+971 (4) 885-8577

Diesel Engine-Driven WeldersStick Welders and PaksMIG/MAG WeldersAdvanced Process WeldersTIG WeldersSemiautomatic WirefeedersSpoolgunsWirefeeder/Welders Automatic WirefeedersSub-Arc TractorsPlasma CuttersAutomatic Girth WeldersInduction Heating EquipmentWelding PositionersColumn and Boom ManipulatorsRotators

Red-D-Arc Welderentals is the world’s leading provider of rental welding products and services, with over 50,000 units in a fleet that includes welders, welding positioners and other welding-related equipment, for almost any type of welding process and application.

Rental, Lease, New and Used Sales

WeldersPositionersSpeciality Equipment

reddarc.com

Stick (SMAW) and Air Carbon Arc Cutting and Gouging (CAC-A) Processes, 3000 Watts AC Auxiliary PowerUp to 575 amps output and rated at 100% duty cycle at 400 amps for demanding applications. Dual continuous output control. Arc gouging up to 3/8" (100 mm) carbons.

SAE400 Diesel Welder DC CC 3kW

Stick, Air Carbon Arc Gouging, Up to 500 Amps OutputFive Output Taps and Fine Current Control, 4,000 Watts AC. Clean running Tier II engine. Hot Start provides positive stick electrode starts for easy starting of all types of electrodes.Can be used to power several MX350 Multiwelds with DC current for multi-operator use.

D502 5+4 Diesel Welder DC CC CV 4kW

Stick, DC TIG with Touch-Start, Built to Red-D-Arc Extreme-Duty Specifications275 amp at 35% duty cycle, constant current, DC, inverter welder with both single- and three-phase, 50/60 Hz voltage input. Outstanding E6010 and E7018 performance using up to 7/32" diameter.

ES275i Stick Welder and Paks DC CC

CC/CV Inverter Technology for Stick, MIG and TIG Welding, 350 Amps Output at 34 VDC, 60% Duty CycleFan-On-Demand cooling system operates only when needed reducing noise, energy use, and amount of contaminants pulled through the machine. Lift-Arc allows TIG starting without the use of high-frequency.

EX425 Inverter Welder and Paks DC CV CC

CC Stick, CV MIG/FCAW, and CV Submerged Arc Welding Modes, 600 Amps CC at 100% Duty Cycle, 44 Volts Designed for GMAW (MIG), FCAW and subarc welding, and stick and carbon arc gouging with up to 3/8" diameter electrodes. Includes standard terminal strip for wirefeeders and remote controls.

DC600 Multiprocess Welder DC CV CC

Stick (SMAW) and Air Carbon Arc Cutting and Gouging (CAC-A) Processes, 380/400/440V, 50/60 Hz Built-in arc control for stick welding alllows operators more flexibility when welding in tight areas where sticking electrodes is a problem. Automatic thermal load protection with indicator light.

Goldstar 602 Electric Welder/Multioperator Paks DC CC

Stick (SMAW), CV Wire, Air Carbon Arc Cutting and Gouging (CAC-A) ProcessesUp to 500 amps output and rated at 100% duty cycle at 400 amps @ 36 volts. 19 kW peak 240 VAC 3 phase, 12 kW peak 120/240 1 phase auxiliary power. Dual continuous output control. Adding the ES275i Sidewinder package adds 275 amps of DC welding current for dual-operator welding.

DX450 Diesel Welder with ES275i Sidewinder DC CC CV 19kW

Stick, Air Carbon Arc Gouging, Up to 500 Amps Output, Five Output Taps and Fine Current Control, 4,000 Watts AC PowerIndustrial-grade, sealed marine ignition switch with starter interlock. Standard oil pressure and coolant temperature gauges. Clean running Tier II engine. Hot Start provides positive stick electrode starts for easy starting of all types of electrodes.

D402 4+12 Portable Diesel Welder DC CC CV 12kW

Fronius TransPuls Synergic 5000MIG/MAG

Pulse welding up to 500 amps, 40% Duty Cycle at 500 Amps, 100% duty cycle at 360 Amps Fully digitised and microprocessor-controlled welding power source for short circuit, spray and pulsed arc providing programmed reproducible results. Suitable for MIG/MAG, TIG and electrode welding as well as manual or robotic applications.

