profile din tabla engl
TRANSCRIPT
-
8/2/2019 Profile Din Tabla Engl
1/34
-
8/2/2019 Profile Din Tabla Engl
2/34
1List of contents
Impressum
This catalogue was designed, illustrated and
produced by: hardtdesign, Saarbrcken
Litho: Mediakreativwerk
All content subject to technical development
No liability can be accepted for any errors
contained in this catalogue
In General 2
Safety tested 3
STEPBLOC 4/5
STEPCLAIR 6/7
STEPHUIT 8/9
ADERSTEP 10/11
AIRSTEP 12/13
BOSTEP 14
STEPLARM 15
STEP PLUS 16/17
FORMSTEP 18
Special shapes 19
Fixing elements 20
Ladder rung profile 21
Load tables 22/25
Stairtreads 26/27
COUVRAZED 28/29
Example applications 30
Production locations 31
Your enquiry 32
-
8/2/2019 Profile Din Tabla Engl
3/34
Lubricating materials inindustry often have an undesirable
side effect: They can easily turn
the safest of environment into
dangerous ones.
This problem is well under-
stood by civil and structural
engineers, and by the automotive
industries. It is a particular problem
for timber scaffolding boards.
In the same way certain
safety-relevant equipment such as
high-water walkways or escape
stairways can under adverse cir-
cumstances themselves turn into a
source of danger.
We have several solutions
that help to counteract these
issues.
2 In general
-
8/2/2019 Profile Din Tabla Engl
4/34
Safety
tested
3
As an experienced manu-facturer of access and egress
systems, such as walkways gra-
tings and escape stairs and hand-
rails, we always keep ourselves up
to date with the current regulations
and standards governing the con-
struction of our products. Copies
of our test reports are available on
request.
BG-(BIA-) Tested and certified
The Berufsgenossenschaftliche
Institut fr Arbeitssicherheit (BIA)
(The Professional Trade Asso-
ciation Institute for Safety at Work)
tests the slip-resistancy and the
deflection of the planks.
Test report by MFPA (Material
Testing Authority for Fire-Proof
Planks):
This serves as the basis for the
general building supervision aut-
hority approvals for non-combu-
stible and inflammable building
materials.
Test report by RAL (German
Institute for Quality Assessment and
Certification Quality Assessment):
The quality and testing regulations
are valid for structural calculations
and the manufacture of metal pro-
file planks according to QualityAssessment RAL-GZ 639.
-
8/2/2019 Profile Din Tabla Engl
5/34
4
-
8/2/2019 Profile Din Tabla Engl
6/34
h
B
10,2
30
13
10
,2
13
58 46
30
14
b
Slip-resistant surfacewith both upward and
raised perforations
The upwards-perforated
surface with its non-slip design
provides a surface which gives
superior gripping properties which
offers the highest safety.
The oval-shaped openingspermit liquids to run off easily.
Meiser STEPBLOC is avai-
lable in different heights and
widths, and can be tailored to suit
your individual requirements.
5STEPBLOC
Specifications
Standard Dimensions: Dimensions of up to 4.020 mm are included in our standard range.
Special sizes: Planks can be supplied up to 6.000 mm on request.
(Please note: length of plank is calculated in multiples of 30 mm)
Special sizes: upon request.
Classification group for
slip-resisting property: R11 in steel, R13 in aluminium
Classification group fordisplaced area: V10
Material type
and thickness
Raw steel StW 22
hot galvanized,
2, 2.5 mm
Steel
sendzimir galvanized,
Z 275, 2 mm
Aluminium AIMg3,
3 mm
Stainless steel
( 1.4301) V2A, 2 mm
Standard dimensions in mm, Special sizes upon request
30 40 50 75
15 15 30 30
13 to 17 18 to 30 18 to 30 27 to 31
Width 120/124
180/182
240
300/298
360/356
420/414
480/475
Height h
A
B
b
-
8/2/2019 Profile Din Tabla Engl
7/34
6
-
8/2/2019 Profile Din Tabla Engl
8/34
h
B
b
45 18 4,510,2
45
45
13
10
,2
13
Slip-resistant surfacewith both upward and
downward facing holes
The downward-perforated
holes have a diameter of 18 mm,
whilst the upward-perforated holes
have a diameter of 4.5mm.
