Project: Ship Wheel Page 1 of 18

SHIP WHEEL

This document contains the instructions for making a Rudder, which is a beautiful decoration for any wall. For example, it can be the wall of your living room, restaurant, raft or any other place you choose.

For making a rudder, you should purchase some dry wood with nice texture, like oak, cherry, beech, ash or walnut. For making the Circle (item 4), Front Cover (item 5) and Back Cover (item 6) you can use a bit more pale type of wood or some soft alloy (copper and aluminum). Rivets should be made of some soft metal material, so you could easily assemble the project.

NOTE: The measurements within this text and 2D documentation are given both in millimeters and inches (in brackets). This website is based on ISO measurement unit system, which is the international standard. I apologize to the people who use other measurement units; but I believe that measurements given in millimeters and inches should be adequate for everyone who would like to build this project. Besides that, on today’s Internet it is easy to purchase the ruler containing all the measurement units and overcome the difficulties of any kind.

Project: Ship Wheel Page 2 of 18

PARTS LIST

Project: Ship Wheel Page 3 of 18

2D Documentation

Project: Ship Wheel Page 4 of 18

Project: Ship Wheel Page 5 of 18

Project: Ship Wheel Page 6 of 18

Project: Ship Wheel Page 7 of 18

Project: Ship Wheel Page 8 of 18

Project: Ship Wheel Page 9 of 18

Project: Ship Wheel Page 10 of 18

Project: Ship Wheel Page 11 of 18

Project: Ship Wheel Page 12 of 18

Assemblage Instruction

Make the components as given on pictures.

1. Handle (item 1), Arc (item 2) and Pins (item 9; D10 x 80mm) join together with wood glue as shown on the picture. This way you will make the first half of the rudder. Fasten the shaped form into the clamp and leave it to dry out.

Project: Ship Wheel Page 13 of 18 2. Repeat this procedure to form the second half of the rudder.

Project: Ship Wheel Page 14 of 18 3. When the glue on each formed half of the rudder is dry, join these two parts with glue.

Project: Ship Wheel Page 15 of 18 4. Put the Holder (item 3) between Handles (item 1).

Project: Ship Wheel Page 16 of 18 5. Use rivets to set up the Front Cover (item 5) and Back Cover (item 6) to previously made construction.

Project: Ship Wheel Page 17 of 18

6. Use nails to fix the Circle (item 4) to previously made construction. If the Circle is made of some soft alloy (copper, aluminum), at first you have to drill the holes for nails. Repeat this process on the other half of the rudder.

Project: Ship Wheel Page 18 of 18