAN. PhD BEM, MySET, MASME, MAFS, IAAM

Department of Mechanical and Manufacturing Engineering Faculty of Engineering Universiti Putra Malaysia (UPM) 43400 UPM Serdang, Selangor, MALAYSIA

Specialisation: Manufacturing Engineering, Metal Composite Materials and Casting Technology

Tel: 603-‐ 89466334 Fax: 603-‐ 86567122 Mob: 6016-‐2276215

email: [email protected] website:http://www.upm.edu.my Scopus: https://www.scopus.com/authid/detail.url?authorId=12647225400 H-‐Index: 17 ; Google scholar: 23

/80

4 School of Graduate Studies

Universiti Putra Malaysia

Deputy Dean

April 2008 – March 2011

5 Faculty of Engineering Universiti Putra Malaysia

Deputy Dean

Sept 2003-‐Aug 2006

6 University Research Park/Taman Penyelidikan Universiti (TPU) Universiti Putra Malaysia

Deputy Director

Feb. 2001-‐ Nov 2001

7 Dept. of Mechanical and Manufacturing Engineering Head Jan 1995-‐ Aug 1998

8 Kolej Tun Perak Universiti Putra Malaysia

College Master/Pengetua

April 1999-‐Oct 1999

9 Sport and Social Club, Faculty of Engineering Deputy President

1997-‐2000

10 Dept. of Mechanical and Manufacturing Engineering Research Coordinator

2014-‐2016

11 Foundry Lab, Dept. of Mechanical and Manufacturing Engineering

Coordinator 1995-‐2010

12 Metal forming Lab, Dept. of Mechanical and Manufacturing Engineering

Coordinator 2001-‐ 2008

13 Dept. of Mechanical and Manufacturing Engineering Universiti Putra Malaysia

Associate Professor

August 1998-‐August 2007

14 Department of Mechanical and Manufacturing Engineering Universiti Putra Malaysia

Head of Department

Jan 1995-‐August 1998

D. Teaching

Teaching Courses

Code Course Name Institution KMP 3001/EMM3701/EMM3712

Manufacturing Process I UPM

KMP 3003/EMM3702/EMM4702

Manufacturing Process II UPM

EMM 3008 Powder Metallurgy UPM KMP 3005/EMM3005 Tools Engineering UPM EMM 3807 Machine Tool Technology UPM KMP 3803 Automation II UPM KMP3508 Robot Dynamic UPM KS311 Fluid Mechanics 1 UPM

/80

KS 353 Material Engineering UPM KS 373 Fabrication and Production UPM KMP 5001/EMM5701/5702

Advanced manufacturing Processes UPM

EMM 5708 Automation and Robotics UPM EMM5602 Total Quality Management UPM EMM 5616 Maintenance Management UPM KCEP 3302 Tools Engineering (Mould and Die) UM

E. Supervision of Students

Level Graduated / Completed On-‐going

Chairman/Main Supervisor

Committee/ Co-‐Supervisor

Chairman/ Supervisor

Committee/ Co-‐Supervisor

PhD 16 29 6 10 MSc 20 16 0 2 MEng 105 -‐ 2 -‐ BEng 81 -‐ 2 -‐

PhD Completed (Supervisor) No. Name Thesis Title

Year

Graduated 1. Ahmad Kadmose

Aldeehani (GS43396) Integrated Green Halal Supply Chain Management in Food Manufacturing Industry

2019

2. Rosmamuhamadani bin Ramli (GS34430)

Characterization and mechanical properties of in-‐situ titanium diboride fibre reinforced aluminium copper alloy composites

2016

3. Ishak Mohmad Ali (GS32496)

Mechanical Properties of Propeller by vibration casting

2016

4. Jamshid Nemati GS28431

Mechanical properties of ultra-‐fine grain Aluminium Al6063 and pure copper processed by equal channel angular extrusion method

2015

5. Hani Mizhir GS29903

Improvement of the Mechanical Properties of Aluminium Alloys and Composite Extruded parts

2015

6. Nanang Fatchurohman GS26836

Manufacturing process and material selection using modified multi criteria decision making for brake disc

2014

7. Azhar Abdullah GS19228

Mechanical properties of Tin Mine tailing sand for greensand casting mould

2013

8. Taufik Saroni GS22022 Development of non-‐linear thermal expansion model for casted Aluminium Silicon Carbide

2012

/80

9. M.Sayuti GS20480 Properties of Titanium carbide reinforced aluminium silicon alloy matrix

2012

10. Daryoush Safarzadeh GS18284

Design an development of a self-‐propelled hydraulic floor crane

2012

11. Mohamed A.Abdulmawlla Jolgaf GS16483

Optimization of closed die forging process 2011

12. Elfetori F. Abdewi GS13364

Design of composite tube subjected to quasi-‐static and dynamic impact loadings

2007

13. Thoguluva Raghavan Vijayaram GS1340

Properties of Metal matrix Composite of Aluminium – 11.8% Silicon Reinforced with different particulates

2006

14. Lim Ying Pio GS11777 Effects of grain refinement on the cooling rate, and microstructural and mechanical properties of Al-‐Si sand casting

2006

15. Ooi Chee Keong Development of thermal and flow analysis in Metal matrix composite casting

2005

16. Rosnah Mohd Yusof Implementation of Advanced Manufacturing Technologies (AMTs) in the Small and Medium Scale Industries (SMIs) of Malaysia

2002

PhD Completed (Co-‐Supervisor) No. Name Thesis Title

Year

Graduated 1. Teo Hiu Hong

(GS31074)

Manufacturing System Engineering 2019

2. Eisa A E b AlostadHong (GS43394)


3. Khaled H M A Alkandari (GS43395)


4. Ahmed Ali M. Khan (GS44222)

Industrial Engineering 2019

5. Khairul Nizam Md Tohit (GS35798)

Identifying Inconel 718 fasteners failure using structured probem solving method

2018

6. Qasim Mhalhal Azpen (GS39560)

Reinforcement and hot workability of aluminium alloy 7075 particulate composites

2018

7. Mohd Shahrizan bin Yusoff (GS38448)

Lean Engineering in Automotive Industry 2018

8. Bala Gambo Jahun (GS37351)

Automated traction tyre system of Agricultural machineries

2018

9. Mehran Tamjidy Multi-‐Objective Optimization of Friction Stir 2017

/80

(35754) Welding Process Parameters of AA6061-‐T6 and AA7075-‐T6 Using a Biogeography Based Optimization Algorithm

10. Mohamed Serdah M (GS37298)

Variable Valve Timing Optimization by Using Electromagnetic Solenoid in the Engine

2016

11. Mohd Uzair bin Mohd Rosli (GS30204)

Development of value added engineering concept generation for automotive parts

2015

12. Shahla Paslar (GS31529) Development of hybrid dynamic scheduling model for flexible manufacturing system

2016

13. Mohd Azaman Md Deros (GS32933)

Development of Thin wall natural Fibre Composite 2015

14. Muhammad Yusuf (GS22333)

Cutting parameter optimization for aluminium LM6 composite using design of experiment method

2013

15. Amer Najat Najmaldeen Kakahy (GS28436)

Design and development of an integrated slasher (Pulverzer) fro sweet potato harvester

2013

16. Mohammad Reza Shahraki (iGS18304)


17. Ali Hashemi (GS21422) Agricultural Machine design

2012

18. Mohammed Shu’aibu Abubakar (GS21830)

Machine Design 2012

19. Mehrdad Nikbakht Eliaderany (GS21374)

Supply chain Management in Oil Industry 2012

20. Fatai Bukola Akande (GS21068)

Motion resistance analyses of towed narrow wheels 2011

21. Md.Akhir Hamid (GS15631)

Development of Sweet potato harvester

2011

22. Mohammadreza Vasili (GS18909)

Development of load shuffling and travel time model for miniload sutomated storage and retrieval system with open-‐rack structure temperature for turning operations.

2011

23. Gholamreza Ismailian (GS17989)

Line Balancing of Production line. 2010

24. Suditama (GS05827) Analysis of Thermal Storage Material and Heat Transfer Characteristics

2008

25. Fayiz Yousef Mahmoud Abu Khadra (GS12543)

Metamodelling Technique of metal forming process

2006

26. Ooi Chee Keong (GS02448)

Improving Flexibility in Manufacturing using a Family Ordering System for long lead time

2005

/80

components

27. Elnougomi Abd. Elgadir Omer

Design, Fabrication and Performance Test of a Peanut Harvesting Machine

2000

28. Tang Sai Hong Rapid Prototyping using a Precision Robotic Manipulator

2000

29. Faizal Amri The performance of a disk plow combined with a rotary blade in wet soil

1997

PhD Progress (Supervisor)

No. Name Thesis Title

Expected Year to be

Graduated 1. Subramaniasarma a/l

Sreenivasan (GS31060)

BMC Kenaf Reinforced Polymer 2020

2.

Zolkarnain bin Marjom (GS41838)

Composite Casting Technology 2020

3.

Almukhtar. Ib. A. Aljermi. (GS42636)

Casting: Improvement of Al Cu Composite 2020

4.

Zatil Aqmar binti Zulkifli (GS40943)

Wettability in Casting Process 2020

5.

Mohammad Sh I A M I Alhajji (GS49070)

Integrated maintenance management in Sport Facility

2020

6.

Rami Abdulhakeem Hasan Ba Raidah (GS47641)

Integrated maintenance management in Halal Food

2020

PhD Progress (Co-‐Supervisor) No. Name of Students and

Title of Thesis/Project Thesis Title

Year Expected

to be Graduated

1. Teo Hiu Hong (GS31074)

Industrial Engineering

2019

2. Jethesh Prabhakaran (GS31899)


3. Mageswaran a/l Arunasalam (GS36238)

Manufacturing Engineering 2020

4. Bt Iskandar Zulkarnain bin Baharudin

Manufacturing system Engineering 2020

/80

(GS37694)

5. Mohd Asnawi Omar (GS45040)

Rapid Prototyping 2020

6. Norazlan bin Samsudin (GS48018)

Material Engineering 2020

7. Muhammad Anas bin Mohammad Sayuti (GS48502)


8. Turki S A H Al-‐Qahtani (GS49057)


9. Adel S M A Alsaeed (GS49059)


10. Negin Ashrafi (GS49138)


Master of Science Completed (Supervisor)


Year Graduated

1. Mona Kiaee (GS22043) Development of Squeeze casting

2015

2. Hafizal Abu Bakar (GS12123)

Design and Fabrication of three component balance of wind tunnel

2012

3. Suraya Sulaiman (GS22223)

Metal flow and solidification of casting process 2011

4. Nanang Fatchurohman (GS19360)

Molten metal flow and solidification of casting process 2010

5. Mostafa Badakshan (GS18160)

Optimization of simultaneous scheduling for machines and automated guided vehicles using fuzzy genetic algorithm

2009

6. Ehsaanreza Bagherian (GS 19723),

Development of a ceramic foam filter for filtering molten aluminium alloy in casting processes

2009

7. Pooria Matoorian (GS16823)

Development of Super Alloy machining 2008

8. Khairul Nizam Md. Tohit (GS13383)

Improvement of accuracy level of automotive front fender shield assembly using process failure mode and effect analysis and control plan techniques.

2006

9. M. Sayuti (GS12364) Mechanical properties and characterization studies on the ascast quartz particulate reinforced LM6 alloy matrix composites

2006

/80

10. Wong Choon Tat Design and fabrication of plastic injection mould

2004

11. Kader Ibrahim Ab. Wahab

Wafers fabrication of bipolar transistor 2003

12. Mohamad Irwan Yahaya

Reverse Engineering of free-‐form surfaces 2003

13. Edi Sham Zainudin

Numerical Invesigation of Fibre Reinforced Polymer 2002

14. Azman Senin Optimisation of machining parameters in Wire Cutting Process for Cooling Jig

2002

15. Mohd. Razali Samin Robot Manipulation Tracjectory Planning in Complex Position

2002

16. Mohd Khairol Anuar bin Mohd Ariffin

Design, Fabrication and Analysis of Plasting Injection Moulding Mould

2001

17. Alex Lim Kheng Hooi Thermal Analysis of Two and Three-‐gate Sand Casting Mould

2001

18. Elfetori F. Abdewi Using FEM in Optimisation of Die Casting Design

1999

19. Md Samsul Abedin Computer Aided Engineering in diecasting design

1997

20. Ng Yu Ting Development of Auto Wire Bonder Expert System

1997

Master of Science Completed (Co-‐Supervisor)


Year Graduated

1. Hamdan Yahya Ahmed Al-‐Ruhaimi (GS27013)

Automated approach for oil palm in vitro shoot sorting

2014

2. Seyed Ehfarzaneh Nojabaei (GS26533)

Development of priority oriented scheduling method to increase the efficiency and reliability of manufacturing system

2009

3. Mohd Fauzi Hashim Rigid Plastics FEA in metal forming processes

2007

4. Mohandas a/l Krisnan Design and development of labour productivity monitoring system in manufacturing

2007

5. Sharifah Imihezri Syed Shaharudin (GS12124)

Clutch pedal design and fabrication for Injection moulding for polyamide-‐based short fibre reinforced composite

2005

6. Lee Hoo Boon Rapid Prototyping system of composite material products

2003

7. Pitoon Nopnakorn Development of 2D CAD software based on ISO technical drawing standard

2003

8. A.K.M.Parves Iqbal Development of an intelligent painter robot using 2002

/80

Cartesian coordinate approach for construction industry

9. Tan Chee Fai Development of hole recognition system using rule-‐based technique

2001

10. Mohd Ahadlin Mohd Daud

The Evaluation of Mechinablity and Surface Texture of Tool Steel with Copper Electrode in Electro Discharge Machine

2001

11. Ten Seng Teik Emulation of the Space Robotics System on Earth

2001

12. Mohamed A.Abdulmawlla

CAD/CAM system for closed die forging Process 2000

13. Elsadiq Mahdi Ahmed Saad

Design and Fabricate filament winding machine and analysis of cotton/epoxy and pandanus/epoxy

1997

14. Mohabatul Zaman Bukhari

Development of no-‐clean solder for Radio Frequency power module

1996

15. Shafina Sultana Simulation-‐based analysis of kinematics, dynamics and control of space robots

1995

16. Wan Tarmeze Wan Ariffin

Strength and Stiffness of joints in rattan furniture 1994

Master of Science in Progress (Co-‐Supervisor) No. Name of Students and

Title of Thesis/Project Thesis Title

Year Expected

to be Graduated

1. Nur Liyana binti Mat Hussin (GS43760)

Microsructural studies and shear property of Sn-‐Ag-‐Cu lead free solder reinforced with carbon nanotube

2020

2. Amirah binti Rosman (GS48616)

Inventory management system for maintenance equipment using RFID technique

2020

Master of Engineering Completed (Supervisor – Without thesis)

No Name Thesis Title

Year Graduated

1. Talal Hassan Alshammari

Recycle base oil quality guidelines for the kingdom of Saudi Arabia

2019

2. Ammar Emhemad Ezzaedi

Green food packaging in supply chain : case studies on Nestle and Kraft foods

2019

3. Shakib Hyder Resource levelling optimization in manufacturing Industry

2019

4. Pravinaa Sooranaranan Flow induced vibration in barred tee’s for launchers 2019

/80

in oil and gas industry

5. Ali Hameed Ahmed Factors affecting the contractoris BID/NO BID decision on the Yemeni construction projects

2018

6. Muhammad Muaz Abu Bakar

Aluminium alloy hybrid metal matrix 2018

7. Mohamad Ihsan Abdul Hamid

The role of total productive maintenance (TPM) in increasing the productivity and efficiency in industry

2018

8. Thaer Zuhair Abdul Razzaq

The effect of composite material distribution and shape optimization on energy absorption system

2018

9. Muhammad Fariz Fadzil hermal – induced defects in casting and optimization for manufacturing

2017

10. Azaza Baheddine Maintenance Management of UPM Stadium 2017

11. Rahaf Ali Muhammad Construction waste in JORDAN causes and factors 2017

12. Nurul Ashikin Shahri Improvement of wind system in motorcycle safety gear dryer

2017

13. Hussein Raheem Hussein

Numerical investigation of heat transfer enhancement by using nanofluid in double pipe heat exchanger with rod insert

2017

14. Walid A.M. Abotbina Study the effect of nozzle-‐to-‐plate spacing on heat transfer and fluid flow of jet impigment

2017

15. Ashham Mohammed Anid

Numerical investigation on heat transfer enhancement in a heat exchanger tube fitted with inclined vortex ring

2017

16. Melvin Lain Zhimin Case Study on Construction of a Hydrodam in Malaysia : Tembat DAM

2017

17. Unida Izdihar Md Dun Design and development of stopper of elevation panel for lifting operation of central processing platform (CPP) jacke

2017

18. Illinadila Mohammad Khalid

Impelamentation of Project management system 2017

19. Chong Kai Loon Design and fabrication of smart SMT (Surface mount technology) lin

2017

20. Mohammad Syaiful Shariff

Direct materials wastage reduction for transfer molding in semiconductor industry

2016

21. Wan Mohd Zulhilmi Lightweight chasis for two way radios using thixomolding magnesium alloy.

2016

22. Fairul Ariffin

Effect of water quality during mould cooling to the mould serface of metal slab in thin casting process

2016

/80

23. Fuan Han Seng Air quality control on kitchen exhaust

2016

24. Mohd Zuhaifi Zainol Effect of warm peening on fatique performance of SAE 9254 steel

2016

25. Turki Salem Mohsen Al-‐Kaf

Image processing for blood vessel segmentation in retina

2016

26. Hassan jabbar Hayawi Numerical simulation of heat transfer ro nanofluids flow in ribbed channel

2016

27. Wan Norizawati Wan Isahak

Automated visual inspection system for detection in diodes manufacturing

2016

28. Mohd Nawawi Ahmad Simulation of hybrid cooling method using thermoelectric cooler in electric cooling

2016

29. Mohd Kamarul Nizam bin Mahmood

Effect of Post Weld Heat Treatment Microstrcuture and Mechanical Properties of Carbon Steel Plate

2015

30. Amjad Ashor Mohamad The Effect of Air Bleed on Jet Engine Performance

2015

31. Khairil Amri bin Kamaruzzaman

Impact of Corrosion Coatings on Exposed Structures

2015

32. Ahmed Ali M. Khan Total Quality Management in Industry

2015

33. Kong Yoke Yoon

A Study of Quality Control as a Competitive Tool for Small Scale Enterprises in Selangor

2015

34. Mohd Shafei San Design and fabrication of food automated system

2014

35. Ismi Aishah Ishak Service Quality/Management Engineering

2014

36. Ili Marini Zainal Abidin Implementing Lean Six Sigma For Process Improvement

2014

37. Masni Ahmad Basri Service Management in MAS

2014

38. Halimaton Nabilah Mohd Husin

Total Quality Management in Food Industry 2014

39. Rami Abdulhakeem

Maintenance Management in SME 2014

40. Mohamad Juraidi Jamal Natural composite material

2014

41. Mohamad Shahidan Machine maintenance

2014

42. Noor Diyana Dahlan Plastic Injection Mould

2014

43. Rosidah Mohd Norsat Computational Analysis in Manufacturing Process

2014

44. Marwan Mat Salleh Analysis of Used Polytops From Schools in Malaysia

2014

45. Joshua Raj Solar Powered Car Ventilation System 2014

/80

46. Mohd Norhan

GS33725 E-‐Procurement Integration:Impediment Face by Malaysia's Automakers Vendors

2013

47. Safwan Azizi GS34652

Design of Plastic Injection Mould for thick wall product

2013

48. Mohd Firdaus Dzulkafli GS32797

Maintenance Strategy Application in Industry

2013

49. Zatil Hafila Kamaruddin GS33602

Metal Casting Process 2013

50. Emeyusrezal Daud GS34894

The Development of Green Tech in Aotumotive Industry in Malaysia-‐Development Green Vehicle in Proton

2013

51. Zatil Hazrati Kamaruddin GS33609

Fabrication of Skid Tank

2013

52. Zulkefli Ismail GS34381

Hot Rolled Coil at The Steel Making Plant -‐The Quality Problems

2013

53. Nazarul Abidin GS32796

Failure Analysis in Manufacturing Machinery / CAD CAM

2013

54. Nasuha Menhat GS32649

Smartphone features among UPM students 2013

55. Nur Atiqah Nik Shamsudin GS32658

Smartphone usage and the implecations among UPM’s students

2013

56. Noor Syarida Abdul Rahman GS32912

Students satisfaction towards service quality of front counter staff in private university

2013

57. Lim Ying Shing GS33076

Brand switching behavior over laptop brands among UPM students

2013

58. Saeid Pourseifaddini GS31290

An approach to long-‐term recovery procedure as part of local disaster recovery management: A study on earthquakes Zarand, Iran 2005.

2013

59. Alireza Rashidi GS33180

Application of value stream mapping in the furniture company

2013

60. Ong Yu Lee GS33061

Development of a program to calculate plastic material property for non linear FE Analysis

2013

61. Esadig Abdalla Mohammed Bushara GS31345

Fast moving consumer goods productivity improvement

2012

62. Seyed Sattar Emamian Failure Analysis of Welding process 2012

/80

GS30919

63. Nurul Zanariah Kolan GS31467

Maintenance IT equipment in training institute in Malaysia

2012

64. Mirmani Mehrbakhsh GS29222

casting in jewellery (loss wax investment casting)

2012

65. Amir Sayah Roshan Zamir GS31916

FEA in pressure vessel 2012

66. Farbod Redaei GS29281

Construction project management

2012

67. Sorosh Borozjani GS31299

FEA and improving wind turbine

2012

68. Hamed Niakan GS31711

Supply chain management

2012

69. Murugiah Sivasubramaniam

Back surface scribe ID for 200mm wafer fabrication 2011

70. Megat Mohd Amzari Megat Mohd Aris

Analysis of 2-‐stroke small engine emission system 2011

71. Firdaus Mohamed Sahid Chips formation and tool wear characteristics of turning operation

2011

72. Syarina Sharuddin

Analysis of plastic Injection moulding process 2011

73. Ishak Mohamad Ali

Integrated Fluid Parametric Analyser 2010

74. Zaidil Abdilla Ahmad Salehuddin

Project management of boat building and repair 2010

75. Noorhazilah Baharin Risk management – irrigation project using pressurized piping system

2010

76. Subramaniasarma a/l Sreenivasan

Simulation of thermoset manufacturing process 2010

77. Muhamad Hasnulhadi Mohamad Jaafar

Optimization of cutting parameter of tungsten carbide tool life turning process

2010

78. Safari Hj Mat Desa Project management in hatchery rainfall building system

2010

79. Zailani Zainal Abidin

Solid lubricant in machining process 2010

80. Nazrol Hj Mait

Comparison of dies to produce similar products 2010

81. Shamsuddin Man

Process parameter for rectangular deep drawing

82. Mohd Zairulnizam Mohd Zawawi

Analysis of an injection moulding parts using MoldFlow (feed system)

2010

/80

83. Roslan Mohamad Sharip Design of single cavity hot runner mould for juice cup

2010

84. Farah Zaheeda Kamaruddin

Diecasting Finishing surface 2010

85. Mahsa Hosseini Risk based maintenance in Unit 4 Steam Generator of Bandar Abbas Power Plant

2010

86. Syahrunizam Buyamin

Inventory Management System 2010

87. Sohaimi Pawanchi Improvement of CAD/CAM CNC process of gasing production

2010

88. Kaveh Faghihi Customer Knowledge Management

2010

89. Abdalsalam I. Fadeel Development hybrid software between visual basic and CAD/CAM for gasing

2010

90. Ahmed Osman Ahmed Babkir

Failure and successful strategic management in business Control and automation of manufacturing system

2010

91. Umar Ali Umar RFID: Control and automation of manufacturing system

2009

92. Mah Way Sheng Quality Management system

2009

93. Ahmad Rosli Abdul Manap

Design of PIM for gasing 2009

94. Zakaria A.Razak Study of 3D mouldflow analysis for plastic spinning top (gasing)

2009

95. Mohamad Oukal Alghali Fundamental characteristics of metal flow in casting mould of aluminium alloys

2008

96. Ahmed Alabedelah Design and development of Keyboardless Book-‐Style Notebook

2008

97. Mohd. Afandi Six Sigma project of Moulding Defect Reduction

2008

98. Mohammed Omran Wafi

Wettability of MMC 2007

99. Tarek Marwan Development of SiC reinforced MMC

2007

100. Zan Zainudin Die design and fabrication

2007

101. Amizi Noor Job-‐shop sequencing for small press shop

2007

102. Adel Abulgasm Lahimer Automated system of a Composite product fabrication

2007

103. Yuslan Yasok Design and development of press tool die for sheet metal product

2006

104. Azmi Harun Design and Analysis of mould for Plastic Injection 2006

/80

Bachelor of Eng (Mechanical) Completed (Supervisor)


