RELEASE M.14.M Q 1

INDEX SECTION Q:

NEW ITR® UNIK LINE

MATERIAL MECHANICAL PROPERTIES Q4

BUCKET TIP PROFILES EXCAVATORS Q5

BUCKET TIP PROFILES LOADERS Q5

ITR® UNIK TIPS by FAMILY Q6

MACHINE MODELS CAT® STYLE TIPS Q8

ITR ® UNIK TIPS: SUMMARIZING TABLE & CAT® “J” IDENTIFICATION Q9

ITR® UNIK TIPS for EXCAVATOR

ITR® UNIK TIGER LONG TIPS Q10

ITR® UNIK TWIN TIGER LONG TIPS Q11

ITR® UNIK PENETRATION TIPS Q12

ITR® UNIK LONG TIPS Q13

ITR® H/D UNIK LONG TIPS Q14

ITR® UNIK SYMMETRICAL TIPS Q15

ITR® UNIK ROCK CHISEL TIPS Q16

ITR® UNIK ROCK ABRASION TIPS Q17

ITR® UNIK TIPS for LOADER

ITR® UNIK ABRASION PENETRATION TIPS Q18

ITR® UNIK HEAVY DUTY ABRASION TIPS Q18

ITR® UNIK LONG for LOADER TIPS Q19

ITR® UNIK LIP SHROUDS Q20

Q 2 RELEASE M.14.M

RELEASE M.14.M Q 3

NEW ITR ®

UNIK LINE DESIGN IS STUDIED FOR EVERY APPLICATION WHERE HIGH

PENETRATION AND IMPACT ARE REQUESTED.

Excellent digging performance with

innovative and modern self-sharpening

design which improves the productivity

of the machine;

Innovative and reinforced

pocket structure

STANDARD CATERPILLAR ® TIP UNIK ® TIP

Inncreased side pin protection

Special impact resistance

Q 4 RELEASE M.14.M

TYPE of

PRODUCT APPLICATIONS

ITR ®

MATERIAL

Tensile

Strength

(Mpa)

Elongation Resilience

AKV

Resiliance

AKV -40° HRC

SMALL TIP

Below 10 Kg

Good resistance to abrasion and

impact. The characteristics are

maintained even when the part

warms up in working conditionns.

UNC-2 1450 - 1650 ≥ 6 % ≥ 25 J/cm2 ≥ 22,5 J/cm2 48 - 52

MEDIUM TIP

from 10 to 20 Kg

Maximum resistance to abrasion

and impact. The characteristics

are maintained even when the part

warms up in working conditionns.

UNC-4 1450 - 1650 ≥ 6 % ≥ 31 J/cm2 ≥ 22,5 J/cm2 48 - 52

LARGE TIP

Up to 20 Kg

Maximum resistance to abrasion

and impact. The characteristics

are maintained even when the part

warms up in working conditionns.

UNP-4 ≥ 1700 ≥ 3 % ≥ 35 J/cm2 ≥ 28 J/cm2 49 - 54

MATERIAL MECHANICAL PROPERTIESMATERIAL MECHANICAL PROPERTIESMATERIAL MECHANICAL PROPERTIES

RELEASE M.14.M Q 5

UNIK® PROFILE TYPE PICTURE FEATURES and BENEFIT

TIGER Unmatched penetration in frost, rock or hardpan conditions;

Stays sharp.

TWIN TIGER

More penetration longer than TIGER;

Less leverage than TIGER requiring more breckout force from the Excavator.

PENETRATION

Good penetration Tip;

Stays sharp throughout life;

Average wear material;

Good for lightly packed rock shale & clay.

LONG Multi purpose general duty tip;

Good choise for most basic applications;

HEAVY DUTY LONG

More wear material

Use on larger machines in excavation work

Longer wear life and greater strenght than long tip

SYMMETRICAL

Good penetration & digging action in most medium to hard pack conditions;

Vertical rib on both sides manteins sharp point W/ average amount of wear material.

ROCK CHISEL

Best for use on rock or hard ground;

Remains sharp throughout life;

Good leverage takes pressure off machine & bucket improving performance & lifespan.

ROCK ABRASION

Similar to ROCK CHISEL but much more wear material on underside of tip;

Best for use on any high abrasion application.

BUCKET TIP PROFILESBUCKET TIP PROFILESBUCKET TIP PROFILES EXCAVATORSEXCAVATORSEXCAVATORS

UNIK® PROFILE TYPE PICTURE FEATURES and BENEFIT

TIGER Unmatched penetration in frost, rock or hardpan conditions;

Stays sharp.

TWIN TIGER

More penetration longer than TIGER;

Less leverage than TIGER requiring more breckout force from the Excavator.

