,q wklv grfxphqw«...' o } ow } rswe x } Æ z À ] ] } v í x ì } ( î ì í õ x ì õ x î...
TRANSCRIPT
GlobalProtect-VPN.docx Revision 1.0 as of 2019.09.24 Win10 Page 1 of 11
For assistance please contact the AIMS Help Desk: 608.265.6900, [email protected]
In this document… You will learn how to connect to the UW-Madison Virtual Private Network (VPN) using an application called GlobalProtect. You will also learn how to disconnect from the VPN. Information is also provided for those who would like to use the GlobalProtect VPN for Remote Desktop access.
Table of Contents
HOW TO CONNECT TO GLOBALPROTECT 2
HOW TO DISCONNECT FROM GLOBALPROTECT 5
ADDING THE UWMADISON VPN TO GLOBALPROTECT 7
CONNECT TO YOUR DESKTOP COMPUTER USING REMOTE DESKTOP AND THE GLOBALPROTECT VPN 10
GlobalProtect-VPN.docx Revision 1.0 as of 2019.09.24 Win10 Page 2 of 11
How to Connect to GlobalProtect 1. In the right-hand bottom corner of your home page click on the System Tray, then the
GlobalProtect icon as shown in Figure 1.
Figure 1
2. Click Connect.
Figure 2
GlobalProtect-VPN.docx Revision 1.0 as of 2019.09.24 Win10 Page 3 of 11
3. Type your AIMS username and password. Then click Sign In.
Figure 3
4. Wait for a moment while GlobalProtect connects.
Figure 4
GlobalProtect-VPN.docx Revision 1.0 as of 2019.09.24 Win10 Page 4 of 11
5. The following screen will appear when you have connected. Note also that the icon in the system icon area turns from white to blue.
Figure 5
6. On the Desktop of your computer locate your Map Network Drives icon.
Figure 6
7. Double-click on the Map Network Drives icon and let the program run to map your network drives. Once it’s done you should see a welcome screen as shown in Figure 7.
Figure 7
GlobalProtect-VPN.docx Revision 1.0 as of 2019.09.24 Win10 Page 5 of 11
How to Disconnect from GlobalProtect
1. In the right-hand bottom corner of the desktop, click on the System Tray and then the GlobalProtect.
Figure 8
2. Click Disconnect.
Figure 9
GlobalProtect-VPN.docx Revision 1.0 as of 2019.09.24 Win10 Page 6 of 11
3. When you see the following screen, you have successfully disconnected.
Figure 10
GlobalProtect-VPN.docx Revision 1.0 as of 2019.09.24 Win10 Page 7 of 11
Adding the uwmadison VPN to GlobalProtect This will be necessary if you wish to connect to a PC using Microsoft’s Remote Desktop feature.
1. Open GlobalProtect
2. Click on the gear icon and then click Settings
Figure 11
Figure 12
GlobalProtect-VPN.docx Revision 1.0 as of 2019.09.24 Win10 Page 8 of 11
3. Click Add
Figure 13
4. Type uwmadison.vpn.wisc.edu and click Save
Figure 14
GlobalProtect-VPN.docx Revision 1.0 as of 2019.09.24 Win10 Page 9 of 11
5. Close GlobalProtect
Figure 15
GlobalProtect-VPN.docx Revision 1.0 as of 2019.09.24 Win10 Page 10 of 11
Connect to your desktop computer using Remote Desktop and the GlobalProtect VPN
1. Launch GlobalProtect
2. In the bottom right-hand corner click on the drop-down menu and select uwmadison.vpn.wisc.edu
Figure 16
3. Click Connect
Figure 17
GlobalProtect-VPN.docx Revision 1.0 as of 2019.09.24 Win10 Page 11 of 11
4. Sign in with your NetID username and password
Figure 18
5. Use Remote desktop connection to connect to your desk computer