Year Graduated

1. Jason Charles Rao Effect of Strontium and Vibration on the mechanical properties of Aluminium sand casting

2019

2. Edric Lo Zin Yiah Thermal and flow effect in casting process

2018

3. Nur Amani Abdul Nasir Simulation of casting process

2018

4. Mohammad Marwan Nazamdin

Effect of Strontium, vibration and heat treatment of Aluminium casting

2017

5. Noramalina Rosdan Casting of LM6

2017

6. Osama Alsaied Abdalla Eltaher

Plastic Injection Moulding parameters for high thickness and volume product

2016

7. Akram Saeed Aljaberi

Mechanical Propertiesof Al alloys vibration casting 2016

8. Syed Zaki Ahmed Improvement of metal properties by vibration casting technology

2015

9. Mohammad Afeef RP of polymer based Tops (Gasing)

2015

10. Mustika Ayu Muayanti Design and fabrication of rope machine

2014

11. Mohammad Zafirul Haris

Rice hush reinforced polypropylene composites 2014

12. Shanmugaprian Rajasagaran

Design and Fabrication of sundial 2013

13. Mohamad Asyraf Yusof Fabrication of plastic injection mould

2013

14. Shawali Mechanical properties of Aluminium extruded parts

2012

15. Firdaus Sand mould vibrator

2012

16. Faiz Design and improvement of fuel furnace

2012

17. Kamrul Design and fabrication of fuel furnace 1

2011

18. Azedi Design and fabrication of fuel furnace 2 2011

Moulding

105. Nur Elya Total Quality management in Perodua

2005

/80

19. Mohammad Fathullah Proton parts analysis

2010

20. Khairil Hazri Analysis and improvement of proton brake system 1

2010

21. Firdaus Lokman Al Hakim

Analysis and improvement of proton brake system 2

2010

22. Mohd Affindy Application of CAD/CAM in Spinning top (gasing) production

2009

23. Mohd Sharil Production of thermoplastic spinning tops (gasing)

2009

24. Erdy Herwan Design and fabrication of ropes (for spinning tops) machine

2009

25. Mohd Nasrol Design and fabrication of spinning tops (gasing) machine

2009

26. Radha Krishnan a/l Ponnan

Manufacturing of composite corrugated tubes 2008

27. Logeswaran a/l Kuppusamy

Core and pattern making of castings 2008

28. Fatin Suhana Mohd Ali

Metal flow and solidification of casting process 2008

29. Muhammad Firdaus Hamad

Characteristics of Green sand casting 2007

30. Mohd Azril Affindi Development of Squeeze casting products

2007

31. Karthik Poobalan Squeeze Casting process

2006

32. Weldaud Tulus Fabrication of composite products

2006

33. Lee Chee How Thermal Analysis of Casting process

2006

34. Ardy Affendy Squeeze casting for MMC

2006

35. Loo Boon Kian Experimental studies on bullet-‐proof vest (Kevlar) with different stitching patterns

2005

36. Mohd Nazarudin Amir Kajian pembentukan vortex dalam pengacuan cecair komposit matrik logam (Study of vortex development in stirring of metal matrix composite)

2005

37. Ilani Yaacob Experimental investigation of 3-‐Component Balance

2004

38. Harliza Mohd Yusof Fan system of Wind Tunnel

2004

39. Ahmad Mortaza Pattern making using CAD/CAM system

2004

40. Afdiman Anuar Mechanical engineering services in construction industry

2003

/80

41. Mohd Nadzru Abd. Rahman

Development of casting software

2003

42. Mohd Aatif Ali Mokhtar Development of emergency tube for motorcycles 1

2003

43. Mohd Rizal Adnan Development of emergency tube for motorcycles 2

2003

44. Md. Shahril Mohamad Ambia

Kajian Keupayaan relau induksi di Makmal Foundri, (Study of Induction Furnace Performance II)

2002

45. Yusman Suratman Kajian Keupayaan relau induksi di Makmal Foundri (Study of Induction Furnace Performance 1)

2002

46. Hazarudyn Syah Halim Development of three components balance for wind tunnel 1

2002

47. Mohd Aznor Lamat Development of three components balance for wind tunnel 2

2002

48. Khairul Arif Ahmad Mahir

Development of sand casting process 2002

49. Mohamad Zamri Jahaya Emergency Tube System for Motocycles

2001

50. Leong Yew Boon Software Development of Flow Analysis of Casting

2001

51. Hafizal Abu Bakar Design and Fabrication of Wind Tunnel Instrumentation

2001

52. Liom Hong Seng Software Development of Thermal Analysis of Casting

2001

53. Muhammad Faizal Johan Analisa Aliran Proses Acuan Suntikan Plastik (Analysis of process flow in Plastic Injection Moulding)

2000

54. Tan Chen Loon Eksperimentasi Analisa Haba Dalam Proses Penuangan Pasir (Experimental analysis of heat transfer in sand casting process)

2000

55. Lai Tze Siung Thermal Analysis of Sand Casting

2000

56. Goh Chin Hoi Design and Fabrication of Plastic Injection Mould I

2000

57. Chong Joo Kwong Design and Fabrication of Plastic Injection Mould II

2000

58. Liew Chee Kin Runner system in Plastic Injection Moulding

1999

59. Lim Wei Siang CAD/CAM application in Plastic Injection Moulding 1

1999

60. Mohd Khudzairi Hj Razali CAD/CAM application in Plastic Injection Moulding 2

1999

61. Shahid Sham Md Nor Product development in Plastic injection moulding 1

1999

62. Azaham Mohd Razali Product development in Plastic injection moulding 2

1999

63. Hassan Fahmi Miskam Molten metal flow in casting process

1999

/80

64. Amirudin Abdul Aziz Thermal analysis of sand casting

1999

65. Md. Fauzi Ismail A study on successful certification of ISO 9000 for Manufacturing Companies

1998

66. Mohd Badli Hj Ibrahim Experimental preparation of thermal study in sand casting process

1998

67. Irwan Mohd Amir Design and fabrication of mould for plastic injection moulding 1

1998

68. Yusri Yusoff Design and fabrication of mould for plastic injection moulding 2

1998

69. Aminuddin Abd. Aziz CAD/CAM application in mould making

1998

70. Alias Ahmad An application of robot and conveyor belt for automated handling system

1998

71. Safry Matnor Design, Fabrication and Testing of a weather strip machine

1997

72. Majid Yahya Development of CAD/CAM of casting process

1997

73. Mohd Arifin Samingun Mould testing and investigation of flow characteristics of injection moulding machine

1997

74. Chin Yong Keong Design and Development of an automated orientation detection system with robot arm and Programmable Logic Control integration

1996

75. Wan Shaifuddin Wan Hashim

Analisa terma pemejalan dalam proses penuangan (Thermal analysis of solidification in casting process)

1996

76. Daniel Sahari Rekabentuk dan pembinaan acuan mesin pengacuan suntikan plastik (Design and fabrication of a mould for plastic injection moulding machine)

1996

77. Abdul Razak Jaafar Analisa aliran logam dan perbandingan dengan eksperimen (Metal flow analysis and comparison with experimental results)

1996

78. Ahmad Rashidi Sabudin Kajian aliran plastik dalam mesin pengacuan suntikan (Study of plastic flow in plastic injection moulding machine)

1995

79. Tang Sai Hong Gating system design in sand casting

1995

80. Tham Chee Keen Computer aided fluid flow analysis of the filling of casting system

1994

81. Saravanan s/o Manickam Analysis of molten metal flow in the feeding system of pressure diecasting

1993

F. Research, Consultancy and Patents

/80

a. Research and Grant

Total Accumulated Funding : RM8,225,767 Local Government Funding : RM5,765,767 International Funding : RM2,460,000

No Duration Title Funding Amount(RM) Designation

1. Aug 2016-‐Sept 2018

International Research with University for Kuwait Project

Kuwait RM360,000 PI

2. Nov 2015-‐Oct 2017

In-‐situ Titanium Diboride (TiB2) reinforced by Aluminium Alloy hybrid Metal matrix composites

FRGS RM104,000 PI

3. Jan 2016-‐ jan 2018

The customers expression towards the design profile and attributes of products

Research Acculturation Collaborative Effort (RACE)

RM70,000 PI

4. 2014-‐2015 Mathematical Modelling of Flow and Heat Transfer for Casted Aluminium Silicon Carbide

Research Acculturation Collaborative Effort (RACE)

RM70,000 PI

5. June 2013-‐Oct 2015

Characterization and development of natural fibre reinforced unsaturated polyester based injection moulding composite material for electrical insulation application

FRGS RM90,500 PI

6. Feb 2011-‐Dec 2013

Investigation on the tailing sand (pasir bekas lombong) from ex-‐tin mines in Peninsular Malaysia dor use in making green sand casting mould

FRGS RM52,000 PI

7. March 2011-‐Dec 2013

Mecahnical properties of MMC LM6 reinforced titanium carbide using Mechanical vibration mould sand casting.

UPM RUGS RM134,500 PI

8. Oct 2010-‐June 2013

Aluminium alloy properties improvement in extrusion process


9. Nov 2007-‐ Oct 2009

Analysis of molten metal, solidification and the effect of vibration of metal matrix composite (MMC) materials in casting process

FRGS RM114,500 PI

/80

10. Oct 2007-‐ Sept 2009

Manufacturing of metal matrix composite by squeeze casting technology for automotive applications

Sciencefund RM154,400 PI

11. July 2007-‐ Jun 2009

Metal flow and Solidification of Casting Process


12. April 2007-‐March 2010

Microstructure and mechanical properties of squeeze cast A356 Al-‐Si alloy inoculated with TiC

ScienceFund RM92,498 PI

13. March 2004-‐ Oct 2005

Study of Lift and Drag Forces of Aerodynamic Shapes in the Low Speed Wind Tunnel


14. Jan 2002-‐Dec 2006

Development and Analysis of Casting Product using Network Method of Flow and Solidification Process

IRPA Experimental Applied Research

RM168,000 PI

15. Jun 2002-‐Jun 2003

Design and Fabrication of Three-‐Component Balance of Wind Tunnel.

UPM Short Term Research Project

RM15,000 PI

16. Jun 1999-‐ Jun 2000

Design and Fabrication Wind Tunnel Instrumentation


RM10,000 PI

17. Jun 1999-‐ Jun 2000

Design and Fabrication of Plastic Injection Mould


RM15,000 Pi

18. August 1995-‐ Jan 1997

Development of Research Model to monitor skill demand for Metal Machining Industry

Ministry of Human Resources of Malaysia

RM159,471 PI

19. 1996-‐2000 Finite Element Modelling of Casting Process

IRPA -‐MOSTI RM268,000 PI

20. Oct 1995-‐March 1996

Pre-‐stressed Fabrication Process for Filament Winding Tubes

University of Akron and Asian Development Bank

US15,000 PI

21. 1991-‐1995 Finite Element Analysis for Stress, Thermofluid and Vibrations

IRPA-‐MOSTI RM550,000 PI

22. 2019-‐2021 The Synergistic Effects of Graphene Nanoparticles and Chilled Air Cooling on Machinability of Nickel-‐Titanium Shape Memory Alloys

FRGS (UNIMAP)

RM100,000 Co

/80

23. 2019-‐2021 Formulation of 7075 wrought aluminium optimum processing parameters model based on parametric thixotropy approach through semisolid metal processing

FRGS (UMP) RM100,000 Co

24. 2019-‐2021 Elucidate the interaction mechanism of Al-‐1061 coating and nano-‐Al2O3 reinforcement to the mechanical strengthening on the Mg AZ91A metal matrix composite

FRGS (UMP) RM88,320 Co

25. 2019-‐2021 Enhancement of Mechanical Properties of Al-‐Metal Matrix Composites by Grain Refinement with ZrB2 and Sc

RACER RM71,200 Co

26. 2014-‐2016 Parameters Optimization For Machining CFRP-‐Aluminum Composite Laminates

Science Fund (MOSTI)

RM151,000 Co

27. 2012-‐2014 Development of an integrated Value Added Engineering methodology for Automotive Parts

FRGS RM68,000 Co

28. July 2007-‐Jun 2009

Development of Combinatorial Optimisation for Cutting tool path strategy

UPM RUGS RM70,000 Co

29. 2010-‐2012 Development of a Novel Evolutionary Algorithms for AGV Dynamic Routing In FMS Environment

RUGS RM55,000 Co

30. 2009-‐2011 Value Engineering link-‐up with university program Proton saga

PROTON RM30,298 Co

31. 2007-‐2009 Development of Combinatorial Optimisation for Cutting tool path strategy

RUGS RM70,000 Co

32. 2007-‐2009 Cutting Tool Path Optimisation Using Evolutionary Algorithm

FRGS RM100,000 Co

33. 2007-‐2008 Simulation of Cutting Tool Path Strategy for Thin Walled Section Part

NLSG (UPM) RM10,000 Co

34. 2007-‐2009 Analysis of flow and solidification of casting process

RUGS RM83,000 Co

35. 2002-‐2006 Damage Management of Sheet metal Forming Using Virtual Manufacturing

IRPA -‐ MOSTI RM168,000 Co

36. 2002-‐2006 Development of Artificial Intelligent (AI) Based Expert System for


/80

Optimum Turning Process

37. 2002-‐2006 Concurrent Engineering Manufacturing System of Polymeric – Based Composite Automotive Pedal Box


38. 1991-‐1995 Computer Integrated Manufacturing (CIM)

IRPA -‐ MOSTI RM2,000,000 Co

Fellowship Grant

No. Duration Title Funding Type Designation

1. Jan 1994-‐April 1994

Research attachement with Beijing University

UNESCO (USD 30,000)

Travel and other expenditure

Researcher

2. March 1995-‐May 1995

Research Attachment with Swansea University and Casting Industry

Asian Development Bank (USD50,000)

Research fund, Travel and other expenditure

Researcher

3. Oct 1995-‐March 1996

Research Attachemnt with Akron University, Ohio USA

Asian Development Bank (USD50,000)

Research Fund, Travel and other expenditure

Researcher

b. Consultancy No Durati

on Title Funding Designation

1. 2015-‐2019

Reference Module of Material Science and Enginineeirng

Elsevier Editor/Reviewer

2. 2012-‐2014

Kuantan (Master of Manufacturing System Engineering)

Kuantan Program

Expert (Teaching Courses – Advanced Manufacturing Process and Technology and Automation and Robotic)

3. 2012-‐2014

Kuwait (Master of Engineering Program)

Kuwait Program Expert (Teaching Course – Automation and Robotic and Total Quality Management)

4. 2002-‐2014

Evaluation of final exam paper of INTI

INTI University Expert (Engineerring Courses)

5. 2010 Engineering Design Course

UPM Education & Training Sdn. Bhd.

Expert (Teaching Courses)

/80

6. 1999-‐2004

Mould and Die Technology German Malaysia Institute

External Verification of the student Project

7. 2002 Study of the pump characteristics and performance

PEDECO Management Sdn Bhd

Head (Research Contract)

8. 1994-‐1998

Development of Engineering Curriculum for MSc in Manufacturing Systems Engineering

MOTOROLA Seremban

Expert (Curriculum and Engineering Courses)

9. 1995-‐1997

Development of Research Model to monitor skill demand for Metal Machining Industry

Ministry of Human Resources, Malaysia

Head (Research Contract)

c. Patent/ Copyright/ Trademark

No Detail

Registration No Year

1. A self-‐propelled hydraulic floor crane

PI2012001330 2012

2. Plastic Made Gasing Top (Commersialiased by MJ Square Sdn Bhd)

PI2012000680 (Malaysia) 2012

3. Plastic Made Gasing Top

PCT/MY2013/000028 2013

4. Plastic Made Gasing Top (Indonesia)

P00201404828 2014

5. Plastic Made Gasing Top (Thailand)

1401004719 2014

6. Plastic Made Gasing Top (Vietnam)

1-‐2014-‐02723 2014

7. Plastic Made Gasing Top (Singapore)

11201404479X 2014

8. Plastic Made Gasing Top (Brunei)

BN/N/2014/0073 2016

9. Apparatus for producing Corrugated Composite Structure and method for making the same

PI 20063841 MY162281A

2006 2017

G. Publications

Book/Chapter in Book (Author/Editor)/Technical Report/Guidelines / Policy

1. M.S.J. Hashmi and S.Sulaiman, Material Application, Performance and Life Cycle. Reference Module on Materials Science and Materials Engineering: Elsevier Ltd, Dec 2015.

2. S.M. Sapuan, M.D. Azaman, S.Sulaiman, E.S. Zainudin and A. Khalina, Processibility in moulding thin-‐walled part using lignocellulosic fibre composite (wood polymer composite), in S,M, Sapuan (eds.) Manufacturing of Natural Fibre Reinforced Polymer Composites Hardcover 1st Edition: Springer International Publishing AG, Cham (ZG) Switzerland.

/80

3. M. Sayuti, S.Sulaiman, B.T.H.T Baharudin and M.K.A. Ariffin, Metal Matrix Composite Products by Vibration Casting Method, Reference Module on Materials Science and Materials Engineering, doi:10.1016/B978-‐0-‐12-‐803581-‐8.04082-‐0.

4. T.R. Sahroni and S.Sulaiman, Application of Nonlinear Thermal Expansion Model for Casted Alumnium Silicone Carbide, Reference Module on Materials Science and Materials Engineering, doi:10.1016/B978-‐0-‐12-‐803581-‐8.04130-‐8.

5. S. Sulaiman and S.Emamian, Optimum Speed of Friction Stir Welding on 304L Stainless Steel by Finite Element Method. In Comprehensive Materials Processing; Bayraktar, E., Ed.; Elsevier Ltd., 2014; Vol. 6, pp 227–236.

6. M. Sayuti, S. Sulaiman, T.R. Vijayaram, B.T.H.T Baharudin and M.K.A. Arifin, Manufacturing and Properties of Quartz (SiO2) Particulate Reinforced Al-‐11.8%Si Matrix Composites, Composites and their properties, Chapter 18, InTech Pub. (2012)

7. Daryoush Safarzadeh and Shamsuddin Sulaiman, “Self-‐Propelled Hydraulic Floor Crane – Design, Development and Manufacturing”, LAMBERT Academic Publishing, Saarbrucken Germany 2012. ISBN: 978-‐3-‐659-‐18991-‐3

8. M. Sayuti, S. Sulaiman, T.R. Vijayaram, B.T.H.T Baharudin and M.K.A. Arifin, (2012), Manufacturing and Properties of Quartz (SiO2) Particulate Reinforced Al-‐11.8%Si Matrix Composites, Composites and Their Properties, Intech, 978-‐953-‐51-‐0711-‐8

9. A.M.S.Hamouda, S.Sulaiman, M.Ahmadun, “Advances in Material and Processing Technologies”, Volume 1, SIRIM Press, 1998

10. A.M.S.Hamouda, S.Sulaiman, M.Ahmadun, “Advances in Material and Processing Technologies”, Volume 2, SIRIM Press, 1998

11. Shahnor Basri, Shamsuddin Sulaiman, A. Rahim Md. Amin, “Sistem Pengeluaran -‐ Satu Pengenalan (Production System -‐ An Introduction)”, Book published by Dept. of Mechanical and Systems Engineering UPM 1987

Citation Index Journals (CIJ)

Total = 237 papers JCR/Quartile and IF journal = 91 papers Citation Index Journal (CIJ) = 146 papers (Scopus and Other Index)

a. Citation Index JCR/Quartile and IF Journals

Total = 91 papers After 2007 = 59 papers 2007 and below = 32 papers

No Article Journal Year/

Quartile/ Impact Factor

1 R. Rosmamuhamadani, S.Sulaiman, M.A. Azmah Hanim, MIS. Ismail and

M.K.Talari “Characterization of aluminium-‐silicon (Al-‐Si) cast alloy refined with titanium diboride (TiB2) and Scandium (Sc)”, Journal of Mechanical Engineering, Vol SI 5(1), 62-‐70, 2018.

Mechanical Engineering

2018 Q4

IF=0.871

/80

2 S.Sreenivasan, S.Sulaiman, B.T.H.T.Baharudin, M.K.A. Ariffin and K.Abdan,

“ Physical Properties of novel kenaf short fiber reinforced bulk molding compound (BMC) for Compression Moulding”, Materials Today, 2018, 5(1), pp. 1226-‐1232.

Materials Today 2018 Q1

IF=24.373

3 Q.M. Azpen, B.T.H.T.Baharudin, S.Shamsuddin and F. Musapha , “Effect of process parameters on the surface roughness of aluminum alloy AA 6061-‐T6 sheets in frictional stir incremental forming” , Advances in Production Engineering and Management, 2018. 4.299.

Advances in Production

Engineering and Management

2018 Q3

IF=2.047

4 R.Rosmamuhamadani, M.K.Talari, Sabrina, M.Yahaya, S.Sulaiman, M.I.S, Ismail, M.A, Azmah Hanim, “Corrosion Characterization of In-‐Situ Titanium Diboride (TiB2) Reinforced Aluminium-‐Copper (Al-‐Cu) Alloy by Two Methods : Salts Spray Fog and Linear Polarization Resistance (LPR)”, Applied Physics Letters, Vol 1963, Issue 1.2018.

Applied Physics Letters

2018 Q1

IF=3.521

5 Mehran Tamjidy, B. T. Hang Tuah Baharudin, Shahla Paslar, Khamirul Amin Matori, Shamsuddin Sulaiman and Firouz Fadaeifard, “Multi-‐Objective Optimization of Friction Stir Welding Process Parameters of AA6061-‐T6 and AA7075-‐T6 Using a Biogeography Based Optimization Algorithm”, Materials 10 (5), (2017), pp 533-‐551.

Materials 2017 Q1

IF=2.467

6 Dehghan, S. , Ismail, M.I.S., Ariffin, M.K.A., Baharudin, B.T.H.T., Sulaiman, S., “Numerical simulation on friction drilling of aluminum alloy: Numerische Simulation des Reibbohrens von Aluminiumlegierunge”, Materialwissenschaft und Werkstofftechnik, 48 (3), (2017), pp 241-‐248.

Materialwissenschaft und

Werkstofftechnik

2017 Q4

IF=0.625

7 M.A.Ishak, S.Sulaiman, B.T.H.T.Baharudin and Z.N. Ismarrubie, “ Effect on Mechanical Properties of ship propeller with vibration mold castings”, (2017). Advanced Science Letters 23(5), pp. 4378-‐4382.

Advanced Science Letters

2010 Q2

IF=1.253 2017-‐scopus

8 B.T.H.T.Baharudin, Q.M.Azpen, Shamsuddin Sulaiman and F.Mustapha, “Experimental investigation of forming forces in frictional stir incremental forming of Aluminium alloy AA6061-‐T6”, Metals – Open Access Metallurgy Journal 11/2017: 7(11), 484.

Metals 2017 Q3

IF=1.704

9 N. Fatchurrohman and S. Sulaiman, “Solidification analysis in permanent mould casting of aluminium alloy LM6 reinforced titanium particulates metal matrix composite” , Materials Science Forum, Vol. 889, (2017). pp 148-‐151.

Materials Science Forum

2005 Q3

IF=0.399 2017-‐scopus

10 R.E. Ibrahim, R. Rosmamuhamadani, M.K. Talari, S. Sulaiman and M.I.S. Ismail, “Preliminary Study on Properties of Aluminium-‐Silicon (Al-‐Si) Alloys Reinforced by In Situ Titanium Diboride (TiB2)” , Key Engineering Materials, Vol 737,(2017). pp11-‐15.

Key Engineering Materials

2005 Q2

IF=0.224 2017-‐scopus

11 J. Nemati, G.H.Majzoobi, J.Pipelzadeh and S. Sulaiman, “Characterization of mechanical properties of Al-‐6063 deformed by ECAE”, Int. Journal of Advanced manufacturing Technology, 2016, 84(1-‐4), pp 663-‐672.

Advanced Manufacturing Technology

2016 Q2

IF=2.209

12 R. Rosmamuhamadani, S.Sulaiman, M.A. Azmah Hanim, MIS. Ismail and M.K.Talari, “ Mechanical and microstructure characterization of


2005 Q2

/80

aluminium-‐copper (Al-‐Cu) reinforced with in-‐situ Titanium Diborate (TiB2)”, Key Engineering Materials Vol. 673 (2016) pp117-‐125.

IF=0.224 2016-‐scopus

13 N.Fatchurrohman and S.Sulaiman, “Solidification analysis in permanent mould casting of Al-‐alloy reinforced TiCp Metal Matirx Composites”, Materials Science Forum, (2017), Vol. 889, pp 148-‐151.


2005 Q3

IF=0.399 2017-‐scopus

14 J. Nemati, G.H.Majzoobi, S. Sulaiman, B.T.H.T.Baharudin, and M.A.Azmah Hanim, “Effect of equal channel angular extrusion in Al-‐6063 bending fatique characteristics”,Int. Journal of Minerals Metallurgy and Materials, April 2015, Vol 22, Issue 4, pp 395-‐404.

Minerals Metallurgy and Materials

2015 Q3

IF=0.882

15 M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Numerical Simulation Analysis of Unfilled and Filled Reinforced Polypropylene on Thin-‐Walled Parts Formed Using the Injection-‐Moulding Process”, Int. Journal of Polymer Science, 2015, 659321.

Polymer Science 2015 Q3

IF=1.0

16 M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Optimization and numerical simulation analysis for molded thin-‐walled parts fabricated using wood-‐filled polypropylene composite via plastic injection molding”, Polymer Engineering and Science,(2015), 11(1), pp. 2531-‐2540.

Polymer Engineering and

Science

2015 Q2

IF=1.719

17 Rosmamuhamadani Ramli, Shamsuddin Sulaiman, Mohd Idris Shah Ismail, Azmah Hanim Mohamed Arif, and Mahesh Kumar Talari, “Wear Properties of Metal Matrix Composite Al-‐Cu and Al-‐Cu-‐TiB2”, Material Science Forum Vol 819 (2015) pp268-‐273.


2005 Q3

IF=0.399 2015-‐scopus

18 H. M. Magid, S. Sulaiman, M. K. A. M. Ariffin and B. T. H. T. Baharudin, Stress analysis of forward aluminium extrusion process using finite element method, Materials Research Innovations, Vol 18, s2 (1-‐5), 2014.

Materials Research Innovations

2014 Q2

IF=0.83

19 J.Nemati, S.Sulaiman, G.H.Majzoobi, B.T.H.T. Baharudin and M.A.Azmah Hanim, “Finite Element and metallurgical study of properties of deformed pure copperby ECAE at various strain rates”, Proc ImechE Part C: J Mechanical Engineering Science 2014. Vol 228(9) pp1461-‐1473.

