prospot 9 · extended arm ext. arm up & down extended arm wall or ground mount concealed cable...

PROJECT: TYPE: CATALOG #:

PROSPOT 9 WHITE LIGHT AND STATIC COLOR SPECIFICATION

4341 Fulcrum Way NE, Rio Rancho New Mexico 87144Revised June 22, 2020Specifications subject to change without notice 1/6

P.: 505.345.0888 | insightlighting.com

- -- - - -- -PS9

PROFILE

LIGHT SOURCE

WHITE CCT

PERFORMANCE UP TO 410,185 PEAK CANDELA

HOUSING HEAVY DUTY A380 DIE-CAST ALUMINUM

POWER INTEGRATED POWER SUPPLY

LENS

WARRANTY

OPERATING TEMP

LUMEN MAINTENANCE

5-YEAR LIMITED

-40° C TO 50° C

100,000 HOURS

ETL , cETL, IP67, IK09, OPTIONAL 3G

OPTICS

STATIC COLOR

WEIGHT 15 LBS (6.8 KG)

VOLTAGE UNIVERSAL (120V-277V), 347V

EPA 0.483 FT2

TEMPERED GLASS

DIMMING 0-10V, DMX

FINISH

CERTIFICATION

LOW (30 W), MEDIUM (50 W), HIGH (100 W)

2700K, 3000K, 3500K, 4000K

4°, 10°, 20°, 40°, 60°, 100°, HSL

RED, GREEN, BLUE, AMBER

HIGH DURABILITY POWDER COATING

CABLE COLOR BLACK OR WHITE

STANDARD FINISHES

OP TICS

PERFORMANCE SAMPLE

PROFILE

3.00”

6.75”

9.00”

11.48”

2.00”

5.28”

186°

OP TIONS

go to fixture dimensions >

go to performance data >

TEXTUREDL. BRONZE

TEXTUREDNATURAL

TEXTUREDS. STONE

VISOR WIREGUARDSNOOT

4°

100°

10°

HSL

20° 40° 60°

LUMENS

4000K50 W 4°

3620

410185

69 LM/W

10°

3586

51359

72 LM/W

20°

3300

51676

65 LM/W

40°

3572

6365

71 LM/W

60°

3275

2945

66 LM/W

CANDELA

EFFICACY

TEXTUREDBRONZE

TEXTUREDWHITE

TEXTUREDBLACK

IP66 IK09IP66ANSI C136.33GIP67

ANSI C136.3

IK09ANSI C136.33G





- -- - - -- -PS9

SPECIFICATION

2 3 4 5 6 7 8 9

PS91

seperate options with dashes

1 FIXTUREPROSPOT 9 PS9

3 CCT2700K 27K

RED R

3000K 30K

GREEN G

3500K 35K

BLUE B

4000K

AMBER

40K

A

2 WATTAGE

4 OPTIC

converts 5° to 10° X 60°(100W converts 10° to 10° X 60°

HORIZONTAL SPREAD LENS HSL

30 WLOW OUTPUT LO

50 WMEDIUM OUTPUT MO

100 W

not available with 4°

HIGH OUTPUT HO

Optical kit for field adjustable beam spreads. Converts 5° to 10°, 20°, 40°, 60°, and HSL (100W converts 10° to 20°, 40°, 60°, and HSL)

OPTICAL KIT OK

9 OPTIONS

field installableVISOR ACCESSORY VS

field installableSNOOT ACCESSORY SN

field installableWIRE GUARD ACCESSORY WG

field installable2.50" DIA. POLE ADAPTOR PA2

field installable2.38" TENON ADAPTOR TA2

field installable4.00" DIA. POLE ADAPTOR PA4

field installable4.00" TENON ADAPTOR TA4

PLUG & PLAY CONNECTION PNPnot available with pendant mountrequires leaders and may require jumper cablessee order info below and diagrams on page 6

SWIVEL CANOPY SCfor use with indoor pendant mount only

4° 4

20° 20

10° 10

40° 40

60° 60

100° 100

for scene changes only, not intended for showssee component requirements below

WIRELESS DMX WRCN

all-white cabling and connectors option(white fixtures are provided with white cabling standard. All other fixture finishes are provided with black cabling unless WC option is specified)

