proposed expansion of bulk drugs and bulk drug...
TRANSCRIPT
1
PRE FEASIBILITY REPORT
For
PROPOSED EXPANSION OF BULK DRUGS AND BULK DRUG
INTERMEDIATES IN EXISTING UNIT
of
M/s. REINE LIFESCIENCE
PLOT NO. 5901, KANORIA CHEMICALS ROAD,
Nr. PAR DRUGS, GIDC ESTATE, ANKLESHWAR-393002,
DIST: BHARUCH (GUJ)
2
CONTENTS
Sr.
No.
Description Page
No.
1. Executive Summary 3
2. Introduction of the Project/Background information 14
3. Project Description 16
4. Site Analysis 21
5. Planning Brief 23
6. Proposed Infrastructure 24
7. Rehabilitation and resettlement (R & R) Plan 25
8. Project Schedule & Cost Estimates 26
9. Analysis of Proposal (Final Recommendations) 27
3
1.0 EXECUTIVE SUMMARY
1.1 Company Profile
M/s. Reine Lifescience proposes expansion of Bulk Drugs and Bulk drug intermediates in
existing unit located at Plot no. 5901, Kanoria Chemicals Road, Nr. Par Drugs, GIDC Estate,
Ankleshwar-393002, Dist: Bharuch, Gujarat.
1.2 Project Details
1.2.1 Products along with Production Capacity
Sr.
No.
NAME OF PRODUCTS CAS
No.
Existing
Quantity
Additional
Quantity
Total
Quantity
after
Proposed
expansion
(MT/Month)
Group-1
1 Pyrazinamide 98-96-4 3 -- 3
2 Phenyl Butazone 50-33-9 5
70
75
3 L2 OR (4R-cis)-1,1-
dimethylethyl-6-[2-[2-(4-
fluorophenyl)-3-phenyl-4
[(phenylamino)carbonyl]-
1H-pyrrol-1-yl]ethyl]-2,2-
dimethyl-1,3-dioxane-4-
acetate)
125971 -95-1
--
4 L3 OR [(4R-cis)-1,1-
dimethylethyl-6-[2-[2-(4-
fluorophenyl)-3-phenyl-4
[(phenylamino)carbonyl]-
1H-pyrrol-1-yl]ethyl]-2,2-
dimethyl-1,3-dioxane-4-
acetate]
125971 -95-1
5 Phenyl Butazone Calcium 70145 -60-7
6 Bumadizone Calcium 69365 -73-7
7 Metoprolol Tartrate 56392 -17-7
8 Metoprolol succinate 98418-47-41
9 Metoprolol base 37350 -58-6
10 Rosuvastatin Calcium 147098-20-2
11 Racemic 181289 -15-6
12 Sevelamer Carbonate 845273-93-0
13 Benzocaine 94 -09-7
14 Erdosteine 84611-23-4
4
15 Montelukast Sodium 151767-02-1
16 Cosevelam HCl 9064-91-9
17 Diclofenac Sodium 15307-79-6
18 Ambroxol HCl 23828-92-4
Group-2
19 Atovastain calcium 344423-98-9
--
20
20
20 Pregabalin 148553-50-8
21 RCMH 181289-33-8
22 Sevelamer HCl 152751-57-0
23 Phenylephrine HCl 61-76-7
24 Phenylephrine base 59-42-7
25 AAPA 943-80-6
Group-3
26 Polyallylamine HCl 71550-12-4 -- 40 40
27 Polyallylamine 30551-89-4 -- 40 40
28 Allylamine HCl 10017-11-5 -- 40 40
TOTAL 8 210 218
1.3 Raw Material Requirement
List of Raw Materials and Their Capacity
SR. NO. Name of Raw Materials CAPACITY
(MT/Month)
GROUP- 1
1. Phenyl Butazone
1. Hydrazobenzene 0.696
2. N-Butyl diethyl malonate 0.870
3. Sodium methoxide powder 0.239
4. Toluene 0.870
5. Activated carbon 0.017
6. Sodium hydrosulfite 0.043
7. Hyflow 0.043
8. Methanol 3.478
9. Acetic acid 0.565
2. Pyrazinamide
1. 2-Cyano pyrizine 1.11
2. Sodium hydroxide 0.44
3. Methanol 2.22
3. L2 OR (4R-cis)-1,1-dimethylethyl-6-[2-[2-(4-fluorophenyl)-3-phenyl-4
5
[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate)
1. (4R,6R)-tert-Butyl-6-cyanomethyl-2,2-dimethyl-1,3-
dioxane-4-acetate (CAS No. 125971-94-0) 0.58
2. Methanol/Toluene 18.58
3. Ammonia 0.82
4. Raney Nickel 0.23
5. Hydrogen Gas 0.01
6. Cyclohexane 5.29
7. Pivalic acid 0.05
8.
