*OPTIONAL FOR DOUBLE SHOTCAPSULE OPTIONS

Make sure machine is plugged in prior to use and fill water tank.Press the ON/OFF buttonto turn on the machine.

1

Slide the chrome lever back, insertthe capsule and slide the chromelever forward.

Press the desired beverage button, brewing will stop automatically once the preset dose is reached; pressing a button again while brewing will stopthe brewing process.

4

OMNIA

HOT BEVERAGES PREPARATION

3

QUICK START GUIDE

2 Choose the right capsuleaccording withthe desired recipe.

DOUBLE SHOT is availableon Espresso and Milk based beverages selection by pressing the Double Shot button before the desired beverage button and inserting the specific capsule labeled “Espresso x2”.

ESPRESSOESPRESSO,LUNGO orMILK BASEDBEVERAGE

ESPRESSOx2 DOUBLE

SHOT*

CAFFÈ8 OZ. COFFEE

8 OZ.

TEA HOTBEVERAGE

SYSTEM BOOT

SYSTEM BOOT

SYSTEM BOOT

SYSTEM BOOT

SEE OTHER SIDE FOR DAILY CLEANING

DAILY CLEANING

QUICK START GUIDE

Machine’s milk unit must be cleaned at the end of each day.If cleaning missed, the machine will automatically block milk brewing until this has been completed.

Press System Clean buttonand follow steps shownon machine display.

Disassemble the milk unit and clean the parts under running water using the brush provided.

Reassemble the milk unitand place back into machine.

1

4

2

5

3

6Place the milk tube in a container (6 Oz. min.) containing cleaning solution (hot water + milk cleaner). Place an empty glass under the spouts ( 6 Oz. min.). Press OK to confirm and start the cleaning process.

Place the milk tube in a container containing fresh water (6 Oz. min.)to rinse the system and completethe process. Machine is readyto brew your beverage.

OMNIA

SYSTEM BOOT

I) Lower the coffee spoutII) Remove the plastic coverIII) Press the left button on the milk unitIV) Remove the milk unit

II

I

III

IV

SEE OTHER SIDE FOR DAILY CLEANINGSEE OTHER SIDE FOR HOT BEVERAGES PREPARATION