roofline: specification & installation

Roofline: Specification & Installation

homel ine.uk .com

Welcome to Homeline Homeline is GAP’s PVC-U cellular building products brand, and sits behind one of the UK’s best-known and most trusted fascia, soffit, trim, dry verge, ventilation and cladding ranges.

It’s produced in our modern 150,000 sqft production plant in Aberdare, South Wales; which is one of the largest in the UK and features a dedicated mixing plant, 12 extrusion lines, 2 foiling lines and a 100 + workforce.

2 3

Welcome to Homeline 2-3

GAP 4-5

Guarantees 6

Accreditations 7

Product Overview 8-9

Product Range 10-15

Fascias 10

Soffits 11

Trims 12

Core 14

Installation Requirements 16-17

Installation Diagrams 18

Roofline Ventilation 19

Colour Options 20-21

Product Information 22-23

“Homeline from GAP. The PVC-U roofline range of choice for Britain’s house builders.”

Through our network of 112 Depots we supply BSI and BBA-approved Homeline products to leading players in homebuilding, social housing, and building maintenance.

The range also features Homeline Core - the UK’s only BBA-approved recycled roofline products.

About Homel ine

• One Board of Directors • One Manufacturer• One Delivery Fleet • One Depot Network• One Account Manager • One Admin Team• One Invoice • One Culture• One Board of Directors • One Manufacturer• One Delivery Fleet • One Depot Network• One Account Manager • One Admin Team• One Invoice • One Culture

The Power of One • One Board of Directors• One Manufacturer• One Delivery Fleet• One Depot Network• One Account Manager• One Admin Team• One Invoice• One Culture

homel ine.uk .com4 5

Depots112 Locations

TransportWholly Owned Fleet

RooflineManufacturing

Local DeliveriesNationwide

Vertically Integrated Supply Chain

The Power of One

“Gone are the days of trying to manage several different suppliers without a common culture or single point of contact.”

homel ine.uk .com6 7Guarantees

25 YEARS

White Profiles – 25 YearsAll white PVC-U profiles will retain their decorative (no change greater than grey scale of 3) and mechanical function for a period of 25 years, under natural weathering conditions from the date of installation, provided they are installed and maintained in accordance with the procedures detailed by the BBA.

A 50 year lifetime guarantee for White profiles is available for commercial contractors upon registration and acceptance as a Homeline registered installer.

White Profiles (Core) – 25 YearsAll white PVC-U profiles will retain their decorative (no change greater than grey scale of 3) and mechanical function for a period of 25 years, under natural weathering conditions from the date of installation, provided they are installed and maintained in accordance with the procedures detailed by the BBA.

A 50 year lifetime guarantee for White profiles (Core) is available for commercial contractors upon registration and acceptance as a Homeline registered installer.

Foiled Cellular – 10 YearsAll foiled (woodgrains and colours) PVC-U profiles will retain their decorative and mechanical function for a period of 10 years, under natural weathering conditions from the date of installation, provided they are installed and maintained in accordance with the procedures detailed by the BBA.

Rainwater Profiles – 10 YearsRainwater profiles are guarantee against warping, cracking, splitting or discolouration for 10 years*, under natural weathering conditions from date of installation, provided they are installed and maintained in accordance with installation guidelines.

* Please visit www.gap.uk.com/homeline for a full guarantee certificate.

GuaranteesHomeline Building Products provide a robust guarantee policy that covers all white and foiled cellular products from discolouration, cracking and warping. We also provide guarantees for all rainwater products.

White P

rofi

les ∙

W

h i te P ro f i l es ∙ W

hit e Profiles ∙

25YEARS

Foiled Cel

lula

r ∙ F

oiled Cellular ∙ Foil e

d C

ellular ∙

10YEARS

Rainwa

ter

Pr o

f i

l es ∙ R a i n w

at e

r Pro

files ∙

10YEARS

Accreditations• BBA 09/4639 (Including Core Recycled Rooflines)

• Manufactured under ISO 9001:2015 Quality Standard

System

• Manufactured under ISO 14001:2004 Environmental

Standard

• BSI Kitemarked

• BS 7619 Specification Kitemarked

• Fire BS 476 Part 7, 1997

• BS 6105 Compliant

• Members of the BPF (British Plastics Federation)

AccreditationsProducts and processes within Homeline Building Products have been tested and inspected to ensure they comply with the most stringent product standards available, whilst also conforming to all relevant legislation within the industry.

