ray-bar engineering corporation

1
TECHNICAL DATA FIRELITE INSULATED GLASS UNITS UL Listed/Classified and permanently labeled, with required hosestream test. Standard stock sizes available up to 48" x 96". Safety Glass available upon request, permanently labeled meeting ANSI Z97.1 and CPSC 16 CFR 1201 Cat II requirements for impact resistance. Safety Glass is required in door vision lites and windows that occur within 24" of a door opening or within 36" of floor. Safety Glass is NOT tempered, impact-proof, shatter proof or scratch resistant. For impact resistance: FIRELITE-NT (filmed) or FIRELITE + PLUS (laminated). Available in IGU for Low-E, Tinted, Reflective, 1-Way Mirror and X-Ray Protective. UL File R38927, Testing to UL 9, UL 10C, NFPA 80, NFPA 252, NFPA 257, CAN4 S-104 and CAN4 S-106. RAY-BAR ENGINEERING CORPORATION 3/16" FIRELITE, 3/16" FIRELITE-NT and 5/16" FIRELITE + PLUS IGUs It is the responsibility of the customer to verify and confirm fire rating requirement prior to ordering. Product Trade Name: FIRELITE IGU For Fire Resistive, Radiant and Conductive Heat Barrier utilize PILKINGTON PYROSTOP Glass (Meeting ASTM E-119 and UL 263). MAXIMUM SHEET SIZE OF ALL FIRELITE PRODUCTS IS 48"X96" Please note the following points. FIRELITE IGU IN WALLS 3/16" FIRELITE 95" 95" 56 1/2" 3,325 2,627 89" 36" 36" 56 1/2" 12" 33" FIRELITE IGU IN DOORS 3/16" FIRELITE-NT 5/16" FIRELITE + PLUS (FILMED) (LAMINATED) 3,204 2,034 100 56 1/2" SIZES IN MAXIMUM VISIBLE EXPOSED AREA LIMITS DAYLIGHT VIEW MAXIMUM SIZE LIMITS SQUARE INCH MAXIMUM CLEAR VIEW MAX. CLEAR VIEW MAX. CLEAR VIEW MAX. CLEAR VIEW MAX. CLEAR VIEW 20 / 45 / 60 MINUTES 90 MINUTES 20 / 45 / 60 MINUTES 90 MINUTES 180 MINUTES R A Y - B A R E N G I N E E R I N G C O R P . U S A RAY-BAR ENGINEERING CORPORATION WWW.RAYBAR.COM PH: (800) 444-9729 E-MAIL: [email protected] FAX: (800) 333-9729 RADIATION FIRE BALLISTICS BLAST LIFE AND SAFETY PRODUCTS "WHEN PROTECTION IN REQUIRED, THERE IS NO SUBSTITUTE FOR SKILL AND EXPERIENCE" © 2019 Ray-Bar Engineering Corporation. * Ray-Bar is a registered trademark of Ray-Bar Engineering Corp. *FireLite and FireLite Plus are registered trademarks of NEG Co, Ltd. * Pilkington Pyrostop is a registered trademark of Pilkington plc. * WireLite and Fireglass are registered trademarks of TGP. * For additional information and details please contact Ray-Bar.

Upload: others

Post on 21-Oct-2021

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: RAY-BAR ENGINEERING CORPORATION

TECHNICAL DATA FIRELITE INSULATED GLASS UNITS

UL Listed/Classified and permanently labeled, with required hosestream test.Standard stock sizes available up to 48" x 96".Safety Glass available upon request, permanently labeled meeting ANSI Z97.1 and CPSC 16 CFR 1201Cat II requirements for impact resistance. Safety Glass is required in door vision lites and windows thatoccur within 24" of a door opening or within 36" of floor. Safety Glass is NOT tempered, impact-proof,shatter proof or scratch resistant.For impact resistance: FIRELITE-NT (filmed) or FIRELITE + PLUS (laminated).Available in IGU for Low-E, Tinted, Reflective, 1-Way Mirror and X-Ray Protective.UL File R38927, Testing to UL 9, UL 10C, NFPA 80, NFPA 252, NFPA 257, CAN4 S-104 and CAN4 S-106.

RAY-BAR ENGINEERING CORPORATION

3/16" FIRELITE, 3/16" FIRELITE-NT and 5/16" FIRELITE + PLUS IGUsIt is the responsibility of the customer to verify and confirm fire rating requirement prior to ordering.

Product Trade Name: FIRELITE IGU

● For Fire Resistive, Radiant and Conductive Heat Barrier utilize PILKINGTON PYROSTOP Glass (Meeting ASTM E-119 and UL 263).

MAXIMUM SHEET SIZE OF ALL FIRELITE PRODUCTS IS 48"X96"

● ● ●

● ● ●

Please note the following points.

FIRELITE IGU IN WALLS3/16" FIRELITE

95"

95"56 1/2"

3,325 2,62789"

36" 36"

56 1/2"

12"

33"

FIRELITE IGU IN DOORS3/16" FIRELITE-NT 5/16" FIRELITE + PLUS

(FILMED) (LAMINATED)

3,204 2,034 10056 1/2"

SIZES IN MAXIMUM VISIBLE EXPOSED AREA LIMITS DAYLIGHT VIEW

MAXIMUM SIZE LIMITS

SQUARE INCHMAXIMUM

CLEARVIEW

MAX.CLEARVIEW

MAX.CLEARVIEW

MAX.CLEARVIEW

MAX.CLEARVIEW

20 / 45 / 60MINUTES

90MINUTES

20 / 45 / 60MINUTES

90MINUTES

180MINUTES

RAY

-BAR

ENGINEER INGCORP

.

U S A

RAY-BAR ENGINEERING CORPORATION WWW.RAYBAR.COM

PH: (800) 444-9729 E-MAIL: [email protected] FAX: (800) 333-9729RADIATION FIRE BALLISTICS BLAST

LIFE AND SAFETY PRODUCTS

"WHEN PROTECTION IN REQUIRED, THERE IS NO SUBSTITUTE FOR SKILL AND EXPERIENCE"© 2019 Ray-Bar Engineering Corporation. * Ray-Bar is a registered trademark of Ray-Bar Engineering Corp. *FireLite and FireLite Plus are registered trademarks of NEG Co, Ltd.

* Pilkington Pyrostop is a registered trademark of Pilkington plc. * WireLite and Fireglass are registered trademarks of TGP. * For additional information and details please contact Ray-Bar.