The interplay between the
prominent and recessed openingsprovides a secure foothold and at
the same time allows liquids to
drain freely off the surface.
The advantage of this
apparently less aggressive design
is demonstrated in situations in
which wheeled trolleys have to be
pushed across the surface.
STEPCLAIR 7
Material type
and thickness
Raw steel StW 22
hot galvanized,
2 mm
Steel
sendzimir galvanized,
Z 275, 2 mm
Aluminium AIMg3,
3 mm
Stainless steel
(1.4301), V2A, 2 mm
Standard dimensions in mm, Special sizes upon request
30 50 75 100
15 30 30 30
13 to 17 18 to 30 27 to 31 27 to 34
Width 182
240
298
330
356
414
475
Height h
A
B
b
Specifications
Standard Dimensions: Dimensions of up to 4.020 mm are included in our standard range.
Special sizes: Planks can be supplied up to 6.030 mm on request.
(Please note: length of plank is calculated in multiples of 45 mm)
Special sizes: upon request.
-
8/2/2019 Profile Din Tabla Engl
9/34
8
-
8/2/2019 Profile Din Tabla Engl
10/34
45
45
8 4,510,2
45
13
10
,2
13
h
B
b
9STEPHUIT
MFPA-tested and
certified
Slip-resistant surfacewith both upward and
downward facing holes
The downward-perforated
holes have a diameter of 8 mm,
whilst the upward-perforated holes
have a diameter of 4.5 mm.
Using only the 4.5mm upward
facing holes gives the plank a
greater fire suppressing quality.
Suitable for use in power plants
where combustible fuels are in use.
Planks are closed in front.
Material type
and thickness
Raw steel StW 22
hot galvanized,
2 mm
Steel
sendzimir galvanized,
Z 275, 2 mm
Aluminium AIMg3,
3 mm
Stainless steel
(1.4301) V2A, 2 mm
Standard dimensions in mm, Special sizes upon request
30 50 75 100
15 30 30 30
13 to 17 18 to 30 27 to 31 27 to 34
Width 182
240
298
330
356
414
475
Height h
A
B
b
Specifications
Standard Dimensions: Dimensions of up to 4.005 mm are included in our standard range.
Special sizes: Planks can be supplied up to 6.030 mm on request.
(Please note: length of plank is calculated in multiples of 45 mm)
Special sizes: upon request.
Special Design
Y
H
B
L
X
454,5 8
-
8/2/2019 Profile Din Tabla Engl
11/34
10
-
8/2/2019 Profile Din Tabla Engl
12/34
h
B
b
45
10
,2
13
45
45
13
10,2 4,5
11
Slip-resistant surfacewith upward facing
4.5 mm holes
The aesthetic surface struc-
ture of ADERSTEP makes it suita-
ble for adapting into the architec-
ture of contemporary buildings,
and equally at home in industrial
applications.
ADERSTEP
Material type
and thickness
Raw steel StW 22
hot galvanized,
2 mm
Steel
sendzimir galvanized,
Z 275, 2 mm
Aluminium AIMg3,
3 mm
Stainless steel
(1.4301) V2A, 2 mm
Standard dimensions in mm, Special sizes upon request
30 50 75 100
15 30 30 30
13 to 17 18 to 30 27 to 31 27 to 34
Width 182
240
298
330
356
414
475
Height h
A
B
b
Specifications
Standard Dimensions: Dimensions of up to 4.005 mm are included in our standard range.
Special sizes: Planks can be supplied up to 6.030 mm on request.
(Please note: length of plank is calculated in multiples of 45 mm)
Special sizes: upon request.
-
8/2/2019 Profile Din Tabla Engl
13/34
12
-
8/2/2019 Profile Din Tabla Engl
14/34
1345
45
10,2
13
10
,2
18
45
13
h
B
b
13AIRSTEP
Smooth surface withdownward-facing holes
The perforated holes have a
diameter of 18 mm.
Exceptionally useful for flo-
ors on which rollers or small con-
tainers have to be moved about,
Airsteps construction also makes it
suitable in areas were drainage is
important.
Standard dimensions in mm, Special sizes upon request Material type
and thickness
Raw steel StW 22
hot galvanized,
2 mm
Steel
sendzimir galvanized,
Z 275, 2 mm
Aluminium AIMg3,
3 mm
Stainless steel
(1.4301) V2A, 2 mm
30 50 75 100
15 30 30 30
13 to 17 18 to 30 27 to 31 27 to 34
Width 182
240
298
330
356
414
475
Height h
A
B
b
Specifications
Standard Dimensions: Dimensions of up to 4.005 mm are included in our standard range.