2-[2-(4-Fluorophenyl)-2-oxo-1-phenylethyl]-4-
methyl-3-oxo-N phenylpentanamide (M4) (CAS
No.125971-96-2) 0.88
9. Terbutylmethylether 0.52
10. Isopropyl alcohol 6.47
11. Sodium Hydroxide 0.29
12. Sodium chloride 0.29
13. Sodium bicarbonate 0.29
4.L3 OR [(4R-cis)-1,1-dimethylethyl-6-[2-[2-(4-fluorophenyl)-3-phenyl-4
[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate]
1. 4R,6R)-tert-Butyl-6-cyanomethyl-2,2-dimethyl-1,3-
dioxane-4-acetate (CAS No. 125971-94-0) 0.588
2. Methanol/Toluene 18.588
3. Ammonia 0.824
4. Raney Nickel 0.235
5. Hydrogen Gas 0.012
6. Cyclohexane 5.294
7. Pivalic acid 0.059
8.
2-[2-(4-Fluorophenyl)-2-oxo-1-phenylethyl]-4-
methyl-3-oxo-N phenylpentanamide (M4) (CAS
No.125971-96-2) 0.882
9. Terbutylmethylether 0.529
10. Isopropyl alcohol 6.471
11. Sodium Hydroxide 0.294
12. Sodium chloride 0.294
13. Sodium bicarbonate 0.294
14. Acetone 5.059
5. Phenyl Butazone calcium
6
1. Hydrazobenzene 0.696
2. N-Butyl diethyl malonate 0.870
3. Sodium methoxide powder 0.239
4. Toluene 0.870
5. Activated carbon 0.043
6. Sodium hydrosulfite 0.043
7. Hyflow 0.043
8. Methanol 3.478
9. Acetic acid 0.565
10. Calcium chloride 0.196
11. Sodium hydroxide 0.261
6. Bumadizone calcium
1. Hydrazobenzene 0.696
2. N-Butyl diethyl malonate 0.870
3. Sodium methoxide powder 0.239
4. Toluene/N-Hexane 1.739
5. Activated carbon 0.043
6. Sodium hydrosulfite 0.043
7. Hyflow 0.043
8. Methanol 3.478
9. Acetic acid 0.565
10. Calcium chloride 0.196
11. Sodium hydroxide 0.261
7. Metoprolol tartrate
1. 4-Methoxy ethyl phenol 0.588
2. Epichlorhydrine 0.471
3. Sodium hydroxide 0.176
4. Monoisopropyl amine 1.000
5. Isopropyl alcohol 1.176
6. L(+) Tartraric acid 0.294
7. Acetone 6.471
8. Activated carbon 0.029
8. Metoprolol succinate
1. 4-(2-Methoxyethyl) phenol 0.588
2. Epichlorhydrine 0.471
3. Sodium hydroxide 0.176
7
4. Monoisopropyl amine 1.000
5. Isopropyl alcohol 1.176
9. Metoprolol base
1. 4-(2-Methoxyethyl) phenol 0.588
2. Epichlorhydrine 0.471
3. Sodium hydroxide 0.176
4. Monoisopropyl amine 1.000
5. Isopropyl alcohol 1.176
6. Succinic acid 0.294
7. Acetone 6.471
8. Activated carbon 0.029
10. Rosuvastatin calcium
1.
