purity* fg mf - acculube / accurate lubricants & metalworking

PURITY* FG MF AEROSOL LUBRICANT Introduction Petro-Canada’s PURITY* FG MF Aerosol is an advanced food grade lubricant packaged in a spray can and formulated to deliver superior, longer lasting protection than leading specialty food grade lubricants. PURITY* FG’s superiority results from more than 25 years formulating experience. Using the patented HT purity process, Petro-Canada produces a 99.9% pure, crystal clear base oil – the purest in the world. Free of impurities that can hinder performance and fortified with specially selected performance additives, PURITY* FG MF Aerosol is highly resistant to oxidative breakdown and provides excellent protection from wear and corrosion. Tough enough to handle wet food processing environments, its tacky nature allows it to adhere strongly to metal surfaces, resisting water washout and water spray loss. PURITY* FG MF Aerosol also meets the highest food industry purity standards and fits perfectly in HACCP (Hazard Analysis and Critical Control Point) and GMP (Good Manufacturing Practice) plans. All of its fluid components comply with FDA regulation 21 CFR 178.3570 “Lubricants with incidental food contact”. It is H1 registered by NSF and meets the requirements of the U.S. Department of Agriculture (USDA) as an H1 lubricant for use in federally inspected meat and poultry plants where incidental food contact may occur. It is approved by the Canadian Food Inspection Agency for use in registered food processing plants and certified kosher and pareve by Star K. Features and Benefits • Outstanding resistance to oxidative breakdown • Keeps systems free of sludge and varnish • Results in longer fluid life and reduced downtime even at high temperatures and in the presence of water and acidic contamination • Long-term protection from rust and corrosion • Protects chains and metal surfaces from rusting • Excellent wear protection • Prevents metal-to-metal contact between chains and drive sprockets • Reduces maintenance costs • Strongly adheres to all surfaces • Resists throw-off from chains, preventing fluid drips • Highly resistant to water washout and spray loss • Reduces fluid consumption • Environmentally safe • Non-ozone depleting propellant (CFC free) • Comes with an application tube for accuracy when lubricating hard-to-reach locations • Fully approved for use in and around food processing areas • H1 registered by NSF • All fluids meet the requirements of the U.S. Department of Agriculture (USDA) as H1 lubricants for use in federally inspected meat and poultry plants where incidental food contact may occur • All fluid components comply with FDA 21 CFR 178.3570 “Lubricants with incidental food contact”

Upload: others

Post on 12-Sep-2021

3 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: PURITY* FG MF - Acculube / Accurate Lubricants & Metalworking

PURITY* FG MFAEROSOL LUBRICANT

IntroductionPetro-Canada’s PURITY* FG MF Aerosol is anadvanced food grade lubricant packaged in aspray can and formulated to deliver superior,longer lasting protection than leading specialtyfood grade lubricants.

PURITY* FG’s superiority results from morethan 25 years formulating experience. Usingthe patented HT purity process, Petro-Canadaproduces a 99.9% pure, crystal clear base oil– the purest in the world. Free of impuritiesthat can hinder performance and fortified withspecially selected performance additives,PURITY* FG MF Aerosol is highly resistant tooxidative breakdown and provides excellentprotection from wear and corrosion. Toughenough to handle wet food processingenvironments, its tacky nature allows it toadhere strongly to metal surfaces, resistingwater washout and water spray loss.

PURITY* FG MF Aerosol also meets thehighest food industry purity standards and fitsperfectly in HACCP (Hazard Analysis andCritical Control Point) and GMP (GoodManufacturing Practice) plans. All of its fluidcomponents comply with FDA regulation21 CFR 178.3570 “Lubricants with incidentalfood contact”. It is H1 registered by NSF andmeets the requirements of the U.S.Department of Agriculture (USDA) as anH1 lubricant for use in federally inspectedmeat and poultry plants where incidental foodcontact may occur. It is approved by theCanadian Food Inspection Agency for use inregistered food processing plants and certifiedkosher and pareve by Star K.

Features and Benefits• Outstanding resistance to oxidative

breakdown

• Keeps systems free of sludge and varnish

• Results in longer fluid life and reduceddowntime even at high temperaturesand in the presence of water and acidiccontamination

• Long-term protection from rust andcorrosion

• Protects chains and metal surfacesfrom rusting

• Excellent wear protection

• Prevents metal-to-metal contactbetween chains and drive sprockets

• Reduces maintenance costs

• Strongly adheres to all surfaces

• Resists throw-off from chains,preventing fluid drips

• Highly resistant to water washoutand spray loss

• Reduces fluid consumption

• Environmentally safe

• Non-ozone depleting propellant (CFC free)

• Comes with an application tube for accuracywhen lubricating hard-to-reach locations

• Fully approved for use in and around foodprocessing areas

• H1 registered by NSF

• All fluids meet the requirements of theU.S. Department of Agriculture (USDA)as H1 lubricants for use in federallyinspected meat and poultry plantswhere incidental food contact may occur

• All fluid components comply with FDA21 CFR 178.3570 “Lubricants withincidental food contact”