Special sizes: Planks can be supplied up to 6.030 mm on request.
(Please note: length of plank is calculated in multiples of 45 mm)
Special sizes: upon request.
-
8/2/2019 Profile Din Tabla Engl
15/34
60
10
,2
13
10,2
13
19,33 3x3 12x12
20
h
B
b
14
Closed pyramidpattern planking.
The closed surface makes
it suitable to protect lower areas
from falling objects or to keep
lower surfaces free from dirt
particles. Equally it can be used in
areas were the view from below is
not desirable.
BOSTEP
Standard dimensions in mm, Special sizes upon requestMaterial type
and thickness
Raw steel StW 22
hot galvanized,
2, 2.5, 3 mm
Steel sendzimir
galvanized, Z 275,
2, 2.5, 3 mm
Aluminium AIMg3,
3 mm
Stainless steel(1.4301) V2A, 2 mm
50 75 100
30 30 30
18 to 30 27 to 31 27 to 34
Width 182
240
298
356
414475
Height h
A
B
b
Specifications
Standard Dimensions:
Dimensions of up to 4.020 mm are
included in our standard range.
Special sizes: Planks can be
supplied up to 6.000 mm
on request.
Special sizes: upon request
-
8/2/2019 Profile Din Tabla Engl
16/34
60
10,2
13
58
60
10
,2
13
h
B
b
8
46
15
Closed corrugatedsurface, the pattern is
similar in form to that of
chequer plate.
This style of plank has a
proven track record in both the
public area for pedestrian traffic
and also industrial and commercial
use.
STEPLARM
Standard dimensions in mm, Special sizes upon request Material type
and thickness
Raw steel StW 22
hot galvanized,
2 mm
Steel
sendzimir galvanized,
Z 275, 2 mm
Aluminium AIMg3,
3 mm
Stainless steel(1.4301) V2A, 2 mm
50 75 100
30 30 30
18 to 30 27 to 31 27 to 34
Width 182
240
298
356
414475
Height h
A
B
b
Specifications
Standard Dimensions:
Dimensions of up to 4.020 mm are
included in our standard range.
Special sizes: Planks can be
supplied up to 6.000 mm
on request.
Special sizes: upon request
-
8/2/2019 Profile Din Tabla Engl
17/34
16
-
8/2/2019 Profile Din Tabla Engl
18/34
4,510,2
50
13
10
,2
13
50
19
h
B
b
17STEP PLUS
Slip-resistant surfacewith upward facing
4.5 mm holes, and
downward facing
longitudinal slots.
Due to its construction
STEP PLUS is a robust anti-slip
plank which makes it particulary
suitable for industrial projects,such as drainage culverts.
Standard dimensions in mm
30 50 75 100
15 30 30 30
9 to 19 14 to 28 14 to 32 18 to 36
Width 125
200
250
300
Height h
A
B
b
Material type
and thickness
Raw steel StW 22hot galvanized,2 mm
Steelsendzimir galvanized,Z 275, 2 mm
Stainless steel(1.4301) V2A, 2 mm
Specifications
Standard Dimensions: Dimensions of up to 4.020 mm are included in our standard range.
(Please note: length of plank is calculated in multiples of 50 mm)
-
8/2/2019 Profile Din Tabla Engl
19/34
40
+0
-1,5
+0-2B
30
H=75
40
40
12
9
20/25/37,5
H=50
H=40
ca. 25s
H
18 FORMSTEP
Specifications
Classification groups for
slip retarding:
in galvanized steel: R11
in aluminium: R12
in stainless steel : V2A (1.4301) R11
Classification group for the
displaced area: V10
Specifications
Standard Dimensions: Lengths of 6.000 mm can be supplied ex stock.
Standard dimensions in mm, Special sizes upon request
We can also produce custom types. Just give as a call.
40 50 75 100
20 25 37,5 50
ca.25 ca.25 ca.25 ca.25
Width 120
180
240300
360
420
Height h
b
Material type
and thickness
Raw steel StW 222, 2.5, 3 mm
Aluminium AIMg3,3 mm
Stainless steel(1.4301) V2A, 2 mm
Height of perforations
Edging
-
8/2/2019 Profile Din Tabla Engl
20/34
3
1 2
4
5 6
19Special shapesto FORMSTEP
Incomparable and uniquesurface structures offer the indu-
strial and architectural user many
different options.