Mechanical Engineering Science

2014 Q4

IF=0.56

20 M.D.Azaman, S.M.Sapuan, S.Sulaiman, E.S.Zainudin and A.Khalina, “ Numerical simulation analysis of the in-‐cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-‐walled parts formed by the injection moulding process”, (2014) Materials and Design 55, pp. 381-‐386.

Materials and Design

2014 Q1

IF=3.501

21 M Yusuf, M.K.A. Ariffin, N Ismail, S Sulaiman, “Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy and Particulate Reinforced Metal Matrix Composite”, Materials Science Forum 773, pp. 894-‐901, 2014.


2005 Q3

IF=0.399 2014-‐scopus

22 M Yusuf, MKA Ariffin, N Ismail, S Sulaiman, “Experimental Investigation on Surface Roughness and Tool Wear in Dry Machining of TiC Reinforced Aluminium LM6 Composite”, Materials Science Forum 773, 339-‐347, 2014.


2005 Q3

IF=0.399 2014-‐scopus

23 M Sayuti, S Sulaiman, B Baharudin, MKA Ariffin, “The Influence of Mechanical Mold Vibration on Temperature Distribution and Physical


2005 Q3

/80

Properties of Al-‐11.8% Si Matrix Composites”, Materials Science Forum 773, 195-‐202, 2014.

IF=0.399 2014-‐scopus

24 A Abdullah, S Sulaiman, B Baharudin, MKA Ariffin, N Haliza, “Mechanical Properties of Tin Tailing Sand-‐Clay Mixture from Batu Gajah, Perak, Malaysia for Making Greensand Casting Mould”, Materials Science Forum 773, 211-‐217, 2014.


2005 Q3

IF=0.399 2014-‐scopus

25 M.Syahrir Ahmad, B.T.H.T Baharudin, Z.Leman, N.Ismail and S.Sulaiman, “Thermal parameter affects on the part built using 3D printer Projet SD 3000”, Materials Science Forum Vols. 773-‐774 (2014) pp 841-‐849.


2005 Q3

IF=0.399 2014-‐scopus

26 T.R. Sahroni and S.Sulaiman, “Casting quality model for casted aluminium silicon carbide based on non-‐linear thermal expansion”, Int. J. Materials and Product Technology, Vol. 48, Nos. 1/2/3/4, 2014, pp217-‐233.

Materials and Product Technology

2014 Q4

IF=0.261

27 Amer N.N.Kakahy, D.Ahmad, Md. Akhir, S.Sulaiman and Ishak A, “Effects of knife shapes and cutting speeds of a mover on the power consumption for pulverizing sweet potato vine”, Key Engineering Materials Vols. 594-‐595 (2014) pp1126-‐1130.


2005 Q2

IF=0.224 2014-‐scopus

28 M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S.Zainudin, K.Abdan and M.R.Mansor, “An investigation of the processability of natural fibre reinforced polymer composites on shallow and flat-‐thin walled parts by Injection moulding process”, Materials and Design 50 (2013) 451-‐456.


2013 Q1

IF=3.171

29 S.Sreenivasan. S.Sulaiman, B.T.H.T. Baharudin, M.K.A. Ariffin and K. Abdan, “Recent developments of kenaf fibre reinforced thermoset composites: review”, Int. Journal of Materials Research Innovation , Vol.17, Suppl 2, (2013), pp s2-‐1 –s2-‐11.

Materials Research Innovation

2013 Q4

IF=0.398

30 M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Shrinkages and warpage in the processability of wood-‐filled polypropylene composite thin-‐walled parts formed by injection molding”, Materials & Design, 2013.vol 52, pp1018-‐1026.


2013 Q1

IF=3.171

31 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effects of cutting speeds and moisture content on grass chopping (pulverizing)”, Advanced Science letters, Vol 19, No. 9, Sept 2013, pp. 2533-‐2535.


2010 Q2

IF=1.253 2013-‐scopus

32 T.S. Hong, R. Samin, S. Sulaiman and Weria Khaksar, ‘Development of an Educational Robotic Training Kit”, Int. Journal of Advanced Science Letters (2013) 19 (11) pp. 3304-‐3306.


2010 Q2

IF=1.253 2013-‐scopus

33 Taufik Roni Sahroni, Shamsuddin Sulaiman, B. T Hang Tuah Baharudin1, Mohd Khairol Anuar Mohd Ariffin, Hambali Arep@Ariff, “Design and Simulation on Investment Casting Mold for Metal Matrix Composite Material”, Advances in Mechanical Engineering, Volume 2, Number 4, pp 33-‐39, 2012.

Advances in Mechanical Engineering

2012 Q2

IF=0.575

34 Sayuti M., S. Sulaiman, B.T.H.T, Baharudin, M.K.A, Arifin, Vijayaram.T.R, and Suraya S, “Influence of Mechanical Vibration Moulding Process on the Tensile Properties of TiC Reinforced LM6 Alloy Composite


2012 Q2

IF=0.575

/80

Castings”, Advances in Mechanical Engineering, Volume 2, Number 4, pp 13-‐17, 2012 .

35 Muhammad Yusuf, M.K.A. Ariffin, N.Ismail, S. Sulaiman, “Chip formation and surface roughness in dry machining of Aluminium Alloys”, Advanced Science Letters, 2012. Volume 19, Number 8, pp. 2343-‐2346(4).


2010 Q2

IF=1.253 2012-‐scopus

36 Ali Hashemi, Desa Ahmad, Jamarei Othman and Shamsuddin Sulaiman, “ Development and testing of a new tillage apparatus”, Journal of Agricultural Science;, Vol. 4. No. 7; (2012), pp. 103-‐106.

Agricultural Science 2012 Q1

IF=1.157

37 M.K.A Ariffin, S.Sulaiman, Tang S.H., M.Roshdi, S.B. Mohammed, “The effects of different grades of hob cutter in determining gear tooth accuracy”, Advanced Science Letters, 13, 519-‐524, 2012.


2010 Q2

IF=1.253 2012-‐scopus

38 M. Sayuti, S. Sulaiman, T. R. Vijayaram, B. T. H. T. Baharudin, and M. K. A. Arifin, “Manufacturing of TiC Particulate Reinforced Al-‐11.8 Si Matrix Composites by Mechanical Vibration Mould”, Adv. Sci. Lett. 15, 12-‐15, 2012 .


2010 Q2

IF=1.253 2012-‐scopus

39 A. Abdullah, S. Sulaiman, B.T.H.T. Baharudin, M.K.A. Ariffin, T.R.Vijayaram, “Effect of Moisture Content on the Permeability of Tailing Sand Samples Gathered from Ex Tin Mines in Perak State Malaysia”, Advances in Mechanical Engineering, Volume 2, Number 4,pp 18-‐23, 2012.


2012 Q2

IF=0.575

40 Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A., “Effects of Cutting Speeds and Moisture Content on Grass Chopping (Pulverizing)”, Advanced Science Letters, (2012).


2010 Q2

IF=1.253 2012-‐scopus

41 S.Suraya, S.Sulaiman, M.K.A M Arrifin and M.Sayuti, “Computer simulation and experimental investigation of solidification casting process”, Key Engineering Materials, volume 417-‐472, pp 601-‐605, 2011.


2005 Q2

IF=0.224 2011-‐

scopus 42 N.Fatchurrohman, S.Sulaiman, M.K.A M Arrifin, A.A Faieza and B.T.H.T.

Baharudin, “Metal matrix composites: solidification parameters of aluminium-‐11.8% silicon alloy reinforced with titanium carbide particulates”, Key Engineering Materials, volume 417-‐472, pp 1081-‐1084, 2011.


2005 Q2

IF=0.224 2011-‐

scopus

43 Mohd Sayuti, S. Suraya, Shamsuddin Sulaiman, T.R. Vijayaram, Mohd Khairol H. Arifin, B.T. Hang Tuah Baharudin, “Thermal Investigation of Aluminium -‐ 11.8% Silicon(LM6) Reinforced SiO2-‐Particles”, Material Processing Technology II, Vol 264-‐265, pp 620-‐625, 2011. (IF=4.178) Q1

Material Processing Technology

2011 Q1

IF=2.236

44 M.Yusuf, K.Anuar, N.Ismail and S.Sulaiman, “Influence of cutting parameters on surface roughness for wet and dry turning process”, Key Engineering Materials, volume 417-‐472, pp 227-‐232, 2011.


2005 Q2

IF=0.224 2011-‐

scopus 45 M.Sayuti, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, T.R.

Vijayaram and S.Suraya, “Effect of Quartz-‐silicon dioxide particulate on Key Engineering

Materials 2005 Q2

/80

tensile properties of aluminium alloy cast composites”, Key Engineering Materials, volume 417-‐472, pp 727-‐732, 2011.

IF=0.224 2011-‐

scopus 46 M.Sayuti, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, S.Suraya and

E.Gholamreza, “Mechanical vibration technique for enhancing mechanical properties of particulate reinforced aluminium alloy matrix composite”, Key Engineering Materials, volume 417-‐472, pp 721-‐726, 2011.


2005 Q2

IF=0.224 2011-‐

scopus

47 M.K.A M Arrifin, S.Sulaiman, B.T.H.T Baharudin, T.S. Hong and S. Sreenivasan, “Simulation of thermoset injection for bulk mulding compounds (BMC)”, Key Engineering Materials, volume 417-‐472, pp 1101-‐1106, 2011.


2005 Q2

IF=0.224 2011-‐

scopus 48 M.S.Abubakar, D. Ahmad and S.Sulaiman, “Determining the spray

droplet size spectrum from a dual-‐purpose rotary disc chemical applicator”, Int. Journal of Physical Science 2011.

Physical Science 2011 Q2

IF=0.54

49 M.S.Abubakar, D. Ahmad and S.Sulaiman, “Distribution pattern assessment of a dual-‐purpose rotary disc Chemical applicatior”, Transaction of the ASABE 2011.

ASABE 2011 Q2

IF=0.895

50 D.Safarzadeh, S.Sulaiman, F.A.Aziz, D.Ahmad and G.H.Majzoobi, “The design process of a self-‐propelled floor crane”, 2011 Journal of Terramechanics 48 (2), pp.157-‐168.

Terramechanics 2011 Q4

IF=1.417

51 D. Safarzadeh, S.Sulaiman, F.A.Aziz, D.Ahmad and G.H.Majzoobi, “An investigation into the hook dynamics and effect of hook parameters on the sway angles in hydraulic cranes ”, Scientific Research and Essays Vol. 6(6), pp. 1303-‐1316, 18 March, 2011.

Scientific Research and Essays

2011 Q3

IF=0.445

52 Fatai B. AKANDE, Desa AHMAD, Othman JAMAREI, Samsuddin SULAIMAN, l Adepoju B. FASHINA and Hossein SHAMSABADI, “Investigation studies on the effects of tyre inflation pressure on the motion resistance of pneumatic bicycle wheels on hard and deformable surface”, Journal of Agricultural Science, 2011, 7(3), pp317-‐323.

Agricultural Science 2011 Q1

IF=3.812

53 M.Yusuf, K.Anuar, N.Ismail and S.Sulaiman, “ Influence of cutting parameters on surface roughness for wet and dry turning process”, 2011 Key Engineering Materials 471-‐472, pp. 233-‐238.


2005 Q2

IF=0.224 2011-‐

scopus 54 F.B.Akande, D.Ahmad, O.B.Jamarei, S.Sulaiman, and A.B.Fashina, “

Empirical determination of the motion resistance of pneumatic bicycle wheels for on and off-‐road performance”, African Journal of Agricultural Research 5(23), pp. 3322-‐3332.

Agricultural Research

2011 Q3

IF=263

55 A. Azhar, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, and T.R. Vijayaram, “The effect of bentonite clay on green compression strength for tailing sands from old tin mines in Perak state, Malaysia for making green sand casting mould”, Key Engineering Materials, volume 417-‐472, pp 769-‐774, 2011 .


2005 Q2

IF=0.224 2011-‐

scopus

56 M. Vasili, T.S. Hong, N.Ismail and S.Sulaiman,”Bead-‐sort algorithm for load shuffling in miniload ASRS”, Computers and Industrial

Computers and Industrial

2009 Q2

/80

Engineering, CIE 2009 . art. No 5223906, pp 1781-‐1786.

Engineering IF=1.783

57 P. Matoorian, S.Sulaiman and M.M.H.M.Ahmad, “An experimental study for optimization of electrical discharge turning (EDT) process”, Int. Journal of Materials Processing Technology 204 (2008) 350-‐356.


2008 Q2

IF=2.236

58 Elfetori F.Abdewi, Shamsudeen Sulaiman, A.M.S.Hamouda and E.Mehdi,”Quasi-‐static axial and lateral crushing of radial corrugated composite tubes”, Int. Journal of Thin-‐walled Structures, 46 (2008) 320-‐332.

Thin-‐walled Structures

2008 Q2

IF=1.749

59 S.Sulaiman, M.Sayuti and R.Samin,”Mechanical properties of the as-‐cast quartz particulate reinforced LM6 Alloy matrix composite”, Int. Journal of Materials and Processing Technology 201 (2008) 731-‐735.


2008 Q2

IF=2.236

60 S.H.Tang, Y.J.Tan, S.M.Sapuan, S. Sulaiman, N.Ismail and R. Samin, “The use of Taguchi method in the design of plastic injection mould for reducing warpage”, Int. Journal of Materials and Processing Technology , Vol 182 (2007), pp 418-‐426.


2007 Q2

IF=2.236

61 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, ’Bahaviour of axially and laterally crushed corrugated composite tubes’, Int. Journal of Mechanical Engineering Science, JMES435, July 2006.

Mechanical Engineering Science

2006 Q3

IF=0.56

62 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Fabrication of fiber reinforced metal matrix composites by squeeze casting technology”, Int. Journal of Materials and Processing Technology , 178 (2006) 34-‐38.


2006 Q2

IF=2.236

63 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “Effect of geometry on the crushing behaviour of laminated corrugated composite tubes”, Int. Journal of Materials and Processing Technology , 172(2006) 394-‐399.


2006 Q2

IF=2.236

64 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Numerical simulation of casting solidification in permanent metallic moulds”, Int. Journal of Materials and Processing Technology , 178(2006) 29-‐33.


2006 Q2

IF=2.236

65 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Foundry quality control aspects and prospects to reduce scrap rework and rejection in metal casting manufacturing industries”, Int. Journal of Materials and Processing Technology , 178 (2006), pp39-‐43.


2006 Q2

IF=2.236

66 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “Effect of shape and geometry on the energy absorption capability of fiberglass composite tubes”, Int. Journal of Composites Science and Technology, August 2005.

Composites Science and Technology

2005 Q1

IF=3.569

67 C.K.Ooi, M.M.H.M.Ahmad, S.Sulaiman, “Proposing a non-‐traditional ordering methodology in achieving optimal flexibility with minimal inventory risk”, Asia Pacific Journal of Marketing and Logistics, Vol. 17, 1 2005, pp 12-‐18.

Marketing and Logistics

2017 Q4

IF=1.276 2005 scopus

69 S.H.Tang, Y.M.Kong, S.M.Sapuan, R.Samin, S.Sulaiman, “Design and Material Processing 2006

/80

thermal analysis of plastic injection moulding”, Int. Journal of Materials and Processing Technology , 171 (2006) pp259-‐267.

Technology Q2 IF=2.236

69 S.S.S.Imihezri, S.M.Sapuan, S.Sulaiman, M.M.Hamdan, E.S. Zainudin, M.R.Osman and M.Z.A.Rahman, “Mould flow and component design analysis of polymeric based composite automotive clutch pedals”, Int. Journal of Materials and Processing Technology 171 (2006) 358-‐365.


2006 Q2

IF=2.236

70 Y.P.Lim, S. Sulaiman, A.M.Hamouda and M.M.H.M.Ahmad,”Grain refinement of LM6 Al-‐Si alloy sand castings to enhance mechanical properties”, Int. Journal of Materials and Processing Technology,Vol 162-‐163 (2005) pp435-‐441.


2005 Q2

IF=2.236

71 S.S.S. Imihezri, S.M.Sapuan, S.Sulaiman and M.Hamdan, “Simulation of fill time injection moulding process for composite pedals using mould flow analysis software”, Mech. Eng. Journal, Vol. 5 (2005), pp 7-‐10.

Mechanical Engineering

2005 Q4

IF=0.871

72 S.Sulaiman, Y.P.Lim, T.R. Vijayaram, A.M.S. Hamouda and M.M.Hamdan, “An Experimental Investigation on Alumunium-‐Silicon Alloy Sand Castings to Study the Microstructure-‐Property Correlation Influenced by Solidifiation Rate”, Int. Journal of Materials and Processing Technology, MSH1750, 2004,pp1-‐13.


2005 Q2

IF=2.236

73 S.Sulaiman, A.M.S. Hamouda, “Modelling and Experimental Investigation of Solidification Process in Sand Casting”, Int. Journal of Materials and Processing Technology, 155-‐156 (2004), pp1723-‐1726.


2004 Q2

IF=2.236

74 S.S.S.Imihezri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman, “A study on comparison of ‘V’ and ‘X’ ribbing in composite pedal using mold flow analysis software”, Int. Journal of Materials and Design, Elsevier, 2004, pp78-‐84.


2004 Q3

IF=0.636

75 L.H.Boon, K.A.Abbas, S.M.Sapuan, M.M.H.Megat Ahmad, S.Sulaiman,”A Development and Comparative Study of Two Rapid Prototyping Processes of An Automotive Composite Pedal Box System, Int. Journal of Advanced Manufacturing Technology, Vol 5,2003, pp5-‐8.

Advanced Manufacturing Technology

2003 Q3

IF=1.453

76 M.Y.Rosnah, M.M.H.M. Ahmad, S.Sulaiman and Z.Mohamad, “Increasing competitiveness through advanced manufacturing technologies”, Int. J. Manufacturing Technology Management, Vol. 5, No. 4, 2003, pp. 371-‐379.

Manufacturing Technology Management

2017 Q2


77 S.Sulaiman, S.H.Tang and M.S.J. Hashmi, “Rapid Prototyping System by Precision Robotic Manipulator”, Journal of Intelligent Manufacturing, (2003). pp56-‐62.

Intelligent Manufacturing

2003 Q3

IF=1.731

78 E.S. Zainudin, S.M. Sapuan, S.Sulaiman and M.M.H.M.Ahmad, “Comparison of computational and experimental results on the fibre orientation distribution of short fibre reinforced injection moulded thermoplastic composites”, Journal of Plastics Rubber and Composites, (2004), pp68-‐73.

Plastics Rubber and Composites

2004 Q4

IF=0.583

79 S.Sulaiman, A.M.S. Hamouda, “Solidification Analysis of Sand Casting Process”, Journal of Materials and Processing Technology, Casting Technology Special Volume, (2002) pp. 46-‐52.


2002 Q3

IF=1.0

/80

80 E.S. Zainudin, S.M. Sapuan, S.Sulaiman, M.M.H.M.Ahmad and M. Hamedullah, “A comparison of computational simulation and experimental results in short fibre reinforced injection molded polycarbonate composites”, Journal of Materials and Processing Technology (2002) pp125-‐130.


2002 Q3

IF=1.0

81 A.M.S.Hamouda, S.Sulaiman, C.K. Lau “Finite Element Thermal Analysis on the effect of workpiece geometry on the quenching of ST50 steel”, Int. Journal of Material Processing Technology, Vol 119(2001) pp. 354-‐360.


2001 Q3

IF=1.0

82 S.Sulaiman, A.M.S.Hamouda, D.T.Gethin, “An experimental investigation of metal filling system in diecasting process” , Int. Journal of Material and Processing Technology, Vol 119 Issue 1 (Dec 2001) pp 268-‐272.


2001 Q3

IF=1.0

83 S.Sulaiman, A.M.S.Hamouda, “Modelling of the thermal history of sand casting process”, Int. Journal of Material Processing Technology, Vol 113 Issue 1(June 2001) 245-‐250.

Materials Processsing Technology

2000 Q3

IF=0.5

84 M.Jolgaf, A.M.S. Hamouda, S.Sulaiman , M.M.Hamdan, “Development of CAD/CAM system for closed die forging Process”, 2003. Vol 138, Int. Journal of Material Processing Technology, pp436-‐442.


2000 Q3

IF=0.5

85 M.Jolgaf, A.M.S. Hamouda, S.Sulaiman, M.M.Hamdan,”FE analysis of influence of unequal friction, metal filling and residual stresses in closed die forging processes”, Journal of Mechanics and Materials in Design, May 2000, p158.

Mechanics and Materials in Design

2012 Q3


86

A.M.S. Hamouda, S.Sulaiman, M.M.Hamdan,”Coupled thermo-‐mechanical finite element analysis of high speed closed-‐die forging process”, Int. Journal of Mechanics and Materials in Design, May 2000, p201.

Mechanics and Materials in Design

2012 Q3


87 S. Sulaiman, A.M.S.Hamouda, S.Abedin, M.R.Osman, “Simulation of

metal Filling Progress During the Casting Process”, Int. Journal of Material Processing Technology 100 (2000) 224-‐229.


2000 Q3

IF=0.5

88 S. Sulaiman, A.M.S. Hamouda, S. Abedin,” Development of Computer Aided Design System for Casting Process”, Int. Journal of Material Processing Technology, March 1999.


1999 Q3

IF=0.5

89 Shamsuddin Sulaiman, Tham Chee Keen, “Flow analysis along runner and gating system of casting process”, Int. Journal of Materials Processing Technology, Vol 63 Jan 1997, pp.690-‐695.


1997 Q3

IF=0.5

90 A.M.S.Hamouda, S.Sulaiman and M.S.J. Hashmi, “Fast Upsetting of circular cylinders of Aluminium Metal Matrix Composites: Experimental Results and Numerical Analysis”, Journal of Materials Processing Tech. 1996. Vol PRO060/1-‐4, pp.723-‐727.


1996 Q3

IF=0.5

91 S.B. Sulaiman, D.T. Gethin, “A Network Technique for metal flow analysis in the filling system of pressure diecasting and its experimental

Engineering Manufacture

1992 Q2

/80

verification on a cold chamber machine”, Proceedings of the Institution of Mechanical engineers Part B-‐ Journal of engineering manufacture. Vol 206 IMechE 1992, pp 261-‐275.

IF=0.5

b. Citation Index/Refereed Journals

Total = 146 papers After 2007 = 119 papers 2007 and below = 27 papers

No Article Journal Index

1 S. Sulaiman, J. Nemati, G.H. Majzoobi, M. Aljermi, “Experimental and

numerical study of high strain rate property of pure copper processed by ECAE method”, Int. Journal of Advances in Materials and Processing Technologies, Taylor & Francis, 2019, 5(3), pp386-‐393

Advances in Materials and Processing

Technologies

2019 Scopus

2 S.Sulaiman, M, Aljermi, M.I.S. Ismail and M.F.Fadzil, “Thermal-‐Induced Defect and Optimization of Casting Process”, International Journal of Mechanical Engineering and Robotics Research, November 2019, Vol. 8, No. 6, pp 900-‐904.

Mechanical Engineering and

Robotics Research

2019 Scopus

3 Nur Liyana, M.H., Azmah Hanim, M.A., Sulaiman, S., Saliza Azlina, O., “The effect of CNT and Cu on interfacial intermetallic growth of Sn-‐Ag-‐Cu solder”, Materials Science and Engineering, 2019. 469, 012007.

Materials Science and Engineering

2019 Scopus

4 R.E., Ibrahim, R.Rosmamuhamadani, M.K. Talari, Sabrina, M. Yahaya, S.Sulaiman and M.I.S Ismail , “Corrosion Behaviour of Al-‐Si Cast Alloy Reinforced with Titanium diboride (TiB2) and Scandium (Sc)”, Journal of Engineering and science Research 2(2): 01-‐018, 2018.

Engineering and science Research

2018 RMP

5 S.Sulaiman and Z.A. Zulkifli, “Effect of mould vibration on the mechanical properties of aluminium alloy castings”, Advanced Material Processing and Technology, 2018, Taylor & Francis, ISSN:2374-‐068X.


Technologies

2018 Scopus

6 R. Rosmamuhamadani, S.Sulaiman, M.A. Azmah Hanim, MIS. Ismail and M.K.Talari, “Wear characterization of nano-‐hydroxyapatite with addition of titanium (HA-‐Ti)”, Materials and Science Engiineering. 2018. 348 012001.

Materials and Science

Engiineering

2018 Scopus

7 A. Aldeehani, S.Sulaiman, F.A.Aziz, F. Mustapha, “Development of green supply chain management in food industry”, Industrial Engineering and Operation Management, 2018 .

Industrial Engineering and

Operation Management,

2018 Scopus

8 A.A. Khan, M.K.A.M.Ariffin, S.Sulaiman and F. Mustapha, “Factors influencing project selection for SMEs”, International Journal of Recent Technology and Engineering, 2018. 7(4), pp15-‐18

Recent Technology and Engineering

2018 Scopus

9 K.N.M.Tohit, N. Zulkifli, Shamsuddin Sulaiman and B.T. Hang Tuah Baharudin, ‘Identifying Inconel 718 fasteners failure using structured

Materials Science Engineering

2018 Scopus

/80

probem solving method”, Materials Science Engineering, 2018. 370 012017.

10 Q.M. Azpen, B.T.H.T.Baharudin, S. Shamsuddin and F. Musapha, “Reinforcement and hot workability of aluminium alloy 7075 particulate composites: a review”, Journal of Engineering Science and Technology 04/2018; 13(4): 1034-‐1057.

Engineering Science and Technology

2018 EBSCO

11 M.Y. Yuhazri, W.N. Hidayah, S.Sulaiman, H.Sihombing and A,M,Kamarul, “Kansei Engineering approach for Customer Preferences of Car Design”, Advances in Intelligent Systems and Computing, 2018. 739, pp. 289-‐295.

