reflectivestriping
DESCRIPTION
CC14NV JT22CH visit www.vfimagewear.com for Imagine It on-line customization 20 SP24OR • Striping applied post-manufacturing will always go around a pocket or emblem. Pockets cannot be removed for relective trim application. PT18NV See how to order reflective striping - Page 52, Line 10. 21 BSB PLK BSF BLC PLC LSC BLT Reflective Striping Locations visit www.vfimagewear.com for Imagine It on-line customization 22TRANSCRIPT
20 visit www.vfimagewear.com for Imagine It on-line customization
CC14NV
CC14NV(back view)
JT22CH
21
Reflective StripingEnhanced visibility can be critical when working in high traffic areas, on construction sites or around equipment operation. Adding reflective striping to your uniform can make a life saving difference. Select from the many trim widths, colors and placements to make your enhancements have the highest impact. These distinctive stripings can be added to most Red Kap or Bulwark garments. Flame resistant striping is also available. The garments and striping you select should depend on the end use requirements.
See how to order reflective striping - Page 52, Line 10.
PT18NV
SP24OR
The following front and back images on pgs. 22-25 indicate all single reflective stripe locations for most products. With a few exceptions, stripes shown above the waist can be applied to a shirt, jacket or coverall. Stripes shown below the waist can apply to a pant, short, or coverall. The specific details of a garment, like the size of a pocket, the placement of closures, an emblem or an additional pocket, may dictate a slight change in the placement from what is shown in these images.
• Striping applied post-manufacturing will always go around a pocket or emblem. Pockets cannot be removed for relective trim application.
• Stripes on a waistband will be moved up or down if the waistband has elastic sections.
visit www.vfimagewear.com for Imagine It on-line customization22
Reflective Striping LocationsStripeCodes Location Description Front Back
HUF Horizontal Upper Front •
STS Shoulder to Shoulder •
HUB Horizontal Upper Back •
DHB Double Horizontal Back •
BSB Both Sleeves Bicep • •
HUP Horizontal Under Pockets •
LMB Lower Mid Back •
AAC All Around Coverall • •
BSF Both Sleeves Forearms • •
JWB Jacket / Coverall Waistband • •
LSC Long Sleeve Cuff • •
BLT Both Legs Thigh • •
PLK Pant Leg Knee • •
BLC Both Legs Calf • •
PLC Pant Leg Cuff • •
HUF
BSB
BSF
LSC
JWB
HUP
AAC
BLT
PLK
BLC
PLC
STSDHB HUB
LMB
FXB
23See reflective stripe selection in adjacent trim guide, pages 14-19.
Reflective Striping LocationsStripeCodes Location Description Front Back
LST Long Sleeve Shoulder to Cuff • •
FXB Full X Back - OK with suspenders •
VTF Vertical Front •
UPV Under Pocket to Waist •
SSW Side Seam to Waist • •
VTF
UPV
LST
SSW
ANSI Compliant Striping
The stripe configurations shown here are not necessarily ANSI compliant. To provide guidance for the protection of all those exposed to the hazards of limited visibility, the American National Standards Institute, Inc. (ANSI), approved ANSI / SEA 107-2004, the American National Standard for High-Visibility Safety Apparel. ANSI / SEA 107-2004 establishes design, material, photometric and physical performance requirements, care labeling and marking rules for high visibility garments.
End users should conduct a hazard assessment in order to select garments with the proper type, class and design placement for their work environment. Please refer to ANSI / SEA 107-2004 for further information.
CBX
visit www.vfimagewear.com for Imagine It on-line customization
Reflective Striping Locations
StripeCodes Location Description Front Back
SUP Around Waist and 2 pieces Over Shoulders
• •
CBX Center Back X-12" stripes •
SST Short Sleeve to Hem • •
AAS All Around Shirt • •SST
24
SUP AAS
SUP
25
Reflective Striping LocationsStripeCodes Location Description Front Back
SUS Around Waist, 2 pieces Over Shoulders and 2 pieces under pockets
• •
SSC Short Sleeve Cuff • •
SUS
SSC
Reflective Striping PackagesStripeCodes
CWBPackage
DBFPackage
LBFPackage
LCBPackage
LPBPackage
LPFPackage
SBFPackage
SBWPackage
SCBPackage
SPBPackage
SPFPackage
DHB HUB HUF
JWB LSC PLC SSC
See reflective stripe selection in adjacent trim guide, pages 14-19.
15
Reflective Trim:There are several color options and widths of reflective trims that can be selected for attachment to your garments. They are primarily divided into four categories: FR – Industrial Wash, FR – Home Wash, Industrial Wash, and Home Wash. Many stripe styles are available in one or more of these categories, however prices will vary depending on the trim and location selected. Please be sure to select the correct trim.
The codes under each trim indicate the following:1) the activity code2) the VF style number, or component code3) the width of the trim4) the reflectivity grade
Suggested Placements: For the best suggestions regarding reflective trim placements and available packages which include several locations each, see pages 22-25. These placements will accommodate any selected stripe.
For a step-by-step tutorial on our fantastic customization capability, log in to www.vfimagewear.com. You can watch a guided demonstration of the endless customization options available at your fingertips through Imagine It!
14
Reflective Trim
Y1 / EH5203 1" 8987
1N / EH5204 2" 8987
1B / EH5283 2" 8940
O1 / EH5210 1" 8986
FR / IL - (Flame Resistant / Industrial Laundry)
1J / EH3207 2" 8940
S2 / EH5216 2" 8935
FR / HW - (Flame Resistant / Home Wash)
S1 / EH5215 1" 8935
Y3 / EH5207 2" 9587
(NOT shown actual size)
Codes with red symbols indicate that the relective trims are flame resistant.
16
Reflective Trim
1Q / EH5227 2½" 9920
1H / EH5236 1" 9920
IL - (Industrial Laundry)
G2 / EH5225 2" 9920
OV / EH5415 1½" 9920
1E / EH5435 2½" 9920
1K / EH5430 1½" 9920
1P / EH5226 1" 9920
(NOT shown actual size)
NOT AVAILABLE
18
YV / EH5330 1½" 9910
GV / EH0018 1" 9910
1O / EH5224 2" 9910
Reflective Trim
HW - (Home Wash)
(NOT shown actual size)