WHITE CABLING WC

3G ANSI 136.31 ratedTRUNNION TR

KNUCKLE KN

EXAUD-X

EXA-X

ceiling canopy has same finish as fixture unless specified otherwise

PENDANT PNS-X

5 MOUNTING

EXTENDED ARM

EXT. ARM UP & DOWN

extended arm wall or ground mount

concealed cable

contact factory for availability

extended arm uplight and downlightwall or ground mount

X = pendant or arm length

not available with 100W

8 FINISHTEXTURED WHITE TW

TEXTURED LIGHT BRONZE TLB

TEXTURED BLACK TBL

TEXTURED GREY TG

TEXTURED NATURAL TN

TEXTURED BRONZE TBR

TEXTURED SANDSTONE TS

CUSTOM COLOR CCcontact factor for custom color additional charges will apply

6 VOLTAGE

dimming controls to be provided by others

7 CONTROLS0-10V DIMMING DIM

requires DMX Distribution and Programming Kit see below

DMX DIMMING DMX

contact factory for 347V347V 347

UNIVERSAL UNV120-277V

A wireless transmitter inside a IP67 rated Hoffman enclosure intended to be installed in the line of sight or a Repeater or a receiver. Requires 120/277V AC power input and Belden 9841 DMX cable input from a DMX source. All connections and seals by others. DMX is hard wired from the DMX source to the Hoffman enclosure.

WIRELESS DMX COMPONENTS - REQUIRED FOR WRCNWIRELESS TRANSMITTER ENCLOSURE (REQUIRED)

WIRELESS RECEIVERA wireless receiver Hoffman enclosure intended to be installed before a run of fixtures. Requires 120/277V AC input and Belden 9841 DMX cable output to fixture run. All connections and seals by others. DMX is hard wired from the Hoffman enclosure to all necessary luminaire j-boxes.

WTRE

WRCE

CONTROL & WIRING OP TIONS

DMX DISTRIBUTION & PROGRAMMING KIT - REQUIRED FOR DMX EXTERIOR LEADER CABLES - REQUIRED FOR PLUG AND PLAY

EXTERIOR JUMPER CABLES

DMX PROGRAMMING TOOLOne DMX progamming/troubleshooting tool is required for field re-addressing of factory DMX settings.

LPT 5.0 FT PNP LEADER CABLEPlug & Play (PNP) fixtures require a leader cable for each run. 32 fixtures max per run.

ACLM-5

2.0 FT PNP JUMPER CABLERequired if fixtures are not mounted in an end-to-end continuous manner. For line voltage only.

ACJM-2


ACJM-1


ACJM-5


ACJM-10


ACJM-25

DMX/RDM DISTRIBUTION KITIP67 rated enclosure with three outputs. Each output is limited to one run per output, up to 32 fixtures max.Three terminators are included for end of line termination.

CDS-RDM Textured white fixtures are provided with white cabling standard. All other fixture finishes are provided with black cabling unless white cabling (WC) option is ordered.

Textured white fixtures are provided with white cabling standard. All other fixture finishes are provided with black cabling unless white cabling (WC) option is ordered.

CORROSION RES. FINISH CRFCorrosion Resistance Complies with ASTM B117 standard

CRF is recommended for coastal or extreme exterior environments





- -- - - -- -PS9

FIXTURES PER 15 AMP CIRCUIT (FULL LOAD)

LOW OUTPUT (30 W) MEDIUM OUTPUT (50 W) HIGH OUTPUT (100 W)

277V 277V 277V

120 72 36

120V 120V

52 16

120V

31

FIXTURE

PROSPOT 9

PERFORMANCE

LOW OUTPUT (30 W) MEDIUM OUTPUT (50 W) HIGH OUTPUT (100 W)

4° (3.9°)

OPTIC

10° (10.1°)

20° (18.3°)

40° (43.3°)

60° (58.7°)

100° (102.4°)

HSL (10°X50°)

