remodel / resurface. manufacturers recommendations remove all horizontal flooring, wood, composite...
TRANSCRIPT
![Page 1: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/1.jpg)
Remodel / Resurface
![Page 2: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/2.jpg)
Remodel / Resurface
Manufacturer’s Recommendations• Remove all horizontal flooring, wood, composite lumber, etc.
from existing deck.
• CAUTION: Have a qualified person inspect all footings and joists. (See www.NADRA.org for checklist.)
• CAUTION: Make sure the ledger board is bolted or all-thread bolted all the way through the box beam on house.
• The manufacturer recommends footings 6 ft. on center and floor joists 16 in. on center.
![Page 3: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/3.jpg)
Remodel / Resurface
Instructions for Adding Silca GrateTM to an Existing Deck Structure
![Page 4: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/4.jpg)
Remodel / Resurface
• Establish finished floor elevation.
• Determine thickness of deck material choice.
Preparation
![Page 5: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/5.jpg)
Remodel / Resurface
• Establish finished floor elevation. - Allow for existing constraints such as doorway thresholds.
Preparation
![Page 6: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/6.jpg)
Remodel / Resurface
• Make plan of layout and pattern of deck materials (i.e. Natural stone, paver stone, brick or tile).
Preparation
![Page 7: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/7.jpg)
Remodel / Resurface
• Natural stone, pavers, tile, etc.• Wrap rim joist with aluminum or vinyl• Fascia board (various materials)
Choose From 3 Border Types
BrickBrick
Fasciaboard
End of Joist (Front) View
![Page 8: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/8.jpg)
Remodel / Resurface
Deck Construction• Make plan of layout and pattern of deck materials (i.e. Natural
stone, paver stone, brick or tile).• Add 2x4 cleats on to both sides (except the exterior of the fascia
boards) of joists 1-1/2” below the top surface of the joists.
![Page 9: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/9.jpg)
Remodel / Resurface
Cut Silca GratesTM to Fit Between Joists
Note: Silca GratesTM have 2sets of 3 screw holes on oneside and 1 set of 3 on theother. Cut to width on the2-set side.
![Page 10: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/10.jpg)
Remodel / Resurface
Silca GrateTM Orientation• Before placing Silca GrateTM on deck joists be sure
reinforcement straps face down.
NOYES
![Page 11: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/11.jpg)
Remodel / Resurface
Place Silca GratesTM on Top of 2x4 Cleats• Screw in place with deck screws
• Install Silca GrateTM over desired area.
![Page 12: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/12.jpg)
Remodel / Resurface
Install Geotextile / Landscape Blanket • Install geotextile / landscape blanket over Silca GratesTM if
polymeric sand is to be used in construction.
![Page 13: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/13.jpg)
Remodel / Resurface
Test Install for Fit • Now is the best time to test install your choice of decking to
check for pattern and material fit and trim.
![Page 14: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/14.jpg)
Remodel / Resurface
Complete Installation of Decking Material
![Page 15: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/15.jpg)
Remodel / Resurface
Fill All Joints of Decking Material with Polymeric Sand*
*See next page for polymeric sand application tips.
![Page 16: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/16.jpg)
Remodel / Resurface
Polymeric Sand Application Tips • Check weather forecast to allow for 12 hours of curing time
without precipitation.
• Pour Polymeric sand into all joints from bag.
• Use broom to ensure all joints are filled with sand.
• Excess sand on the surface of the decking material can be removed using a wet/dry vacuum or leaf blower LIGHTLY. Be sure all joints remain filled with sand.
• Lightly mist polymeric sand and entire deck material surface using a garden hose or mister. Be sure all joints are saturated.
• Repeat misting 3 times.
![Page 17: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/17.jpg)
Remodel / Resurface
Enjoy Your New Deck!
![Page 18: Remodel / Resurface. Manufacturers Recommendations Remove all horizontal flooring, wood, composite lumber, etc. from existing deck. CAUTION: Have a qualified](https://reader030.vdocuments.net/reader030/viewer/2022020217/551789d25503460e6e8b5724/html5/thumbnails/18.jpg)
Remodel / Resurface
Let Us Know…
We enjoy receiving pictures and descriptions of your Silca GrateTM installations and your finished decks. We can also always use your feedback and ideas from your installation experience.
You can contact us at: [email protected]