Homeline

Gu

ara

n te e ∙ H o me l i n e G

ua

rantee∙

Product Overview

homel ine.uk .com8 9Product Overv iew

White P

rofi

les ∙

W

h i te P ro f i l es ∙ W

hite Profiles ∙

25YEARS

GUARANTEE

Foiled Cel

lula

r ∙ F

oi led Cellular ∙ Foil e

d C

ellular ∙

10YEARS

GUARANTEE

Rainwa

ter

Pr o

f i

l es ∙ R a i n w

at e

r Pro

files ∙

10YEARS

GUARANTEE

Fascia BoardsFascia boards are available in several thicknesses to suit both new builds and refurbishment projects and come in various mouldings and colours to suit building designs and styles.

Joints & CornersA large range of rigid and flexible joints, corners and trims are available to provide a neat finish to all roofline applications.

Soffit Boards Soffit boards are available in solid, pre-ventilated and hollow designs to suit building designs. They provide the return from the fascia board lip back to the brick work and can be used to ventilate the roof space.

VentilationVentilation is commonly provided through the use of over fascia ventilators which give continuous air flow to the roof space and prevent condensation. Ventilated soffit boards can also be used to provide ventilation to the roof space. See pg 19 for more information.

Dry Verge Dry Verge provides a mortar-free and secure method of fixing concrete interlocking verge tiles. Its neat interlocking design provides a consistent appearance that requires no maintenance.

RainwaterAvailable in five different styles to suit rainwater flow rates and six different colours, Homeline’s rainwater systems work perfectly with all our fascia boards.

BargeboardBargeboard use standard fascia boards as a method of covering the gable end of the roofline.

Not to be used as a cladding

Square 22mm

150m

m -

GJF

150W

175m

m -

GJF

175W

200m

m -

GJF

200W

225m

m -

GJF

225W

250m

m -

GJF

250W

405m

m -

GJF

405W

33mm

22mm

Bullnose 22mm

150m

m -

GB

J150

W

175m

m -

GB

J175

W

200m

m -

GB

J200

W

225m

m -

GB

J225

W

250m

m -

GB

J250

W

405m

m -

GB

J405

W

24mm

22mm

Square 16mm

150m

m -

GS

F150

W

175m

m -

GS

F175

W

200m

m -

GS

F200

W

225m

m -

GS

F225

W

250m

m -

GS

F250

W

300m

m -

GS

F300

W

405m

m -

GS

F405

W33mm

16mm

Bullnose 16mm

150m

m -

GFB

150W

175m

m -

GFB

175W

200m

m -

GFB

200W

225m

m -

GFB

225W

250m

m -

GFB

250W

405m

m -

GFB

405W

24mm

16mm

Ogee 16mm

28mm

16mm

150m

m -

GO

F150

W

175m

m -

GO

F175

W

200m

m -

GO

F200

W

225m

m -

GO

F225

W

250m

m -

GO

F250

W

405m

m -

GO

F405

W

Ogee Cap Over 9mm

150m

m -

GG

F150

W

175m

m -

GG

F175

W

200m

m -

GG

F200

W

225m

m -

GG

F225

W

250m

m -

GG

F250

W

405m

m -

GG

F405

W

39mm

9mm

Square Cap Over 9mm

150m

m -

GR

C15

0W

100m

m -

GR

C09

5W

175m

m -

GR

C17

5W

200m

m -

GR

C20

0W

225m

m -

GR

C22

5W

250m

m -

GR

C25

0W

300m

m -

GR

C30

0W

400m

m -

GR

C40

0W

605m

m -

GR

C60

5W

39mm

9mm


A comprehensive selection of fascia boards are available in various styles and thicknesses with different return leg sizes designed to cover the lip of the soffit board. All fascias are available in a range of heights with double ended boards for boxends. Soffit boards are available in solid, pre-ventilated and hollow options in various widths.

