pruebas holdreboot

8/10/2019 Pruebas Holdreboot

1/8


2/8

Power supply model : pem-3

Status : up

===============================================================================

A:LIM_LOLGD1_A7750# show version

TiMOS-C-8.0.R6 cpm/hops ALCATEL SR 7750 Copyright (c) 2000-2010 Alcatel-Lucent.

All rights reserved. All use subject to applicable license agreements.

Built on Thu Nov 11 20:27:48 PST 2010 by builder in /rel8.0/b1/R6/panos/main

2. Verificar el tipo de controladora del equipo

A:LIM_LOLGD1_A7750# show card

===============================================================================

Card Summary

===============================================================================

Slot Provisioned Equipped Admin Operational Comments

Card-type Card-type State State

-------------------------------------------------------------------------------

1 iom2-20g iom2-20g up up

2 iom3-xp iom3-xp up up

A sfm2-200g sfm2-200g up up/active

B sfm2-200g sfm2-200g up up/standby

===============================================================================

A:LIM_LOLGD1_A7750# show card detail

===============================================================================

Card 1

===============================================================================


Card-type Card-type State State-------------------------------------------------------------------------------

1 iom2-20g iom2-20g up up

IOM Card Specific Data

Clock source : none

Named Pool Mode : Disabled

Fail On Error : Disabled

Available MDA slots : 2

Installed MDAs : 2

Hardware DataPlatform type : 7750

Part number : 3HE01473AAAD01

CLEI code : IPUIAVADAA

Serial number : NS1034F0352

Manufacture date : 08182010

Manufacturing string :

Manufacturing deviations :

Manufacturing assembly number :

Administrative state : up

Operational state : up

Temperature : 52C

Temperature threshold : 75C

Software boot (rom) version : X-8.0.R6 on Thu Nov 11 20:12:05 PST 2010 by*

Software version : TiMOS-I-8.0.R6 iom/hops ALCATEL SR 7750 Cop*


3/8


4/8

===============================================================================



-------------------------------------------------------------------------------

A sfm2-200g sfm2-200g up up/active

BOF last modified : N/A

Config file version : SAT OCT 18 06:40:09 2014 UTC

Config file last modified : N/A

Config file last saved : 2014/11/12 01:39:54

M/S clocking ref state : primary

Flash - cf1:

Administrative State : up

Operational state : not equipped

Flash - cf2:

Administrative State : upOperational state : not equipped

Flash - cf3:



Serial number : 20100326049E872B872B

Firmware revision : 20081107

Model number : SMART CF

Size : 1,953 MB

Free space : 1,790 MB

Hardware Data

Platform type : 7750

Part number : 3HE01171AAAF02

CLEI code : IPUCAJMFAA








Temperature : 53C



Software version : TiMOS-C-8.0.R6 cpm/hops ALCATEL SR 7750 Cop*

Time of last boot : 2014/10/18 14:22:55

Current alarm state : alarm cleared

Base MAC address : 7c:20:64:4a:85:91

Memory capacity : 2,048 MB

===============================================================================

Card B

===============================================================================



-------------------------------------------------------------------------------B sfm2-200g sfm2-200g up up/standby


5/8

BOF last modified : N/A

Config file version :

Config file last modified : N/A

Config file last saved : N/A

M/S clocking ref state : secondary

Flash - cf1:



Flash - cf2:



Flash - cf3:


Operational state : upSerial number : 2010032704A2EFE5EFE5

Firmware revision : 20081107

Model number : SMART CF

Size : 1,953 MB

Free space : 1,875 MB

Hardware Data

Platform type : 7750

Part number : 3HE01171AAAF02

CLEI code : IPUCAJMFAA








Temperature : 50C



Software version : TiMOS-C-8.0.R6 cpm/hops ALCATEL SR 7750 Cop*

Time of last boot : 2014/10/18 14:23:03

Current alarm state : alarm cleared

Base MAC address : 7c:20:64:4a:a4:29

Memory capacity : 2,048 MB

===============================================================================

A:LIM_LOLGD1_A7750#

3.