PEAKCANDELA

193744

30815

31677

3819

1805

669 1052

9861

PEAKCANDELA

410185 N/A

51359

51676

6365 12852

2945

16435 29226

PEAKCANDELA

1029925

42740

5891

2285

LUMINAREEFFICACY

75 lm/W

72 lm/W

51 lm/W

60 lm/W

67 lm/W

62 lm/W 56 lm/W

69 lm/W

LUMINAREEFFICACY

69 lm/W N/A

72 lm/W

65 lm/W

71 lm/W 67 lm/W

66 lm/W

68 lm/W 65 lm/W

LUMINAREEFFICACY

72 lm/W

69 lm/W

68 lm/W

58 lm/W

DELIVERED LUMENS

2408 lm

2152 lm

1515 lm

2143 lm

2007 lm

1840 lm 2728 lm

2083 lm

DELIVERED LUMENS

3620 lm N/A

3586 lm

3300 lm

3572 lm 6786 lm

3275 lm

3472 lm 6596 lm

DELIVERED LUMENS

7187 lm

6642 lm

6550 lm

5840 lm

CCT

4000K

4000K

4000K

4000K

4000K

4000K

4000K





- -- - - -- -PS9

10.09”

6.75”

9.00”

11.48”

2.00”

3.00”

5.28”

186°Ø1.26”

MOUNTING

2.75” Ø0.20”4.75”

2.00”

48.0” LEAD NEUTRAL VOLTAGE

GROUND

DATA -DATA +

WIRING

10.09”

11.89”

180°

4.38”

Ø0.45”

6.04”

MOUNTING

ANGLE OF ROTATION2.89”

6.04”

11.67”

9.00”

4.94”

0.69”

6.96”5.28”

2.00”

6.04”

SPECIFY6.00” MIN

96.00” MAX

10.06”90°

OPTIONALSWIVEL

CANOPY (SC)

MOUNTING

T-BAR PROVIDEDFITS 4.0 J-BOX 5.00”

6.00”SWIVEL BRACKET

PROVIDEDFITS 4.0 J-BOX

DIMENSIONS

TRUNNION MOUNT (TR)

KNUCKLE (KN)

PENDANT (PNS)





- -- - - -- -PS9

10.06”

1.32”

6.50”

3.71”

Ø0.44”

MOUNTING

6.75 ”

186°

SPECIFY10.00” MIN24.00” MAX


GROUND

DATA -DATA +

WIRING

6.50”

3.71”

Ø0.44”

MOUNTING


GROUND

DATA -DATA +

WIRING

2.88”

3.38” 16.88”

186°

186°

2.88”

3.38”

16.88”

186° 186°

EXTENDED ARM (EXA)

EXTENDED ARM UP & DOWN (EXAUD)





- -- - - -- -PS9

VISOR (VS)

5.00”10.28”

OP TICAL KIT (OK)

5.66”

0.38”

SNOOT (SN)

5.00”10.28”

WIREGUARD (WG)

5.74”

0.46”

4.00" DIAME TER POLE MOUNT (PA4)

2.50" DIAME TER POLE MOUNT (PA2)

PLUG AND PL AY CONNECTION (PNP)

2.38" TENNON (TA2) 4.00" TENNON (TA4)

2.50”

186°

2.00”

2.00”6.25”

2.00”

15.71”

55°55°

15.71”

186°

2.00”

4.50”

2.00”6.25”

2.00”

55°55°186°

2.50”

1.50”

2X STAINLESSSTEEL CLAMPSSAME FINISHAS FIXTURE

186° 1.50”

4.00”

2X STAINLESSSTEEL CLAMPSSAME FINISHAS FIXTURE

01

01

02 02 03 02 04

LEADER CABLE (ACLM-5) MUST ORDER SEPARATELY, ONE REQUIRED FROM J-BOX TO FIRST FIXTURE RUN

02 T-CONNECTOR (ACT): ONE SUPPLIED FOR EACH FIXTURE ORDERED WITH PLUG & PLAY OPTION (PNP). ALLOWS FOR PLUG & PLAY INSTALLATION.

03 JUMPER CABLE (ACJM-X): OPTIONAL. ALLOWS FOR ADDITIONAL SPACING BETWEEN FIXTURES. AVAILABLE LENGTHS 2’, 5’, 10’, 25’.

04 CAP/ATM: SUPPLIED. MUST BE INSTALLED AT THE END OF EACH FIXTURE RUN.

prospot 9 · extended arm ext. arm up & down extended arm wall or ground mount concealed cable...

Documents