Fascia Boards

Perfe

ct fo

r new build

Cap Over Boards

Product Range

Vented Soffit Board 9mm*

Hollow SoffitDouble Vented Soffit Board 9mm*

Solid Soffit Board 9mm

9mm

100mm - GMB100W

125mm - GMB125W

150mm - GMB150W

175mm - GMB175W

200mm - GMB200W

225mm - GMB225W

250mm - GMB250W

300mm - GMB300W

405mm - GMB405W

450mm - GMB450W

500mm - GMB500W

605mm - GMB605W

9mm

150mm - GVB150W

175mm - GVB175W

200mm - GVB200W

225mm - GVB225W

250mm - GVB250W

300mm - GVB300W

405mm - GVB405W

450mm - GVB450W

605mm - GVB605W

9mm

300mm - GHC300W

Soffit Boards

175m

m -

GFF

175W

200m

m -

GFF

200W

225m

m -

GFF

225W

16mm

16mm

150m

m -

GFF

150W

250m

m -

GFF

250W

405m

m -

GFF

405W

Flat 16mm

Product Range

150mm - GDVB150W

300mm - GDVB300W

405mm - GDVB405W

450mm - GDVB450W

* Please see Ventilation guide at www.gap.uk.com/homeline

125m

m -

GR

C12

5W

Product Range

Over Fascia VentilatorCircular Vent

500mm - C5031000mm - G1200N1000mm - G2500N

Combed Vent

900mm - C402200mm

Over Fascia Protection

1500mm - C400200mm

Jumbo Vent

900mm - C401180mm

Soffit Joint Trim

5m GHSW

Centre Joint Trim

5m GCJW

2 Part External Corner

5m G2ECW

J Trim

5m GJTW

Felt Roof Edge Trim

5m GFREW

U Channel

5m GUCW

70mm - GCVW

70mm

2 Part Universal Trim

5m G2UCW

Decorative Fascias Convex 16mm200mm GDFVW

Decorative Fascias Concave 16mm200mm GDFCW

Single Ended Joints

Sq

uar

e -

300m

m -

GR

JW

Og

ee -

300

mm

- G

OJW

Double Ended Joints

Sq

uar

e -

500m

m -

GS

J500

W

Bu

llno

se -

500

mm

- G

BJ5

00W

Og

ee -

500

mm

- G

OJ5

00W

Single Ended Corners

Sq

uar

e -

300m

m -

GIS

C30

0W

Og

ee -

300

mm

- G

IOC

300W

Og

ee -

300

mm

- G

OC

W

Sq

uar

e (1

35˚)

- 3

00m

m -

G13

5RC

W

Sq

uar

e (1

35˚)

- 3

00m

m -

G13

5IR

CW

Sq

uar

e -

300m

m -

GR

CW

Double Ended CornersInternal

Bu

llno

se -

600

mm

- G

IBC

500W

External

Sq

uar

e -

500m

m -

GS

C50

0W

Bu

llno

se-

500m

m -

GB

C50

0W

Og

ee -

500

mm

- G

OC

500W

Flat Back Spire

3D Spire

910mm - GFBS

910mm - G3DW

Bracing Bar

Ball End Finial

965mm - GBF965W1500mm - GBF1500W

1500mm - GBBW

Gable Finial340mm x 100mm - GFINW


To provide finishing touches a range of trims, joints and corners are available for roofline installations. Ventilation options are provided through over fascia ventilators or circular vents for the soffit.

Finishing Touches

Joints

Ventilation

Trims

Product Range

“The complete solution for PVC-U rooflines.”

Please see Ventilation guide at www.gap.uk.com/homeline

homel ine.uk .com14 15Core

Virgin PVC-U Outer Skin

To ensure colour stability and exact colour matching, we use the same process as our standard fascias for the outer skin of the roofline system. This means once installed – it’s impossible to tell the difference between a standard and recycled roofline.

100% Recycled Inner Core

We use recycled foam products which are processed and then pulverised into pellets to ensure they can be re-extruded into our inner core. The difference in colour is a natural occurrence based on different coloured foams being recycled. Don’t forget that once installed you can’t see the inner core.

Solid Soffit Board 9mm

9mm

100mm - EMB100W

150mm - EMB150W

175mm - EMB175W

200mm - EMB200W

225mm - EMB225W

250mm - EMB250W

300mm - EMB300W

400-mm - EMB405W

450mm - EMB450W

500mm - EMB500W

605mm - EMB605W

Square 16mm

Core is Homeline’s exclusive range of BBA-approved rooflines. Included in the range are full replacement fascia boards, soffit boards and a cap over board.