The comprehensive pro-
duct range opens the way to a
multiplicity of applications.
All designs have been tested
for deflection and slip-resistancy.
Copies of our test reports are avai-
lable on request.
1 FORMSTEP 1
2 FORMSTEP 2
3 FORMSTEP 3
4 FORMSTEP 4
5 FORMSTEP 5
6 FORMSTEP 6
-
8/2/2019 Profile Din Tabla Engl
21/34
20
Fast Fixing
Double clamp FixingSuitable for front connecting and for
the centre-support of the profile planks
(Galvanized finish, suitable for plank
heights of 30, 40, 50, 75 and 100 mm)
1) DiscCast steel unit, with countersunk hole
2) Olive1Upper part clip with countersunk hole
Available in electrolitically-galvanized
cast iron or heavy duty plastic
3) Olive 2Upper part clip, with recessed hole
Available in electrolitically-galvanized
cast iron
Support ClipUsed for installation where additional
support is required. (Clip comes
assembled with an M8x...DIN 965
(length varies according to plankheight) screw to suit plank height, avai-
lable in steel, hot dip galvanized and
stainless steel, for plank heights of 40,
50 and 75 mm)
ConnectorsUsed to connect the metal planks
together laterally (Galvanized finish,
available for plank heights of 40, 50 and
75 mm)
End Connectorsused as end connection, or in the
assembly of stairtreads
(Hot dip galvanized finish and stainless
steel, suitable for plank heights of 40
and 75 mm, assembly comes with 4
screws M8x16, washers and security
nuts)
Hook FixingUsed to install onto angles and chan-
nels (Unit comes with top clip and
threaded hook bolt assembly, available
in steel, hot dip galvanized)
Joint ConnectorSuitable for front connecting
(Hot dip galvanized finish, suitable for
plank heights of 40, 50, 75 and 100 mm
assembly comes with 4 screws M8x16,
washers and security nuts)
Universal FixingMostly used for closed planks
Fixing for STEP PLUS Fixing with olives
Fixing
elements
Here you can see a selec-tion of the fixing elements that can
be used with our products.
(other types may be available upon
request)
1
2
3
-
8/2/2019 Profile Din Tabla Engl
22/34
30
7,5
6,5
2
25
27
300
12,530
25
6,
5
12,5
310
327
30
6,5
35
7,5
13
35
13
20 30 20
300
325
334
34
452
495
50
26
30 30
49
13
6,
5
40
~11
50
7,5
13 6,5
Ladder
rung profiles21
Most ladder rungs have asimilar hole pattern. The upward-
pressed perforations provide a
slip-resistant tread, even in areas
where there is an increased risk of
oil and contamination.
The highest level of tread
safety is achieved with the double-
rowed and offset perforations
which are carried right through to
the edges of the planks.
Standard dimensions, Plate thickness 2 mm
Variant 1 300 x 25 x 30 mm with notching
Variant 2 300 x 35 x 30 mm with notching
Variant 3 452 x 50 x 40 mm with notching
1
2
3
Material
Steel StW 22
Aluminium
Stainless steel
V2A 1.4301
Specifications
The lengths refer to the internal
dimension of the notching.
All 3 variants can also be obtained in
2000 mm without notching.
-
8/2/2019 Profile Din Tabla Engl
23/34
22 Load tables
The values shown are calculated according
to their maximum permitted carrying capaci-
ty. The uniformly-distributed load is a load
which allows a maximum deflection of l/200
(l is the height of the plank). Adjacent plankheight at joints must not exceed 4mm in eit-
her direction.
It is assumed that the loading surface is
effective across the whole width of the plank
B. If this is not the case then the point load
values must not be exceeded
(see Tables).
Point loads are the loads which most fre-
quently arise. The load is thereby effective in
the centre of the plank.
a1 is the length of the tread in the
longitudinal plank direction.
a2 is the width of the tread in the
longitudinal plank direction.
bm is the jointly-carrying width in thelongitudinal plank direction.