PENETRATION

Good penetration Tip;

Stays sharp throughout life;

Average wear material;

Good for lightly packed rock shale & clay.

LONG Multi purpose general duty tip;

Good choise for most basic applications;

HEAVY DUTY LONG

More wear material

Use on larger machines in excavation work

Longer wear life and greater strenght than long tip

SYMMETRICAL

Good penetration & digging action in most medium to hard pack conditions;

Vertical rib on both sides manteins sharp point W/ average amount of wear material.

ROCK CHISEL

Best for use on rock or hard ground;

Remains sharp throughout life;

Good leverage takes pressure off machine & bucket improving performance & lifespan.

ROCK ABRASION

Similar to ROCK CHISEL but much more wear material on underside of tip;

Best for use on any high abrasion application.

MOST

Penetrative

LESS

Penetrative

UNIK® PROFILE TYPE PICTURE FEATURES and BENEFIT

ABRASION PENETRATION Tip with much wear material on underside of tip;

Best for use on any high abrasion application.

HEAVY DUTY ABRASION

Similar to Abrasion Penetration; tip with much wear material on underside of tip

Best for use on any high abrasion application.

LONG for LOADER Tip specifically designed for loader applications;

Best for use on abrasion application.

BUCKET TIP PROFILESBUCKET TIP PROFILESBUCKET TIP PROFILES LOADERLOADERLOADER

Q 6 RELEASE M.14.M

ITRITRITR®®® UNIK TIPS by FAMILYUNIK TIPS by FAMILYUNIK TIPS by FAMILY

J200 J225 J250 J300 J350

T I P S T I P S -- E x c a v a t o rE x c a v a t o r

1U3202TLU 6Y3222TLU 1U3252TLU 1U3302TLU 1U3352TLU

- - - 1U3302WTLU 1U3352WTLU

1U3209U - 9J4259U 9J4309U 9J4359U

1U3202U 6Y3222U 1U3252U 1U3302U 1U3352U

1959209U 8E4222U 9N4252U 9N4302U 9N4352U

1U3202SYLU 6Y3222SYLU 1U3252SYLU 1U3302SYLU 1U3352SYLU

1U3202RCU 6Y3222RCU 1U3252RCU 1U3302RCU 1U3352RCU

T I P S T I P S -- L o a d e rL o a d e r

1U3202LU 6Y3222LU 1U3252LU 1U3302LU 1U3352LU

1U3202PTU 6Y3222PTU 1U3252PTU 1U3302PTU 1U3352PTU

8E6208 (STD) 6Y3228 (STD)

1324762 (HD)

9J2258 (STD)

1324763 (HD)

1073308 (STD)

1324766 (HD)

9W2678 (STD)

1140358 (HD)

8E6209 (STD) 8E6259 (STD)

1495733 (HD)

8E6259 (STD)

1495733 (HD)

8E6259 (STD)

1495733 (HD)

8E6359 (STD)

1140359 (HD)

A D A P T E R SA D A P T E R S

4T1204 [13~25] - 1U1254 [19~32] 1U1304 [25~38] 1U1354 [32~45]

8J7525 [13~19] - 3G0169 [25~32] 9J8929 [25~32]

1U1350 (C) [32~45] 1U1351 (R) [32~45] 1U1352 (L) [32~45]

1193205 (C) [22]

1193204 (C) [27]

6Y3224 (C) [23]

6Y3224A (C) [27] 1193253 (C) [27]

9W1304 (C) [34] 8E9490

(C) [38]

3G6304 (C) [33]

3G6305 (R) [33]

3G6306 (L) [33]

3G8354 (C) [43] 3G8355

(R) [43]

3G8356 (L) [43]

6I6354 (C) [43]

6I6355 (R) [43]

6I6356 (L) [43]

- - - -

1359354 (C) [43]

1359355 (R) [43] 1359356 (L) [43]

8E2184 [22]

9J4207 [20] - 1U0257 [27]

3G9307 [32]

4T4307 [33]

3G3357 [41]

1U1357 [47]

- - - 3G5307 [32] 3G1357 [34]

3G2357 [45]

1U2208 (L) [22]

1U2209 (R) [22] -

3G4258 (L) [27]

3G4259 (R) [27]

3G4308 (L) [33]

3G4309 (R) [33]

3G5358 (L) [43]

3G5359 (R) [43]

- - 6I9250 (L) [27]

6I9251(R) [27]

8E5308 (L) [33]

8E5309(R) [33]

8E5358 (L) [32~38]

8E5359 (R) [32~38]

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

Excavator

Loader

(C) Centre; (R) Right; (L) Left.

