q-checker 5.4.0 for catia v5 what’s new -...
TRANSCRIPT
Q-Checker 5.4.0 for CATIA V5
What’s new
74 improvements have been madeOne new criterion
Several new or improved features
Fixes
2
• CATIA V5-6R2016 (R26)
• Windows 10
Support of
LUM
• Is no longer supported– Use DSLS instead
3
New Criterion: "Draft Definition"
• Checks the
pulling direction option
“Controlled by reference”– Enabled / Disabled
4
Criterion: "Coherence between Product Component Name
and associated File Name"
• New option to
"Check only substring”– Start position and length
• New option to check
"Camera zoom factor range“– In Camera Properties
Criterion: "Capture Definition"
5
• New option to check the
CAA type of the limiting elements– against a list of allowed CAA types
Criterion: " Edge/Variable-Radius/Chordal Fillets Definition "
Criterion: "Existence and Content of Texts"
• New healing option to
"Do not heal text features
with links to parameters“– Healing would cut the link
6
Criterion: "FT/A Types Must Be Assigned to Specific
Captures"
• New healing to
"…create requested capture and
set this camera“– Applies specified viewpoint to the new capture
Criterion: "Instance Name Must Match Part Number"
• New option to
"Check only root component
of CATProducts"
7
Criterion: "Linked/Unlinked Material"
• New option to "Use DLName instead of path“– The allowed catalog path can now be
defined as path or DLName
• New option
"Angular Threshold must be selected“– In addition the numerical value is checked
only in case the Angular Threshold is enabled
Criterion: "Join Definition"
8
Criterion: "Non-Allowed Sketch Constraint Types"
• New type
"CstType_ConcentricByOffset“– Offset applied to a concentricity
• New option to "Ignore capture“– Do not check captures with specified name
(defined by a regular expression)
Criterion: "Occurrences of FT/A Types in Captures"
9
Criteria: "Parameter Not Linked to Text"
"Text Not Linked to Parameter"
• Check now also "FT&A Text" in – CATPart
– CATProduct
• Enhanced options to check a range of– "Main value accuracy"
– "Dual value accuracy"
Criterion: "Non-Standard Display Accuracy of Dimension"
10
Criterion: "Unresolved Feature"
• Checks now also CATDrawings– Only features in the specification tree
(except Sheets and Views) are checked
• New option to
"Ignore measure features“
• Error Fixed– Non-associative measure features
are now ignored
Criteria: "Product/Part Update"
"Perform Product/Part Update"
11
Criterion: "View Outside of Sheet"
• New option to
"Ignore elements with certain names"
• CAA type added to the error message
HTML- and txt-report
• New option to write
sub-items
of violated geometry criteria
12
Type added
• CAA Type: SECTION_RESULT
– “Section”
• Analyze element in CATProduct
Type changed
• CAA Type: CATTPSExtractionView
– "FT&A_Unknown" "FT&A_AlignedView“
• FT&A element in CATPart and CATProduct
• CAA Type: EhiBundelSegmentBody
– "Feature" "Body"
• Electrical element in CATPart
13
Analysis window
• New option in context menu to
“Check all items of the same type”
(as the current one)– e.g. all CATParts
Product-component selection
• Part Publications
are now highlighted
14
Database XML report
• Error fixed– Locally extracted offline licenses
were neglected
Locally extracted offline licenses
• New option to write
DB_customer_info
– Defined in QCHECKER.db
• E.g. qchecker.DB_CUSTOMER_INFO QC_Mtype …
• Error fixed
– Environment variables in QCHECKER.db were neglected
15
Criterion: "View Outside of Sheet"
• Error fixed
– Field "Further rules ..." accepts
now numbers at position 1-3
• E.g. D5I_0
Criterion: "CATDUAV5"
• Error fixed
– In Approximate and Raster views
not all elements were recognized
– For Approximate views
the batch result could be wrong
16
Criterion: "Conditional Feature Properties"
• Error fixed
– Healing is now persistently stored in the CATIA user settings
Criterion: "Display Performance"
• Error fixed
– For ShapeComponents the "Bill of Material" status was neglected
Criterion: "Element Name"
• Error fixed
– Healing did not work for publications in products
17
Criterion: "Non-Allowed Path for Linked Document"
• Error fixed
– Healing did not work in case the option "Ignore fake dimension" is enabled
Criterion: "Non-Standard Display Accuracy of Dimension"
• Error fixed
– For models loaded from VPM_V4 the result was incorrect
Model Type Configurator
• Error fixed
– The filter "Part/Shape" did not work
– In case the CATIA cache is enabled, not all models were listed
18
For more
information,
please
contact us
support.transcat@
techniatranscat.
com