L
H
B
F
a1
B
F
a2bm
L
H
B
F
200
Height 50 mm
Examples of uniformly-distributed load (kN/m2)
Material: Steel StW 22, sheet metal thickness: 2 mm
STEPBLOC
Height 30 mm
Height 75 mm
Height 40 mm
Width Support width
750 1000 1250 1500 1750 2000Uniformly-distributed loads (kN/m2)
124 mm 29,11 16,18 10,20 6,94 4,98 3,71182 mm 20,59 11,33 7,05 4,72 3,32 2,41240 mm 15,90 8,64 5,28 3,46 2,36 1,64298 mm 12,90 6,90 4,13 2,62 1,71 1,12356 mm 10,85 5,69 3,31 2,01 1,23 0,72414 mm 9,28 4,76 2,66 1,52 0,83 0,39475 mm 8,00 3,98 2,12 1,11 0,50 0,10
Individual load (kN), all widths
1,37 1,03 0,82 0,69 0,59 0,52
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
124 mm 66,43 37,12 23,56 16,19 11,75 8,87182 mm 47,06 26,18 16,51 11,26 8,09 6,04240 mm 36,39 20,12 12,59 8,50 6,03 4,43298 mm 29,61 16,25 10,07 6,71 4,69 3,37356 mm 24,92 13,56 8,31 5,45 3,73 2,61414 mm 21,42 11,54 6,97 4,48 2,99 2,01475 mm 18,58 9,88 5,86 3,67 2,35 1,50
Individual load (kN), all widths
3,11 2,34 1,87 1,56 1,33 1,17
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
124 mm 141,04 79,03 50,33 34,74 25,34 19,24182 mm 100,52 56,18 35,66 24,51 17,79 13,43240 mm 78,21 43,58 27,55 18,84 13,59 10,19298 mm 63,97 35,52 22,35 15,19 10,88 8,08356 mm 54,07 29,89 18,70 12,63 8,96 6,58414 mm 46,75 25,72 15,99 10,70 7,52 5,45475 mm 40,80 22,32 13,76 9,12 6,31 4,50
Individual load (kN), all widths
6,59 4,94 3,95 3,30 2,82 2,47
Uniformly-distributed load
Individual load
Point load
Width Support width750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
124 mm 49,47 27,65 17,55 12,06 8,76 6,61182 mm 32,55 18,16 11,50 7,88 5,70 4,29240 mm 26,00 14,49 9,16 6,27 4,52 3,39298 mm 22,04 12,27 7,75 5,30 3,82 2,86356 mm 18,33 10,19 6,43 4,38 3,15 2,35414 mm 15,80 8,77 5,52 3,75 2,68 1,99475 mm 13,83 7,67 4,82 3,27 2,33 1,72
Individual load (kN), all widths
2,24 1,68 1,35 1,12 0,96 0,84
-
8/2/2019 Profile Din Tabla Engl
24/34
23Load tablesExamples of uniformly-distributed load (kN/m2)Material: Steel StW 22, sheet metal thickness: 2 mm
STEPCLAIR, STEPHUIT, ADERSTEP, AIRSTEP, BOSTEP, STEPLARM
Height 30 mm
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
182 mm 17,48 9,70 6,09 4,14 2,96 2,19
240 mm 13,39 7,41 4,64 3,13 2,23 1,64
298 mm 10,84 5,98 3,73 2,51 1,77 1,29
330 mm 9,85 5,42 3,37 2,26 1,59 1,15
356 mm 9,13 5,02 3,12 2,09 1,47 1,06
414 mm 7,88 4,32 2,67 1,78 1,24 0,89
475 mm 6,87 3,75 2,31 1,52 1,05 0,75
Individual load (kN), all widths
1,21 0,91 0,73 0,61 0,52 0,46
Height 50 mm
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
182 mm 45,27 25,31 16,06 11,04 8,02 6,05
240 mm 35,00 19,54 12,39 8,50 6,15 4,63
298 mm 28,54 15,92 10,08 6,90 4,99 3,75
330 mm 25,94 14,46 9,15 6,26 4,52 3,39
356 mm 24,10 13,43 8,49 5,80 4,18 3,13
414 mm 20,88 11,62 7,33 5,01 3,60 2,69
475 mm 18,26 10,16 6,40 4,36 3,13 2,34
Individual load (kN), all widths
3,11 2,34 1,87 1,56 1,33 1,17
Height 75 mm
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