[…]: Adapter GAP [mm]

RELEASE M.14.M Q 7

J400 J450/J460 J550 J600 J700 J800

T I P S T I P S -- E x c a v a t o rE x c a v a t o r

7T3402TLU 1U3452TLU 9W8552TLU 6I6602TLU 4T4702TLU -

7T3402WTLU 1U3452WTLU 9W8552WTLU 6I6602WTLU - -

6Y7409U 9W8459U 9W8559U 7I7609U 4T4709U -

7T3402U 9W8452U 9W8552U 6I6602U 4T4702U 6I8802U

8E4402U 9N4452U 9N4552U 7Y0602U - -

7T3402SYLU 9W8452SYLU 9W8552SYLU 6I6602SYLU - -

7T3402RCU 1U3452RCU 1U3552RCU 6I6602RCU 4T4702RCU -

- - - 1359600CEU 1359700CEU 1359800CEU

T I P S T I P S -- L o a d e rL o a d e r

7T3402LU - - - - -

7T3402PTU 9W8452PTU 9W8552PTU 6I6602PTU 4T4703PTU 6I8802PTU

- - - - - 6I8803U

7T3408 (STD)

1167408 (HD)

6Y2527 (STD-J450)

8E0468(STD-J460)

1140468 (HD-J460)

6Y8558 (STD)

1073378 (HD)

6I6608 (STD)

1139608 (HD)

4T4708 (STD)

1134708 (HD) 1341808 (HD)

8E8409 (STD)

1167409 (HD)

8E6359 (STD-J450)

8E8469 (STD-J460)

1073469 (HD-J460)

8E5559 (STD)

1078559 (HD)

6I6609 (STD)

1139609 (HD)

4T4707 (STD)

1134709 (HD) 1341809 (HD)

A D A P T E R SA D A P T E R S

- **8E0464 [45~51] - - - -

6I6404 (C) [50]

6I6405 (R) [50]

6I6406 (L) [50]

1590464 (C) [54]

1590465 (R) [54]

1590466 (L) [54]

6I6554 (C) [63]

6I6555 (R) [63]

6I6556 (L) [63]

6I6604 (C) [82]

6I6605 (R) [82]

6I6606 (L) [82]

UEAJ70.80E [80]

UEAJ70.90E [90]

UEAJ70.100E [100]

UEAJ80.100E [100]

1258404 (C) [48]

1140464 (C) [51]

1140465 (R) [51]

1140466 (L) [51]

1073554 (C) [67]

1073555 (R) [67]

1073556 (L) [67]

6I8604 (C) [75]

(1198604)

1324704 (C) [82]

1007416 (C) [103]

1711704 (C) [80]

6I8804 (C) [105]

6I9898 [48] - - - - -

6I8244 (L) [48] 6I8243 (R) [48]

- - - - -

ITRITRITR®®® UNIK TIPS by FAMILYUNIK TIPS by FAMILYUNIK TIPS by FAMILY

Excavator

Loader

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

(C) Centre; (R) Right; (L) Left.

[…]: Adapter GAP [mm]

