TRAINING REPORT ON:

MICROWAVE TELECOMMUNICATION & SIGNALING AT RAILWAYS 

SITE OF TRAINING : MICROWAVE CENTRE AND SIGNAL WORKSHOP, ZONAL HEAD QUARTER, N.E. RAILWAY,GORAKHPUR 

SUBMITTED BY:- shashikant mechanical engineering

MICROWAVE TELECOMMUNICATION &SIGNALING WORK IN INDIAN RAILWAYS

SUBMITTED TONEERAJ KUMAR

Indian Railway is a department owned and controlled by the Govt.of India,via the Ministry of Railways Indian railway is divided into zones,which are further divided into divisions. Gorakhpur is the zonal headquarter of the North Eastern Railway zone The formal inauguration ceremony of IR was performed on 16th April 1853 with the first passenger train steamed out of Howrah station destined for Hooghly, a distance of 36 km .

INTRODUCTION

It runs 12000 trains every day

It is fuel efficient system

Railways has 7500 engines,38000 coaches & about 2.5 lakh of wagons

7000 stations & about 500 computerized passenger reservation centers 1 lakh km of track

17 lakh employee(10 lakh in Group C) including 10000 officers

CONT…..

PRACTICAL TRAINING UNDER NER We have received the scheduled Summer Practical Training as a part of our curriculum, from 22ndJune, 2011to 19th July, 2011 under Divisional Railway Manager North Eastern Railway, Gorakhpur Ms.Sunita Verma is the General manager, North Eastern Railway and Mr.Vinod Yadav is the DRM of Gorakhpur Division presently. We've studied about the following operational technologies in the IR– Module 1:Railway signaling & Signal workshop Module 2:Microwave communication in Railway

PRINCIPLES OF TRAIN WORKINGAND NEED FOR SIGNALING

All over the world Railway transportation isi ncreasingly used, as this mode of transport is more energy efficient and environmentally friendly than road transportation Trains move on steel rail tracks and wheels of The railway vehicle are also flanged Steel wheels. Hence least friction occurs at the point of contact between the track & wheels Therefore trains carry more loads resulting in higher traffic capacity since trains move on specific tracks called rails, their path is to be fully guided and there is no arrangement of steering.

CONT…. Clear of obstruction as available with road transportation, so there is a need to provide control On the movement of trains in the form of Railway signals which indicate to the drivers to stop or move and also the speed at which they can pass a signal

Since the load carried by the trains and the speed which the trains can attain are high, they need more braking distance before coming to the stop from full speed. Without signal to be available on the route to constantly guide the driver accidents will take place due to collisions

RAILWAY SIGNALLING & SIGNAL WORKSHOP

Signal: signal is a medium to convey a particular predetermined meaning in non-verbal form

Trains uses signaling to control movement of train tracks and divides tracks into several sections which are protected by the signals.

CONT……………. In case of a failurelike a broken wire, rail fracture, power supply failure, failure of the source the detector will lose the signal and conclude the section is occupied by a train. This will allow the detection to maintain safety even under failure condition and satisfy requirments of fail safety Multiple Aspect Color Light Signal (MACLS)Multiple means more than 2 indications. They may have 3 or 4 different aspects or indications to be given to the driver. These signals have longer range of visibility and Improved reliability.        

SIGNAL WORKSHOP In the signal workshop of N.E.Railway, Gorakhpur following machine are manufactured which are used as a part of signaling system-: 1.Electric point machine. 2.Relays Points are provided to divert the running trains one track to another. The points have movable switches which can be operated electrically by a point machine.

SOLID STATE INTERLOCKING Solid State Interlocking is a data-driven signal control system designed for use throughout the British railway system

SSI is a replacement for electromechanical interlockings which are based on highly reliable relay technology SSI is a multicomputer system with two panel processors, a diagnostic processor, and three central interlocking processors which operate in repairable triple modular redundancy

SSI MODEL

MICROWAVE COMMUNICATION The international telecommunications system relies on microwave and satellite links for long-distance international calls

Microwaves are electromagnetic waves whose frequencies range from 1 GHz to 1000 GHz.

There are large number of bands in microwave Region

CONT….. Before the advent of fiber optics, these microwaves formed the heart of the long distance telephone transmission system.

In its simplest form the microwave link can be one hop.

A single hop is typically 30 to 60 km in relatively flat regions for frequencies in the 2 to 8 GHz bands.

A GENERAL MICROWAVE SETUP

MICROWAVE TRANSMITTER AND RECEIVER -:

The voice, video, or data channels are combined by a technique known as multiplexing to produce a BB signal.

This signal is frequency modulated to an IF and then up converted (heterodyned) to the RF for transmission through the atmosphere.

The reverse process occurs at the receiver. The microwave transmission frequencies are within the approximate range 2 to 24 GHz.

ROLE OF MICROWAVES IN PASSENGER RESERVATION SYSTEM -: In PRS,the Gorakhpur Zone is connected to the main server through communication lines and there is the need of non stop working of PRS in Indian Railways otherwise there will be big loss to Indian Railways.

to increase the reliability of PRS, the main server is also connected to the zones through microwave links.In case if there is a failure in the physical mediathen the PRS can be operated by microwave.

APPLICATION OF MICROWAVE IN INDIAN RAILWAYS -:

controlling of trains. to give correct running and stopping information of the trains.

It help the railway staff to communicate for this purpose.

Stations on average of 40 km can communicate with each other by microwave.

THANK YOU