182 mm 101,86 57,10 36,38 25,13 18,34 13,94
240 mm 79,32 44,45 28,31 19,54 14,25 10,82
298 mm 65,03 36,42 23,19 15,99 11,66 8,84
330 mm 59,15 33,12 21,08 14,53 10,59 8,03
356 mm 55,09 30,84 19,62 13,52 9,84 7,46
414 mm 47,85 26,78 17,03 11,73 8,53 6,46
475 mm 42,02 23,50 14,94 10,28 7,47 5,65
Individual load (kN), all widths
6,98 5,24 4,19 3,49 2,99 2,62
Height 100 mm
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
182 mm 154,43 86,64 55,27 38,22 27,95 21,28
240 mm 120,85 67,79 43,23 29,89 21,84 16,62
298 mm 99,40 55,74 35,53 24,56 17,94 13,64
330 mm 90,62 50,81 32,38 22,37 16,34 12,42
356 mm 84,52 47,39 30,20 20,86 15,23 11,57
414 mm 73,58 41,24 26,27 18,14 13,24 10,06
475 mm 64,75 36,28 23,10 15,94 11,63 8,83
Individual load (kN), all widths
10,57 7,93 6,34 5,29 4,53 3,97
Point load max. point load FP in [kN]
Tread area 200 x 200 mm
STEPBLOC
Material: Steel STW 22
Point load max. point load FP in [kN]
Tread area 200 x 200 mm
Plank width B Plate thickness
[mm] 2,0 2,5 3,0
124 13,53 17,03 21,28
182 9,02 11,35 14,19
240 6,77 8,51 10,64
298 4,74 5,96 7,45
356 3,95 4,97 6,21
414 3,38 4,26 5,32
475 2,96 3,72 4,65
STEPCLAIR , STEPHUIT, ADERSTEP,
AIRSTEP, BOSTEP, STEPLARM
Material: Steel STW 22
Plank width B Plate thickness
[mm] 2,0 2,5 3,0
182 1,85 2,85 4,14
240 1,38 2,12 3,07
298 1,13 1,74 2,53
330 1,06 1,63 2,36
356 0,79 1,22 1,76
414 0,54 0,84 1,21
475 0,36 0,55 0,79
Area cannot be walked on
-
8/2/2019 Profile Din Tabla Engl
25/34
24 Load tables
Height 30 mm
Example of permitted uniformly-distributed load (kN/m2)
Material: Steel StW 22, plate thickness: 2 mm
STEP PLUS
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
125 mm 20,51 11,38 7,16 4,86 3,48 2,58
200 mm 14,57 8,07 5,06 3,42 2,43 1,79
250 mm 12,67 7,00 4,38 2,95 2,10 1,54
300 mm 11,35 6,27 3,91 2,64 1,86 1,36
Individual load (kN), all widths
0,98 0,73 0,59 0,49 0,42 0,37
Height 50 mm
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
125 mm 54,77 30,62 19,44 13,37 9,71 7,33
200 mm 35,54 19,84 12,57 8,62 6,24 4,70
250 mm 29,03 16,19 10,24 7,02 5,07 3,80
300 mm 24,65 13,74 8,69 5,94 4,29 3,21
Individual load (kN), all widths
2,59 1,94 1,55 1,29 1,11 0,97
Height 75 mm
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
125 mm 107,77 60,40 38,47 26,56 19,38 14,71200 mm 69,32 38,82 24,70 17,03 12,40 9,40
250 mm 56,12 31,41 19,97 13,76 10,01 7,58
300 mm 47,27 26,44 16,80 11,56 8,41 6,36
Individual load (kN), all widths
5,08 3,81 3,05 2,54 2,18 1,90
Height 100 mm
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
125 mm 189,01 106,05 67,65 46,80 34,22 26,06
200 mm 124,79 69,99 44,63 30,85 22,55 17,15250 mm 100,91 56,56 36,03 24,88 18,16 13,80
300 mm 84,83 47,55 30,30 20,92 15,27 11,60
Individual load (kN), all widths
8,89 6,67 5,33 4,44 3,81 3,33
Point load max. point load FP in [kN]
Tread area 200 x 200 mm
Plank width B Plate thickness
[mm] 2,0 2,5 3,0
125 14,68 17,52 22,46