Advances in Intelligent Systems and Computing

2018 Scopus

12 M.A.Omar, B.H. Baharudin and S.Sulaiman, “ Stent Manufacruring using cobalt chromium molybdenum (coCrMo) by selective laser melting technology”, 2017. IOP 1885, 100017

IOP/AIP 2017 Scopus

13 M.A.Ishak, S.Sulaiman, B.T.H.T.Baharudin and Y. Syajaratunnur,”Research on the ship propeller blade to determine changes in the mechanical properties based on forces projection” , ARPN Journal of Engineering and Applied Sciences, Vol 12, No. 4, (2017). pp 1241-‐1247.

Engineering and Applied Sciences

2017 Scopus

14 S. Sulaiman, Z. Marjom, M.I.S.Ismail, M.K.A. Ariffin and N. Ashrafi, “Effect of Modifier on mechanical properties of Aluminium Silicon Carbide (Al-‐SiC) composites”, Elsevier, Procedia Engineering 184 (2017) pp 773-‐777.

Procedia Engineering

2017 Scopus

15 B.G. Jahun, D.Ahmad, M.R.Mahdi and S.Sulaiman, “Development of an experimental rig for soil and crop residues management”, (2017) Acta Horticultiture. 1152, 87-‐94.

Acta Horticultiture 2017 EBSCO

16 S.Sulaiman, Z.Leman, B.T.H.T. Baharudin, M.K.A. Ariffin and Shamsuddin Man, “Process parameter for cylindrical deep drawring components”, Journal of Advances in Materials and Processing Technologies, Taylor & Francis, (2016) Vol 1. NOS. 3-‐4, 542-‐548.


Technologies

2016 Scopus

17 S.Sulaiman, “Material Application, Performace and Life Cycle”, Reference Module in Materials Science and Materials Engineering, Elsevier, (2015), doi:10.1016/B978-‐0-‐12-‐803581-‐8.04102-‐3. Pp1-‐2.

Materials Science and Materials Engineering

2015 Scopus

18 B.G. Jahun, D.Ahmad, M.R.Mahdi and S.Sulaiman, “Design optimization parameters for tractor mounted mulcher blades”, Int. Journal of Applied Engineering Research, 10(23), (2015) pp 43461-‐43464.

Applied Engineering Research

2015 Scopus

19 S.Sreenivasan, S.Sulaiman, B.T.H.T.Baharudin, M.K.A. Ariffin and K.Abdan, “ Mechanical Properties of novel kenaf short fiber reinforced bulk molding compound (BMC)”, Journal of Advances in Materials and Processing Technologies, Taylor & Francis, Vol 1, Issue 1-‐2, 2015, pp49-‐55.


Technologies

2015 Scopus

20 M.S. Al-‐Khaldi, M.K.A. Ariffin, S.Sulaiman, B.T.H. Baharudin and N.A. Aziz, “ Improvement in CAM shaft design: An Experimental application and recommendation”, Applied Mechanics and Materials , Vol. 780-‐790 (2015) pp 249-‐254.

Applied Mechanics and Materials

2015 Scopus

21 N.Fachurrohman, S.Sulaiman, S.M.Sapuan, M.K.A.Ariffin and B.T.H.T.Baharudin, “Analysis of a metal matrix composite automotive

Automotive and Mechanical

2015 Scopus

/80

component”, Int. Journal of Automotive and Mechanical Engineering, (2015), 11 (1), pp. 2531-‐2540.

Engineering

22 Hani Mizhir Magid, S.Sulaiman, M.K.A.Ariffin and B.T.H.T. Baharudin, “Modelling and Simulation of hollow Profile Aluminium Extruded Product”, Applied Mechanics and Materials Vol. 761 (2015) pp 17-‐21.


2015 Scopus

23 Ahmad Aizuddin Abd Aziz, Shamsuddin Sulaiman, Aung Lwin Moe and and Aminudin Abu, “Investigation of Plastic Injection Moulding Process Optimization in Complex shape Product”, Applied Mechanics and Materials Vol. 695 (2015) pp 260-‐264.


2015 Scopus

24 H.M.Magid, S. Sulaiman, M.K.A.Ariffin and B.T.H.T. Baharudin, “Enhancement and improvement of the mechanical properties of aluminium extruded products by mathematical analysis and simulation process”, AIP (2015), 1660, 070113.

AIP 2015 Scopus

25 S.Sulaiman, A. Roshan and S. Borazjani, “Effect of cutting parameter on tool-‐chip interface temperature in an orthogonal turning process”, Applied Mechanics and Materials Vol. 529 (2014) pp 21-‐26.


2014 Scopus

26 S.Sulaiman, S. Borazjani and A. Roshan, “Finite Element Analysis of Aluminium-‐Kevlar/Epoxy Pressure Vessel”, Applied Mechanics and Materials Vol. 529 (2014) pp 27-‐32.


2014 Scopus

27 M.U.Rosli, M.K.A.Ariffin, S.M.Sapuan and S.Sulaiman, “Integrated TRIZ-‐AHP Support System for Conceptual Design”, Applied Mechanics and Materials Vol. 548-‐549 (2014) pp 1998-‐2002.


2014 Scopus

28 H. Md. Akhir, D. Ahmad, I.H. Rukunuddin, S.Sulaiman and A. Yahya, “Design and Development of a Sweet Potato Digging Device’. Pertanika Journal of science and technology, 22 (1)2014:43-‐53

Pertanika Journal of science and technology

2014 Scopus

29 M.D. Azaman, S.M.Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Numerical simulation on moulded thin-‐walled parts via injection moulding process”, Applied Mechanics and Materials Vol. 575 (2014), pp 73-‐77.


2014 Scopus

30 S.H.Tang, Shiva Sadat Moosavipur, S.Sulaiman, M.K.A.M.Ariffin and Morteza Ghobakhloo, “The impact of information technology investment on supply chain capabilities: A review”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp723-‐726. (Indexed by Scopus)


2014 Scopus

31 Hani Mizhir Magid, S. Sulaiman, M.K.A. Ariffin and B.T.H.T. Baharudin, Modeling and Simulation of Forward Al Extrusion Process Using FEM, Applied Mechanics and Materials Vol. 564 (2014) pp 525-‐532.


2014 Scopus

32 Masha Nur Salsabiela Menhat, M.K.A. Ariffin, S.Sulaiman and S.H.Tang, “Managing uncertainty in supply chain management of vessel chatering in Oil and Gas Industry”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp694-‐699.


2014 Scopus

33 J. Nemati, S. Sulaiman, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Development of microstructure and fracture of Al-‐6063 alloy using equal channel angular extrusion”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp488-‐494.


2014 Scopus

/80

34 Muhammad Yusuf, M.K.A.Ariffin, N. Ismail and S.Sulaiman, “Effect of

machining process on surface microhardness of Titanium carbide reinforced aluminium LM6 composite”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp495-‐500.


2014 Scopus

35 Tang S.H., Shiva Sadat Moosavipu, S. Sulaiman, M.K.A.M. Ariffin and Morteza Ghobakhloo, The impact of information technology investment on supply chain capabilities: A review, Applied Mechanics and Materials Vol. 564 (2014) pp 723-‐726.


2014 Scopus

36 J. Nemati, S. Sulaiman, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Microharness characteristics of Al-‐6063 alloy processed by equal channel angular extrusion”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014) pp513-‐518.


2014 Scopus

37 B.T.H.T.Baharudin, K.P.Ng, S.Sulaiman, R.Samin and M.S.Ismail, “Temperature distribution of micro milling process due to uncut chip thickness”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp 214-‐221.


2014 Scopus

38 Mona Kiaee, Shamsuddin Sulaiman and Tang Sai Hong, “Investigation on microstructure and Mechanical Properties of Squeeze Cast Al-‐Si Alloys by Numerical Simulation”, Advanced Materials Research Vol. 1043 (2014) pp 31-‐35.

Advanced Materials Research

2014 Scopus

39 J.Nemati, S.Sulaiman, G.H.Majzoobi and B.T.H.T. Baharudin, “Finite Element Study of Deformation Behaviour of Al-‐6063 Alloy Developed by Equal Channel Angular Extrusion”, Advanced Materials Research Vol. 1043 (2014) pp 119-‐123.


2014 Scopus

40 M.K.A Ariffin, Hazami B. Che Hussain, S.B. Mohammed and S. Sulaiman, Determining Optimum Electro Discharge Machining Parameters for Drilling of a Small Hole by Utilizing Taguchi Method, Applied Mechanics and Materials Vol. 564 (2014) pp 481-‐487. (Indexed by Scopus)


2014 Scopus

41 Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman, Effect of Machining Process on Surface Microhardness of Titanium Carbide Reinforced Aluminium LM6 Composite, Applied Mechanics and Materials Vol. 564 (2014) pp 495-‐500.


2014 Scopus

42 Suraya Sulaiman, Shamsuddin Sulaiman, Munira Ali and Fazilah Abdul Aziz, “Effect of TiC particulate on the microstructure and mechanical properties of Aluminium-‐Based Metal Matrix Composite”, Applied Mechanics and Materials Vol. 529 (2014) pp 145-‐150.


2014 Scopus

43 Masha Nur Salsabiela Menhat, M.K.A. Ariffin, S. Sulaiman and Tang S.H., Managing Uncertainty in Supply Chain Management of Vessel Chartering in Oil & Gas Industry, Applied Mechanics and Materials Vol. 564 (2014) pp 694-‐699.


2014 Scopus

44 Subramaniasarma Sreenivasan, Sameer Adnan Ibraheem, Shamsuddin Sulaiman, B. T. Hang Tuah Baharudin, Mohd K. A. Ariffin and K. Abdan, Evaluation of Combined Treatments Of Natural Fibers: Kenaf, Abaca And Oil Palm Fibers Using Micromechanical and SEM Methods,


2014 Scopus

/80

Advanced Materials Research Vols. 912-‐914 (2014) pp 1932-‐1939.

45 S. Sulaiman, M. K. A. Ariffin and A. Roshan1, Finite Element Modeling of the Effect of Tool Rake Angle on Cutting Force and Tool Temperature during High Speed Machining of AISI 1045 Steel, Advanced Materials Research Vol. 939 (2014) pp 194-‐200.


2014 Scopus

46 Suraya Sulaiman, Shamsuddin Sulaiman, Nur Najmiah Jaafar and Nor Imrah Yusoff, “ Studies on tensile properties of Titanium Carbide (TiC) particulate composite”, Applied Mechanics and Materials Vol. 529 (2014) pp 151-‐156.


2014 Scopus

47 S.Sulaiman, A. Roshan and S. Borazjani, “Effect of cutting parameter on tool-‐chip interface temperature in an orthogonal turning process”, Advanced Meterials Research, Vol. 903 (2014) pp 21-‐26.


2014 Scopus

48 S.Sulaiman, A. Roshan and S. Borazjani, “Finite Element of Aluminiu-‐Kevlar/Epoxy Pressure Vessel”, Advanced Meterials Research, Vol. 903 (2014) pp 27-‐32.


2014 Scopus

49 Suraya Sulaiman, Shamsuddin Sulaiman, Miunira Ali and Fazilah Abdul Aziz, “Effect of TiC particulate on the microstructure and mechanical properties of Aluminium-‐Based Metal Matrix Composite”, Advanced Materials Research Vol. 903 (2014) pp 145-‐150.


2014 Scopus

50 Suraya Sulaiman, Shamsuddin Sulaiman, Nur Najmiah Jaafar and Nor Imrah Yusoff, “ Studies on tensile properties of Titanium Carbide (TiC) particulate composite”, Advanced Materials Research Vol. 903 (2014) pp 151-‐156.


2014 Scopus

51 S.Sulaiman, J. Nemati, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Experimental Study of impact strength of Al-‐6063 alloy Processed by equal channel angular extrusion”, Advanced Materials Research Vol. 911 (2014) pp 158-‐162.


2014 Scopus

52 B.T.H.T. Baharudin, K.P.Ng, S.Sulaiman, R. Samin and M.S.Ismail, “ Temperature distribution of micro milling process due to uncut chop thickness”, Advanced Meterials Research, Vol. 939 (2014) pp 214-‐221.


2014 Scopus

53 Uzair Rosli, M.K.A.Ariffin, S.M.Sapuan and S.Sulaiman, “Problems evaluation for TRIZ methods using AHP: Case study on car’s dashboard improvement design concepts”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp89-‐93.


2014 Scopus

54 C.N.A.Jaafar, I.Zainol, S.Sulaiman and M.I.Ayub, “ Effects of PVA-‐PEG binder system on microstructure and properties of sintered Alumina”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp355-‐360. (Indexed by Scopus)


2014 Scopus

55 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effects of feeding angles and cutting speeds of a mower blade with serrated edges on the pulverization of sweet potato vines”, Advanced Materials Research Vol. 626 (2013), pp260-‐264.


2013 Scopus

56 S. Sulaiman, S. Emamian, M. N. Sheikholeslam, and M. Mehrpouya, "Review of the Effects of Friction Stir Welding Speed on Stainless Steel

Materials, Mechanics and

2013 EBSCO

/80

Type 304L," International Journal of Materials, Mechanics and Manufacturing vol. 1, no. 1, pp. 85-‐87, 2013.

Manufacturing

57 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Pulverization of sweet potato vine at different mover speeds”, IOP Conf. Series: Materials Science and Engineering 50 (2013) 012022.


2013 Scopus

58 S.Sulaiman, A.Roshan and S.Borazjani, “Finite element modeling and simulation of machining of Titanium alloy and H13 Tool Steel using PCBN Tool”, Applied Mechanics and Materials, Vols. 392 (2013) pp 36-‐40.


2013 Scopus

59 S.Sulaiman, A.Roshan and S.Borazjani, “Effect of cutting parameters on cutting temperature of TiAl6V4 Alloy”, Applied Mechanics and Materials, Vols. 392 (2013) pp 68-‐72.


2013 Scopus

60 S.Sulaiman, S.Borazjani, A.Roshan and S. Heydaryan, “Failure analysis of aluminium reinforced composite vessel”, Applied Mechanics and Materials, Vols. 392 (2013) pp 178-‐182.


2013 Scopus

61 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effect of feeding angles and cutting speeds of a mover knife with serrated edges on the pulverization of sweet potato vines”, Advanced Materials Research Vol. 626 (2013) pp 260-‐264.


2013 Scopus

62 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effect of knife shapes and cutting speeds of a mover on the percentage pulverization of sweet potato vine”, Applied Mechanics and Materials, Vols. 421 (2013) pp29-‐33.


2013 Scopus

63 R.S.Taufik and S.Sulaiman, “Thermal expansion model for cast aluminium Silicone carbide”, Procedia Engineering 68 (2013) pp. 392-‐398.


2013 Scopus

64 Jamshid Nemati, S.Sulaiman, Gholam Hossein Majzoobi, B.T.H.T.Baharudin and Azma Hanim Mohamed Ariff, “Effect of equal channel angular extrusion on fatique life of pure Copper”, Advanced Materials Research Vol. 685 (2013) pp 97-‐101.


2013 Scopus

65 S.Sulaiman, S.Borazjani and S.H.Tang, “Finite element analysis of filament-‐wound composite pressure vessel under internal pressure”, IOP Conf. Series: Materials Science and Engineering 50 (2013) 012061.


2013 Scopus

66 S.Sulaiman and N.A. Ismail, “Analysis of failure in manufacturing machinery”, IOP Conf. Series: Materials Science and Engineering 50 (1) (2013) 012057.


2013 Scopus

67 D.Ahmad, O.Jamarei, S.Sulaiman, A.B. Fashina and F.B.Akande, “Modelling of motion resistance ratios of pneumatic and rigid bicycle wheel”, Pertanika Journal of Science & Technology, Vol.21(1) Jan 2013, pp. 59-‐74.


2013 Scopus

69 A.Abdullah, S.Sulaiman, B.T.H.T.Baharudin, M.K.A.Ariffin and T.R.Vijayaram, “Green compression strength of tin mine tailing sand for green sand casting mold”, (2013) Pertanika Journal of Science and Technology 21 (2) pp.335-‐342.


2013 Scopus

/80

69 Shamsuddin Sulaiman, SH Tang, M.K.A.M Ariffin, A Saleh, “Influence of Pattern Coating Thickness on Porosity and Mechanical Properties of Lost Foam Casting of Al-‐Si (LM6) Alloy”, Applied Mechanics and Materials, Vol 300, pp. 1281-‐1284, 2013.


2013 Scopus

70 S Sulaiman, M.K.A.M Ariffin, TS Hong, NA Mustafa, Effect of Boric Acid Mixture as Solid Lubricant towards Machining Processes, Advanced Materials Research, Vol 651, 372-‐377, 2013.


2013 Scopus

71 Nanang Fatchurrohman, Shamsuddin Sulaiman, SM Sapuan, M.K.A Ariffin, BTHT Baharuddin, “Generic Framework for Conceptual Design Using Concurrent Engineering Strategy. A Case Study: Advanced Material Application Product Development of Metal Matrix Composite Component”, Advanced Materials Research, Vol 626, 99-‐108, 2013 .


2013 Scopus

72 N Fatchurrohman, S Sulaiman, SM Sapuan, MKA Ariffin, B Baharuddin, “New Technique for Conceptual Selection of Manufacturing Process and Material, Case Study: Metal Matrix Composite Component”, Advanced Materials Research, Vol 626, 82-‐86, 2013.


2013 Scopus

73 M. U. Rosli, M. K. A. Ariffin, S. M. Sapuan, and S. Sulaiman, “Integrated AHP-‐TRIZ Innovation Method for Automotive Door Panel Design”, International Journal of Engineering and Technology (IJET), Vol 5 No 3, 3158-‐3167, 2013.

Engineering and Technology

2013 Scopus

74 M. U. Rosli, M. K. A. Ariffin, S. M. Sapuan, and S. Sulaiman, "Integrating TRIZ and AHP: A MPV_s Utility Compartment Improvement Design Concepts," International Journal of Materials, Mechanics and Manufacturing, vol. 1, no. 1, pp. 32-‐35, 2013.

Materials, Mechanics and Manufacturing,

2013 EBSCO

75 S. Sulaiman, , Umar Ali Umar, S.H. Tang, N. Fatchurrohman, Application of Radio Frequency Identification (RFID) in Manufacturing in Malaysia, Procedia Engineering, Vol. 50(2012), pp. 697-‐706.


2012 Scopus

76 Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A, “Pulverizing sweet potato vines with different knife angles and different cutting speed”, International Journal of emerging technology and advanced Engineering (2012).

Emerging Technology and

Advanced Engineering

2012 EBSCO

77 N. Fatchurrohman, S.Sulaiman, M.K.A. Ariffin, B.T.H.T.Baharuddin, and A.A.Faieza, “ Solidification characteristic of titanium carbide particulate reinforced aluminium alloy matrix composites”, Journal of Engineering Science and Technology 7(2) 2012, pp248-‐256.

Engineering Science and Technology

2012 Scopus

78 Seyedehfarzaneh Nojabaei, Z. Leman, S.H. Tang and S.Sulaiman, “Development of Priority Oriented Scheduling Method to Increase the Reliability of Manufacturing System”, American Journal of Applied Science 9 (9), 2012, pp1435-‐1442.

Applied Science 2012 Scopus

79 Shahla Seifi, Norzima Zulkifli, Rosnah Yusuff and Shamsuddin Sulaiman, “Information requirements for sustainable consumption”, Social Responsibility Journal, Emerald, Vol. 8 Iss:3 (2012). pp.433-‐411.

Social Responsibility 2012 EBSCO

80 Sayuti, M., Sulaiman, S., Baharudin, B. T. H., M.K.H, Ariffin., Suraya, S., and Vijayaram, T. R, “Effect of Mould Vibration on Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix


2012 Scopus

/80

Composite”, Advanced Material Research, 445, 475-‐480, 2012.

81 N. Fatchurrohman, S. Sulaiman, S.M. Sapuan, M.K.A. Ariffin and B.T.H.T. Baharuddin, “A new concurrent engineering -‐ multi criteria decision making technique for conceptual design selection”, Applied Mechanics and Materials, 225, 293-‐298, 2012.


2012 Scopus

82 Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman, “Optimization of Cutting Parameters on Turning Process Based on Surface Roughness using Response Surface Methodology”, Applied Mechanics and Materials Vols. 117-‐119, pp 1561-‐1565, 2012.


2012 Scopus

83 Mostafa Badakhshian, Shamsuddin B. Sulaiman and Mohd Khairol Anuar B. Mohd Ariffin, “Performance optimization of simultaneous machine and automated guided vehicle scheduling using fuzzy logic controller based genetic algorithm”, International Journal of Physical Sciences Vol. 7(9), pp. 1461 -‐ 1471, 2012.

Physical Sciences 2012 EBSCO

84 Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A, “Pulverizing sweet potato vines with different knife angles and different cutting speed”, International Journal of Emerging Technology and Advanced Engineering (2012).

Emerging Technology and

Advanced Engineering

2012 EBSCO

85 M. Nikbakht, N.Zulkifli, N.Ismail, S.Sulaiman, A.Sadrnia and M.Suleiman, “Multi-‐echelon supply chain design in natural gas Industry”, World Applied Science Journal, 20(1), 2012, pp. 54-‐63.

Applied Science 2012 Scopus

86 S.Sulaiman, M.K.A.M.Ariffin and S.Y.Lai, “Springback behaviour in sheet metal forming for automotive door”, AASRI Procedia 3 (2012) pp.224-‐229.

AASRI Procedia 2012 Scopus

87 S.H.Tang, N.Hakim, W.Khaksar, S.Sulaiman, M.K.A.Ariffin and R.Samin, “Artificial Neural Network (ANN) approach for predicting friction coefficient of roller Burnishing AL6061”, Int. Journal of Machine Learning and Computing, Vol. 2, No. 6, December 2012, pp. 825-‐830.

Machine Learning and Computing

2012 EBSCO

88 T.R.Vijayaram, A.Abdullah and S.Sulaiman, “Determination of green compression strength and permeability of tailing sand for metal casting Industries gathered from ex tin mines in Perak State Malaysia”, Indian Foundry Journal, Vol 58, No.10, October 2012, pp.29-‐33.

Indian Foundry 2012 IFS

89 A Abdullah, Shamsuddin Sulaiman, BT Baharudin, MKA Ariffin, TR Vijayaram, Mohd Sayuti, “Testing for Green Compression Strength and Permeability Properties on the Tailing Sand Samples Gathered from Ex Tin Mines in Perak State, Malaysia”, Advanced Materials Research, Vol 445, pp. 859-‐864, 2012.


2012 Scopus

90 S.Sulaiman, tang S Hong, S. Pawanchi, G.R. Esmaeilian, M.K.A Mohd Ariffin, B.T. Hang Tuah Baharuddin, “Improvement of Tops Spinning Manufacturing with CNC lathe”, Procedia Engineering, Vol 15, pp 3886-‐3890. 2011 .


2011 Scopus

91 S.Sulaiman, M.K.A Mohd Ariffin, G.R. Esmaeilian, , K. Faghihi, B.T. Hang Tuah Baharuddin, “Customer Knowledge Management Application in Malaysian Mobile Service Providers”, Procedia Engineering. Vol 15 (2011) pp 3891-‐3895. 2011 .


2011 Scopus

/80

92 D.Ahmad, S.Shamsuddin, A.B.Fashina and F.B.Akande, “Development of a tractor-‐pulled motion resistance test rig for traction studies on towed narrow wheels”, Int. J Agric & Biol Eng, Vol.4 No. 4 (Dec 2011) pp21-‐27.

Agric & Biol Eng 2011 EBSCO

93 Mohammad Shuaibu Abubakar, Desa Ahamd, Othman Jamarei, Sulaiman Samsuddin and Misron Norhisham, “Evaluation of a dual-‐purpose chemical applicator for paddy field”, American Journal of Applied Sciences 8 (4):362-‐367, 2011.

Applied Sciences 2011 EBSCO

94 Akande, F.B., Ahmad, D., Shamsuddin, S., Jamarei, O.B. and Fashina, A.B. Mathematical modelling of the motion resistance ratio of the pneumatic and rigid bicycle wheels on deformable surfaces. Pertanika Journal of Science and Technology, 2011.


2011 Scopus

95 M.S.Abubakar, D. Ahmad and S.Sulaiman, “Development of a dual-‐purpose chemical applicator for paddy fields”, African Journal of Agricultural Research 2011.

Agricultural Research

2011 Scopus

96 Daryoush Safarzadeh, Shamsuddin Sulaiman, Faieza Abdul Aziz, Desa Ahamd and Gholam Hossein Majzoobi, “An approach to determine effect of crane hook on payload sway”, Int. Journal of Mechanics and Applications 2011: 1(1):30-‐38.

Mechanics and Applications

2011 EBSCO

97 Taufik, S.Sulaiman, T.A.Abdullah adn Sivarao, “Design and Simulation on Compressor Metal Matrix Composite by Investment Casting”, Advanced Materials Research Vols. 264-‐265 (2011) pp 403-‐408.


2011 Scopus

98 T.R. Sahroni, S. Sulaiman, I. Romli, M.R. Salleh and H.A. Ariff, “Nonlinear Thermal Expansion Model for SiC/Al”, World Academy of Science, Engineering and Technology 78 2011.

World Academy of Science,


2011 Scopus

99 Taufik, S.Sulaiman, T.A.Abdullah and Sivarao, “Design and Simulation on Cast Metal Matrix Composite by Investment Casting”, Advanced Materials Research Vols. 264-‐265 (2011) pp 323-‐328.


2011 Scopus

100 F.B. Akande, D. Ahamad, S. Sulaiman, O. Jamarei and A.B. Fashina, “ Present state of research on narrow wheels: A prerequisite for traction studies on non-‐lug narrow wheels”, Leonardo Electronic Journal of Practices and Technologies, Vol 10, Issue 18, January 2011, pp 65-‐78.