Q 8 RELEASE M.14.M

MACHINE MODELSMACHINE MODELSMACHINE MODELS

CATCATCAT®®® STYLE TIPSSTYLE TIPSSTYLE TIPS

SIZE MACHINE MODELS

J200 215, 219, 416, 426, 428, 436, 910, 931, 935, 307, IT12

J225 446, 307, 933, 938, 939, 914G, E70, E70B

J250 916 THRU 920, 922, 924, 926, 930, 935, 936, 939, 941, 943, 950, 951, 953, 983, 205 THRU 241, 225

229, 311, 312, 320, IT1, IT18, IT28

J300 615, J619, J621, 623, 950, 955, 960, 963, 953B THRU 966, 980, 983, 988, 992, E180, 215, 219, 235

205 THRU 214, 315, 320, 322

J350 633, 639, 960, 963, 966B, 966D, 966E, 966F, 973, 977, 980, 980B, 980C, E180, E240, 213B, 214B

215 THRU 229, 320, 245, 318, 322, 325, 330, IT1

J400 231D, 980,980C, 980G, 322, 325, 330

J450/J460 966D, 973, 980, 980C, 983, 988, 988B, 988G/H, 225, E300(D/E/F), 235, 235FS, 325, 330, 345, 350

J550 235, 245, 245FS, 350, 375, 5130, 983, 988, 988B, 990, 992, 992B, 992C, 992G

J600 990, 992, 992G, 375, 5080, 5110B

J600 990, 992, 992G, 375, 5080, 5110B

J700 990, 992, 992C, 992G, 994, 375, 5080

J800 385 (JB), 994

RELEASE M.14.M Q 9

ITR ITR ITR ® ® ®

UNIK TIPS:UNIK TIPS:UNIK TIPS: SUMMARIZING TABLESUMMARIZING TABLESUMMARIZING TABLE

EXCAVATOR LOADER

SIZE UNIK

Tiger Long

UNIK

Twin Tiger

Long

UNIK

Penetration

UNIK

Long

UNIK

Symmetrical

UNIK

Rock Chisel

UNIK

Rock Abrasion

UNIK

Abrasion

Penetration

UNIK

Long for

Loader

UNIK

Heavy Duty

Penetration

UNIK

HD Long

J200 1U3202TLU - - 1U3202U 1U3202SYLU 1U3202RCU - 1U3202PTU - - 1959209U

J225 6Y3222TLU - - 6Y3222U 6Y3222SYLU 6Y3222RCU - 6Y3222PTU - - 8E4222U

J250 1U3252TLU - - 1U3252U 1U3252SYLU 1U3252RCU - 1U3252PTU - - 9N4252U

J300 1U3302TLU 1U3302WTLU 9J4309U 1U3302U 1U3302SYLU 1U3302RCU - 1U3302PTU 1U3302LU - 9N4302U

J350 1U3352TLU 1U3352WTLU 9J4359U 1U3352U 1U3352SYLU 1U3352RCU - 1U3352PTU 1U3352LU - 9N4352U

J400 7T3402TLU 7T3402WTLU 6Y7409U 7T3402U 7T3402SYLU 7T3402RCU - 7T3402PTU - - 8E4402U

J450/J460

1U3452TLU 1U3452WTLU 9W8459U 9W8452U 9W8452SYLU 1U3452RCU - 9W8452PTU - - 9N4452U

J550 9W8552TLU 9W8552WTLU 9W8559U 9W8552U 9W8552SYLU 1U3552RCU - 9W8552PTU - - 9N4552U

J600 6I6602TLU 6I6602WTLU 7I7609U 6I6602U 6I6602SYLU 6I6602RCU 1359600CEU 6I6602PTU - - 7Y0602U

J700 4T4702TLU - 4T4709U 4T4702U - 4T4702RCU 1359700CEU 4T4703PTU - - -

J800 - - - 6I8802U - - 1359800CEU 6I8802PTU - 6I8803U -

“J” IDENTIFICATION FAMILY

CORRESPONDING DIMENSIONS: K

J200 51 mm

J225 56 mm

J250 63,5 mm

J300 76 mm

J350 89 mm

J400 101,6 mm

J450 114 mm

J550 140 mm

J600 152 mm

J700 178 mm

J800 203 mm

CATCATCAT®®® “““JJJ” IDENTIFICATION ” IDENTIFICATION ” IDENTIFICATION

Q 10 RELEASE M.14.M

ITR®

UNIK TIGER LONG TIPS DENTI UNIK TIGER LONG TIPO ITR®

DIENTES TIGER LONG DE TIPO ITR®

DENTS UNIK TIGER LONG TYPE ITR®

UNIK TIGER LONG ZAHNEN TYP ITR®

PART No. A B C D

Kg.

CATERPILLAR®

CORRESPONDING

SIZE (mm.)

1U3202TLU 165 6 65 57 1,3 8E6208 (STD) 8E6209 (STD) J200

6Y3222TLU 200 7 84 69 2,3 6Y3228 (STD)

1324762 (HD)

8E6259 (STD)

1495733 (HD) J225

1U3252TLU 215 9 95 78 3 9J2258 (STD)

1324763 (HD)

8E6259 (STD)

1495733 (HD) J250

1U3302TLU 240 10 111 93 4,4 1073308 (STD)

1324766 (HD)

8E6259 (STD)

1495733 (HD) J300

1U3352TLU 286 12 122 106 6,8 9W2678 (STD)

1140358 (HD)

8E6359 (STD)

1140359 (HD) J350

7T3402TLU 318 14 141 127 10,6 7T3408 (STD)

1167408 (HD)

8E8409 (STD)

1167409 (HD) J400

1U3452TLU 360 13 144 140 14,5 6Y2527 (STD-J450)

8E0468 (STD-J460)

1140468 (HD-J460)

8E6359 (STD-J450)

8E8469 (STD-J450)

1073469 (HD-J460)

J450

J460

9W8552TLU 381 15 162 160 18,2 6Y8558 (STD)

1073378 (HD)

8E5559 (STD)

1078559 (HD) J550

6I6602TLU 457 18 198 202 36 6I6608 (STD)

1139608 (HD)

6I6609 (STD)

1139609 (HD) J600

4T4702TLU 483 20 212 205 40 4T4708 (STD)

1134708 (HD)

4T4707 (STD)

1134709 (HD) J700

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

RELEASE M.14.M Q 11

ITR®

UNIK TWIN TIGER LONG TIPS DENTI UNIK TWIN TIGER LONG TIPO ITR®

DIENTES UNIK TWIN TIGER LONG DE TIPO ITR®

DENTS UNIK TWIN TIGER LONG TYPE ITR®

UNIK TWIN TIGER LONG ZAHNEN TYP ITR®

PART No. A B C D

Kg.

