ps100 single solid top cover & frame facta class c & d · stated load. all products are...
TRANSCRIPT
18
Fabricated Steel Products Solid Top
peter-savage.co.uk
Chequer plate solid top cover and frame, 38 mm deep as standard. The product is underbraced where required to meet the stated load. All products are manufactured under an ISO 9001 Quality system. This product is hot dip galvanised to BS EN ISO 1461 as standard.
Options:
Double Polyethylene Seal Locking - Stainless Steel Screws (Slot, Allen, or Hex Pin Head) Lock & Lift Device Peephole Inspection Point Engraved Badging e.g. Water, Gas
Standard Sizes
Clear Opening (mm)
Suffix Clear Opening (mm)
Suffix
300 x 300 A 750 x 750 F
450 x 450 B 900 x 600 G
600 x 450 C 900 x 750 H
600 x 600 D 900 x 900 J
750 x 600 E 1000 x 1000 K
Non-standard sizes availableProduct Loading codes:
Chequer plate solid top cover and frame, 95 mm deep as standard. The product is underbraced where required to meet the stated load. All products are manufactured under an ISO 9001 Quality system. This product is hot dip galvanised to BS EN ISO 1461 as standard.
Options:
Single Polyethylene Seal Locking - M16 Cap Head Engraved Badging e.g. Water, Gas M12 Lifting Points
Standard Sizes
Clear Opening(mm)
Suffix Clear Opening (mm)
Suffix
300 x 300 A 750 x 750 F
450 x 450 B 900 x 600 G
600 x 450 C 900 x 750 H
600 x 600 D 900 x 900 J
750 x 600 E 1000 x 1000 K
Non-standard sizes available.Product Loading codes:
PS100Single Solid Top Cover & FrameFACTA Class AA, AAA, B
PS100Single Solid Top Cover & FrameFACTA Class C & D
Section through detail.Section through detail.
FACTA Class AA = PS101FACTA Class AAA = PS102FACTA Class B = PS104
FACTA Class C = PS105FACTA Class D = PS106
Specification/Ordering:Please choose the required loading code and size suffix, stating any optional extras i.e. PS104D Badged Water