Verificar que ambas controladoras se encuentre correctamente sincronizadas

A:LIM_LOLGD1_A7750# show redundancy synchronization

===============================================================================

Synchronization Information

===============================================================================

Standby Status : standby ready

Last Standby Failure : N/A

Standby Up Time : 2014/10/18 14:23:03

Standby Version : TiMOS-C-8.0.R6 cpm/hops ALCATEL SR 7750


6/8

Copyright (c) 2000-2010 Alcatel-Lucent.

All rights reserved. All use subject to

applicable license agreements.

Built on Thu Nov 11 20:27:48 PST 2010 by

builder in /rel8.0/b1/R6/panos/main

Failover Time : N/A

Failover Reason : N/ABoot/Config Sync Mode : Configuration

Boot/Config Sync Status : Config only synchronized

Last Config File Sync Time : 11/12/2014 01:39:55

Last Boot Env Sync Time : Never

===============================================================================

Es importante que en la lnea resaltada en rojo figure All boot environment

synchronized por lo cual ejecutamos el comando:

A:LIM_LOLGD1_A7750# admin redundancy synchronize boot-env

Syncing boot environment:

boot option file : cf3:\bof.cfg ... OKboot loader : cf3:\boot.ldr ... OK

primary config : cf3:\LIM_LOLGD1_A7750.cfg ... OK

primary config : cf3:\LIM_LOLGD1_A7750.ndx ... OK

primary image : cf3:\TiMOS-8.0.R6\cpm.tim ... OK

primary image : cf3:\TiMOS-8.0.R6\iom.tim ... OK

primary image : cf3:\TiMOS-8.0.R6\isa-aa.tim ... OK

Waiting for standby to read new BOF.CFG ... OK

Completed.

A:LIM_LOLGD1_A7750# show redundancy synchronization

===============================================================================

Synchronization Information

===============================================================================

Standby Status : standby ready

Last Standby Failure : N/A

Standby Up Time : 2014/10/18 14:23:03

Standby Version : TiMOS-C-8.0.R6 cpm/hops ALCATEL SR 7750

Copyright (c) 2000-2010 Alcatel-Lucent.

All rights reserved. All use subject to

applicable license agreements.

Built on Thu Nov 11 20:27:48 PST 2010 by

builder in /rel8.0/b1/R6/panos/main

Failover Time : N/A

Failover Reason : N/A

Boot/Config Sync Mode : Configuration

Boot/Config Sync Status : All boot environment synchronized

Last Config File Sync Time : 11/12/2014 01:39:55

Last Boot Env Sync Time : 11/12/2014 12:33:21

===============================================================================

*A:LIM_LOLGD1_A7750#

4. Proceder a reiniciar la controladora en stand-by (agregando la palabra hold)

# admin reboot standby hold

5.

Verificar el funcionamiento y monitorear por 5 minutos

# show card


7/8

6.

Proceder a reiniciar la controladora en stand-by (para que regrese al funcionamiento

normal)

# admin reboot standby

7.

Verificar que levante y quede en stand-by

Informacin Extra

Encontr el siguiente comando disponible desde release 12 (entiendo que se realizar el upgrade de

los 7750SR de Claro a 12.0R4 pronto) , el cual me parece es til para el proceso de TS:

# admin reboot standby hold

hold Administratively hold a rebooted standby CPM from coming back online. This may be usefulfor troubleshooting purposes (e.g. standby SF/CPM is suspected of causing some system problems).

The CPM should not be left offline as the system does not have control redundancy while one CPM is

offline. The CPM must be rebooted again (without the 'hold' keyword) to return it to service.

La verificacin que tendramos que revisar seria si el comando es compatible con los tipos de

procesadoras desplegados en Claro:

Controladora/Tipo de Chassis 7750-SR12 7750-SR7 7750-SRc12

Total

general

53 16 16

200g CPM / Switch Fabric 2 70 70

250g CPM / Switch Fabric 3 8 8

400g CPM / Switch Fabric 2 20 6 26

7750-SRc12 CFM-XP 40 40

Total general 20 84 56 160

Aunque tambin entiendo que una opcin adicional seria disponer de un comando que le permita

elegir al cliente si desea tener redundancia en las switch-fabrics de manera similar a la

redundancia de las CPMs (active/stand-by) o trabajar en el modo active/active a nivel de switch-

fabrics segn sus necesidades.


8/8

pruebas holdreboot

Documents