6-[(1E)-2-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-
[methyl (methylsulfonyl)amino]-5-
pyrimidinyl]ehtenyl]-2,2-Dimethyl-1,3-Dioxane-4-
Acetic acid-1,1-dimethyl ethyl ester (CAS No.289042-
12-2) 1.333
2. Methanol 10.667
3. Toluene 2.667
4. Hydrochloric acid 0.400
5. Sodium Hydroxide 0.400
6. Calcium acetate 0.533
7. Activated carbon 0.067
8. Hyflow 0.067
11. Racemic
1. Cyanoacetate 0.667
2. Isoveraldehyde 1.333
3. Piperidine 0.033
4. Sulphuric acid 6.667
5. Toluene 1.333
6. Urea 1.333
7. Ethyl acetae 1.333
8. Activated carbon 0.067
10. Chloroform 15.000
11. Sodium hydroxide 1.667
12. Hydrochloric acid 3.333
12. Sevelamer Carbonate
8
1. Allylamine 1.000
2. Hydrochloric acid 2.500
3. Catalyst A 0.050
4. Catalyst B 0.050
5. Epichlorhydrine 0.800
6. Sodium hydroxide 1.500
7. Methanol 10.000
8. Sodium bicarbonate 0.500
13. Benzocaine
1. Para amino benzoic acid 1.000
2. Reducer (Ethanol + Acetone) 2.000
3. Sulphuric acid 1.500
4. Toluene 2.000
5. Methanol 4.500
6. Ammonia 3.000
14. Erdosteine
1. Homocysteinethiolactone hydrochloride 1.111
2. Chloracetylchloride 1.667
3. Triethyl amine 1.667
4. Dichloromethane/ Dichloroethane 8.889
5. Thioglycolic acid 0.889
6. Sodium hydroxide 1.111
7. Hydrochloric acid 1.333
8. Methanol 4.444
9. Acetone 4.444
15.Montelukast sodium
1.
2-(2-3S-3,2,7-Chloro-2-
Quinolinyl)ethenylphenyl)3hydroxy propyl)phenyl 2-
propanol [CAS# 142569-70-8] 1.111
2. MercaptomethylCyclopropane Acetic Acid [CAS#
162515-68-6] 0.333
3. Toluene 55.556
4. Acetonitrile 10.000
5. Di iso propyl ethyl amine 1.111
6. Methane sulphonyl chloride 0.333
7. Dimethyl sulfoxide 4.444
8. Sodium methoxidesolution 1.000
9
9. Acetic acid 2.222
10. Sodium hydroxide 1.111
11. Sodium sulphate 1.111
12. sodium bicarbonate 0.289
13. Ethylacetate 2.222
14. Tertiary butyl amine 0.222
15. Petroleum ether 1.667
16. methanol 17.778
17. N-Heptane 1.556
16.Cosevelam HCl
1. Allylamine 1.000
2. Hydrochloric acid 2.500
3. Catalyst A 0.050
4. Catalyst B 0.050
5. Epichlorhydrine 0.800
6. Methanol 20.000
7. Sodium hydroxide 0.500
8. Hydrochloric acid 0.350
9. Bromodecane 0.200
17.Diclofenac sodium
1. 1 -(2,6-dichlorophenyl)-2-indolinone 1.250
2. Sodium hydroxide 0.375
18. Ambroxol HCl
1. 3,5-Dibromo-2-Aminobenzyl alcohol 1.111
2. Trans-4-Amino cyclohexanol 0.444
3. Tetrahydrofuran 3.333
4. Toluene 2.222
5. Sodium borohydride 0.278
6. Methanol 4.444
7. Isopropyl alcohol 3.333
8. Conc. Hydrochloric acid 0.556
GROUP-2
19.Atovastain calcium
1. (4R,6R)-tert-Butyl-6-cyanomethyl-2,2-dimethyl-1,3-
dioxane-4-acetate (CAS No. 125971-94-0) 0.5
2. Methanol/Toluene 18.58
3. Ammonia 0.82
10
4. Raney Nickel 0.23
5. Hydrogen Gas 0.01
6. Cyclohexane/ Cyclohexanone 5.29
7. Pivalic acid 0.05
8.