200 8,81 10,51 13,48
250 6,52 7,79 9,98
300 4,89 5,84 7,49
STEP PLUS
Material: Steel STW 22
-
8/2/2019 Profile Din Tabla Engl
26/34
25Load tablesExamples of uniformly-distributed load (kN/m2)Material: Steel StW 22, sheet metal thickness: 2 mm
FORMSTEP
Height 40 mm
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
120 mm 53,94 30,15 19,13 13,15 9,54 7,20
180 mm 37,06 20,69 13,11 8,99 6,51 4,90
240 mm 28,24 15,74 9,96 6,82 4,92 3,69
300 mm 22,76 12,67 8,00 5,46 3,93 2,93
360 mm 19,16 10,66 6,72 4,58 3,29 2,45
420 mm 16,51 9,16 5,76 3,91 2,80 2,08
480 mm 14,40 7,98 5,01 3,40 2,42 1,79
Individual load (kN), all widths
2,45 1,84 1,47 1,22 1,05 0,92
Height 50 mm
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
120 mm 73,03 40,87 25,99 17,90 13,03 9,86
180 mm 50,37 28,16 17,88 12,30 8,93 6,75
240 mm 38,54 21,53 13,65 9,37 6,79 5,12
300 mm 31,14 17,38 11,00 7,54 5,46 4,10
360 mm 26,22 14,62 9,25 6,33 4,57 3,43
420 mm 22,63 12,61 7,97 5,45 3,93 2,94
480 mm 19,77 11,00 6,93 4,73 3,40 2,54
Individual load (kN), all widths
3,31 2,48 1,98 1,65 1,42 1,24
Height 75 mm
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
120 mm 128,57 72,09 45,95 31,75 23,18 17,63
180 mm 89,60 50,22 31,99 22,09 16,12 12,24
240 mm 69,02 38,66 24,61 16,98 12,38 9,39
300 mm 56,09 31,40 19,98 13,77 10,03 7,60
360 mm 47,36 26,50 16,84 11,60 8,43 6,38
420 mm 40,98 22,92 14,56 10,02 7,28 5,51
480 mm 35,93 20,08 12,75 8,76 6,36 4,80
Individual load (kN), all widths
5,81 4,36 3,49 2,90 2,49 2,18
Height 100 mm
Width Support width
750 1000 1250 1500 1750 2000
Uniformly-distributed loads (kN/m2)
120 mm 194,61 109,20 69,66 48,19 35,24 26,83
180 mm 136,63 76,64 48,87 33,79 24,70 18,80
240 mm 105,71 59,28 37,79 26,11 19,07 14,51
300 mm 86,33 48,39 30,84 21,30 15,55 11,82
360 mm 73,08 40,95 26,08 18,01 13,14 9,97
420 mm 63,40 35,52 22,62 15,61 11,38 8,64
480 mm 55,80 31,25 19,89 13,72 10,00 7,58
Individual load (kN), all widths
8,79 6,59 5,27 4,39 3,77 3,29
Point load max. point load FP in [kN]
Tread area 200 x 200 mm
Area cannot be walked on
FORMSTEPMaterial: Steel STW 22
Plank width B Plate thickness
[mm] 2,0 2,5 3,0
120 2,81 4,33 6,27
180 1,87 2,88 4,18
240 1,38 2,12 3,07
300 1,21 1,85 2,69
360 0,93 1,43 2,07
420 0,70 1,08 1,57
480 0,51 0,78 1,13
-
8/2/2019 Profile Din Tabla Engl
27/34
H 42 2
7
52,5 13
60,513 x 30
L
l
26
All patterns can also beobtained in the form of steps:
STEP PLUS
STEPCLAIR
STEPHUIT
ADERSTEP
AIRSTEP
BOSTEP
Mixed 3Z
Standard dimensions in mm:
STEPCLAIR, STEPHUIT, ADERSTEP, AIRSTEP, BOSTEP Material /
Sheet metal thickness
Raw steel StW 22
hot galvanized,
2 mm
Steel
sendzimir galvanized,
Z 275, 2 mm
Aluminium AIMg3,
3 mm
Stainless steel
(1.4301) V2A, 2 mm
30 50 75
Width 173
195
218
240
263
285
308
330
353
375
Height h
b
Specifications
Lenghts upon request,
Special sizes upon request
STEP PLUS can only be obtained in
widths of 200, 250 und 300 mm,
STEP PLUS
is not available inAluminium.
