q-checker 2.2.0 for catia v6transcat-plm.com/pub/tcsoft/qcheckerv6_220/q-checkerv6...the profile...
TRANSCRIPT
com
pan
y-co
nfi
den
tial
Q-Checker 2.2.0 for CATIA V6 What’s new
com
pan
y-co
nfi
den
tial
Overview
This release contains 49 enhancements in total.
This “What’s new” describes some major changes:
New features in existing criteria
Improvements to existing criteria
New / improved features
Fixed criteria
Fixes
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 2
com
pan
y-co
nfi
den
tial
Support of 3DEXPERIENCE 2015x
Q-Checker is now also available for CATIA 3DEXPERIENCE 2015x.
Enhancement 17061
From 2015x, Q-Checker batch requires an ENOVIA login ticket
instead of username and password.
Enhancement 16949
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 3
com
pan
y-co
nfi
den
tial
New features in existing criteria
Criterion Conditional Feature Properties
Use the new keyword HAS_ATTRIBUTE to detect certain element attributes:
Left-handed axis system
Various kinds of FT&A feature sets
Drawing construction elements
Drawing text elements with/without leader
Enhancements 15298, 16609, 16663, 16691, 16693
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 4
com
pan
y-co
nfi
den
tial
New features in existing criteria
Criterion Conditional Feature Properties
Use the extended MODEL_ATTRIBUTE keyword to check whether the values of
two PLM attributes are identical.
Enhancement 16691
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 5
com
pan
y-co
nfi
den
tial
New features in existing criteria
Criterion Non-Allowed B-Rep/Feature color:
A new parameter has been added to define allowed or non-allowed color ranges.
Previously it was only possible to define non-allowed color ranges.
Enhancement 16522
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 6
com
pan
y-co
nfi
den
tial
New features in existing criteria
Criterion Thread Definition:
The criterion now also checks the thread definition of sheet metal hole features.
Enhancement 16941
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 7
com
pan
y-co
nfi
den
tial
New features in existing criteria
Criterion Conditional Feature Properties:
Use the new keyword HIDDEN to check whether parameters and KWE relations
are hidden. A healing function is available.
Enhancement 13668
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 8
com
pan
y-co
nfi
den
tial
Improvements in existing criteria
The performance of several criteria has been improved:
Criterion Selected Text/Dimension Attributes
Enhancement 16483
Criterion Permitted Text Fonts
Enhancement 16483
Criterion Calculation of Shells/Volumes [G-SH-xx]
Enhancement 16655
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 9
com
pan
y-co
nfi
den
tial
New / improved features
New feature type KweReaction for Knowledgeware Reactions
Included in the Relations element type group
Available in same criteria as the KweAction element type Enhancement 16949
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 10
com
pan
y-co
nfi
den
tial
Fixed criteria
Criterion Unused Solid Construction Geometry
The criterion now ignores user-defined features (UDF).
Previously UDF had been reported as faulty.
Enhancement 16614
Criterion Non-Allowed Input Reference to Vertex/Edge/Face
The criterion now works with CATIA 3DEXPERIENCE 2014x.
This resolves a known bug in Q-Checker 2.1.x for V6 where the criterion never
reported an error.
Enhancement 16467
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 11
com
pan
y-co
nfi
den
tial
Fixed criteria
Criterion Reset Graphic Properties
Entities without graphic properties no longer cause a general error when this
preprocessing is applied.
Enhancement 17162
Criterion Selected Text/Dimension Attributes
The display refreshes automatically after a healing has been applied.
Enhancement 16607
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 12
com
pan
y-co
nfi
den
tial
Fixed criteria
Criterion Embedded Faces [G-FA-EM]
If the option "Check also partially identical" was enabled, a CATIA abort was
caused while checking a specific model.
Enhancement 16787
Criterion Only One Curve in Sketch
In some cases, sketches were no longer up to date after the check run.
Q-Checker has been updated due to a CATIA patch.
Enhancement 17145
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 13
com
pan
y-co
nfi
den
tial
Fixed criteria
Criterion Sketch Not Fully Constrained
If the option “Check also associated geometry” was enabled, a CATIA abort was
caused while checking a specific model.
Enhancement 17273
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 14
com
pan
y-co
nfi
den
tial
Fixes
Automatic conversion of decimal separators
Decimal separators (comma, dot) were not automatically converted when
entering numbers in dialogs.
Enhancement 17049
Feature catalog for internal reports
A wrong feature catalog TCAQCheckerReportCatalog.CATfct had been
included in the previous release. The catalog is required to read and write
internal reports.
Enhancement 17170
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 15
com
pan
y-co
nfi
den
tial
Fixes
Check seal viewer
The check seal for drawings within a product is now visible
in the check seal viewer.
Enhancement 16517
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 16
com
pan
y-co
nfi
den
tial
Fixes
Report file names
Report file names now include the type of model
(Product, 3DPart, Part, Drawing) if the option
"Use model name as report name" is selected.
Enhancement 16517
List of reports in the start window
The list of reports is now available even if the
"Use model name as report name" option is selected.
Enhancement 16583
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 17
com
pan
y-co
nfi
den
tial
Fixes
Report name in Batch Settings dialog
The report name could not be changed although the "Use model name as report
name" option was not selected.
Enhancement 17029
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 18
com
pan
y-co
nfi
den
tial
Fixes
Delete internal reports
The profile option "Delete all previous internal reports" now works correctly.
Previously this option had no effect on some internal reports.
Enhancement 16517
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 19
com
pan
y-co
nfi
den
tial
Fixes
Remove previous check seals
If the check seal option “Remove previous check seals” was enabled,
closing the Q-Checker analysis window had caused a CATIA abort. Enhancement 17048
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 20
com
pan
y-co
nfi
den
tial
Fixes
Model type definition
The TYPE condition now accepts a comma-separated list of types in one line. Enhancement 17162
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 21
com
pan
y-co
nfi
den
tial
Fixes
"Checked models" dialog
Columns are now sortable.
Column widths are now stored in Q-Checker settings.
Wrong sorting by sequence number has been fixed.
Enhancement 16668
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 22
com
pan
y-co
nfi
den
tial
Fixes
Model type configurator
The model type configurator now works for 3DShape.
The “Preselect active model at start” option did not work correctly.
The model type configurator could not distinguish between
Product (parent) and 3DShape (child) component if they had identical names.
Enhancements 17114, 17249, 17251
Q-Checker 2.2.0 for CATIA V6 - What’s new | Transcat PLM GmbH | 2015-09-16 23
com
pan
y-co
nfi
den
tial
For more information, please contact us. [email protected] +49 721 / 97 0 43 - 35