2-[2-(4-Fluorophenyl)-2-oxo-1-phenylethyl]-4-
methyl-3-oxo-N phenylpentanamide (M4) (CAS
No.125971-96-2) 0.88
9. Terbutylmethylether 0.52
10. Isopropyl alcohol 6.47
11. Sodium Hydroxide 0.29
12. Sodium chloride 0.29
13. Sodium bicarbonate 0.29
14. Acetone 5.05
15. Hydrochloric acid 0.29
16. Activated carbon 0.02
17. Calcium chloride 0.11
18. Calcium acetate 0.11
19. Acetic acid 0.29
20.Pregabalin
1. Cyanoacetate 1.250
2. Isoveraldehyde 2.500
3. Piperidine 0.063
4. Sulphuric acid 12.500
5. Toluene 2.500
6. Urea 2.500
7. Ethyl acetae 2.500
8. Activated carbon 0.125
9. R(+) Phenyl ethyl amine 1.000
10. Chloroform 22.500
11. Sodium hydroxide 2.500
12. Hydrochloric acid 5.000
13. Sodium hypochlorite 7.500
14. Isopropyl alcohol/ N-Butanol 5.000
21.RCMH ( R(-)-3-(Carbamoylmethyl)-5-methyl hexanoic acid)
1. Cyanoacetate 0.833
2. Isoveraldehyde 1.667
3. Piperidine 0.042
11
4. Sulphuric acid 8.333
5. Toluene 1.667
6. Urea 1.667
7. Ethyl acetae 1.667
8. Activated carbon 0.083
9. R(+) Phenyl ethyl amine 0.667
10. Chloroform 15.000
11. Sodium hydroxide 1.667
12. Hydrochloric acid 3.333
22.Sevelamer HCl
1. Allylamine 1.000
2. Hydrochloric acid 2.500
3. Catalyst A 0.050
4. Catalyst B 0.050
5. Epichlorhydrine 0.800
6. Sodium hydroxide 1.500
7. Methanol 10.000
23.Phenylephrine HCl
1. 3-Hydroxyacetophenone 1.250
2. Toluene 6.250
3. Ethylacetate 7.500
4. Bromine 1.125
5. Aluminiumtrichloride 0.063
6. Phenyl ethyl amine 1.875
7. Isopropyl alcohol.HCl 1.250
8. Sodium bicarbonate 0.625
9. Sodium sulphate 0.625
10. Methanol 12.500
11. Palladium charcoal 0.025
12. Isopropyl alcohol 6.250
13. L(+) Tartaric acid 1.250
14. Liq Ammonia 2.500
15. Sulphuric acid 1.250
16. Acetic anhydride 1.250
24.Phenylephrine base
1. 3-Hydroxyacetophenone 1.111
2. Toluene 5.556
12
3. Ethylacetate 6.667
4. Bromine 1.000
5. Aluminiumtrichloride 0.056
6. Phenyl ethyl amine 1.667
7. Isopropyl alcohol.HCl 1.111
8. Sodium bicarbonate 0.556
9. Sodium sulphate 0.556
10. Methanol 11.111
11. Palladium charcoal 0.022
25.AAPA
1. L-Phenylallanine 2.143
2. Nitric acid 1.429
3. Sulfuric acid 8.571
4. Ammonium hydroxide 15.000
5. Hydrochloric acid 2.286
6. Sodium hydroxide 0.243
7. Methanol 42.857
8. 10 % Palladium carbon 0.056
9. Acetic acid 0.357
GROUP-3
26.Polyallylamine HCl
1. Allylamine 0.333
2. Hydrochloric acid 0.833
3. Catalyst A 0.017
4. Catalyst B 0.017
27.Polyallylamine
1. Allylamine 0.333
2. Hydrochloric acid 0.833
3. Catalyst A 0.017
4. Catalyst B 0.017
5. Sodium hydroxide 0.333
6. Methanol 1.667
28.Allylamine HCl
1. Allylamine 0.333
2. Hydrochloric acid 0.833
13
1.4 Water Requirement, Waste Water Generation and Treatment
Total water requirement will be 143 m3/day, which is met through GIDC water supply. Total
waste water generations will be 125 m3/day. Industrial effluent 120 m
3/day in which low COD
Stream 115 m3/day will be treated in ETP consists of primary, secondary & tertiary treatment ,
then it will be sent to CETP (M/s. ETL) for further treatment and Disposal and High COD Stream
5 m3/day will be treated in MEE or it will be sent to CMEE (M/s. ACPTCL) for Disposal. Domestic
Waste water 5 m3/day will be disposed of through the specific tank & Soak Pit System.