MX350 MultiweldMultioperatorDC Converter

Automatic Girth (AGW) Welder The Automatic Girth (AGW) Welder (or 3 O’clock welder) performs x-ray quality horizontal welds up to 20 times faster than standard manual welding techniques, cutting in-field welding time for storage tanks by up to 40 percent. Handles plate from 1.8 m to 3.0 m high, and as thick as 50 mm. Ergonomically designed for efficiency, convenience, and accessibility, the AGW includes the Lincoln NA-3 solid state control and welding head fitted with nozzles, wire feed rolls, straighteners and 50 lb wire reels for either single or twin-arc wire. Available as package with a DC600 or DC1000 power source. Installation and set-up technicians for AGW girth welders are available at additional cost.Click www.reddarc.com/AGW for more information

Remote Controls Welding Cables Air Arc Gouging Torches

LT7 Submerged Arc Tractor 12VS Wirefeeder

ProHeat 35 Induction Heating Systems

TIG, Pulsed TIG, Stick Welding Processes, Input Power 115V 1-Phase, 230V 1/3-Phase, 400/460V 3-Phase Tailored arc control (DIG) allows the arc characteristic to be changed for specific applications and electrodes. Fan-On-Demand power source cooling system operates only when needed, reducing noise, energy use, and the amount of contaminates pulled through the machine. High Frequency Arc Starter for non-contact arc initiation.

Maxstar 200SD TIG Welder DC CC

TIG (GTAW), Stick (SMAW) and available Pulsed TIG (GTAW-P) Welding Processes, Input Voltage 220/400/440/520V, 50/60 Hz Superior low-end performance and available full-featured pulser for heat control. Squarewave output with AC balance control features adjustable penetration and cleaning action while increasing arc stability. Available with Integrated Cooler and Full Remote-Control Capability.

Dynasty 350 TIG Welder AC DC CC

Heavy Industrial Plasma Cutting (PAC) Processes, 230-400V, 50/60 Hz, 3-PhaseThe Powermax105 delivers superior cut quality and piercing up to 22 mm (7/8"). It has the duty cycle and reliability for the most demanding cutting and gouging jobs. Smart Sense technology automatically adjusts the gas pressure according to cutting mode and torch lead length. For hand cutting, gouging and automated cutting using air or nitrogen.

Powermax105 CE Plasma Cutter

High-Frequency Arc Starter and Generator 250 Amps at 60% Duty Cycle Output Helps Arc Starting when using TIG Welding Processes The HF251D is available in either 115 VAC or 220 VAC versions. An optional secondary contactor kit mounts inside the HF251D cabinet for power sources that do not have a contactor.

HF251D and TIG Accessories Flowmeter Regulator

TIG Torch

Self-Propelled Mechanized DC Wirefeeder tractor for flat and horizontal submerged arc welding, track and trackless versions, wire size range - solid wire 3/32 - 3/16".

Automatic Girth (AGW) Welder Welding Accessories

325 amp voltage-sensing wirefeeder for semi-automatic MIG, pulsed, and cored-wire welding processes - includes gas solenoid and flow meter.

Weld Preheating and Stress RelievingCan Reduce Preheat Time by 400%Liquid-Cooled and Air-Cooled SystemsReduced Set-Up, Fast Time-to-TemperatureWith the new ProHeat 35 induction heating system, one or two joints can be rapidly and uniformly heated for preheat or stress relief with minimal setup and instruction time. An induction heating systeminduces heat electromagnetically rather thanby using a heating element to conduct heat. Click www.reddarc.com/IHS for more information

Equipment Selector

DUBAI Red-D-Arc Middle East LLC Dubai Investment Park - 2, P: +971 (4) 885 8577www.reddarc.ae Dubai, UAE F: +971 (4) 885 8578 info@reddarc.aeABU DHABI Red-D-Arc Middle East LLC W/H No. 8, Sector M-17, Plot No.12 P: +971 (2) 552 5997www.reddarc.ae Musaffah, Abu Dhabi F: +971 (2) 552 7990 info@reddarc.aeOMAN Technical Trading Company LLC PO Box 1693, Ruwi - 112, Muscat P: +968 22 0 33 112 www.ttcoman.com Oman F: +968 24 81 02 92

QATAR International Welding Center St. 29, Gate # 20, Industrial Area, P: +974 4460 4757www.iwc-qatar.com Doha, Qatar P: +974 4460 5142 F: +974 4460 474KUWAIT Engg Contra Kuwait Company P.O. Box 52224, Al Habdan Towers, 2nd Floor, P: +965 2372 1136www.enggcontrakuwait.com Flat A22, Riqqa, 53462, Kuwait F: +965 2372 4070

Equipment Selector

Weld Automation Equipment

Fixed Height and Adjustable Height Positioners

Fit Up Bed (FUB) Rotators

+971 (4) 885-8577

Automated TIG WeldCladding (WCS) Systems

ConventionalRotators

Turnkey Automated Welding SystemsPositionersConventional Column and Booms,Column and Articulated BoomsConventional RotatorsSelf-Aligning Rotators (SAR)Elevating RotatorsAnti-Drift Rotators (ADR)Fit Up Bed Rotators (FUB)Tank Growing LinesPipe Shop RotatorsAutomated TIG Weld Cladding Systems (WCS)

Turnkey AutomatedWelding Systems

Column and Articulated Booms

Self-AligningRotators (SAR)

Traversing ElevatingRotators (TER)

Self-Aligning (SAR) Rotators