CATERPILLAR®

CORRESPONDING

SIZE (mm.)

1U3302WTLU 243 102 110 88 5 1073308 (STD)

1324766 (HD)

8E6259 (STD)

1495733 (HD) J300

1U3352WTLU 286 121 117 104 7,5 9W2678 (STD)

1140358 (HD)

8E6359 (STD)

1140359 (HD) J350

7T3402WTLU 318 141 132 122 11,8 7T3408 (STD)

1167408 (HD)

8E8409 (STD)

1167409 (HD) J400

1U3452WTLU 331 182 150 146 15,2 6Y2527 (STD-J450)

8E0468 (STD-J460)

1140468 (HD-J460)

8E6359 (STD-J450)

8E8469 (STD-J450)

1073469 (HD-J460)

J450

J460

9W8552WTLU 381 184 155 160 19,6 6Y8558 (STD)

1073378 (HD)

8E5559 (STD)

1078559 (HD) J550

6I6602WTLU 457 235 190 200 37,6 6I6608 (STD)

1139608 (HD)

6I6609 (STD)

1139609 (HD) J600

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

Q 12 RELEASE M.14.M

ITR®

UNIK PENETRATION TIPS DENTI UNIK PENETRATION TIPO ITR®

DIENTES UNIK PENETRATION DE TIPO ITR®

DENTS UNIK PENETRATION TYPE ITR®

UNIK PENETRATION ZAHNEN TYP ITR®

PART No. A B C D

Kg.

CATERPILLAR®

CORRESPONDING

SIZE (mm.)

1U3209U 150 18 63 56 1,1 8E6208 (STD) 8E6209 (STD) J200

9J4259U 190 25 92 80 3 9J2258 (STD)

1324763 (HD)

8E6259 (STD)

1495733 (HD) J250

9J4309U 218 27 106 90 4,4 1073308 (STD)

1324766 (HD)

8E6259 (STD)

1495733 (HD) J300

9J4359U 239 34 116 104 5,8 9W2678 (STD)

1140358 (HD)

8E6359 (STD)

1140359 (HD) J350

6Y7409U 265 35 135 123 9 7T3408 (STD)

1167408 (HD)

8E8409 (STD)

1167409 (HD) J400

9W8459U 317 39 139 142 12,3 6Y2527 (STD-J450)

8E0468 (STD-J460)

1140468 (HD-J460)

8E6359 (STD-J450)

8E8469 (STD-J460)

1073469 (HD-J460)

J450

J460

9W8559U 330 52 150 162 16,2 6Y8558 (STD)

1073378 (HD)

8E5559 (STD)

1078559 (HD) J550

7I7609U 410 62 192 200 34 6I6608 (STD)

1139608 (HD)

6I6609 (STD)

1139609 (HD) J600

4T4709U 419 64 216 220 41,5 4T4708 (STD)

1134708 (HD)

4T4707 (STD)

1134709 (HD) J700

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

RELEASE M.14.M Q 13

ITR®

UNIK LONG TIPS DENTI UNIK LONG TIPO ITR®

DIENTES UNIK LONG DE TIPO ITR®

DENTS UNIK LONG TYPE ITR®

UNIK LONG ZAHNEN TYP ITR®

PART No. A B C D

Kg.

CATERPILLAR®

CORRESPONDING

SIZE (mm.)

1U3202U 146 36 67 63 1,2 8E6208 (STD) 8E6209 (STD) J200

6Y3222U 168 46 85 75 2,4 6Y3228 (STD)

1324762 (HD)

8E6259 (STD)

1495733 (HD) J225

1U3252U 192 49 91 81 2,8 9J2258 (STD)

1324763 (HD)

8E6259 (STD)

1495733 (HD) J250

1U3302U 214 56 103 93 4,4 1073308 (STD)

1324766 (HD)

8E6259 (STD)

1495733 (HD) J300

1U3352U 246 63 115 109 6,8 9W2678 (STD)

1140358 (HD)

8E6359 (STD)

1140359 (HD) J350

7T3402U 273 74 134 126 10,5 7T3408 (STD)

1167408 (HD)

8E8409 (STD)

1167409 (HD) J400

9W8452U 294 82 139 142 12,4 6Y2527 (STD-J450)

8E0468 (STD-J460)

1140468 (HD-J460)

8E6359 (STD-J450)

8E8469 (STD-J460)

1073469 (HD-J460)