Fascia Board

Product Range

150m

m -

ES

F150

W

175m

m -

ES

F175

W

200m

m -

ES

F200

W

225m

m -

ES

F225

W

250m

m -

ES

F250

W

405m

m -

ES

F405

W

33mm

16mm

Cap Over Board

Soffit Board

25 YEARS

Whether you’re a House Builder or Specifier, using BBA-approved Core rooflines will demonstrate you’re committed to using top quality recycled materials on your development, from one of the most forward thinking and environmentally friendly roofline manufacturers.

recycled into our core, not the earths.

Square Cap Over 9mm

150m

m -

ER

C15

0W

100m

m -

ER

C09

5W

175m

m -

ER

C17

5W

200m

m -

ER

C20

0W

225m

m -

ER

C22

5W

250m

m -

ER

C25

0W

300m

m -

ER

C30

0W

400m

m -

ER

C40

0W

605m

m -

ER

C60

5W

39mm

9mm


Fascia Boards

• Full replacement fascia boards are fixed directly to rafter ends at centres not exceeding 600mm for white and 400mm for foiled profiles, using 2 x 65mm A4 marine grade stainless steel plastic headed nails.

• Cap over fascias should be fixed as above, as well as using a backing board of marine grade plywood of not less than 12mm thick.

• Butt joints between fascia boards should be made at the rafter end and covered with fascia joint, fixed to the end of one board with either a low-modulus silicone sealant or a solvent-weld adhesive. Provision for expansion (minimum 10mm in-between two 5m boards) should be allowed between boards.

• At corners the joint is covered with a corner trim, fixed to the end of one board only with a plastic headed pin, solvent-weld adhesive or low-modulus silicone sealant. Provision for thermal movement of the boards should be allowed as above.

• PVC-U gutter systems as specified to BS4576-1:1989 may be screw-fixed directly to full replacement fascia boards. Gutter bracket spacing must not exceed 1m and are typically at a maximum no greater than 800mm centres.

Soffit Boards

• Soffit boards are cut to size and fitted into the groove at the rear of the fascia.

• The boards are fixed to rafter feet, soffit bearers or other timber support at centres along their length, not exceeding 600mm for white and 400mm for foiled profiles, and across their width, not exceeding 200mm, using 2 x 40mm A4 marine grade stainless steel plastic headed pins.

• Where required, soffit boards may be joined along their length or width leaving a 4mm expansion gap at each board end using a soffit joint strip.

• To comply with building regulations, a vented soffit board, soffit ventilator or over fascia ventilation should be used as required.

Bargeboards

• Bargeboards are installed by fixing fascia boards to a gable ladder.

• Bargeboards meeting at a ridge should be mitred to the appropriate angle. A fascia joint or finial should be used to cover the joint.

• Box ends are constructed from a larger depth fascia board and trimmed to suit the roof pitch.

Installation Requirements• Selected boards and accessories are assembled and cut to size. • Rafter feet are cut to a line. • Soffit bearers, battens, eaves fillets, brackets and other additional

timber supports are fixed to a sound substrate.

• Remove protective film before or straight after installation.

Eaves Protector &Over Fascia Ventilator

Soffit Plastic Headed Pin

Plastic Headed Nail

16mm Square Fascia

SquareRainwater

Remaining Felt positioned over Eaves Protector

Plain Soffit

Plastic Headed Nail

Plastic Headed Pin

Plastic Headed Pin

16mmSquare Fascia

Dry Verge

Square Fascia & Soffit

Bargeboard & Soffit

16mm square fascia boards should be nailed directly to rafter ends with ventilation provided through over fascia ventilators. The gap between the fascia and the brick should be closed using a 9mm soffit board.

16mm square fascia boards should be used to protect the bargeboard on the gable end of the roof with interlocking or continuous dry verge being used to protect the verge. The gap between the fascia and the brick should be closed using a 9mm soffit board.

Insta l la t ion Requirements

External Corner

Roofline Ventilation guide is available on

our website.


5mm*

10mm10mm

10mm

5mm

Pitches of 15° or less require 25mm at eaves

25mm25mm

5mm

25mm 25mm

* For pitches over 35° or spans in excess of 10m

Insta l la t ion Diagrams

Installation Diagrams

Min5mm

Min5mm

FasciaBoard

FasciaJoint

FasciaBoard

Min10mm

FasciaBoard

FasciaBoard

FasciaCorner

Min5mm

Top Elevation Top Elevation

Min5mm

Min10mm

SoffitBoard

SoffitBoard

FasciaBoard

SoffitJoint

FasciaBoard

FasciaBoard

Internal Corner

Min5mm

Min5mm

Fascia Joints Soffit Joints Pitch Over 15

Pitch Under 15° Warm Roofs

Internal Corner

Roofline Ventilation Homeline vented soffit boards are covered by the BBA certificate 09/4639. When used in accordance with this certificate they provide a simple and effect method for meeting building regulations.