-
8/2/2019 Profile Din Tabla Engl
28/34
27Stairtreads
Bore35 mm15mm
70mm
55mm
14 mm
STEPBLOC and FORMSTEP models are supplied
with standard end plates.
Standard dimensions in mm for:
STEPBLOC and FORMSTEPMaterials
Raw steel StW 22,
Aluminium AlMg3
Stainless steelV2A (1.4301)
STEPBLOC
FORMSTEP
Stairtreads for spiral
staircases are available in all
versions of FORMSTEP.
Material thickness 2,0 mm 2,5 mm 3,0 mm
Width 240
270
300
330
Specifications
Mill lenghts of
600 / 800 / 1000 / 1200 mm
endplate height 70 mm
-
8/2/2019 Profile Din Tabla Engl
29/34
28
Couvrazed planksas a safety system
for walking on roofs.
-
8/2/2019 Profile Din Tabla Engl
30/34
510
18
55,5
3
30
COUVRAZED slip-resistantmetal profile planks have been
developed by MEISER for areas that
require increased safety, especially
for working on dangerous and
unstable roofs. With their coated
aluminium bases these planks
guarantee slip reduction by up to
40%.
Even the most inexperien-
ced can mount these planks quick-
ly and safely.
Another advantage is the
weight: They are ultralight weig-
hing a maximum of 15 kg per 3150
mm plank.
Have any questions? Please
ask us.
COUVRAZED 29
Specifications
Material thickness: 3 mm
Width: 510 mm
Height: 55.50 mm
Length: 3150 mm
Weight: 15.3 kg
The ends are provided with a 30 mm
edge for strenghtening purposes
-
8/2/2019 Profile Din Tabla Engl
31/34
30 Applicational
areas
Meiser Planks are exceptio-nally adaptable and easy to lay.
They are suited to a wide range of
applications and continue to provi-
de a safe working environment
even when in contact with materi-
als such as grease and oil:
In building and civil
engineering,
In systems and automotive
manufacturing as floor and
platform coverings,
In scaffold construction
(Walkway Boards),
In public pedestrian traffic
zones as safety planks,
e.g. as high water walkways
In stairway construction
Meiser metal profile planks can
also be used as stairtreads and
platform coverings.
-
8/2/2019 Profile Din Tabla Engl
32/34
Oelsnitz
Limbach
31Production
locations
The international presenceof our trademark world-wide
stands for fundamental know-how
and experience. In 5 production
plants world-wide, we insure inno-
vation and continuous improve-
ment of our grating products,
Planking and both straight and spi-
ral staircases.
The name of Meiser stands
for high quality which is wholly
aimed at our customers.
Our trained Customer
Service Department will give you
advice during the planning of your
project, together with all the
necessary structural calculations,
through to the arranging and sche-
duling of site measurements and
finally the installation on site.
We would like you as our
customers to benefit from our
years of know-how and from our
highly trained service advisers.
Internet: www.meiser.de
Oelsnitz
Limbach
-
8/2/2019 Profile Din Tabla Engl
33/34
32 Your enquiry
Should you wish us to provide you with a quotation, simply fill in thisform and either fax it or post it to our factory, and we will get back to you with
our offer.
Your firm
Contact person
Address
Phone
Fax E-mail
Date
Area of application
Number
Size
Load
Support width
Distributor
Material
Steel StW 22
Sendzimir galvanized Z 275
Stainless steel (1.4301)
Aluminium AIMg3
Type of metal profile plank
STEPBLOC
STEPCLAIR
STEPHUIT
ADERSTEP
AIRSTEP
BOSTEP
STEPLARM
STEP PLUS
FORMSTEP
Special Applications
COUVRAZED
Fixing and
safety elements
Disc
Olive 1
Olive 2
Join connector
Double clamp Fixing
Connectors
End connectors
Universal Fixing
Hook Fixing
Support-Clip
Fixing for STEP PLUS
Fixing with olives
Fast Fixing
Stairtreads
STEPCLAIR
STEPHUIT
ADERSTEP
AIRSTEP
BOSTEP
Mixed 3Z
STEP PLUS
STEPBLOC
FORMSTEP 0796/05.
04
Blechprofilroste
englisch/neutral
-
8/2/2019 Profile Din Tabla Engl
34/34