Electronic Journal of Practices and Technologies

2011 EBSCO

101 Gholam Reza Esmaeilian, Shamsuddin Sulaiman, Napsiah Ismail, Maryam Hamedi, Megat Mohammad Hamdan Megat Ahmad, “ A tabu search approach for mixed-‐model parallel assembly line balancing problem (type II), Int. Journal of Industrial and Systems Engineering 2011 – Vol 8, No.4 pp407-‐431.

Industrial and Systems

Engineering

2011 EBSCO

102 A. A. Faieza, S. Sulaiman and M.Y. Rosnah,“Product Structure Initialization, the Bottleneck of ERP Implementation in Customer Driven Environments: A Case Study”, Pertanika J. Sci. & Technol. 19 (1): 66 – 82 (2011).


2011 Scopus

103 M.S.Abubakar, D.Ahmad, J.Othman and S.Sulaiman, “Mechanical properties of paddy soil in relation to high clearance vehicle mobility”, Australian Journal of Basic and Applied Sciences, 4(5): 2010, pp906-‐913.

Australian Journal of Basic and

Applied Sciences

2010 Scopus

104 D. Safarzadeh, S.Sulaiman, F.A.Aziz, D.Ahmad and G.H.Majzoobi, Review of Mech. 2010

/80

“Computer-‐Aided FEM to Analyze the Composite Materials for Replacing with Steel in Crane Structure”, Int. Review of Mech. Engineering (IREME), Vol. 4 N.3, March 2010, pp233-‐237.

Engineering (IREME),

Scopus

105 B.T.H.T. Baharudin, S. Sulaiman, M.K.A. Ariffin, A.A. Faieza and S.M. Sapuan, “Coating Performance in High Speed Micro Machining of H13, Tool Steel”, Advanced Materials Research Vols. 83-‐86 pp 985-‐992, 2010.


2010 Scopus

106 N. Fatchurrohman and S. Sulaiman , “ The effect of particulate reinforcement addition to latent heat and solid fraction during solidification of titanium carbide particulates reinforced aluminium alloy matrix composite produced by vortex mixing – sand casting technique”, Int. Review of Mech. Engineering (IREME), Vol. 4 N.1, January 2010, pp12-‐17.

Review of Mech. Engineering (IREME)

2010 Scopus

107 N. Fatchurrohman and S. Sulaiman, “Production and solidification analysis of Titanium carbide particulates reinforced aluminium alloy matrix composite by vortex mixing – sand casting technique”, ICASTOR Journal of Engineering Vol. 3, No. 1 (2010) ,pp 13-‐20.

ICASTOR Journal of Engineering

2010 EBSCO

108 M.S.Abubakar, D.Ahmad, J.Othman and S.Sulaiman, “Present State on Research on Development of a High Clearance vehicle for Paddy Fields”, Research Journal of Agriculture and Biological Sciences, 5(4): 2009, pp489-‐497.

Agriculture and Biological Sciences

2009 EBSCO

109 G.R.Esmaeilian, N.Ismail , S.Sulaiman, , M.M.H.MegatAhmad, & M.Hamedi, “Allocating and balancing of mixed model production through the parallel assembly lines”, 2009, European Journal of Scientific Research 31 (4), pp 616-‐631.

European Journal of Scientific Research

2009 Scopus

110 G.R.Esmaeilian, S.Sulaiman, N.Ismail, M.M.H.MegatAhmad, & M.Hamedi. “Application of MATLAB to Create Initial Solution for Tabu Search in Parallel Assembly Lines Balancing”. Int. Journal of Computer Science and Network Security, 8(10), 132-‐136.

Computer Science and Network

Security

2009 EBSCO

111 Faieza Abdul Aziz, D.T.Pham, Shamsuddin Sulaiman, Napsiah Ismail, Mohd Khairol Anuar Ariffin, and B.T. Hang Tuah Baharudin, “Visual feedback and pseudo-‐haptic feedback improve manual lifting performance”, Journal Teknologi, 49(D) Dec 2008: 157-‐171.

Teknologi 2008 EBSCO

112 Shamsuddin Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F. Abdewi. Effects of Shape and Geometry on the Energy Absorption of Fiberglass Composite Tubes. World Journal of Engineering, 2008, 5(3): 474-‐475.

World Journal of Engineering

2008 EBSCO

113 Napsiah Ismail, S.Sulaiman, Sai Hong Tang and M.R.Vasili, “A statistical travel time model for miniload automated storage and retrieval systems with open-‐rack structure”, In. J. IC-‐AI 2008: 715-‐721.

Artificial Intelligent 2008 Scopus

114 A.A. Faieza, S. Sulaiman, Mohd Khairol Anuar Ariffin, and B.T. Hang Tuah Baharudin, “Virtual training enhances user performance”, ARCS 2008: 189-‐195.

Automation, Robotics And

Control Systems

2008 Scopus

115 M. Jolgaf, S.B. Sulaiman, M.K.A. Ariffin and A.A. Faieza, “Closed Die Forging Geometrical Parameters Optimization for Al-‐MMC”, American

Engineering and Applied Sciences

2008 EBSCO,

/80

J. of Engineering and Applied Sciences, Vol1, pg 1-‐6, 2008

WAD, ASA, DOAJ

116 M Jolgaf, SB Sulaiman, MKA Ariffin, AA Faieza, “Billet shape

optimization for minimum forging load”, European Journal of Scientific Research 24 (3), 420-‐427, impact factor 0.736, 2008.

European Journal of Scientific Research

2008 Scopus

117 Faieza, A.A., Sulaiman, S., N. Ismail, Ariffin, M.K.A, B.T.H.T. Baharuddin, “Visual Feedback and Pseudo-‐Haptic Feedback Improve Manual Lifting Performance” , Jurnal Teknologi, volume 49, pg10.

Teknologi 2008 Scopus

118 S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Effects of shape and geometry on the energy absorbtion of fibreglass composite tubes”, World Journal of Engineering 2008, 5(3): 474-‐475.

World Journal of Engineering

2008 EBSCO

119 G.R.Esmaeilian, M.M.H.Megat Ahmad, N.Ismail, S.Sulaiman and M.Hamedi, “Particular model for improving failure mode and effect analysis (FMEA) by using of overall equipment efficiency (OEE)”, Int. Journal of IEEE 2008, pp1458-‐1466.

IEEE 2008 Scopus

120 S.M.Sapuan, S.S.S.Imihezri, S.Sulaiman, M.Hamdan and E.S.Zainudin, “Comparison of simulated and actual product of polymer composite automotive clutch pedal”, Int. Journal of Mechanical and Materials Engineering (IJMME), Vol 2 (2007) No 1, pp29-‐39.

Mechanical and Materials

Engineering

2007 Scopus

121 A.M.S.Hamouda, S.Sulaiman, T.R.Vijayaram, M.Sayuti and M.H.M.Ahmad, “Procssing and characterisation of particulate reinforced aluminium silicon matrix composite”, Int Journal of Achievements in Materials and Manufacturing Engineering, Vol 25 Issue 2 December 2007, pp. 11-‐16.

Achievements in Materials and Manufacturing Engineering

2007 EBSCO

122 K.N.M.Tohit, S.Sulaiman, N.Ismail, M.Y.Ismail and S.M.Sapuan, “Improvement of accuracy level using process failure mode and effect analysis and control plan techniques for automotive fender shield assembly”, Journal of Scientific and Industrial Research Vol. 66. October 2007, pp. 811-‐818.

Scientific and Industrial Research

2007 Scopus

123 Thoguluva Raghavan Vijayaram, Shamsuddin Sulaiman, Megat Mohamad Hamdan Megat Ahmad and Abdel Magid Salem Hamouda, “Processing, Properties and Metallographic Studies of Combined Tungsten Carbide and Alluminium Silicate Particulates Reinforced Aluminium-‐11.8% Silicon Alloy Matrix Hybrid Composite Castings”, Indian Foundry Journal, Vol. 53 No. 2 February 2007, pp33-‐41.

Indian Foundry 2007 IFS

124 C.F.Tan, N. Ismail, S.V.Wong, S.Sulaiman and M.R.Osman, “Development of hole recognition system from step file”, Asian Journal of Science and Technology for Development AJSTD Vol. 22 Issue 3, 2005, pp. 285-‐295.

Science and Technology for Development

2005 EBSCO

125 H.B. Lee, S.M.Sapuan, S.Sulaiman and M.H.M.Ahmad, “Design process and rapid prototyping of fibre reinforced composite pedal box”, Int. Journal of Sudan Engineering Society, August 2005, Vol 51 no 44, pp23-‐32.

Sudan Engineering Society

2005 EBSCO

126 S.S.S. Imihezri, S.M.Sapuan, S.Sulaiman, M.M.H.M.Ahmad, M.R.Osman and E.S.Zainudin, ‘A simulation work to study the effect of increasing number of gates on air traps and weld line formation in injection moulded composite clutch pedal’, Journal of Applied Technology, vol.2 No. 2 October 2004 , pp 105-‐109.

Applied Technology 2004 EBSCO

/80

127 S.S.S.Imihezri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman, “Design of

Composite Clutch Pedal”, Int. Journal Sudan Engineering Society, Issue 42 Vol 50, July 2004, pp15-‐23.

Sudan Engineering Society

2004 EBSCO

128 S.H.Tang, S.L.Wong, S.Sulaiman, P.Young and M.S.J. Hashmi, “Computer-‐Aided Design in Subtractive and Additive Prototyping”, Pertanika J. Sci. & Technol. Supplement 12(2) 2004 pp127-‐137.


2004 Scopus

129 C.F. Tan, N.Ismail, M.R.Osman, S.V Wong and S.Sulaiman,” The Development of Hole Recognition System for Machined parts”, Pertanika J. Sci. & Technol. Supplement 12(1) 2004 pp1-‐8.


2004 Scopus

130 M.Y.Rosnah, M.M.H.Megat Ahmad, S.Sulaiman and Z.Mohamad, “Implementation of Computer-‐Based Technologies for the Small and Medium Scale Industries of Malaysia”, Pertanika J. Sci. & Technol. Supplement 12(1) 2004 pp41-‐50.


2004 Scopus

131 E.S. Zainudin, S.M. Sapuan, S. Sulaiman and M.M.H.M. Ahmad, “Comparison of computational and experimental results on the fibre orientation distribution of short fibre reinforced injection moulded thermoplastic composites, Ciencia & Tecnologia dos Materiais, 16, no. 4, pp. 57-‐60, 2004. (IF=0.115)

Ciencia & Tecnologia dos

Materiais

2004 EBSCO

132 Tang Sai Hong, Wong Su Luan, Paul Young, Shamsuddin Sulaiman and M.S.J.Hashmi, “Hardware design and interfacing of a robot assisted subtractive prototyping system”, Journal Teknologi, 40(A)Jun 2004: 33-‐50.


133 E.S.Zainudin, S.M.Sapuan, S.Sulaiman and M.M.H.M.Ahmad, “To explore and confirm the validated experimental results in short fibre reinforced injection moulded polycarbonate composite disc using MPI technique”, Int. Journal of Industrial Technology Vol13 No.2,2004, pp57-‐63.

Industrial Technology

2004 EBSCO

134 C.T. Wong, S.Sulaiman, N. Ismail and A.M.S Hamouda, “Design and Simulation of Plastic Injection Moulding Process”, Pertanika J. Sci. & Technol. Supplement 12(2) 2004 pp85-‐99.


2004 Scopus

135 Ishak Aris, A.K.M. Parves Iqbal, A.R.Ramli and S.Shamsuddin, “Design and Development of a programmable painting robot for houses and buildings”, Journal Teknologi, UTM, No. 42(A), Jun 2005, pp27-‐48.


136 N.Ismail, M.R.Osman,C.F.Tan, S.V.Wong and S.Sulaiman, “Extraction of cylindrical features from neutral data format for CAD/CAM integration”, Int. Journal of Engineering and Technology, Vol. 1, no. 2, 2004, pp.206-‐212.


2004 EBSCO

137 Shamsuddin Sulaiman and Lim Ying Pio, “Validation of MAGMAsoft simulation of sand casting process”, Int. Jounal of IEM, Vol. 65 No.1/2, September/December 2004, pp29-‐38.

IEM 2004 EBSCO

138 Wong Choon Tat, Shamsuddin Sulaiman, Napsiah Ismail and A.M.S. Hamouda, “Design and Simulation of Plastic Injection Moulding Process, Int. Journal of Plastic Molding Technology 2003, pp.16-‐20.

Plastic Molding Technology

2003 EBSCO

139 L.H.Boon, K.A.Abbas, S.M.Sapuan, M.M.H.Megat Ahmad, S.Sulaiman and S.I.S.Shahruddin, “A development and comparative study of two rapid

Ciencia & Technologia dos

2003 EBSCO

/80

prototyping processes of an automotive pedal box system”, Int. Journal of Ciencia & Technologia dos Materials, 15, no. 1-‐2, 2003, pp 5-‐8.

Materials

140 E.S. Zainudin, S.M. Sapuan, S.Sulaiman and M.M.H.M.Ahmad, “A numerical investigation of fibre orientation in injection moulded thermoplastic composites” Advances in Material Processing Journal, Institute of Materials Malaysia, ISBN983-‐2781-‐00-‐0, 2003, pp 1-‐33.

Advances in Material Processing

2003 EBSCO

141 E.S. Zainudin, S.M. Sapuan, S.Sulaiman, M.M.H.M.Ahmad “Fiber Orientation of Short Fiber Reinforced Injection Molded Thermoplastic Composites: A Review”, Int. Journal of Plastic Molding Technology, March 2002, Vol 6, No. 1. Pp.1-‐10.

Plastic Molding Technology

2002 Scopus

142 S.B.Sulaiman, D.T.Gethin, “Modelling and experimental investigation of heating and shaking subsystem for an oil analysis facility”, Asean Journal of Science and Technology for Development 14(2)(1997) pp 11-‐26.

Science and Technology for Development

1997 EBSCO

143 Shamsuddin Sulaiman, D.T. Gethin, “A Network Technique For Analysis Of Thermal Transient Casting Process”, Pertanika Journal of Science & Technology Vol.4 No.2 1996 pp.251-‐261.


1996 Pertanika

144 Shamsuddin Sulaiman, D.T.Gethin, “An experimental investigation into the metal filling system of pressure diecasting process”, Journal of Institution of Engineers Malaysia (IEM) March 1996 pp.9-‐13.

IEM 1996 IEM

145 Shamsuddin Sulaiman, D.T. Gethin, “Expert System for the Casting Process Selection and Analysis Procedure”, Institution of Engineers Malaysia (IEM) Bulletin April 1995 pp.11-‐18.

IEM 1995 IEM

146 Shamsuddin Sulaiman, “Casting Thermal Simulation”, Journal Institution of Engineers Malaysia (IEM) June 1994 (54), pp5-‐16.

IEM 1992 IEM

Conference Proceedings

1. S.Sulaiman, A.Aldeehani, M.Alhajji and W.N.W.Ishak, “Optimization of cutting parameters

effecting surface roughness of Al6061 Dry milling machining”, Euro-‐Mediterranean Conference for Environmental Integration, 10-‐13 Oct 2019, Sousse Tunisia.

2. S.Sulaiman and T.Zuhair, “Effect of composite material distribution and shape optimization on energy absorption system”, AMPT 2018, Dublin, Ireland

3. R. Rosmamuhamadani, S.Sulaiman, M.A. Azmah Hanim, MIS. Ismail and M.K.Talari , “Wear Characterization Of Nano-‐Hydroxyapatite With Addition Of Titanium (HA-‐Ti)” , ICMEA Bali, 14-‐16 Jan 2018.

4. A. Aldeehani, S.Sulaiman, F.A.Aziz and F. Mustapha. Development of Green Supply Chain Managementin Food Industry, Proceeding of the Internaltional Conference on Indusrial Engineering and Operation Management, Volume 2018-‐March, 2018, pp 2489-‐2494.

/80

5. S.Sulaiman, A.Aldeehani, F.A.Aziz and F. Mustapha (2018). Integrated Halal Supply Chain in Food Manufacturing Industry. 4th Int. Conference on Electrical, Mechanical and Industrial Engineering 2018, 9-‐11 March 2018 Bandung, Indonesia.

6. H.M.Magid, S. Sulaiman, M.K.A.Ariffin and B.T.H.T. Baharudin , “Improvement the Mechanical Properties of Aluminum Alloys and Composite Extruded Parts”, AMPT 2017, Chennei India

7. A.Aldeehani, S.Sulaiman, A.Aziz and F. Mustapha (2017). Development of Supply Chain Management in Food Industries in Malaysia. Presented in World Congress on Engineering, Science and Technology, 31-‐01 January 2017, Phuket, Thailand.

8. A.Aldeehani, S.Sulaiman, F.A.Aziz and F. Mustapha. Development of Green Supply Chain Managementin Food Industry, Presented in 8th Internaltional Conference on Indusrial Engineering and Operation Management (IEOM), Bandung, Indonesia, March 6-‐8, 2018

9. M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “The optimization on residual Stress analysis for moulded thin-‐walled parts fabraicatied by wood-‐filled polypropylene compostes via plastic injection moulding”, The postgraduateSymposium on Composgte Science and Technology 2014, Putrajaya, pp. 94-‐106.

10. J. Nemati, S.Sulaiman, G.H. Majzoobi, B.T.H.T. Baharudin, & Hanim, M. A. A. (2013). Effect of Equal Channel Angular Extrusion on fatigue life of pure copper. Paper presented at The 3rd International Conference on Advanced Materials Research(ICAMR 2013), Dubai, UAE.

11. N. Kakahy, D.Ahmad, MD. Akhir, S.Sulaiman and IShak.A. “Pulverizationof sweet potato vine at different mower speed”, International Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-‐3 July 2013.

12. J.Nemati, S.Sulaiman, G.H.Majzoobi, B.T.H.T. Baharudin, & Hanim, M. A. A. (2013). Development of Microstructure and Fracture Toughness of AL-‐6063 alloy Using Equal Channel Angular Extrusion Paper presented at the International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E) Kuala Lumpur, Malaysia.

13. J.Nemati, S.Sulaiman, B.T.H.T. Baharudin, G.H.Majzoobi, & M.A.Azmah Hanim. (2014). Finite Element Study of Deformation Behaviour of Al-‐ 6063 Alloy Developed by Equal Channel Angular Extrusion. Paper presented at the International conference on engineering and innovate materials (ICEIM), 2014Kuala Lumpur, Malaysia.

14. S.Sulaiman, J. Nemati, B.T.H.T. Baharudin, G.H.Majzoobi,&Hanim, M. A. A. Experimental study of impact strength of Al-‐6063 alloy processed by Equal Channel Angular Extrusion (ECAE) Paper presented at the International Conference on Key Engineering Materials (ICKEM 2014), Bali, Indonesia.

15. J.Nemati, S.Sulaiman, B.T.H.T. Baharudin, M.A.Azmah Hanim,&G.H.Majzoobi. (2013). Microhardness characteristics of Al-‐6063 alloy processed by Equal Channel Angular Extrusion. Paper presented at the International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E) Kuala Lumpur, Malaysia.

16. S.Sulaiman, A.Roshan and S.Borazjani, “Effect of cutting parameters on Tool-‐Chip interface temperature in an orthogonal turning process”, 1st International Manufacturing Engineering Conference (IMEC2013), Kuantan Pahang Malaysia 1-‐3 July 2013.

17. S.Sulaiman and N. Abidin Ismail, “Analysis of failure in manufacturing machinery”, International Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-‐3 July 2013.

18. S.Sulaiman, A.Roshan and M.K.A. Ariffin, “Finite Element modelling of the effect of tool rake angle on tool temperature and cutting force during high speed machining of AISI4340 Steel”,

/80

Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-‐3 July 2013.

19. S.Sulaiman, S. Borazjani and S.H.Tang, “ Finit e Element anslysis of filament-‐wound composite pressure vessel under internal stress”, Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-‐3 July 2013.

20. Suraya Sulaiman, Shamsuddin Sulaiman, Najmiah Jaafar and Imrah Yusuff, “Studies of tensile propertiesof Titanium Carbide (TiC) Particulate composites”, 1st International Manufacturing Engineering Conference (IMEC2013), Kuantan Pahang 1-‐3 July 2013.

21. N. Fathurrohman, S.Sulaiman, S.M.Sapuan, M.K.A.Ariffin and B.T.H.T.Baharuddin, “New technique for comceptual selection of manufacturing process and material, case study: metal matrix composite component”, Int. Conference of Quality in Research (QIR 2013), Yogyakarta 25-‐28 July 2013.

22. Suraya Sulaiman, Shamsuddin Sulaiman, Munira Ali and Fazilah Aziz, “The effect of TiC particulates on the microstructure and mechanical properties of Aluminium based metal matrix composites”, 1st International Manufacturing Engineering Conference (IMEC2013), Kuantan Pahang Malaysia 1-‐3 July 2013.

23. M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Experimental investigation on surface roughness and tool wear in dry machining of TiC reinforced aluminium LM6 composite”, AMPT2012, 23-‐26 Sept. Wollongong, Australia.

24. M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Chip formation and surface roughness in dry machining of aluminium alloys”, Int. Conference on Mechatronic and applied Mechanics 2011, Guangzhou, 27-‐28th Dec.

25. M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Optimization of cutting parameters on turning process based on surface roughness using response surface methodology”, Int. Conf. on Applied Mechanics 2011, Shenzhen, China 18-‐10th November.

26. Sayuti, M., Sulaiman, S., Vijayaram, T. R Baharudin, B. T. H. T., Ariffin, M. K. A.M. “The Influence of Mechanical Vibration Moulding Process on Thermal Conductivity and Diffusivity of Al-‐TiC Particulate Reinforced Composites.” Paper presented at the International Conference on advanced design and Manufacturing Engineering (ICADME), September 16-‐18, 2011, Guangzhou, China.

27. M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Influence of cutting parameter on surgace roughness for wet and dry turning process”, Int. Conf. on Composite Science and Tech 2011, Kuala Lmpur, Malaysia, 22-‐24th March.

28. M.Sayuti, S.Sulaiman, B.T.H.T.Baharudin, M.K.A.Ariffin, S.Suraya and T.R.Vijayaram, ”Effect of Mould Vibration on Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite”, Int. Conf. on AMPT2011, 13-‐16 July 2011, Istanbul Turkey.

29. Sayuti, M, Sulaiman, S, B.T.H.T. Baharudin, Arifin, M.K.A, Vijayaram, T.R and Suraya, S.. Effect of Quartz-‐Silicon Dioxide Particulate on Tensile Properties of Aluminium Alloy cast Composites. Paper presented at Eighth International Conference On Composite Science And Technology (ICCST 2011), Novotel Hotel Kuala Lumpur, Malaysia, March 22-‐24, 2011.

30. Sayuti, M, Sulaiman,S, B.T.H.T. Baharudin, Arifin, M.K.A, Suraya, S and Gholamreza Esmaeilian. “Mechanical Vibration Technique for Enhancing Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite”. Paper presented at Eighth International Conference On Composite Science And Technology (ICCST8 2011), Novotel Hotel Kuala Lumpur, Malaysia, March 22-‐24, 2011.

/80

31. Suraya. S, Sulaiman. S , Ariffin. M.K.A and Sayuti.M. “Computer Simulation and Experimental

Investigation of Solidification Casting Process”. Paper presented at Eighth International Conference On Composite Science And Technology (ICCST8 2011), Novotel Hotel Kuala Lumpur, Malaysia, March 22-‐24, 2011.

32. Sayuti, M., Sulaiman, S., Baharudin, B. T. H. T., Ariffin, M. K. A. M., Vijayaram, T. R., & Suraya, S. (2011). “Influence of Mechanical Vibration Moulding Process on the Tensile Properties of TiC Reinforced LM6 Alloy Composite Castings”. Paper presented at International Conference on Mechanical Materials and Manufacturing Engineering (ICMMME 2011) in June 20-‐22, 2011, Nanchang, China.

33. Sayuti, M., Sulaiman, S., Vijayaram, T. R Baharudin, B. T. H. T., Ariffin, M. K. A.M. “Manufacturing of TiC Particulate Reinforced Al-‐11.8%Si Matrix Composites by Mechanical Vibration Mould”. Paper Accepted for presented at the 2nd International Symposium on Mechanical Science and Technology (ISMST 2011), December 20-‐21, 2011, Guangzhou, China.

34. A.Hashemi, D.Ahmad, J.Othman and S.Sulaiman, “Design, development and performance of a disk plow combined with rotary blades”, Proceeding of Int. Conf. in Mechanical Engineering Research (ICMER) 2011, 5-‐7 Dec 2011, Kuantan, Pahang Malaysia, pp11-‐18.

35. Amer N.N.Kakahy, D.Ahmad, MD Akhir and S.Shamsuddin “Design, development and performance of an integrated slasher for sweet potato harvester: A review”, Proceeding of Int. Conf. in Mechanical Engineering Research (ICMER) 2011, 5-‐7 Dec 2011, Kuantan, Pahang Malaysia, pp37-‐43.

36. Akande, F.B., Ahmad, D., Jamarei, O.B., Shamsuddin, S. and Fashina, A.B. “Investigative Studies on the effects of tyre Inflation Pressure on the Motion Resistance of Pneumatic Bicycle Wheels on Hard and Deformable Surfaces.” 11th International Congress on Mechanization and Energy in Agriculture Namil Kemal University, Turkey. 2011.

37. M.Sayuti, S.Sulaiman, B.T.H.T.Baharudin, M.K.A.Ariffin, S.Suraya and T.R.Vijayaram, “Mechanical properties of particulate reinforced Alulminium alloy matrix composite”, Int. Conf. on AMPT 2010, Paris 22-‐24 Oct 2010.