1.5 Air Pollution Source and Control Management
There will be flue gas emission from Boiler 0.6 TPH and 1.0 TPH having Multi Cyclone Separator
& Bag Filter as APCM.
1.6 Hazardous Waste
CAT.
NO.
HAZARDOUS
WASTE
Existing
Quantity Additional
Quantity
Total
Quantity METHOD OF DISPOSAL
33.1 Discarded
Containers/Barrels
/liner
300
Nos./Year
3,500
Nos./Year 3,800
Nos./Year
Collection, Storage,
Transportation, Decontamination
& given registered vendors.
5.1 Used Oil 0.005
KL/Year
8.5
KL/Year
8.505
KL/Year Collection, Storage,
Transportation and Sale to
authorized traders.
35.3 Spent Carbon 0.48
MT/Year
900
MT/Year 900.48
MT/Year
Collection, Storage,
Transportation & given for co-
processing cement industries or
Disposal by incineration at
common incinerator of BEIL
28.6
Spent Solvent -- 8400
MT/Month 8400
MT/Month
Collection, Storage, recovered
through in house distillation or
sent for distillation job work to
authorized recycler then reuse in
process.
28.1 Distillation Residue -- 5
MT/Month 5
MT/Month
Collection, Storage,
Transportation & sent to
cement industries for co-
processing or incineration at
common incinerator of BEIL.
14
1.7 Green Belt
Total 5,800 sq. meter land area is available at site; out of this area around 1,900 sq. meter (33%)
area will be developed as greenbelt.
1.8 Power & Fuel Requirements
Power Requirements:
Power required: 125 KV (Existing)
: 500 KV (Proposed)
Source: DGVCL
Fuel Requirements:
Natural Gas: 50 m3/Day (Existing)
Agro Waste: 2 Ton/Day (Additional proposed)
2.0 INTRODUCTION OF THE PROJECT/BACKGROUND INFORMATION
2.1 Identification of the project and project proponent. In case of mining project, a copy of
mining lease/letter of intent should be given.
Identification of the project and project proponent
M/s. Reine Lifescience proposes expansion of Bulk Drugs and Bulk drug intermediates in
existing unit located at Plot no. 5901, Kanoria Chemicals Road, Nr. Par Drugs, GIDC Estate,
Ankleshwar-393002,, Dist: Bharuch, Gujarat.
List of Partners:
Sr.
No.
Name of
Partners
Residential. Address Qualification Phone No.
1. Kalpesh M
Kothiya
A-304, Chandrajyot
Apartment, GIDC, Ankleshwar-
393002.
B.Sc. (Organic
Chemistry)
919825138460,
+912646239556
2. Amish B Shah 12-A, Badrinath Apart,
Shimpoli Road, Near Soniwadi,
Borivali (West)-400092
B.E.
(Electronics)
919820193549,
+912646239556
3. Devang B Shah 12-A, Badrinath Apart,
Shimpoli Road, Near Soniwadi,
Borivali (West)-400092
B. Com 919820193549,
+912646239556
4. Vipul M Kothiya A-304, Chadrajyot Apartment,
GIDC, Ankleshwar-393002
B.Com 919825138460,
+912646239556
15
2.2 Brief description of nature of the Project
Proposed Expansion of Bulk Drugs & Bulk drug Intermediates in existing unit.