J450

J460

9W8552U 336 101 154 165 19 6Y8558 (STD)

1073378 (HD)

8E5559 (STD)

1078559 (HD) J550

6I6602U 393 127 186 207 36,4 6I6608 (STD)

1139608 (HD)

6I6609 (STD)

1139609 (HD) J600

4T4702U 418 140 212 211 44,8 4T4708 (STD)

1134708 (HD)

4T4707 (STD)

1134709 (HD) J700

6I8802U 490 167 262 259 85 1341808 (HD) 1341809 (HD) J800

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

Q 14 RELEASE M.14.M

ITR®

H/D UNIK LONG TIPS DENTI H/D UNIK LONG TIPO ITR®

DIENTES H/D UNIK LONG DE TIPO ITR®

DENTS H/D UNIK LONG TYPE ITR®

H/D UNIK LONG ZAHNEN TYP ITR®

PART No. A B C D

Kg.

CATERPILLAR®

CORRESPONDING

SIZE (mm.)

1959209U 148 45 62 54 1,6 8E6208 (STD) 8E6209 (STD) J200

8E4222U 178 54 77 69 2,8 6Y3228 (STD)

1324762 (HD)

8E6259 (STD)

1495733 (HD) J225

9N4252U 200 61 94 82 4,7 9J2258 (STD)

1324763 (HD)

8E6259 (STD)

1495733 (HD) J250

9N4302U 223 69 101 91 5,9 1073308 (STD)

1324766 (HD)

8E6259 (STD)

1495733 (HD) J300

9N4352U 253 82 115 105 9 9W2678 (STD)

1140358 (HD)

8E6359 (STD)

1140359 (HD) J350

8E4402U 278 95 125 120 12,3 7T3408 (STD)

1167408 (HD)

8E8409 (STD)

1167409 (HD) J400

9N4452U 310 114 138 136 18 6Y2527 (STD-J450)

8E0468 (STD-J460)

1140468 (HD-J460)

8E6359 (STD-J450)

8E8469 (STD-J460)

1073469 (HD-J460)

J450

J460

9N4552U 350 131 153 163 27,6 6Y8558 (STD)

1073378 (HD)

8E5559 (STD)

1078559 (HD) J550

7Y0602U 415 151 184 191 45,4 6I6608 (STD)

1139608 (HD)

6I6609 (STD)

1139609 (HD) J600

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

RELEASE M.14.M Q 15

ITR®

UNIK SYMMETRICAL TIPS DENTI UNIK SYMMETRICAL TIPO ITR®

DIENTES UNIK SYMMETRICAL DE TIPO ITR®

DENTS UNIK SYMMETRICAL TYPE ITR®

UNIK SYMMETRICAL ZAHNEN TYP ITR®

PART No. A B C D

Kg.

CATERPILLAR®

CORRESPONDING

SIZE (mm.)

1U3202SYLU 156 60 67 60 1,5 8E6208 (STD) 8E6209 (STD) J200

6Y3222SYLU 185 72 85 72 2,7 6Y3228 (STD)

1324762 (HD)

8E6259 (STD)

1495733 (HD) J225

1U3252SYLU 200 78 98 83 4 9J2258 (STD)

1324763 (HD)

8E6259 (STD)

1495733 (HD) J250

1U3302SYLU 235 90 112 97 5,4 1073308 (STD)

1324766 (HD)

8E6259 (STD)

1495733 (HD) J300

1U3352SYLU 267 105 117 108 7,7 9W2678 (STD)

1140358 (HD)

8E6359 (STD)

1140359 (HD) J350

7T3402SYLU 300 120 134 124 11,6 7T3408 (STD)

1167408 (HD)

8E8409 (STD)

1167409 (HD) J400

9W8452SYLU 324 130 145 142 15,4 6Y2527 (STD-J450)

8E0468 (STD-J460)

1140468 (HD-J460)

8E6359 (STD-J450)

8E8469 (STD-J460)

1073469 (HD-J460)

J450

J460

9W8552SYLU 369 153 155 165 23.2 6Y8558 (STD)

1073378 (HD)

8E5559 (STD)

1078559 (HD) J550

6I6602SYLU 419 190 190 200 37,5 6I6608 (STD)

1139608 (HD)

6I6609 (STD)

1139609 (HD) J600

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

Q 16 RELEASE M.14.M

ITR®

UNIK ROCK CHISEL TIPS DENTI UNIK ROCK CHISEL TIPO ITR®

DIENTES UNIK ROCK CHISEL DE TIPO ITR®

DENTS UNIK ROCK CHISEL TYPE ITR®

UNIK ROCK CHISEL ZAHNEN TYP ITR®

PART No. A B C D

Kg.