38. Sayuti, M., Suraya, S., Sulaiman, S., M.K.H, Ariffin., and Baharudin, B. T. H. “Processing and Characterisation of Particulate Reinforced Aluminium-‐11,8% Silicon Matrix Composite”. Paper presented at Aceh Development International Conference (ADIC2010), Kuala Lumpur, March 26 to 28, 2010.

39. Sayuti, M., Suraya, S., Sulaiman, S., Vijayaram, T. R., M.K.H, Ariffin., and Baharudin, B. T. H. T. “Thermal Investigation of Aluminium -‐ 11.8% Silicon (LM6) Reinforced SiO2-‐Particles”. Paper presented at the International Conference on Advanced in Materials and Processing Technologies (AMPT2009), The Legend Hotel, Kuala Lumpur Malaysia, 26-‐29 October 2009.

40. N.Fatchurrohman, S.Sulaiman, M.K.A ariffin and A.A Faieza, “Solidification properties of metal matrix composites: Aluminium alloy reinforced with titanium carbide particules fabricated by sand casting method”, WEC 2010, 2-‐5 August 2010, Kuching Sarawak.

41. N.Fatchurrohman, S.Sulaiman, M.K.A ariffin and A.A Faieza, “Solidification properties of metal matrix composites: Latent heat and solid fraction aspects”, WEC 2010, 2-‐5 August 2010, Kuching Sarawak.

42.

Sayuti. M, S. Sulaiman, Vijayaram T. R., B.T.H.T Baharudin, Ariffin M.K.A and Suraya S., “Manufacturing and mechanical properties of titanium carbide particulate reinforced aluminium – 11.8% silicon alloy matrix composite castings”, WEC2010, 2-‐5 August 2010,

/80

Kuching Sarawak.

43. Suraya S, M. Sayuti M, Sulaiman S, and Ariffin. M.K.A. “Tensile properties of titanium carbide particulates composites” , ENCON 2010 14-‐15 April 2010, Kuching Serawak.

44. Sayuti, M., Suraya, S., Sulaiman, S., Vijayaram, T. R., M.K.H, Ariffin., and Baharudin, B. T. H. T. “Thermal Investigation of Aluminium -‐ 11.8% Silicon (LM6) Reinforced SiO2-‐Particles”. Paper presented at the International Conference on Advanced in Materials and Processing Technologies (AMPT2009), The Legend Hotel, Kuala Lumpur Malaysia, 26-‐29 October 2009.

45. Sayuti, M., Sulaiman, S., Vijayaram, T. R., Baharudin, B. T. H. T., Ariffin, M. K. H., and Suraya, S. “Manufacturing and Mechanical Properties of Titanium Carbide Particulate Reinforced Aluminium-‐11.8% Silicon Alloy Matrix Composite Castings”. Paper presented at the World engineering Congress 2010, 2010, Kuching, Sarawak Malaysia, 2-‐5 August 2010.

46. Suraya, S., Sulaiman, S., Sayuti, M., Ariffin, M. K. H., and Baharudin, B. T. H. T. The Effect of TiC Microstructure and Tensile Properties of Aluminium-‐11.8% Silicon Alloy. Paper presented at the World Engineering Congress 2010, Kucing, Sarawak, 2-‐5 August 2010.

47. M.S.Abubakar, D.Ahmad, S.Shamsuddin and M.Norhisham, “Conceptual design of a remote-‐controlled chemical applicator for flooded paddy fields”, Int. Conf on Sustainable Mobility (ICSM) 2010, 1-‐3 December, Kuala Lumpur.

48. M.S.Abubakar, D.Ahmad, O.Jamarei, S.Samsuddin and M.Norhisham,”Evaluation of a dual-‐purpose chemical applicator for paddy fields”, Int. Conference on Mechatronics (ICOM) 2011, 17-‐19 May, 2011 Kuala Lumpur.

49. Akande, F.B., Ahmad, D., Jamarei, O.B, S. Shamsuddin, S., and Fashina, A.B. (2009). Development of a rolling resistance test rig. Poster presented at the National Conference on Agriculture and food Mechanisation, Renaissance Hotel Melaka, Malaysia. 23-‐25 June, 2009. Pp 109-‐112.

50. A.Azhar and S.Shamsuddin, “Preliminary study on tailing sand from ex-‐tin mine sites in Peninsular Malaysia for use as foundry sand: grain size distribution and average grain size”, Int. Conf. On AMPT 2009, Kuala Lumpur, 26-‐29th October 2009.

51. M.Sayuti, Suraya S, S. Sulaiman, T.R Vijayaran, M.K.H. Ariffin and B.T.H.T Baharudin, “Thermal investigation of Aluminium – 11.8% silicon (LM6) Reinforced Sio2-‐Particles”’ AMPT 2009, 26th -‐ 29th October, 2009, Gombak, Selangor, Malaysia.

52. N. Fatchurrohman, S.Sulaiman, M.K.A Ariffin and A.A. Faieza, “The effect of particulate reinforcement addition to latent heat and solid fraction during solidification of titanium carbide particulates reinforced aluminium alloy matrix composite produced by sand casting”, ATCI, 3-‐5 November 2009, PWTC Kuala Lumpur.

53. S.Suraya, S. Sulaiman, S.H. Sheikh Md. Fadzullah, M.sayuti and M.K.A Ariffin, “Mechanical anisotropy ptimiza of fused deposition modeling”’ NSPM 2009, 14-‐16 December 2009, Bangi Selangor.

54. Akande, F.B., Ahmad, D., Hadi, S. Samsuddin, S., and Fashina, A.B. (2008): “Status of research on narrow wheels. Paper presented at the 25th anniversary of the Confederation of the Scientific and Technological Associations in Malaysia (COSTAM)”, Malaysian Science and Technology Conference, KLCC, Malaysia. MSTC 2008.

55. S.Sulaiman, M.K.A.Ariffin, A.A.Faieza, B.T.Tuah and N.Fachurrohman, “Optimisation and thermal analysis of casting design”, Int. Conf. On AMPT 2008, Manama Bahrain, 2-‐5 November 2008, pp139.

/80

56. B.T.H.T.Baharudin, S.Sulaiman, M.K.A.Ariffin, A.A.Faieza, and S.M.Sapuan, “Coating

performance in high speed micro machining of H13 tool steel”, Int. Conf. On AMPT 2008, Manama Bahrain, 2-‐5 November 2008, pp274.

57. M. Vasili, T.S. Hong, N.Ismail and S.Sulaiman, “A statistical travel time model for miniload automated storage and retrieval system with open-‐rack structure”, Proceedings of 2008 Int. Con. On Artificial Intelligence ICAI 2008 and Proceedings of the 2008 Int. Con. On Machine Learning: Models, Technologies and Application, pp 715-‐721.

58. M.K.A.Ariffin, A.A.Faieza, N.Ismail, B.T.H.T.Baharudin and S.Sulaiman, “Integration of finite element analysis and MATLAB for genetic algorithm optimisation”, Int. Conf. On AMPT 2008, Manama Bahrain, 2-‐5 November 2008, pp199.

59. Gholamreza Esmaeilian, M.M.H.Megat Ahmad, N.Ismail, S.Sulaiman and M.Hamedi, “Particular model for improving failure mode and effect analysis (FMEA) by using overall equipment afficeincy (OEE)”, Proceedings – International Symposium on Infromation Technology 2008, ITSim 4, art. No. 4631974.

60. Gholamreza Esmaeilian, M.M.H.Megat Ahmad, N.Ismail, S.Sulaiman and M.Hamedi, “Heuristic model for improving failure mode and effect analysis (FMEA) by using of overall equipment efficiency (OEE)”, 3rd International Symposium on Information Technology Kuala Lumpur 26-‐29 August 2008.

61. Shahraki, M. R., Ahmad, M. M. H. b. M., N.Ismail, S.Sulaiman, & Esmaeilian, G. R. (2008). “Optimal Lot Size of EPQ Model Considering Imperfect and Defective Products”. International Conference on Mechanical & Manufacturing Engineering (ICME2008).

62. S.Sulaiman, Elfetori F. Abdewi, M.K.A.Ariffin and N.Fatchurrohman, “Crushing behaviour of cylindrical and radial corrugated composite tubes”, Proceeding of iC2MS, Melaka, 5-‐7 August 2008.

63. S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Effects of shape and geometry on the energy absorbtion of fibreglass composite tubes”, Proceeding of int. Conference ICCE-‐16, Kunming China 21-‐25 July 2008,pp663-‐664.

64. A.A. Faieza, S. Sulaiman, M.K.A. Ariffin, B.T.H.T. Baharuddin, “Virtual Training Enhances User Performance” ARCS 2008, 7-‐10 July 2008, Orlando, FL, USA.

65. Ariffin, M. K. A.; Badakhshian, M.; Sulaiman, S. B.; Faeiza, A. A. , “Automated Guided Vehicles Scheduling Optimization by Fuzzy Genetic Algorithm” The 12th World Multi-‐Conference on Systemics, Cybernetics and Informatics: WMSCI, 29 jun – 2 july 2008, Orlando, Florida, USA.

66. B.T.H.T. Baharudin, S. Sulaiman, M.K.A. Ariffin and A.A. Faieza, “Coating Performance in High Speed Machining”, AMPT 2008, 2 -‐5 November 2008 Manama, Bahrain.

67. M.Badakhshian, S. B. Sulaiman, M. K. A. Ariffin, “Performance Optimization of Automated Guided Vehicles using Fuzzy Genetic Algorithm”’ International Conference on Mechanical and Manufacturing Engineering, ICME 2008, 21-‐23 May 2008, Johor Bahru Malaysia.

68. M.K.A.Ariffin, A.A.Faieza N.Ismail, B.T.H.T Baharudin and S. Sulaiman. “Intergration of finite element analysis and matlab for genetic alagorithm optimization”, AMPT 2008, 2 -‐5 November 2008, Manama Bahrain.

69. Mostafa badakshian, shamsuddin sulaiman, Mohd khairol anuar mohd Ariffin, “Fuzzy genetic algorithm model for optimization of automated guided vehicle scheduling”, 38th Conference on Computer and Industrial Engineering (CIE38), 31 October – 2 November 2008,

/80

Beijing, China.

70. S. Sulaiman, Elfetori F. Abdewi, M.K.A.Ariffin and A.A.Faieza, “Effects of shape and geometry on the energy absorption of fiberglass composite tubes”, International Community for Composites Engineering (ICCE) 16, 20-‐26 July 2008, Kunming China.

71. S.Sulaiman, M.Sayuti and R.Samin “Mechanical properties of the as-‐cast quartz particulate reinforced LM6 alloy matrix composites”, Proceeding of 10th Int. Conf. on Advances in Materials and Processing Technologies AMPT, Korea, 8th – 11th October 2007, pp1733-‐1742.

72. Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Assembly Line and Balancing Assembly Line and Effect in Supply Chain Management. International Conference In Supply Chain Management, 118-‐127.

73. Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Using Human-‐oriented and Process-‐oriented Strategy for improving implementation of TPM in Food Industries. 4th International Conference In Maintenance Management, Iran.

74. S.Sulaiman, elfetori abdewi, M.K.A. Ariffin and N. Fatchurrohman, “Crushing behaviour of cylindarical and radial corrugated composite tubes”, IC2MS, 5-‐7 august 2008, Melaka Malaysia.

75. S.Sulaiman, M.K.A Ariffin, A.A. Faieza and Elfetori F. Abdewi, “Effects of shape and geometry of on the energy absorption of fiberglasss composite tubes” ICCE-‐16, 20-‐26 July 2008 Kunming China.

76. S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Manufacturing of Radial Corrugated Composite Tubes for Crushing Behaviour and Energy Absorption”, AMPT 2008, 2-‐5 November 2008, Manama, Bahrain.

77. S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Optimisation of Die Casting Design”, AMPT 2008, 2 -‐5 November 2008. Manama, Bahrain.

78. S.Sulaiman, T.R.Vijayaram and R.Samin, “Squeeze casting technique for processing light metals, alloys and metal matrix composites”, Proceeding WEC 2007, 5-‐9 August 2007, Penang.

79. Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2008b, 21st – 23rd May, 2008). “Heuristic Model for Improving Risk Priority Number by using Overall Equipment Efficiency International Conference on Mechanical and Manufacturing Engineering” 2008 (ICME2008) Johor Bahru, Johor, Malaysia.

80. Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2008a). Development of traditional assembly line balancing by using new model assembly line balancing. International Conference on Plant Equipment and Reliability -‐ ICPER 2008.

81. Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Development of traditional assembly line balancing using new model assembly line balancing. International Conference on Applications and Design in Mechanical Engineering.

82. S.Sulaiman, Y.P.Lim and M.M.H.M.Ahmad, “Combination effect of grain refiner and modifier on the metallurgical properties of LM6 Al.Si sand casting” Proceeding WEC 2007, 5-‐9 August 2007, Penang.

83. Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Assembly Line and Balancing Assembly Line. National Intelligent System and Information Technology Symposium (UPM), 07(2nd), 232-‐240.

/80

84. Gholam Reza esmaeilian, M.M.H.M.Ahamd and S.Sulaiman, “ Assembly line and balancing assembly line”, Proceeding WEC 2007, 5-‐9 August 2007, Penang.

85. P. Matooriam, S.Sulaiman and MMH. Megat Ahmad, “Using Taguchi quality engineering method to optimize electrical discharge turning”, Proceeding of Conference on applications and design in Mechanical Engineering, 25-‐26 October 2007 Kangar Perlis, Malaysia, pp472-‐476.

86. G.R.Esmaeilian, R.Samin, M.M.H.Megat Ahmad, S.Sulaiman and N.Ismail, “Development of traditional assembly line balancing using new model assembly line balancing”, Proceeding of Conference on applications and design in Mechanical Engineering, 25-‐26 October 2007 Kangar Perlis, Malaysia, pp13-‐17.

87. E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, ’Lateral collapse of composite radial corrugated tubes’, International Conference on Composite Materials and Nano-‐Structures, iC2MS’06, 25-‐29 April 2006, Shah Alam Selangor Malaysia.

88. T.R.Vijayarm, S.Sulaiman, A.M.S.Hamouda and M.M.Megat Ahmad, ‘Composite materials characterization using SEM: Current status and future trends’, 13th Int. Scientific Conference of Electron Microcopy, Penang Malaysia, 21-‐25 Sept 2006.

89. E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “An experimental investigation into crushing behaviour of radial corrugated composite tube”, Third Internation Conference on Structural Stability and Dynamics, ICSSD, 19th-‐22nd June 2005, Florida, USA.

90. E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “An experimental investigation of the effect of specimen shape and geometry on the energy absorption of fiber glass composite tubes”, Internation Advanced Technology Congress, IATC 2005 6-‐8 December 2005, Putrajaya Malaysia, pp238-‐245.

91. L. Ying Pio, S. Sulaiman, A.M.Hamouda and M.M.M.Ahmad, “Grain refinement of LM6-‐Si alloy sand casting to enhancement mechanical properties”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-‐19th May 2005, Poland, pp.625-‐629.

92. E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “Effect of geometry on the crushing behaviour of laminated corrugated composite tubes”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-‐19th May 2005, Poland, pp.1-‐4.

93. T.R.Vijayaram, S.Sulaiman, A.M.Hamouda and M.H.M.Ahmad, “Quality control aspects and prospects to reduce rework and rejection in metallurgical industries”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-‐19th May 2005, Poland, pp.567-‐570.

94. T.R.Vijayaram, S.Sulaiman, A.M.Hamouda and M.H.M.Ahmad, “Computer simulation of solidification of castings processed in metallurgical engineering foundries”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-‐19th May 2005, Poland, pp571-‐577.

95. Lim Ying Pio, Shamsuddin Sulaiman, “The simulation of sand castings process with MAGMASOFT”, Proceeding of the 2nd INTERNATIONAL Conference on Mechatronics, ICOM’05, 10-‐12 May 2005, Kuala Lumpur, Malaysia, pp789-‐796.

96. Thoguluva Raghavan Vijayaram, Mohamad Sayuti, Shamsuddin Sulaiman and Abdel Magid Salem Hamouda, “Quantification of mechanical properties and characterisation of fracture surfaces on the ascast quartz particulate reinforced aluminium-‐ 11% silicon alloy matrix composites”, Abstract published in ICCE12 Spain International Conference Proceedings, 2005.

97. N.Ismail, M.R.Osman, C.F.Tan, S.V.Wong, S.Sulaiman, “Extraction of cylindrical features from

/80

neutral data format for CAD/CAM integration”, Proceeding of Int. Eng. Convention 2004, 22-‐25 August 2004, Amman Jordan.

98. R. Samin, N.Ismail, S.Sulaiman, R.Ali, M.M.Hassan, “Robot Industry trajectory planning using MSC Visual Nastran”, Proceedings of the 19th International Conference on CAD/CAM, Robotics and Factories of the future (CARS & FOF 2003) 22-‐24 July 2003 Kuala Lumpur, pp. 911-‐918.

99. Suditama Sulaiman, M.M.H.Megat Ahmad, S.Sulaiman, N.Adam,”Experiment Analysis of Thermal Storage Material and Heat Transfer Characteristic pipes arrage heated immerse in the material Thermal Storage”, 3rd Int. Conf. On Advances in Strategic Technologies (ICAST 2003) 12-‐14th August 2003, Kuala Lumpur. Pp1045-‐1048.

100. S.Sulaiman, A.M.S. Hamouda and M.K.A.Ariffin, “Design and Fabrication of Plastic Injection Mould”, Proceeding of AMPT2003, 8-‐11 July 2003, Dublin Ireland, pp1603-‐1605.

101. S.Sulaiman, A.M.S. Hamouda, “Modelling and Experimental Investigation of Solidification Process in Sand Casting”, Proceeding of AMPT2003, 8-‐11 July 2003, Dublin Ireland, pp531-‐534.

102. Shamsuddin Sulaiman, “Numerical Analysis of Solidification in Casting Process”, Proceeding of The 3rd Int. Conf. On Numerical Analysis in Engineering, 13-‐15 March 2003, Batam Indonesia, pp2.7-‐2.10.

103. Shamsuddin Sulaiman, “An Application of Network Method in Thermal Transient Casting Process”, Proceeding of The 3rd Int. Conf. On Numerical Analysis in Engineering, 13-‐15 March 2003, Batam Indonesia, pp2.11-‐2.19.

104. S.Sulaiman, A.M.S Hamouda and M.K.A Ariffin, “Design and fabrication of plastic injection mould”, AMPT 2003, 8-‐11 July 2003, Dublin Ireland.

105. M.K.A Ariffin, S. Sulaiman, M.M.Hamdan, Z.Leman, N Ismail, “Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen”, World Engineering Congress 2002, 22-‐25 July 2002, Sarawak Malaysia.

106. M.K.A Mohd Ariffin, S. Sulaiman, M.M. H.Megat Ahmad, “Plastic Flow Simulation of Plastic Injection Moluding Process”, The International Conference on Mechatronics, 12-‐13 February 2001, Kuala Lumpur.

107. Razali Samin, Napsiah Ismail Ismail, Shamsuddin Sulaiman, Roslizah Ali, Md. Mahmud Hasan, “Robot Manipulation Trajectory Planning for Complex Positions”, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp425-‐430.

108. Tang S.H., S.Sulaiman, Chia A.P. “Industrial Robot Selection System – A Preliminary Study”, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp416-‐418.

109. Rosnah Mohd Yusuff, M.M.H.Ahmad, S.Sulaiman, Z.Mohamad, “Implementation of Computer-‐Based Technologies for the Small and Medium Scales Industries of Malaysia”, Proceding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp102-‐105.

110. Tan Chee Fai, Napsiah Ismail, Mohd Rasid Osman, Wong Shaw Voon, Shamsuddin Sulaiman, “The Development of Hole Recognition System for Machined Part”, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp19-‐22.

111. Tang S.H., Sulaiman.S., Hashmi M.S.J, “Computer-‐Aided Design in Subtractive and Additive Prototyping”, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp342-‐346.

/80

112. Wong Choon Tat, Shamsuddin Sulaiman, Napsiah Ismail, A.M.S. Hamouda “ Design and

Simulation of Plastic Injection Moulding Process”, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp193-‐198.

113. M.K.A.Ariffin, S. Sulaiman, M.M.Hamdan, Z.Leman and N.Ismail “Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen”, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp329-‐332.

114. S. Sulaiman, Y.B .Leong, “Development of Thermal Analysis Software of Casting Process, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp189-‐192.

115. S.Sulaiman, “Modelling of Thermal History of Sand Casting Process”, Int. Conf. Of AMPT01, 19-‐21 Sept 2001, Madrid Spain.

116. S.Sulaiman, “An experimental investigation of temperature history of sand casting process”, Int. Conf. Of AMPT01, 19-‐21 Sept 2001, Madrid Spain

117. Tan Chee Fai, Napsiah Ismail, Mohd Rasid Osman, Wong Shaw Voon, Shamsuddin Sulaiman, “The implemention of feature recognition system for CAD/CAM Integration”, SCORED 2001 UTM.

118. Shamsuddin Sulaiman, “Simulation and verification of thermal transient of sand casting process”, International Conf. On Mechatronic 2001, 13-‐14 Feb 2001 Kuala Lumpur.

119. M.K.A.Mohd Ariffin, S.Sulaiman, M.M.H.M.Ahmad, ”Plastic Flow Simulation of plastic injection Moulding Process”, International Conf. On Mechatronic 2001, 13-‐14 Feb 2001 Kuala Lumpur.

120. Tang, S.H, Sulaiman,S. Hashmi, M.S.J. “Precision Robotic Manipulator based Rapid Prototyping System”, Proceeding of the IASTED Int. Conf. Robotics and Automation 2000, August 14-‐16, 2000, Honolulu, Hawai USA.

121. S.Sulaiman. A.M.S.Hamouda, ”Modelling of thermal history of sand casting process”, 5th Asia Pacific Conference on Material Processing 25-‐27 June 2001 Seoul, Korea.

122. S.Sulaiman, A.K.H.Lim, C.L.Tan “An experimental investigation of temperature history of sand casting process”, Proceeding of ICAMT2000 UTM, pp299-‐304.

123. S.Sulaiman, A.K.H.Lim, “Modelling of Thermal Analysis of Sand Casting Process”, Proceeding of ICAMT2000 UTM, pp595-‐600.

124. S.Sulaiman, A.M.S.Hamouda, “An experimental investigation of temperature history of sand casting process”, Int. Conference on Advances in Strategic Technologies-‐ 2000 UKM Kuala Lumpur 15-‐17 August 2000.

125. M.A. Abdulmawlla Jolgaf, A. M. S. Hamouda, S. Sulaiman and M. M. Hamdan: Finite Element Simulation And Optimization Of Plan Strain Closed Die Forging Process, International Conference On Advances In Strategic Technology, ICAST 2000, 15-‐17 August 2000, Malaysia.

126. M.A. Abdulmawlla Jolgaf, A. M. S. Hamouda, S. Sulaiman and M. M. Hamdan: on the influence of unequal friction into load, metal filling and residual stresses in closed die forging process: finite element approach, 3rd international conference on mechanics and material in design, 29-‐31 may 2000, Orlando, USA.

127. M. A. Abdulmawlla Jolgaf, A. M. S. Hamouda, S. Sulaiman and M. M. Hamdan: Development of CAD/CAM System for Closed-‐Die Forging Process, International Manufacturing Conference in

/80

China, (Hong Kong, 16-‐17 August 2000).

128. C.K.Ooi, M.M.H. Megat Ahmad, M.R.Osman, M.Y.Rosnah, S.Sulaiman, M.Y.Ismail, “The Effectiveness of Managing Long Lead-‐Time Parts by Family Ordering”, Proceeding of World Engineering Congress 19-‐22nd July 1999, Kuala Lumpur, pp459-‐464.

129. M.A.Hossain Mollah, S.M.Sapuan, S.Sulaiman,”Design Aspects of A Composite Material Country Boat”, Proceeding of World Engineering Congress 19-‐22nd July 1999, Kuala Lumpur, pp429-‐434.

130. S.Sulaiman, M.R.Osman, Y.K.Chin,”Design and Development of an Automated Orientation Detection System with Robot Arm and PLC Integration”, Proceeding of World Engineering Congress 19-‐22nd July 1999, Kuala Lumpur, pp363-‐367.

131. Y.C.Low, M.R. Osman, S.Sulaiman, N.Ismail, “ Investigation Of The Need For Local Plastic Injection Moulding (PIM) Robot”, ”, Proceeding of World Engineering Congress 19-‐22nd July 1999, Kuala Lumpur, pp357-‐361.

132. S.Sulaiman, A.M.S.Hamouda, D.T.Gethin, “An experimental analysis of metal filling in diecasting process”, Proceeding AMPT ’99, 3rd – 6th August ’99, Dublin, Ireland.

133. S.Sulaiman, W.K.Binienda, Y.Wang, “Internal Pressure Effect on Residual Stresses for Filament Wound Composite Tubes”, Proceeding of World Engineering Congress 19-‐22nd July 1999, Kuala Lumpur., pp51-‐55.

134. S. Sulaiman, A.M.S.Hamouda, S.Abedin, “Simulation of Metal Filling Progress During Casting Process”, 4th Asia Pacific Conference on Material Processing, Singapore, 19-‐21 May 1999.

135. Elfetori F. Abdewi, S.Sulaiman, A.M.S.Hamouda, “Computational Study on the Effect of Thermal Stresses on Die Casting Design”, Proceeding of World Engineering Congress 19-‐22nd July 1999, Kuala Lumpur, pp337-‐343.

136. A.M.S.Hamouda, S.Sulaiman, , C.K.Lau, “Finite Element analysis on the effect of workpiece geometry on the quencing of ST50”, Proceeding Int. Conf. Of Advances in Materials and Processing Technology (AMPT99), 3rd – 6th August ’99, Dublin, Ireland..