2.3 Need for the project and its importance to the country and or region
The demand for products intended to be manufacture is increasing in the country by expanding
this unit, M/s. RL will be able to meet the demand of various products locally. The project will
save forex as certain products import will be reduced. This will also generate direct and indirect
employment opportunity for various levels of people.
2.4 Demands-Supply Gap
Based on our informal survey of the market with our current customers and various traders, we
have found that there is a big potential for the range of the products we are planning. These
products will be an addition to the current product as well as expansion of Bulk Drugs & Bulk
drug Intermediates in existing unit.
2.5 Imports vs. Indigenous production
Based on the current cost of indigenous raw materials and the non availability of some
materials, we will have to import some of the key raw materials as they are not available
indigenously. This will make us very competitive against imported finished products and we will
export of our finished products in the international market.
2.6 Export possibility
We shall explore the possibility of export the products.
2.7 Domestic/Export Markets
Our products have good demand in international market. We shall explore the possibility of
export the products.
16
2.8 Employment Generation (Direct and Indirect) due to project.
M/s. Reine Lifescience will give direct employment to local people based on qualification and
requirement. In addition to direct employment, indirect employment shall generate ancillary
business to some extent for the local population.
3.0 Project Description
3.1 Type of Project including interlinked and interdependent projects, if any.
No interlinked project has been submitt
• Location (map showing general location, specific location and project boundary & project
site layout) with coordinates.
• Map showing general
location.
Project
Site
19
3.3 Details of alternate sites considered and the basis of selecting the proposed site,
particularly the environmental considerations gone into should be highlighted.
Looking to the international market demand of the products it was decided by M/s. Reine
Lifescience to expand existing facility.
Major factors involved in the selection of site are listed below:
• Minor site clearance activities shall be carried out.
• The project site is located on level ground, which does not require any major land filling
for area grading work.
• Proximity to Raw Material suppliers.
• Site is very well connected by road and railway.
• Availability of Fuel, Power, Common TSDF, etc.
Modern infrastructure support and amenities at par in other global markets, including:
� Efficient transport facilities.
� Environment-friendly zone.
� Uninterrupted power supply.
3.4 Size or Magnitude of Operation
Please refer Section-1.2.1, Page No. 3.
3.5 Project Description with process details (a schematic diagram/flow chart showing the
project layout, components of the project, etc. should be given)
Please refer Form-I, Annexure-III.
3.6 Raw Material required along with estimated quantity, likely source, marketing area of
final product/s, mode of transport of raw material and Finished product.
For raw material required along with quantity; Please refer Section-1.3, Page No. 4. We shall
procure the raw material as much as possible from domestic market and if there is no
20
availability of any raw material we will import. We shall explore the possibility of export the
finished products.
3.7 Resource optimization/recycling and reuse envisaged in the project, if any, should be
briefly outlined.
After expansion of the unit, Possibility for reuse and recycle will be explored.
3.8 Availability of water its source, energy/power requirement and source should be
given.
Water Source
Total water requirement shall met through GIDC Water Supply.
Power Requirements:
Power required: 125 KV (Existing)
: 500 KV (Proposed)
Source: DGVCL
Fuel Requirements:
Natural Gas: 50 M3/Day (Existing)
Agro Waste : 2 Ton/Day (Additional proposed)
3.9 Quantity of wastes to be generated (liquid and solid) and scheme for their
management/disposal.
Please refer Please refer Form-I, Annexure-IV & VI.
21
3.10 Schematic representations of the feasibility drawing which give information of EIA
purpose.
4.0 Site Analysis
4.1 Connectivity
• Site is very well connected by road
• Availability of fuel, power, Common TSDF, etc.
4.2 Land Form, Land Use and Land Ownership
Land Use will be incorporated in the EIA Study.