CATERPILLAR®

CORRESPONDING

SIZE (mm.)

1U3202RCU 165 42 64 59 1,5 8E6208 (STD) 8E6209 (STD) J200

6Y3222RCU 200 50 82 71 2,7 6Y3228 (STD)

1324762 (HD)

8E6259 (STD)

1495733 (HD) J225

1U3252RCU 220 60 93 80 3,5 9J2258 (STD)

1324763 (HD)

8E6259 (STD)

1495733 (HD) J250

1U3302RCU 250 72 105 92 5,5 1073308 (STD)

1324766 (HD)

8E6259 (STD)

1495733 (HD) J300

1U3352RCU 275 85 117 108 8,2 9W2678 (STD)

1140358 (HD)

8E6359 (STD)

1140359 (HD) J350

7T3402RCU 300 100 130 124 11,2 7T3408 (STD)

1167408 (HD)

8E8409 (STD)

1167409 (HD) J400

1U3452RCU 328 105 146 142 14 6Y2527 (STD-J450)

8E0468 (STD-J460)

1140468 (HD-J460)

8E6359 (STD-J450)

8E8469 (STD-J460)

1073469 (HD-J460)

J450

J460

1U3552RCU 380 130 155 163 22,5 6Y8558 (STD)

1073378 (HD)

8E5559 (STD)

1078559 (HD) J550

6I6602RCU 440 160 188 194 37,7 6I6608 (STD)

1139608 (HD)

6I6609 (STD)

1139609 (HD) J600

4T4702RCU 480 166 211 218 51 4T4708 (STD)

1134708 (HD)

4T4707 (STD)

1134709 (HD) J700

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

RELEASE M.14.M Q 17

ITR®

UNIK ROCK ABRASION TIPS DENTI UNIK ROCK ABRASION TIPO ITR®

DIENTES UNIK ROCK ABRASION DE TIPO ITR®

DENTS UNIK ROCK ABRASION TYPE ITR®

UNIK ROCK ABRASION ZAHNEN TYP ITR®

PART No. A B C D

Kg.

CATERPILLAR®

CORRESPONDING

SIZE (mm.)

1359600CEU 460 155 190 194 50 6I6608 (STD)

1139608 (HD)

6I6609 (STD)

1139609 (HD) J600

1359700CEU 500 172 210 215 68 4T4708 (STD)

1134708 (HD)

4T4707 (STD)

1134709 (HD) J700

1359800CEU 505 212 264 264 88 1341808 (HD) 1341809 (HD) J800

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

Q 18 RELEASE M.14.M

ITR®

UNIK ABRASION PENETRATION TIPS DENTI UNIK ABRASION PENETRATION TIPO ITR®

DIENTES UNIK ABRASION PENETRATION DE TIPO ITR®

DENTS UNIK ABRASION PENETRATION TYPE ITR®

UNIK ABRASION PENETRATION ZAHNEN TYP ITR®

PART No. A B C D

Kg.

CATERPILLAR®

CORRESPONDING

SIZE (mm.)

1U3202PTU (Abrasion Penetration)

168 46 71 62 1,8 8E6208 (STD) 8E6209 (STD) J200

6Y3222PTU (Abrasion Penetration)

205 56 88 73 3,3 6Y3228 (STD)

1324762 (HD)

8E6259 (STD)

1495733 (HD) J225

1U3252PTU (Abrasion Penetration)

220 64 100 82 4,7 9J2258 (STD)

1324763 (HD)

8E6259 (STD)

1495733 (HD) J250

1U3302PTU (Abrasion Penetration)

260 78 114 99 8 1073308 (STD)

1324766 (HD)

8E6259 (STD)

1495733 (HD) J300

1U3352PTU (Abrasion Penetration)

291 89 129 114 11,6 9W2678 (STD)

1140358 (HD)

8E6359 (STD)

1140359 (HD) J350

7T3402PTU (Abrasion Penetration)

330 104 141 134 16,7 7T3408 (STD)

1167408 (HD)

8E8409 (STD)

1167409 (HD) J400

9W8452PTU (Abrasion Penetration)

350 114 152 147 21

6Y2527 (STD-J450)

8E0468 (STD-J460)

1140468 (HD-J460)

8E6359 (STD-J450)

8E8469 (STD-J450)

1073469 (HD-J460)

J450

J460

9W8552PTU (Abrasion Penetration)

385 140 172 172 30,6 6Y8558 (STD)

1073378 (HD)

8E5559 (STD)

1078559 (HD) J550

6I6602PTU (Abrasion Penetration)

450 164 209 208 52,7 6I6608 (STD)

1139608 (HD)

6I6609 (STD)

1139609 (HD) J600

4T4703PTU (Abrasion Penetration)