Fascia Fixing PointsHomeline fascia boards are easy to install thanks to horizontal lines on the protective film. This ensures the plastic headed nails are perfectly level and spaced accurately along the board at either 600mm (white) or 400mm (foils) centres.

homel ine.uk .com

• The Building Regulations 2000 (as amended) (England and Wales)

• Requirement C2 (b)(c) Resistance to Moisture and Regulation 7: Materials and workmanship.

• The Building (Scotland) Regulations 2004 (as amended)

• Regulation 8 (1) (2): Fitness and durability of materials and workmanship.

• Regulation 9: Building Standards – Construction.

• Standard 3.15 – Condensation.

• The Building Regulations (Northern Ireland) 2000

(as amended)

• Regulation B2: Fitness of materials and workmanship.

• Regulation B3(2): Suitability of certain materials.

• Regulation C4(b): Resistance to ground moisture and weather.

• Regulation C5: Moisture.

• For duo roof pitches of 15˚ and over but less than 70˚ where both ceiling and insulation are horizontal : Eaves level ventilation equivalent to 10mm of clear continuous air flow per metre run on both sides of a roof allowing adequate cross-ventilation.

• For duo roof pitches of 15˚ and over but less than 70˚ where both ceiling and insulation are horizontal : Eaves level ventilation equivalent to 10mm of clear continuous air flow per metre run on both sides of a roof allowing adequate cross-ventilation.

• For duo roof pitches of 15˚ and over where the ceiling follows the pitch of the roof: Eaves level ventilation to 25mm of continuous air flow per metre run on both sides of a roof.

• For duo roof pitches where the ceiling follows the pitch of the roof: Eaves ventilation equivalent to 25mm of continuous air flow per metre run. It is essential that a minimum unrestricted air space of 50mm is maintained between the underside of the roof deck and the top of the insulation. Consideration should be given to the probability of the sarking felt bowing between the rafters and it should be ensured that does not reduce the gap between felt and insulation to less than 50mm.

• For roof pitches less than 15˚ (including flat deck roof construction): Eaves level ventilation equivalent to 25mm of clear continuous air flow per metre run on both sides of a roof allowing adequate cross- ventilation.

• Eaves ventilation should be provided to the whole area of the eaves giving complete comprehensive airflow. When providing roof space ventilation for flat roofs, it is essential that a minimum unrestricted airspace of 50mm is maintained between the underside of the roof deck; where possible these should be the longest sides to achieve maximum cross-ventilation. Duo Pitched roofs of 20˚ and over or greater than a 10m span, should have additional ventilation provided at the ridge equivalent to at least 3mm wide continuous gap.

5mm*

10mm10mm

10mm

5mm

Pitches of 15° or less require 25mm at eaves

25mm25mm

5mm

25mm 25mm

* For pitches over 35° or spans in excess of 10m

Pitch Over 15

Pitch Under 15° Warm Roofs

Roofline Ventilation Homeline vented soffit boards are covered by the BBA certificate 09/4639. When used in accordance with this certificate they provide a simple and effect method for meeting the following building regulation requirements :

Single vented boards offer a 14mm continuous slot or 14,000 square mm pre linear metre, with double vented boards offering a 28mm continuous slot or 28,000 square mm pre linear metre.

For more information relating to ventilation, please visit www.gap.uk.com/homeline

Black Code .BLRAL 8022

Dark Grey Code .DG RAL 7016

Slate Grey Code .SGRAL 7015

Anthracite Grey Code .AG RAL 7016

Foiled WhiteCode .FWRAL 9010

White Code .WRAL 9003 (Virgin skin no foil)

CreamCode .CRRAL 9001

Colour Options Homeline rooflines are available in several colour and finish options (smooth and grained) as shown above. For exact colour options, please ask your representative for a colour swatch.

• Reflects 80% of the sun’s harmful rays

• 12 times thicker than traditional foils

• 250 microns thick

• Difficult to scratch due to thickness of foil

Heat Shield Protection Exclusive to Homeline, Heat Shield is a revolutionary technology that prevents coloured or woodgrain foils from warping, bending, cracking or bubbling.