RECONNAISSANCE SURVEY OF EXISTING PLANT ANNUAL REPORT
MARKET ASSESSMENT
FINANCIAL REPORT
PROJECT REPORT
INTRODUCTION
MONITORING OF AIR, WATER & SOIL QUALITY & NOISE
LEVELS. DATA ON METEOROLOGY SOCIO-ECONOMIC STATUS
& BASIC AMENITIES. SITE VISITS BY AND INTERVIEWS WITH
LOCALS
BASELINE
ENVIRONMENTAL
STATUS
ENVIRONMENTAL INFORMATION CENTRE
CENTRAL GROUND WATER BOARD
GUJARAT POLLUTION CONTROL BOARD (GPCB)
PUBLIC HEALTH ENGINEERING DEPT.
AGRICULTURE DEPARTMENT
FOREST DEPARTMENT
IRRIGATION DEPARTMENT
EMPLOYMENT EXCHANGE
HEALTH CENTER
CENSUS DEPT.
INDIAN METEOROLOGICAL DEPT.
SOCIOECONOMIC
STATUS &
INFRASTRUCTURE
PROPOSED
PLANT
FACILITY DESCRIPTION
IMPACTS
METHODOLOGY OF
IMPACT
ASSESSMENT
IDENTIFICATION & ASSESSMENT OF IMPACTS
EVALUATION OF IMPACTS BY MATRIX METHOD
SOURCE OF INFORMATION OVERVIEW OF
E. I. A. STUDIES
ACTIVITIES
ENVIRONMENTAL
MANAGEMENT PLAN
DESCRIPTION OF EFFLUENT TREATMENT PLAN, AIR
POLLUTION CONTROL, HAZARDOUS WASTE MANAGEMENT,
GREEN BELT DEVELOPMENT MONITORING PROGRAM
RISK ANALYSIS
STUDIES &
DISASTER
MANAGEMENT PLAN
SAFETY, HEALTH & ENVIRONMENTAL POLICY, GUIDELINES BY
DIRECTOR GENERAL OF FACTORY SAFETY, MINISTRY OF LABOR. CONSEQUENCE ANALYSIS
PREPARATION OF DISASTER MANAGEMENT PLAN
22
4.4 Existing land use pattern (agriculture, non-agriculture, forest, water bodies (including
area under CRZ)), shortest distances from the periphery of the project to periphery of the
forests, national park, wild life sanctuary, eco sensitive areas, water bodies (distance from
HFL of the river), CRZ. In case of the notified industrial area, a copy of the Gazette
notification should be given.
Existing land use pattern will be incorporated in the EIA Study. CRZ Clearance is not
applicable.
4.5 Existing Infrastructure
Existing operating industry having Production Area, Adm. Bldg., Parking, Raw Material
Storage, etc.
4.6 Soil Classification
Soil Classification will be incorporated in the EIA Study.
4.7 Climatic data from secondary sources.
Climatic data will be incorporated in the EIA Study.
4.8 Social infrastructure available.
Various Programs/ Projects related to Social & Economic development of surrounded area
has been planned, which are as follows.
A) Natural Resource Management – The main focus of this program will be to maximize the
yield returns of the farmers through efficient management of existing resources &
extension of new agricultural practices.
1) Integrated Agricultural Growth Project – For improvement and use of the modern
techniques and thereby would certainly contribute to prosperity in the agriculture
sector and reduce the rural poverty by programs like Farmers Training, Nursery
Growing Trainings, Modern agriculture equipment distribution programs etc.
23
2) Animal Husbandry Projects – Various programs like health checkups & treatment,
vaccination program, Anti sterility camps, breed improvement etc. will be carried
out.
B) Income Generation Program -
1) Establishment of Self help groups.
2) Rural Entrepreneurship Development Program
3) Handcrafts Development Program
4) Vocational Training
5) Business process outsourcing
C) Health, Education & Infrastructure
1) Aids Awareness Program
2) General Health Camps
3) Innovative Teaching Methods
4) Adult Education
5) Sanitation
6) Infrastructure Development Projects
5.0 Planning Brief
5.1 Planning Concept (type of industries, facilities, transportation etc) Town and Country
planning/Development authority classification.
Type of Industry: Proposed expansion of Bulk Drugs & Bulk drug Intermediates in existing
manufacturing unit.