490 176 228 223 68,6 4T4708 (STD)

1134708 (HD)

4T4707 (STD)

1134709 (HD) J700

6I8802PTU (Abrasion Penetration)

505 212 254 250 93 1341808 (HD) 1341809 (HD) J800

6I8803U (Heavy Duty Abrasion)

475 256 248 256 111 1341808 (HD) 1341809 (HD) J800

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

TIP UNIK Abrasion Penetration

TIP UNIK Abrasion Penetration

TIP UNIK Heavy Duty Abrasion

TIP UNIK Heavy Duty Abrasion

RELEASE M.14.M Q 19

ITR®

UNIK LONG for LOADER TIPS DENTI UNIK LONG for LOADER TIPO ITR®

DIENTES UNIK LONG for LOADER DE TIPO ITR®

DENTS UNIK LONG for LOADER TYPE ITR®

UNIK LONG for LOADER ZAHNEN TYP ITR®

PART No. A B C D

Kg.

CATERPILLAR®

CORRESPONDING

SIZE (mm.)

1U3202LU 161 61 68 60 1,7 8E6208 (STD) 8E6209 (STD) J200

6Y3222LU 180 72 84 74 2,7 6Y3228 (STD)

1324762 (HD)

8E6259 (STD)

1495733 (HD) J225

1U3252LU 200 78 94 76 3,4 9J2258 (STD)

1324763 (HD)

8E6259 (STD)

1495733 (HD) J250

1U3302LU 230 90 104 90 5,5 1073308 (STD)

1324766 (HD)

8E6259 (STD)

1495733 (HD) J300

1U3352LU 254 105 119 106 8,3 9W2678 (STD)

1140358 (HD)

8E6359 (STD)

1140359 (HD) J350

7T3402LU 295 120 134 126 12,5 7T3408 (STD)

1167408 (HD)

8E8409 (STD)

1167409 (HD) J400

*: Caterpillar is a registered trademark of Caterpillar Corp. and is used exclusively for reference purposes.

Q 20 RELEASE M.14.M

ITR®

UNIK LIP SHROUDS UNIK LIP SHROUD TIPO ITR®

UNIK LIP SHROUD DE TIPO ITR®

UNIK LIP SHROUD TYPE ITR®

UNIK LIP SHROUD TYP ITR®

PART

NUMBER Description

A

(mm)

B

(mm)

B’

(mm)

C

(mm)

C’

(mm) E(°)

(mm)

Weight

(Kg)

UELS50 Lip Shroud

(Centre) 150 205 - 45 76 23

40 - 50

6,5

UELS50LH Lip Shroud

(Left) 150 235 39 45 78 23 7

UELS50RH Lip Shroud

(Right) 150 235 39 45 78 23 7

UELS60 Lip Shroud

(Centre) 250 276 - 56 100 23

60

20

UELS60LH Lip Shroud

(Left) 250 309 67 56 105 23 21

UELS60RH Lip Shroud

(Right) 250 309 67 56 105 23 21

UELS70 Lip Shroud

(Centre) 250 276 - 65 110 23 20,5

70 - 75 UELS70LH Lip Shroud

(Left) 250 309 67 65 114 23 21

UELS70RH Lip Shroud

(Right) 250 309 67 65 114 23 21

Lip Shroud

Lip Shroud (Centre) Lip Shroud (Left) Lip Shroud (Right)

RELEASE M.14.M Q 21

ITR®

UNIK LIP SHROUDS UNIK LIP SHROUD TIPO ITR®

UNIK LIP SHROUD DE TIPO ITR®

UNIK LIP SHROUD TYPE ITR®

UNIK LIP SHROUD TYP ITR®

PART

NUMBER Description

A

(mm)

B

(mm)

B’

(mm)

C

(mm)

C’

(mm) E(°)

(mm)

Weight

(Kg)

UELS90E Lip Shroud

(Centre) 362 270 - 95 157 30

80 - 100

36

UELS90ELH Lip Shroud

(Left) 362 324 97 95 159 30 40

UELS90ERH Lip Shroud

(Right) 362 324 97 95 159 30 40

UELS90 Lip Shroud

(Centre) 362 270 - 95 145 35

80 - 100

35

UELS90LH Lip Shroud

(Left) 362 324 97 95 145 35 37

UELS90RH Lip Shroud

(Right) 362 324 97 95 145 35 37

UELS120 Lip Shroud

(Centre) 321 322 - 99 160 30 43

120 UELS120LH Lip Shroud

(Left) 321 369,5 86 99 160 30 43

UELS120RH Lip Shroud

(Right) 321 369,5 86 99 160 30 43

Lip Shroud

Lip Shroud (Centre) Lip Shroud (Left) Lip Shroud (Right)