137. S. Sulaiman, A.M.S.Hamouda, S.Abedin, “Simulation of Metal Filling Progress During Casting Process”, 4th Asia Pacific Conference on Material Processing, Singapore, 19-‐21 May 1999.

138. A.M.S.Hamouda, S.Sulaiman, , C.K.Lau, “Finite Element analysis on the effect of workpiece geometry on the quencing of ST50”, Proceeding Int. Conf. Of Advances in Materials and Processing Technology (AMPT99), 3rd – 6th August ’99, Dublin, Ireland.

139. F.Hassan, S.Sulaiman, A.M.S.Hamouda, “Casting materials: Recent advances and application “, Int. Conf. Of Advances in Materials and Processing Technology (AMPT98), 24-‐29 August 1998, Kuala Lumpur, pp134-‐144.

140. Elfetori F. Abdewi, S.Sulaiman, A.M.S. Hamouda, Megat M.Hamdan,”Finite Element Analysis and Optimization of Die Casting Design”, Int. Conf. of Advances in Materials and Processing Technology (AMPT98), 24-‐29 August 1998, Kuala Lumpur,pp1006-‐1016.

141. S. Sulaiman, A.M.S. Hamouda, S.Abedin, “Three-‐Dimensional Finite Element Thermal Analysis of Die/Mould for Casting Industry Applications”, Int. Conf. of Advances in Materials and Processing Technology (AMPT98), 24-‐29 August 1998, Kuala Lumpur, pp1017-‐1028.

142. S. Sulaiman, A.M.S.Hamouda and S.Abedin, “Development of Computer Aided Design (CAD) system for casting process”, Proc. of Int. Conf. on Advences in Materials and Processing

/80

Technologies, AMPT-‐97, Portugal, June 1997.

143. M.D.Huda, R.Puyani, S.Sulaiman and M.S.J.Hashmi, “Development of a mathematical model for zinc oxide varistor for low weight loss and shrinkage rate”, Proceeding of Int. Conf. on Advances in Materials and Processing Technologies, AMPT-‐97, Portugal, June 1997.

144. M.D.Huda, R.Puyani, S.Sulaiman and M.S.J.Hashmi, “Optimization of sintering process for improved electrical characteristics of Zinc Oxide Varistors”, Proc.of Int. Conf. FAIM’96 Georgia USA pp.739-‐747.

145. Shamsuddin Sulaiman, Tang Sai Hong, “Gating system design in sand casting”, Proceeding of the 7th Int. Conf. on Machine Design and Production, Turkey Sept 11-‐13 1996.

146. Shamsuddin Sulaiman, Tham Chee Keen, “Flow analysis along runner and gating system of casting process”, Proceeding of Int. Con. on Material Processing, Hong Kong 12-‐14 Nov. 1996.

147. A.M.S.Hamouda, S.Sulaiman and M.S.J. Hashmi, “Fast Upsetting of circular cylinders of Aluminium Metal Matrix Composites: Experimental Results and Numerical Analysis”, Proc. of the 6th Int. Conference on Metal Forming ’96, Krakow Poland, Jun23-‐26 1996 pp.723-‐727.

148. Shamsuddin Sulaiman, “Expert System for Manufacturing Process”, Proc. Pacific Conf. on Manufacturing December 19 -‐ 22, 1994, Jakarta Indonesia pp.339-‐346.

149. Shamsuddin Sulaiman, Shahnor Basri, “An Application of Expert System in the Casting Process”, 5th International Conf. on Machine Design and Production September 16-‐18 1992, METU, Ankara-‐Turkey.

150. S. Sulaiman, D.T. Gethin, “An Application of a Thermal Network Analysis for Casting Simulation”, Proceedings of the 7th International Conference on Numerical Methods in Thermal Problems 1991. (Eds. Lewis, R.W., Chin J.H. and Homsey G.H), pp248-‐258.

Other Publications (Local/International News Coverage) NO Title

1 M.D. Azaman, S.M.Sapuan, S.Sulaiman, E.S.Zainudin, K,Abdan and M.R. Mansor, “Preliinary study the effect of packing pressure on thin-‐walled parts by injection moulding process”, The 2nd UPM-‐UniKL Symposium, on Polymeric Materials 2013, 28February 2013

1. M.U. Rosli, M.K.A. Ariffin, S.M. Sapuan and S. Sulaiman, “Material selection of thermoset matrix for natural fiber composites automotive armrest using AHP Method”, The 2nd UPM-‐UniKL Symposium, on Polymeric Materials 2013, 28February 2013.

2. M.Jolgaf, S.B.Sulaiman, M.K.A.Ariffin, A.A.Faieza and BT Hang Tuah Baharudin,’Optimization of plate forming process parameters’, Proceedings of EnCon2010, 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Suatainable Environment, April 14-‐16, 2010, Kucing Sarawak, Malaysia.

3. G.R.Esmaelian, M.M.H.M.Ahmad, S.Sulaiman, N.Ismail, “Assembly line and balancing assembly line”, Intelligent System and Information Technology Symposium 2007, 30-‐31 October 2007, ITMA, UPM Serdang Selangor.

4. S.S. Imihzri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman, “A comparison study on increasing injection location for glass fiber reinforced PA 6,6 composite automotive clutch pedal”, Proceeding of 3rd National Technical Postgraduate Symposium 2004 Dec 15th Kuala Lumpur.

/80

5. S.S. Imihzri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman “Mould Design Consideration for Injection

Moulding of Short Glass Fiber Reinforced Polyamide Composite for Clutch Pedal”, Proceeding of Advanced Technology Congress 2003, 20-‐21 May 2003, Putrajaya.

6. A. Manaf, N.Ismail, S.Sulaiman "Reverse Engineering Technique for Modelling Free form Feature Surfaces" Proceeding of Advanced Technology Congress 2003, 20-‐21 May 2003, Putrajaya.

7. P. Nopnakorn, N.Ismail, MMHM Ahamad, S.Sulaiman "A Prototype 2D Drafting System in ISO Mechanical Engineering Drawing Constraint" Proceeding of Advanced Technology Congress 2003, 20-‐21 May 2003, Putrajaya.

8. S.S.S.Imihezri, S.M.Sapuan, M.H.M. Ahmad and S.Sulaiman, “Product design consideration for short glass fibre reinforced composite clutch pedal” Proceeding of Advanced Technology Congress 2003, 20-‐21 May 2003, Putrajaya.

9. C.F.Tan, N.Ismail, S.V.Wong, S.Sulaiman and M.R.Osman "Development of A knowledge-‐based Feature Recognition for System for Mechanical Parts" Proceeding of AIAI Conf. 24-‐25 June 2003, Kuala Lumpur.

10. Ishak bin Aris, A.K.M.Parves iqbal, Shamsuddin Sulaiman, Abd. Rahman Ramli and Md Mahmud Hassan, “Development of a painter robot for construction industry”, Proceeding of AIAI Conf. 24-‐25 June 2003, Kuala Lumpur.

11. H.B.Lee, S.M. Sapuan, S.Sulaiman, M.M.H.M.Ahmad, ”Design and Rapid Prototyping Process for a Polymeric Based Composite Automotive Pedal Box System”, Proceeding of Symposium on Concurrent Engineering Manufacturing System for Polymeiric-‐based Composite Automotive Components, 25th July 2003, Faculty of Engieering UPM, Editor Mohd Sapuan Salit, pp5-‐20.

12. S.S.S.Imihezri, S.M.Sapuan, M.H.M. Ahmad and S.Sulaiman, “Product Design Consideration for Short Glass Fiber Reinforced Composite Clutch Pedal”, Proceeding of Symposium on Concurrent Engineering Manufacturing System for Polymeiric-‐based Composite Automotive Components, 25th July 2003, Faculty of Engineering UPM, Editor Mohd Sapuan Salit, pp55-‐63.

13. N. Ismail, C.F.Tan, S.V.Wong, M.R.Osman, S.Sulaiman, “ Rule-‐Based Feature Extraction and Recognition from STEP File”, 2nd Student Conference on Research and Development (SCOReD2002), July 16-‐17, 2002, Shah Alam, Malaysia.

14. Shamsuddin Sulaiman, A.K.Lim, Lai Tze Siung, Tan Chen Loon, “ Experimental and Thermal Transient of Sand Casting Process”, MechE Seminar on Information Technology in Mechanical and Manufacturing Engineering, 4th Oct 2001, UPM.

15. S. Sulaiman, Wong Choon Tat, “Mould design and fabrication for plastic injection moulding”, Malaysian Science and Technology Congress (C) 2001, Penang.

16. S. Sulaiman, Wong Choon Tat, “Design, Analysis and Simulation of plastic product”, Malaysian Science and Technology Congress(B) 2001, Melaka.

17. Elnougomi A.O, Desa Ahmad, Azmi Yahya, Shamsuddin S., “Development of tractor mounted peanut harvesting equipment”, UPM Engineering Research Seminar and Exhibition, 2-‐3 Oct 2001.

18. A.M.S. Hamouda, S. Sulaiman, “The Coming Era of Intelligent Materials: Business Opportunities”, Malaysian Science and Technology Congress ‘97, Genting Highlands, 13 -‐ 15 October 1997.

19. Shamsuddin Sulaiman, “Thermal Network Analysis for Casting Process in High Pressure Die Casting”, National Conference on Engineering Education and Research, 15-‐16 June 1993, UPM.

/80

20. S.Sulaiman, A.M.S.Hamouda and M.H.Megat, “Thermal Network Analysis Software TNAS”, Report

and Manual presented in Expo Science and Technology, 2-‐4 Nov 2002, PWTC Kuala Lumpur.

21. Gasing plastic, Menyusur akar orang kita, 6 Feb 2014 (Laporan Khas TV1, 6 Februari 2014: Jam 12:30 – 13:00)

f. Recognition/Awards

No Year

1. 2016 William Johnson Gold Award (Research and Academic Achievement)

2. 1998-‐2018

Excellent in Service Award 1998-‐2018

3. 2011 2 Bronze medals Research Award 4. 2011 Silver Medal for Invention, Research and Innovation Exhibition, Universiti Putra

Malaysia, 2011 (Investigator)

5. 2009 Bronze Medal for Invention, Research and Innovation Exhibition, Universiti Putra Malaysia, 2009 (Principal Investigator)

6. 2005 Silver Jublee Medal with zirconia, Research Award – Poland May 2005 Silver Medal Research Award (TNAS) – Invention and Research Exhibition Silver Medal Research Award (Corrugated Tubes Machine) Bronze Meal Research Award (Analysis and Fabrication of Injection Molded glass polyamide composite) Bronze Medal Research Award (Development of Intelligent Process Planning system for prismatic parts)

7. 2003 Who’s Who in the World 20th Edition 2003

8. 2002 Gold Medal Research Award – R&D Exhibition UPM Silver Medal Research Award – Expo S&T 2002 Ministry of Science, Technology and Environment of Malaysia

9. 1995 Asian Development Award for training in Akron Ohio USA Felowship program in China-‐ UNESCO 1995

H. Professional Services

a. International No Detail Designation Year

1. 7th UNIKOP Regional Development Symposium,Kirikkale University, Turkey, Oct 17-‐19, 2019.

Keynote Speaker

2. International Conference on Advanced Material Processing Technology , Taipei, Taiwan, 20-‐24 Oct 2019

Steering Committee Member 2019

3. International Conference on Advances in Mechanical and Manufacturing Engineering 2019, 20-‐24 Oct

Organising Committee Member 2019

/80

2019, Langkawi Malaysia

4. International Conference on Advanced Material Processing Technology , Dublin Ireland, 25-‐28 Sept 2018


5. 2018 International Conference on Material Engineering and Manufacturing, May 26-‐28, Xi’an China

Program Chair Plenary Speaker

2018

6. International Conference on Advanced Material Processing Technology ,Chennai India, 4-‐9 Oct 2017 2016


7. International Conference in Computional Methods in Engineering and health sciences (ICCMEH)

International Advisory Board Since 2017

8. International Conf. on Industrial Engineering and Industrial Management, Rome, Italy Jan 3-‐5, 2017.

Technical Committee Member Since 2017

9. International Manufacturing Engineering Conference iMEC

International Advisory Committee Since 2017

10. 2nd International Conference on Mining, Materials and Metallurgical Engineering March 17-‐19, 2017, Bangkok, Thailand

Program Chair 2017

11. International Four Seminars on Elsevier Materials Reference Module to Chinese Librarians Oct 16, Beijing, China Oct 18, Jinan, Shangdong Provinve, China Oct 20, Zhengzhou, Henan Province, China Oct 22, Shijiazhung, Hebei Province, China

Main Speaker 2017

12. International Conference on Advanced Material Processing Technology ,Kuala Lumpur, 15-‐19 Sept 2016.


13. Elsevier eBook Forum, 5-‐7 Sept 2016, Singapore

Panel Forum 2016

14. Journal of Industrial and Inteligent Information, USA

Editorial Board Since 2016

15. International Conf. on Design, Materials and Manufacturing, Kuala Lumpur, 25-‐27 May 2016.

Keynote Speaker/International Advisory Commettee member

2016

16. 2006 International Conference on Mechanical, Manufacturing, Modelling and Mechatronics (IC4M 2016), Kuala Lumpur, 27-‐29 Feb 2016.

Program Committee Chair 2016

17. International Conf. on Mechanical Automation and Control Engineering, February 27-‐29, 2016, Phuket, Thailand

Technical Committee member 2016

18. Collaboration Meeting/Visit for Manufacturing Diesel Engine, by Uni-‐Tech Saudi Arabia, Jubail Industrial City, 31961 Jubail. 18-‐21 Feb 2016.

Panel Meeting 2016

/80

19. 5th International Conf. on Key Engineering Materials

(ICKEM 2015), March 21-‐23, 2015, Singapore.

Honorary Chair 2015

20. Internaational Conf. on Material, Engineering and Technilogy (ICMET 2015), July 1-‐2, 2015, Bali Indonesia.

Honorable Committee Member 2015

21. 4th International Conf. on Manufacturing and Industrial Engineering (ICMIE 2015), March 21-‐23, Singapore.

Honorary Chair 2015

22. Jurnal Kejuruteraan UKM International Advisory Board Member

1st Jan 2015 – 31st Dec 2018

23. American Journal of Software Engineering and Application

Editorial Board Since 2015

24. International Conference on Advanced Material Processing Technology, Madrid, Spain, Dec 14-‐17 2015.

Steering Committee member 2015

25. Internaational Conf. on Material, Engineering and Technilogy (ICMET 2014), July 17-‐18, 2014, Bangkok, Thailand.

Honorary Chair 2014

26. International Conf. on Material, Engineering and Technilogy (ICMET 2014), July 17-‐18, 2014, Bangkok, Thailand.

Keynote Speaker 2014

27. CUTSE2014 Curtin University Science and Engineering International Conference, 3-‐4 December 2014, Kucing, Sarawak, Malaysia.

Scientific Committee Member 2014

28. 4th International Conference on Key Engineering Materials (ICKEM2014), March 22-‐23, 2014, Bali Indonesia.

Honorary Chair 2014

29. International Conference on Advanced Material Processing Technology, Dubai UAE, Nov 16-‐20, 2014.


30. American Journal of Software Engineering and Application

Editorial Board Member 2014 – To date

31. International Journal of Optimization Control: Theories and Applications

Editorial Board Member 2013 – To date

32. International Conference on Advanced Material Processing Technology, Taipei, Taiwan. Sept 22-‐26, 2013.


33. International Conf. on Advances in Mechanical and Manufacturing Engineering (ICAM2E) 2013, Kuala Lumpur.

Organising Committee Member/ Session Chairman

2013

/80

34. 2013 World Congress on Electronics and Electrical

Engineering, December 29-‐30, 2013, Kuala Lumpur.

Program Chair 2013

35. Int. Conf. of Manufacturing Engineering (iMEC) Kuantan Pahang, Malaysia, Sept 21-‐23, 2013.

International Advisory Committee 2013

36. Int. Conf. on Mechanical and Electrical Technology (ICMET2013), Chengdu, China, July 20-‐21, 2013.

Conference Chair 2013

37. Int. Conf. on Mechanical and Electrical Technology (ICMET2013), Chengdu, China, July 20-‐21, 2013.

Keynote Speaker 2013

38. International Conference on Advanced Material Processing Technology Wollongong Australia, 23-‐25 Sept 2012.


39. International Conference on Advanced Material Processing Technology ,Istanbul, Turkey 13-‐16 July 2011


40. International Conference on Advanced Material Processing Technology Paris, France, Oct 2010.


41. International Journal of Optimization and Control: Theories & Application, ISSN: 2146-‐0957, eISSN:2146-‐5703, Dora Co. Ltd, Bursa, Turkey

Editorial Advisory Board 2010-‐To date

42. International Conference on Advanced Material Processing Technology, Kuala Lumpur, Malaysia, September 2009.


43. Journal of Advanced Material and Processing Technology, Taylor and Francis

Editorial Board Member 2009-‐to date

44. International Conference on Advanced Material Processing Technology, Manama, Bahrain Oct 2008.


45. International Conference on Advanced Material Processing Technology Seoul, Korea, October 7-‐10, 2007


46. 12th Int. Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S 2006, Gliwice, Poland. 27-‐30 November 2006.

International Programme Committee Member

2006

47. International Conference on Advanced Material Processing Technology Las Vegas, Nevada, USA, July 30-‐August3, 2006.


48. 11th Int. Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S 2005, Gliwice, Poland. 6-‐9 December 2005.

International Programme Committee Member

2005

49. International Conference on Manufacturing and International Committee Member 2006

/80

Material Processing, Kuala Lumpur March 2006.

50. International Conference on Achievements in Mechanical and Material Engineering, Gliwice-‐Wisla, Poland. 16-‐19 May 2005

International Committee Member 2005

51. International Conference on Advanced Material Processing Technology Gliwice-‐Wiala, Poland. 16-‐19 May 2005


52. 3rd International Conference on Advanced Manufacturing Technology ICAMT 2004, Kuala Lumpur, 15-‐18 May 2004


53. 12th International Scientific Conference on Achievement in Mechanical and Materials Engineering AMME2002 Gliwice-‐ZaKopane Poland 7-‐13 Dec 2003


54. 11th International Scientific Conference on Achievement in Mechanical and Materials Engineering AMME2002 Poland 10-‐13 Dec 2002.


55. International Conference on Advanced Material Processing Technology 8-‐11July 2003 Dublin, Ireland


56. International Conference on Advanced Material Processing Technology 19-‐21 Sept 2001 Madrid Spain


57. Advances in Material and Mechanical Engineering Conference AMME , Poland, 20-‐22 Sept 1999.


58. International Conference on Advanced Material Processing Technology, 2-‐6 August 1999 Dublin, Ireland.


59. 10th Jublee International Scientific Conference on Achievement in Mechanical and Materials Engineering AMME2001 Cracow, Poland 9-‐13 Dec 2001


60. Symposium on Advanced Materials & Design , 29-‐31 May 1999 Orlando USA.


61. International Conference on Advanced Material Processing Technology 27-‐29 August 1998 Kuala Lumpur

Chairman 1998

b. National No Detail Designation Duration

1. Bac. Eng. Hons (Manufacturing eng). Faculty of Mechanical Engineering UMP, Pekan, Pahang.

External Assessor 2019-‐2020

/80

2. Infrastructure University Kuala Lumpur

IUKL

Industrial Advisory Panel

2015-‐2016

3. B. Tech (Manufacturing) B.Tech (Product Design) Dept. of Manufacturing Technology Faculty of Engineering Technology, UTeM.


4. Bac. Tech (Manufacturing). Faculty of Mechanical Engineering UMP, Pekan, Pahang.


5. B.Eng (Manufacturing) University of Malaya.

Advisory Panel 2014

6. Lembaga Pengelola Sekolah Menengah Agama MAIWP

Board Member 2014-‐2018

7. Research Grant Ministry of Higher Learning, Malaysia

Assessor Panel 2013-‐2019

8. Board of Study MSc Eng (Manufacturing Eng) IIUM.

Advisory Panel 2013-‐2016

9. Board of Study (Bac. Tech. Manufac. Design), IPROM UniKL

Industrial Advisory Panel Member

2013-‐2015

10. B. Eng Tech (Automotive) MSI, UniKL, Kulim


11. Bac. Sc (Manufacturing Eng) School of Mechanical Eng. USM.

External Assessor 2008/2009

12. UITM, UTM, UKM, IIUM, UMP, UTeM, UniKL, USM,

External Assessor Panel (Promotion of Professorship)

2005-‐ To date

13. Bac. Sc (Mech). Faculty of Mechanical Engineeirng UMP, Pekan, Pahang.


14. Master of Eng (Manufacturing) School of Manufacturing Engineering, UNIMAP.

External Assessor 2013/2014-‐2014/2015

15. Jabatan Perkhidmatan Awam (Federal Training Funds)

Expert Panel/Judge 2013

16. Board of Study (MS Manufac. Eng) International Islamic University Malaysia

Advisory Panel Member 2011-‐2012

17. TATI Univ. College, Kemaman. External Assessor 1st June 2009-‐30th May 2011

18. Malaysian Qualifications Agency (MQA) Expert Panel 1998-‐ To date

/80

19. Department of Mechanical Engineering

University Tenaga Malaysia (UNITEN)

Industirial Advisory Panel Member

1st July 2009-‐30th June 2011

20. 9th National symposium on Polymeric materials 2009 15-‐16 December 2009, Hotel Residence, UNITEN

Committee Member 2009

21. National, National Symposium on Polymeric Materials 2009

Scientific Committee 2009

22. National, Conference proceeding 9th National Symposium of Polymeric Materials NSPM 2009

Chief Editor 2009

23. National, National Symposium on Polymeric Materials 2009

Advisor 2009

24. Bhg Pendidikan dan latihan (Kemahiran) MARA

Curriculum Advisory Committee

2005-‐To Date

25. National Vocational Training Council Ministry of Human Resources, Malaysia

Trade Advisory Committee (Foundry)

1999-‐ to date

26. Advanced Material Working Group Ministry of Science, Technology and the Environment of Malaysia

National Working Committee

1997-‐2002

27. Japan-‐Malaysia Technical Institute (JMTI) Ministry of Human Resources, Malaysia

Chairman, National Training Advisory

Committee

1999-‐ To date

28. The Second World Engineering Congress 22-‐25 July 2002, Kuching Sarawak, Malaysia

Technical Committee (Manufacturing Division)

2002

29. Grant Evaluation Committee (Manufacturing/Engineering and Technology Division) Ministry of Science, Technology and the Environment /Innovation of Malaysia

Panel Member 2000 – To date

30. Kolej Negeri, Seremban

Advisory Member 2002-‐2005

31. Research & Development Exposition 2003 9-‐12 October 2003 PWTC Kuala Lumpur

Organising Committee Member

2003

32. National Vocational Training Council Ministry of Human Resources, Malaysia

Trade Advisory Committee (Plastic Industry)

1995-‐1998

33. Development of Curriculum for National Occupational Skill Standard, National Vocational Training Council Ministry of Human Resources, Malaysia

Committee Member Oct 1992-‐1996

/80

c. Technical Reviewer (Selected)

No Journal/Conference Designation Duration

1. Materials and Design

Reviewer 2005-‐ to date

2. Material Processing and Technology

Reviewer 2001-‐To date

3. Alloys and Compound


4. ICAM2E, Conference

Technical Reviewer 2013

5. Ain Shams Engineering Journal

Reviewer 2013-‐to date

6. Machining Science and Technology


7. Journal of Mechatronics


8. Journal of Petroleum and Gas Engineering


9. Journal of ISSAAS


10. IEM Journal of Institute of Engineer Malaysia


11. Key Engineering Material 2010

Reviewer 2010

12. World Engineering Congress 2010, Serawak


13. NSPM 2009, National Symposium of Polymeric Materials


14. World Engineering Congress 2007, Penang


d. Examiner/ Evaluator

PhD External Examiner (International)

No Title Name Univ. Year

1.

Numerical and experimental investigations on forming limit analysis for AISI 316, 316L and 316LN austenitic stainless steel

Ramados Anna, India

2008

2. Mechanical alloying, spark plasma sintering and characterisation of Fe-‐Ni nanopowder

T. Ashokkumar Anna, India 2011

3.

Theoretical and experimental studies on evaluation of friction factor in extrusion process of AA6063 and AA6063/SiCp composites

V. Jayaselan Anna, India 2013

4. Experimental Investigation on drilling of polymer matrix composites and GFRP/Aluminium stack

R. Raja Anna, India 2015

5. Significance of equal channel angular pressing A.T. Vijaya Anna, 2015

/80

parameters on the structural enhancement of commercial purity copper

Shakrhivel India

6. Optimization of process parameters of dissimilar aluminum joint by friction stir welding

Sabitha Jannet Anna, India 2016

7.

Study on influence of coated tool electrode in electrochemical micromachining of Inconel 718 alloy

S.Subramaniam Chennai, India 2017

8. Intelligent classification techniques to detect malicious nodes in mobile adhoc networks

A.R. Rajeswari Chennai India

2017

9.

Design, simulation and performance analysis of a modifies architecture for 3D network on 3D printing Industry

A. Karthikeyan Chennai India 2017

10. Experimental parametric analysis on AL-‐6061 honeycome core sandwich structure under flexural and low velocity impact test

K. Kalichelvan Chennai, India

2019

PhD External Examiner (National)

No Title Name Univ. Year 1.

Microstructures and Mechanical Properties of Aluminium-‐Silicon Bar Produced by net shape Casting Process

Dodi Proyitno

UTM

2001

2.

Numerical and Experimental Analysis of Powder Compaction Process

Md Mujibur Rahman

UKM

2001

3.

Prehated machining of hardened steel AISI D2 and optimization of parameters

Mohd Amri Lajis

IIUM

2009

4.

Development of Metal Injection moulding

Khairul Rijal Jamaluddin

UKM

2009

5.

Effect of Surface roughness on micro-‐idententation

Chuah Hun Guan

USM

2012

6.