5.2 Population Projection
Population Projection will be incorporated in the EIA Study
24
5.3 Land use planning (breakup along with green belt etc.)
SR. NO. PARTICULAR AREA (m2)
1 Production Area-I 800
2 Production Area-II 800
3 Raw Material Storage Area 500
4 Utility 100
5 Storage (Hazardous Chemical) 150
6 Hazardous Waste Storage Area 250
7 Effluent Treatment Plant 350
8 Green Belt 1900
9 Roads 50
10 Parking Area 50
11 Admin Block 100
12 Security Office 100
13 Clean Room Area 300
14 DM Plant 250
15 D.G. Room 100
Total 5800
5.4 Assessment of Infrastructure Demand (Physical & Social)
• Employment would be as per prevailing norms of state government for skilled and
unskilled people for the proposed expansion activity.
• Social Welfare
• Cordial relation with the villages shall be established and representation shall be made
to villagers for help for creation of facilities related to health, education, etc.
5.5 Amenities/Facilities
Details of amenities available in study area
Population Projection will be incorporated in the EIA Study
25
6.0 Proposed Infrastructure
6.1 Industrial Area (Processing Area)
Processing Area (Production Area, Utility , ETP Area, Admin Block, DM Plant, Security Office,
D.G.Room ) = 2,500 m2
6.2 Residential Area (Non Processing Area)
Non Processing Area (Raw material storage area, Storage (Hazardous Chemicals) area,
Hazardous waste storage Area, Clean room Area, Utility ,Road ,Parking Area ,green belt) =
3,300 m2
Green Belt: 1,900 m2
6.3 Green Belt
Total 5,800 sq. meter land area is available at site; out of this area around 1,900 sq. meter
(33%) area will be developed as greenbelt.
6.4 Social Infrastructure
• Water requirement will be met through GIDC Water Supply.
• Power supply by DGVCL.
6.5 Connectivity (Traffic and Transportation Road/ Rail/Metro/ Water ways etc)
Major factors involved in the selection of site are listed below:
• Site is very well connected by road
• Proximity to Raw Material suppliers
• Availability of sufficient land free from cultivation
• Availability of power facilities
• Availability of fuel
6.6 Drinking water Management (Source & Supply of water)
Total water requirement shall met through GIDC Water Supply.
26
6.7 Sewerage System
Sewage pipes are laid in entire company for the removal and disposal of mainly non-
harmful liquid wastes from the offices, canteen and domestic waste coming from different
section of industry. These liquid wastes are sent to septic tank & soak pit.
6.8 Solid Waste Management
Please refer Form-I, Annexure-VI.
6.9 Power Requirement & Supply/Source
Please refer Section 1.8, Page No. 13 of this report.
7.0 Rehabilitation and Resettlement (R & R) Plan
7.1 Policy to be adopted (central/state) in respect of the project affected including home
oustees, land oustees and landless laborers (a brief outline to be given)
There is no habitation on the proposed expansion project activity area and it is open
industrial land, so R & R policy is not applicable to this project.
There shall not be displacement of any population in project area. Any major activity that
may lead to resettlement of the people is considered as permanent impact. Hence, there is
no permanent impact on this account. The increasing industrial activity will boost the
commercial and economical status of the locality up to some extent.
8. Project Schedule & Cost Estimates
8.1 Likely date of start of construction and likely date of completion (Time schedule for
the project to be given).
We shall start construction of expansion project after getting EC & CTE and we shall start
production after applying for CCA.
27
8.2 Estimated Project cost along with analysis in terms of economic viability of the
project.
The total cost of the project after proposed expansion will be Rs. 5 Crores .
9. Analysis of Proposal (Final Recommendations)
9.1 Financial and social benefits with special emphasis on the benefit to be local people
including tribal population, if any, in the area.
• Employment would be as per prevailing norms of state government for skilled and
unskilled people for the proposed expansion project.
• Social Welfare shall be done.
• Cordial relation with the industry shall be established and representation shall be made
to villagers for help for creation of facilities related to health, education, etc.