q-checker 5.2.0 for catia v5 what's new -...
TRANSCRIPT
com
pan
y-co
nfi
den
tial
Q-Checker 5.2.0 for CATIA V5 What’s new
com
pan
y-co
nfi
den
tial
Overview
93 improvements have been made overall
This “What’s new” describes some major changes:
New Criteria
New features in existing criteria
New / improved features
Fixes
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 2
com
pan
y-co
nfi
den
tial
New Criteria
New criterion: “Material Thickness Vector
Corresponds to Thick Surface Orientation”
Checks whether
- a point of the specified material vector lies on the
input surface of a thick surface
- and whether the material thickness vector and
the thick surface have the same orientation.
The picture shows the Material Thickness Vector (blue) which is
not normal to the surface, but corresponds to the Material
Orientation (red).
Enhancement 14969
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 3
com
pan
y-co
nfi
den
tial
New Criteria
New criterion: “View Dress-up Properties”
Checks whether the Dress-up properties in generative views
match the specifications
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 4
The picture shows the Dress-up
properties of a generated view
The criterion compares these
properties with those defined in the
check profile
Enhancement 14989
com
pan
y-co
nfi
den
tial
New Criteria
New criterion: “View Generation Mode Options”
Checks whether the Raster properties in generative views
match the specifications
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 5
The picture shows the Raster
properties of a generated view
The criterion compares these
properties with those defined in the
check profile
Enhancement 14989
com
pan
y-co
nfi
den
tial
New Criteria
New criterion: “Parameter Properties”
Checks whether parameters are locked or unlocked.
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 6
The picture shows locked and unlocked
parameter.
The criterion compares the lock status
with the one defined in the check profile
Enhancement 16278
com
pan
y-co
nfi
den
tial
New features in existing criteria
Criteria: “Existence and Text Content of Parameters”
“Existence and Text Content of Parameters in Product”
“Existence and Text Content of Parameters in Part”
“Existence and Text Content of Parameters in Drawing”
New parameter "Mark parameters with <Unset> value as error" Enhancement 14056
Criterion: “Embedded Drawing Elements [G-DW-EM]”
The CAA typs "DrwAxisLine" and "DrwDressUp" have been added Enhancement 15887
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 7
com
pan
y-co
nfi
den
tial
New features in existing criteria
Criterion: “Constraints Referencing the H or V Axis”
Now violated constraints are listed as
sub-elements in the analysis-window Enhancement 16023
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 8
Criterion: “Self-Intersecting Wire [G-CU-IS]”
New option "Ignore intersection points in narrow regions" Enhancement 15971
com
pan
y-co
nfi
den
tial
New features in existing criteria
Criterion: “View Update”
Locked views are now ignored
Generated views with broken links are now ignored Enhancement 15711
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 9
Criterion: “Annotation Content Does Not Correspond to Root Feature
Properties”
In the check profile the option Note name can now be defined as string or
as Regular Expression Enhancement 15613
com
pan
y-co
nfi
den
tial
New features in existing criteria
Criterion: “Non-Allowed Input Reference to Vertex / Edge / Face”
New name: “ Non-Allowed Reference to Vertex
/ Edge / Face as Input for Feature”
New option "Ignore published input elements“
Ignores Planes, Edges and Vertexes that have been published
Enhancement 16028
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 10
Criterion: “CATPart/CATProduct Name linked to View Must Match
CATDrawing Name”
Reports now “Check not called” in case
the Drawing specified in “Drawing name” could not be found Enhancement 16030
com
pan
y-co
nfi
den
tial
New features in existing criteria
Criteria: “Perform CATDUAV5 Clean”
“CATDUAV5”
Rules list has been updated
The list of CATDUA Rules in CATIA >
Tools > Utility > CATDUAV5 changes
with every CATIA Release / Service Pack
The list in Q-Checker is now based on CATIA V5 R21 GA
Enhancement 16383
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 11
Criterion: “Intersection of Solids/Skins”
New name: “Intersection of Solids/Shells” Enhancement 14577
com
pan
y-co
nfi
den
tial
New / improved features
Model types
New keywords “NOT”, “BEGIN” and “END”
New possibilities to define the model type definition
Enhancement 13671
Model Type Configurator
New options:
“Ask before overwriting existing model type parameters”
“Load the model when selecting it”
“Erase modeltype parameters for all environments”
Enhancement 14576, 15676, 14166
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 12
com
pan
y-co
nfi
den
tial
New / improved features
Q-Checker Product Component Check Survey
Model assessment color has been added
Relative links to the report documents
The links still work after the whole report
directory has been moved
Enhancement 15861, 15894
New type
FT&A_ConstructionGeometry
Enhancement 16089
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 13
com
pan
y-co
nfi
den
tial
Fixes
Criterion: “Unused Solid Construction Geometry”
The following sheet-metal elements are now also handled correctly
Mirror, Rectangular pattern, Circular pattern, User pattern
Enhancement 16307
Criterion: “View Outside of Sheet”
Works now correctly in all cases for views with Angle ≠ 0°
Annotations and Dress-up features had caused problems
Enhancement 16212
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 14
com
pan
y-co
nfi
den
tial
Fixes
Criterion: “Calculation of Shells/Volumes [G-SH-xx]”
The option “Topology over more than one Set allowed” works correctly again
An abort was fixed that could occur in rare cases Enhancement 16265, 16002
Criterion: “Non-Allowed Assembly Constraints”
Works now also correctly for “fix-together” constrains Enhancement 15953
Criterion: “Maximum Number of Solid Features per Body”
Works now also correctly for “sketch-based solid features” Enhancement 15771
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 15
com
pan
y-co
nfi
den
tial
Fixes
Criteria: “Permitted Element Types on Layers”
“Elements in SHOW on Layers”
“Elements in NOSHOW on Layers”
“Element Name”
“Conditional Feature Properties”
Elements to be checked “Ignore element selection. Check all elements” works
now correctly
The element selection option "Check only root component of CATProduct"
was in effect although "Ignore element selection“
was selected in the criterion definition.
Enhancement 15899
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 16
com
pan
y-co
nfi
den
tial
Fixes
Criterion: “Annotation Content Does Not Correspond to Root Feature
Properties”
Now also special characters like +,-,\ ,( ),[],… are handled correctly. Enhancement 15594
Element “StructureComponent”
Was erroneously read as "ShapeComponent" Enhancement 16362
Environment keyword "TCAQC_HIDE_TOOLS“
Works correctly again for “ModelTypeConfigurator” Enhancement 16291
Q-Checker 520 for CATIA V5 - What’s new | Transcat PLM GmbH | 2014-04-17 17
com
pan
y-co
nfi
den
tial
For more information, please contact us. [email protected] +49 721 / 97 0 43 - 100