Optimization process on Powder injection Moulding

Nur Hafiez Mohamad Nur

UKM 2012

7.

Optimization of machining processes by using criteria of maximum productivity and Mionimujm cost

Aead M. Ahmed

UNIMAP

2012

8.

Design and Development of impeller Wind Turbine

Ahmaed Younus Qasim

UNIMAP

2012

9.

Pendekatan kawasan kerja untuk meramalkan pembidas bagi jasad putih automotif bahagian dibentuk

Nagur Aziz Kamal Bashah

UKM

2013

10.

Theoretical modelling of process performance in micro-‐electro-‐discharge machining for nonconductive ceramics

Abu Naim Muhammad Abdus Sabur

IIUM

2014

/80

11.

Modeling of processing condition for polypropylene-‐nanaclay integral hinges at high heat exposure,

Mohd Hilmi Othman

UTHM

2015

12.

Effect of tool path strategies on machining performance

Muhammad Riza

IIUM

2015

13.

Mahalanobis-‐ Taguchi system as a decision making tool for remanufacturing automotive component

Mohd Yazid Abu

UTM

2015

14.

Pembangunan Aloi aluminium untuk pemprosesan logam separa pepejal

Mohd Shukur Salleh

UKM

2015

15.

Penghasilan kelli tahan karat berbusa melalui kaedah pengisi pemegang ruang-‐pengacuanan suntkan logam

Tan Koon Tatt

UKM

2015

16.

Effect of substrate thickness layer on the mocrostructure , mechanical and wear properties of AlTiN layer coating deposited on Tungsten Carbide insert cathodic arc PVD technique

Kamil Jawad Kadhim

UTeM

2015

17.

Process parameter effects on Low-‐cost hybrid structure of dissimilar materials made by friction stir welding

Sadiq Aziz Hussein

UTeM

2016

18.

An experimental and simulation studies of transient heat transfer in electronic packaging

Ong Kean Aik

USM

2016

19.

Layed manufacturing of functionally graded polymer matrix composite (PMC) materials via fused deposition modellinf (FDM)

Nasuha bin Sa’ude

UTHM

2016

20.

Framework for on-‐site welding of creep strength enhanced ferrite (CSEF) pipes for supercritical condition steam

Muhammad Sarwar

UTP

2016

21.

Development and application of Ultrasonic Soldering for lap joint between Galss and Pewter

Mohd Yusry Mustafa

IIUM

2016

22. Correlation of tool engagement and tool path strategy

Roshaliza Hamidon IIUM 2016

23. Surface modification of stainless steel Zakaria bin Mohd Zain

IIUM 2017

24.

Development and characterization of local silica sand as mould materials for copper and aluminium alloy casting

Siti Zaleha Mohd Nor

UMT 2017

/80

25. Machinability study and analytical model development during HS ductile machining

Nasima Bagum IIUM 2017

26. Experimental and Simulation of Residual Stress Relaxation of 2024-‐T351 Aluminium Alloy.

Fareg Saeid Moftah Ali UNITEN 2017

27. Mitigation of BWE inintegrated manufacturing H.M.Emrul Kays IIUM 2017

28. Surface enhancement of friction stir welding tool Seyed Sattar Emamian UTP 2017

29. 3D Reconstruction and Design of Patient specific implant based on computed tomography images

Johari Abdullah USM 2018

30. Experimental investigation and molding on MG, TIG and laser welding of Aluminium alloy EN AW 6082-‐T6

Elfi Rahayu binti Imam Fauzi USM 2018

31.

Studies on microstructural and wear properties of Fe-‐Base hardfacing materials deposited on carbon steel based metal

Afzalleh Jilleh UITM 2018

32.

Thixoforming A319 Aluminium alloy with copper and magnesium addition for wear properties enhancement

Khaled S.M. Alhawari

UKM 2018

33.

Experimental analysis of coated and uncoated carbide tool in drilling AISI316L austnite stainless steel using minimum quality lubricant technique

Mukhtar bin Malik UMP 2018

34. Laser surface modification of grey cast iron for surface properties improvement

Zulhishamuddin Abdul Rahman UMP 2018

35. Thermal and surface integrity study of AZ31C Magnesium Alloy influenced by cryogenic turning

Mohd Danish UTP 2018

36. Effect of deposition of nanoparticles during joining of dissimilar metals by friction stir welding

Baridula ravinder Reddy

UMP 2018

37.

An algorithm for minimization of nosocomial infection risk through upgrading and re-‐architecting of healthcare facilities

Yasaman Parsia UMP 2019

38. Laser surface melting to enhance surface properties in hot press forming die

Norhafzan binti Bariman

UMP 2019

39. Summation od the spectral expansion associated with the solvability of the heat and wave problem

Fargana Akter IIUM 2019

40. Development of Generative Computer-‐Aided Process Planning System for Lathe Machining

Ahmad Faiz bin Zubair USM 2019

41.

Mechanical, Thermal and Electrical Properties of ABS-‐NiZn-‐FeO composites fabricated using FDM 3D Printer

Shulizawati Aqzna bt Sazali UniMAP 2019

42. The influence of quality under supply chain management

Abdullah AlRashidi IIUM 2019

/80

43.

Fatigue life and mechanical properties of aluminium alloy AA6061 chips prepared by solid-‐state recycling using hot extrusion

Mohammed Hussein Rady UTHM 2019

44. Mechanical and formability analysis of low laser welded dissimilar AA5052-‐H32 and AA6061-‐T6 Aluminium Alloys

Mohd Fadzil Jamaludin

USM 2019

Master External Examiner (National)

No Title Name Univ. Year 1.

Analysis of Flow Phenomena in Metal Injection Moulding Process

Nor Hafiz Mohamad Nor

UKM

2001

2.

Static and Dynamic Analysis of a Drawing Die

Sethuraman s/o Vatiapan

UM

2000

3.

Evaluation of cost effective of Manufacturing Processes for producing Metal implant

Mohamad Tarmizi Omar

USM

2002

4.

Kajian Eksperimen dan Komputer bagi perolakan tabir di atas permukaan isoterma dan bukan-‐isoterma pada perbezaan sudut condong

Sii Tuong Ngan

USM

2003

5.

Effects of induced damages on the flexural fatique behaviour of glass fiber reinforced epoxy (GREs)

Wong Teck Kai

UNIMAS

2003

6.

Numerical simulation failure of steel plates impated by blunt nose projectiles using pam shock

Faidzuli bin Ismail

USM

2004

7.

Development of a computer aided die design system (CADDS)

Azuddin Mamat UM 2004

8.

Pemprosesan Selari Dalam Simulasi Perambatan Retak Menggunakan Kaedah Induk-‐Pekerja

Choy Hau Yan

UKM

2004

9.

Heat transfer of compact heat exchanger

Shamsul Bahari bin Azraai

USM

2005

10.

Optimal design of femoral hip prosthesis using topology optimisation to reduce stress shielding

Mohamad Ikhwan Zaini bin Ridzwan

USM

2005

11.

Failure Analysis of Low-‐Velocity impact on composite plate

Muhammad Zulkarnain

USM

2005

12.

Thermal Management of both component and system levels in Elctronics Packaging

Ong Kean Aik

USM

2006

13.

Prediction of microelectronics encapsulation process using finite difference method

Mohammad Khalil Abdullah

USM

2006

14.

The relationship between the applied torque and stresses in post-‐tension structures

Liew Fui Kiew

UNIMAS

2006

/80

15.

A study on the effect of different solder constitutive models on the life time estimation of Lead-‐Free Solder joint using finite element method.

Abdullah Aziz Saad

USM

2006

16.

Kerlakuan aliran dalam process pengacuan suntikan logam.

Norazizah Ma’som

USM

2007

17.

Kajian eksperimen dan berangka bagi dua pakej PLCC dipasang debaris secara mengufuk.

Sharupuddin Yusoff

USM

2008

18.

Design and geometric optimization of an axial ventricular assist device for reduced blood shear stress

Dhyaa Hadi Hussein

USM

2009

19.

Design and analysia of mechanical mating interfaces for reconfigurable machine tool

Normariah Che Maideen

USM

2010

20.

Product design and development

Salina Budin

USM

2011

21.

Thermal effect on packaging process

Ahmad Razlee

USM

2011

22.

Development of tool and jig of machining

Mazlan Mohamed

USM

2011

23.

Development of packaging device Khaleed Hussein

USM

2011

24.

Numerical Method for Chip Flip Packa

Mior Firdaus Mior Abdul Majid

USM

2012

25.

Development of multi-‐component device loads, torque and temperature measurement for Friction Stir Welding Process

Jauhari Tahir Khairudin

USM

2012

26.

Effect of moisture on ABS Filament material for FDM Rapid Prototyping

Siti Nur Amalina Mohd Halidi

USM

2013

27.

Thermal performance analysis and characterization for mobile radio

Chee Jiunn Shyong

USM

2013

28.

Effect of variable helix and pitch tool geometry on the process damping performance in End milling processes

Muhammad Adib Shaharun

UMP

2014

29.

Development of Natural fibre composite for engineering application

Nurul Farah Adibah Mohd

UTeM

2014

30.

Experimental and Statistical analysis for surface modification of steel and cast Iron using Nd:YAG Laser

Fazliana Fauzun

UMP

2015

31.

Surface roughness optimization (Opsurf) in Milling Operation of Polyurethene Block

Louis Denis Kevin UNIKL 2015

32. Investigation of Aluminium powder based feedstock mouldablity and optimization of mixing and injection moulding process parameter

Nurun Nahar Begum UM 2015

/80

33.

Effect of injection moulding parameters on warpage deflection

Siti Salamah Mohd Sani

UTeM

2015

34.

Thermal response on nanofluids in the presence of magnetic field with variable stream condition.

Vibhu Vignesh Balachandar

UTHM

2015

35.

Simulation studies and experimental investigation of temperature and residual stresses in dissimilar metal joints by friction stir welding technique

Yattapu Yaseanth

UMP

2016

36.

Morphometric analysia and fabrication of prosthetic ear using cad/cam and additive manufacturing technologies

Nor Azura bt Mohamed

USM

2016

37. Determination of Electrical measurement to detect poor thermal dissipation devices using TRIZ

Ong Ming Chung UTeM 2016

38. Numerical analysis during encapsulation process in molded underfill with multi flip chip package

Muhammad Afiq bin Azmi USM 2016

39.

Improvement of Machining Performance for steel grade 760 using Magnetic field assisted Al2O3 powder-‐mixed EDM

Raja Nurul Hidayah Raja Ismail

IIUM

2016

40. Modification of austenitis cast iron (ni-‐resist) with higher manganese content by using heat treatment

Khairul Muzafar bin Ahmad

UMP 2017

41. Feasibility of implant manufacturing using 3D printing and silicone molding

Siti Norsyahirah Abul Razak USM 2017

42. Influence of low concentration diamond water nanofluid on heat transfer in loop heat pipe

Tan Siew Aun USM 2017

43. Failure mode and effects analysis based integrated framework to improve operational performance in advanced manufacturing environment

Liew Chen Fung UTAR 2019

e. Examination Committee of PhD Universiti Putra Malaysia

No Name Category Year 1. Munerah A.B.S.Faraj Chairman 2019 2. Zuliana binti Ismail Chairman 2019 3. Amir Parnianifard Chairman 2019 4. Tan Kai Jin Chairman 2018 5. Farah Kamil Abid Muslim Chairman 2017 6. Mohammed Idris Mohammed Chairman 2017 7. Ali Alimoradi Chairman 2016 8. Aidin Delgoshaei Chairman 2016 9. Chng Ming Hui Chairman 2016 10. Zohreh Molamohamadi Chairman 2015 11. Afsaneh Nouri Houshyar Chairman 2015

/80

12. Navid Mortezaei Chairman 2015 13. Seyed Jafar Golestaneh Chairman 2014 14. Reza Shahrjerdi Chairman 2014 15. Ang Chun Kit Chairman 2014 16. Marjan Bahrami Nasab Chairman 2014 17. Salwani Mohd Salleh Chairman 2013 18. Ahmad Baharuddin Abdullah Chairman 2013 19. Yousuf Ali Gumaan El-Shekeil Chairman 2012 20. Solehuddin bin Shuib Chairman 2012 21. Dandi Bachtiar Chairman 2012 22. Shahram Ariafar Chairman 2012 23. Karmegam a/l Karuppiah Chairman 2012 24. Maryam Hamedi Chairman 2012 25. Mohammad Anisseh Chairman 2012 26. Hadi Mohammadi Bidhand Chairman 2011 27. Januar Parlaungan Siregar Chairman 2011 28. Riza Wirawan Chairman 2011 29. Puvanasvaran a/l A. Perumal Chairman 2009 30. Edi Syams bin Zainudin Chairman 2009 31. Majed Gh Alshammar Member 2019 32. Bader M.S.M. Aladwani Member 2019 33. Abdul Azim Abdul Rahman Member 2019 34. Bernard Maxmillan Sim Member 2019 35. Andy Al-Affendi Abdullah Member 2018 36. Nor Aiman Sakundar Member 2018 37. Rosdi Mohammad Member 2018 38. Firous Fadaeifard Member 2017 39. Ng Tan Ching Member 2016 40. Morteza Ghobakhloo Member 2015 41. Rosli Darmawan Member 2015 42. Zahra Firoozi Member 2015 43. Seyed Mahdi Homayouni Member 2015 44. Seyed Hamidreza Sadeghian Member 2015 45. Umar Ali Umar Member 2015 46. Abdolhossein Sadrnia Member 2014 47. Weria Khaksar Member 2013 48. Mohamad Ridzwan Ishak Member 2012 49. Omar Suliman Zaroog Member 2011 50. Omid Ghahraei Member 2011 51. Mohammad Abolshah Member 2011 52. Zulkifle Leman Member 2010 53. Abdalla F. Hamed Member 2009 54. Haslina Arshad Member 2008 55. Ahmed Ali Ahmed Qitoon Ai-Shahri Member 2009 56. Mehdi Bayat Member 2009 57. Hayder M.A.Ali Al-Assadi Member 2008 58. Haslina binti Arshad Member 2008 59. Faris Tarlochan@Rameshjit Singh Member 2007

Examination Committee of MS Universiti Putra Malaysia

/80

No Name Category Year 1. Abu Hatim Ibrahim Chairman 2013 2. Saeed Jabalamelian Chairman 2012 3. Mohammadmehdi Shahzamanian Sichani Chairman 2011 4. Amir Davish Hosseini Chairman 2010 5. Faezah Jasman Chairman 2009 6. Maznah Iliyas Ahmad Chairman 2009 7. Alysius D’cruz a/l Joachin Decruz Chairman 2009 8. Yap Ai KIn Chairman 2009 9. Mahmood Reza Khabbazi Chairman 2009 10. Mohd Zuhri Mohamed Yusoff Chairman 2009 11. Mohammad Hayasi Chairman 2008 12. Shamini a/p Patpanavan Chairman 2008 13. Alireza Esfandyari Chairman 2008 14. Majid Davoodi Makinejad Chairman 2007 15. Abolfazi Golshan Member 2014 16. Mesyam Toozandehjani Member 2014 17. Majid Moayedfar Member 2013 18. Mohamad Maaroff Baharudin Member 2013 19. Nurhaiza Shahrir Member 2013 20. Erialdi Syahrial Member 2012 21. Mohd Solah Deraman Member 2012 22. Shaik Mohamed Mohamed Member 2009 23. Khairul Azmi Md Rezali Member 2009 24. Syed Abdul Hakim Syed Majid Member 2008 25. Norhisham Seyajah Member 2008 26. Suraini bt Mat Jusoh Member 2007 27. Zulkifli Member 2007 28. Hidayatullah Hj Husein Member 2005

f. Accreditation exercise under MQA

No Institution Level Year Designation

1. UTeM Master of Mech. Eng. PA10825

May 2018 Chairman

2. Linton Univ. College Bac. Sc. (Hons) Mech. Eng FA0410 -‐ Extra

March 2018

Chairman

3. UniKL Master of Eng Tech. (Manufac.) Pematuhan

Sept 2018 Chairman

4. UMP Master of Industrial Engineering FA5041

March 2017

Chairman

5. Heriot-‐ Watt University Malaysia

Bac. Eng (Mech Eng) FA4095

March 2017

Panel

6. UMP M Mech Eng PA1980

Feb 2017 Panel Member

/80

7. Linton Univ. College Bac. Sc. (Hons) Mech. Eng FA0410

Aug 2018 Chairman

8. Kolej Universiti TATI B. Manufac. Eng Tech (Tooling) A8985

Nov 2016 Chairman

9. KDU College Penang Campus

B.Eng (Hons) Mech. Eng FA4957

Aug 2016 Panel

10. UTeM Master of Mech. Eng (Applied Mechanics) FA1457

Jun 2016 Chairman

11. UniKL Bac. Eng Tech (Hons) Tool and Die A10135

July 2016 Chairman

12. UniKL Bac. Eng. Tech (Hons) Product Design A10835

July 2016 Chairman

13. UniKL Bac. Eng. Tech (Hons) Industrial Design A8782

Aug 2016 Chairman

14. UniKL Bac. Eng Tech. (Hons) Manufacturing System A8783

Aug 2016 Chairman

15. UniKL Bac. Eng Tech. (Hons) Business Management FA0919

Aug 2016 Chairman

16. UTeM Master of Mech. Eng (Energy Eng) FA1498

Jun 2016 Chairman

17. City Univ. College of Science and Technology

Bac. Of Engineering Management (Hons) PA0453

Nov 2015 Chairman

18. UMP Master of Industrial Engineering PA5041

June 2014 Panel

19. KDU College Penang Campus

B.Eng (Hons) Mech Eng. PA4957 Nov 2014 Panel

20. Lincoln Univ. College Bac. Of Tech. in Mech. Eng PA4387

Dec 2013 Chairman

21. GMI-‐ UMP Bac. Of Eng. Tech (Manufacturing) PA2290

May 2013 Chairman

22. KOLEJ ANTARABANGSA TEKNOLOGI & PROFESIONAL

Dip. Tech. Mechanical (Gas) PA April 2013 Chairman Panel

23. UNITEN MS Mechanical Eng. PA9733 April 2013 Panel

24. UTHM MS Manuf. Eng PA3097 Dec 2012 Panel

25. UNISZA B. Manuf. Tech (Prod. Design) PA3118

Dec 2012 Panel

26. UNIMAP B. Mech Eng PA2969 Dec 2012 Chairman Panel

/80

27. UNIKL M.Eng Tech (Manuf.) A8065 Sept 2012 Chairman Panel

28. UMP M Mech Eng PA1980 Apr 2012 Panel Member

29. TATI B Manuf. Eng. Tech (Prod. Management PA2033

Apr 2012 Panel Member

30. UTeM MS Mech. Eng (Energy Eng) PA1498

Dec 2011 Chairman

31. UTeM MS Mech. Eng (Energy) PA1495

Dec 2011 Chairman

32. UTeM M Mech. Eng (Product Design) Nov 2011 Panel Member

33. UTP MS Mech. Eng A8048 PhD Mech Eng A8419

July 2011 Chairman

34. TATI B Manuf. Eng. Tech (Tooling) A8985

Jun 2011 Chairman

35. IPROM UNIKL BEngTech Manuf. System A8783 May 2011 Chairman

36. UTeM BTech Manuf. Eng (Product Design) PA0701

May 2011 Panel Member

37. UTeM BTech Manuf. Eng (Process and Tech) PA0700


38. IPROM UNIKL BEngTech Tool and Die A10135 Feb 2011 Chairman

39. UTHM BTech Mech. Eng (Manuf) PA0714 April 2011 Panel Member

40. UC Linton BEng Mech. Eng. PA0410 March 2011

Panel Member

41. UNIMAP MS Manuf. System Eng PA0513 Feb 2011 Panel Member

42. City UC of Science and Tech

BEng Management PA0453 Feb. 2011 Panel Member

43. IPROM UNIKL BEngTech Prod. Design A10835 Feb 2011 Chairman

44. MMU MEng. Advanced Manuf. Eng A5835

April 2010 Chairman

/80

45. UC SEGI Subang Jaya BEng Mech Eng collaboration with Univ. of Sunderland A7814

April 2010 Chairman

46. UC SEGI Damansara BEng Mech Eng collaboration with Univ. of Sunderland A7451

July 2010

Chairman

47. UNIMAP BEng (Manuf. Eng) AA0361 BEng (Mech. Eng) AA0365 BEng (Prod. Design) AA0364


48. UNIMAP BEng (Metallurgical Eng) AA0363 BEng (Materials Eng) AA0362

May 2010 Chairman

49. Univ. of Nottingham in Malaysia (UNIM)

BEng (Mech Eng) A10469 May 2009 Panel Member

50. UNIKL-‐MFI BEngTech Mechatronics KR10026 March 2009

Panel Member

51. KLIUC Dip. Mech. Eng A5270 Nov. 2009 Chairman

52. UNITEN MS Mech Eng KA9733 Nov 2008 Panel Member

53. College of WIT HND Mech Eng A3197 Jun2008 Chairman

54. OUM Dip. Mech Eng. A5716 August 2008

Panel Member

55. OUM Bac. Manuf. Management KA9206 Jun2008 Panel Member

56. International UC INTI UK Degree Transfer Programme – Mech Eng A8338

April 2008 Panel Member

57. Int. UC Tech Twintech M. Mech and Manuf. Eng KA8018 Feb 2007 Panel Member

58. WIT College Dip. Mech Eng. A3037 HND Mech Eng A3197

July 2007 Panel Member

59. UTP PhD Mech Eng KA8419 Aug 2007 Panel Member

60. UniKL-‐MSI BTech Mech. Eng (Automotive) KA8201

June 2007 Panel Member

/80

61. KLIUC BTech Applied Automotive KA8381

July 2007 Panel Member

62. UNITEN MS Mech Eng. KR8589 Aug 2007 Panel Member

63. UNIKL-‐ Kampus Kota BEng Tech Manuf. System KA8783 Oct 2007 Chairman

64. UNITEN MS Mech. Eng A1186 April 2006 Panel Member

65. SEGI College Subang Jaya B.Eng Mech. Eng. KA7451 June 2006 Panel Member

66. UniKL-‐ MFI Dip. Tech Welding Eng. A1481 May 2006 Chairman

67. PSDC Dip. Mech/Mechatronics Eng. KA5716

Sept 2005 Panel Member

68. Ins. Teknologi Kulim Dip. Design Eng. (Mekanikal) March 2004

Panel Member

69. WIT College Dip. Mech Eng SM3037 May 2004 Panel Member

70. GMI Dip. Prod. Tech KA5787 Dec 2004 Panel Member

71. UniKL -‐ MFI Dip Eng Tech (Welding) KN5139) May 2004 Panel Member

72. TPM Academy BS (Eng) Aug 2004 Panel Member

73. UNITEN PhD in Engineering 2002 Panel

74. Kolej Tafe Seremban Dip. Electro-‐Mechanical Eng 2002 Panel

75. Inst Teknology Jaya/Univ. of Wales College Newport

B.Eng (Hons) Integrated Manufacturing Tech

2002 Panel

76. L&G Twintech Ins. Of Technology

Dip. Mechanical Eng 2000 Panel

/80

g. Professional Affiliation

No Detail

Designation Duration

1. Board of Engineers Malaysia (BEM) Registered Engineer 13986 Since 1989 2. American Society of Mechanical

Engineers (ASME) Member Since 2001

3. American Foundry Society (AFS) Member Since 2016 4. Int. Association of Advanced

Materials (IAAM) Member Since 2016

5. The Institution of Engineers (IEM) Graduate Member M15210 Since 1992 6. New York Academy of Science Member Since 2001 7. Persatuan Pegawai Akademik Member 1995-‐Present 8. Malaysian Society for Engineering

and Technology (MySET) Member (01586) Since 2017

h. Public Services

No.

Organisation

Date

1 Chairman Rukun Tetangga Taman Desa Serdang

1998-‐2005

2 Committee member od Masjid Al-‐Takwa Taman Desa Serdang

2002-‐2010

3 Deputy Chairman PIBG SAM Bt 10 Cheras

2009-‐2013

4 Chairman PIBG SMISTA MAIWP

2013-‐2017

5 Board Committee Member Islamic Schools Kuala Lumpur and Labuan MAIWP

2013-‐2017

6 Exco member Persekutuan Gasing Malaysia

2013-‐2019

I. Student Activities (Selected) There were many activities held and conducted in the capacity as the Deputy Dean of Faculty of Engineering, Deputy Dean of School of Graduate Studies, Deputy Director, Head of Department, Coordinator and Lecturer. Some are listed as follows:

No Type Position Year 1 Shell Ecomarathon Mechanical Advisor 2012 2 Eimarace 2010 Mechanical Advisor 2011 3 Eimarce 2009 Mechanical Advisor 2010 4 Formula Varsity Mechanical Advisor 2009 5 Robocon 2008 Mechanical Advisor 2008 6 Robocon 2007 Mechanical Advisor 2008 7 BE (Mechanical and Manufacturing) Academic Advisor 1992 – to date

J. Referee

/80

Prof. Ir. Dr. Sapuan bin Salit Department of Mechanical and Manufacturing Engineering Faculty of Engineering UPM [email protected] Prof. Datin Dr. Napsiah Ismail Department of Mechanical and Manufacturing Engineering Faculty of Engineering [email protected] Prof. Ir. Dr. Desa Ahmad Department of Biological and Agricultural Engineering Faculty of Engineering UPM [email protected]

/80

DECLARATION I hereby certify that the information above is true.

Signature: ______________________________________

PROF. DR. SHAMSUDDIN SULAIMAN Official Stamp:

Date: 14/11/2019

professor!shamsuddin!bin!sulaiman.phd!€¦ · page3/80% ks%353% material%engineering% upm% ks%373%...

Documents