Grained

A woodgrain embossed finish which matches PVC-U window and door profiles.

Smooth

A smooth finish to replicate the appearance of Aluminium profiles.

For Appearance, Durability and Colourfastness please see page 22.

Rustic GreenCode .RGRAL 6009

Chartwell GreenCode .CG

Royal BlueCode .RBRAL 5011

Wine RedCode .WRRAL 3011

Irish OakCode .IO

Light OakCode .LO

RosewoodCode .R

WoodgrainCode .WG

Colour Opt ions

Environmental Information

Homeline Building Products takes its impact on the environment seriously. We are committed to providing quality products and services which comply with all relevant environmental legislation and we strive to use pollution prevention and environmental best practices in all aspects of our operation.

• 100% recyclable

• Can be recycled up to 10 times

• More thermally efficient than timber

• Weather resistant

• Working life of over 40 years

• Never needs painting

• Recycled roofline option available

Product Information

Appearance

Products are free from sink marks, cracks or foreign bodies when viewed at 90˚ to the surface at a distance of 1m in diffused north light.

Density

The density of Homeline Cellular PVC-U is on average 500 kg/m.

Durability

Products will retain their physical integrity for many years. Visually they will age uniformly with only minimum changes to appearance. White and foiled products carry comprehensive guarantees (please see pg. 6 for more details). Hollow Soffit must not be used as a cladding.

Colourfastness

All our products have passed the U.V. aged impact tests and the colourfast requirements set out in BS7619. All white products will not change greater than a Grey scale of 3 when exposed to normal weather conditions experienced in northern Europe.

Chemical Resistance

In order to preserve the high quality surface finish it is recommended that only warm soapy water is used to clean the product as required.

Fire Classification

When tested in accordance with BS476-7 : 1997, full replacement fascia boards achieve a Class 1 surface spread of flame rating. Soffit and the hollow soffit achieve a Class 1Y rating.

Impact Resistance

All Homeline products are certified by BS7619 for impact tests.

Softening Point

Homeline cellular products have a softening point in the region of 70˚C.

Heat Shield

Standard on all Homeline foils, Heat Shield technology prevents heat from being absorbed into the profile preventing warping, bending and twisting.

Water Absorption

Tests have been carried out to BS EN ISO 62 1999 and typically Homeline cellular products have a water retention of < 1%.

Thermal Movement & Conductivity

The co-efficient of linear expansion for our white products at 20˚C is 5 x 10 - 5 as tested in accordance with BS4370-3 1998. For 9mm thick fascia profiles it is recommended that a 5mm expansion gap is given to both ends of the board. For foiled products it is recommended that an 8mm expansion gap is used both ends of the product. Homeline Building Products have been tested in accordance with BS4370-2 1993 resulting in a value of 0.062W/mK which is greater than the equivalent soft wood product.

Loading

Full replacement fascia boards will support eaves tiles in common usage, provided they are installed in accordance with manufacturer’s guidelines.

Product InformationHomeline Building Products are manufactured and tested to BS7619 and our manufacturing facility has been accredited to ISO 9001:2015 and 14001:2004.


Handling & Storage

PVC-U cellular products are relatively light and easy to handle due to their composition. Therefore, when handling our products all you need to do is ensure both ends of the profile are supported to prevent the product being damaged.

It is advisable that products are stored under cover, with the face against a flat firm surface. If stacked (i.e. not in a steel stillage), do not exceed 1m in height. Cellular products are protected using polythene lo-tac film with fixing points on fascia boards.

Distribution

Products are delivered to site or storage facilities using GAP’s own dedicated delivery fleet from 112 depot locations strategically located across the UK.

Working with Materials

PVC-U by its very nature is virtually maintenance free. Once installed, we recommend the products are cleaned using soapy water to remove any dirt or dust that has gathered. Cutting and shaping of PVC-U is quite easy and existing carpentry tools may be utilised. It is recommended that the protective tape is removed either immediately before or straight after fitting, as exposure to sunlight can make the tape very difficult to remove.

Health & Safety

When cutting or shaping materials, ensure adequate protection is taken to avoid any injury. Protective eye and hand equipment should be worn. COSHH sheets available on request

Product In format ion

recycled into our core, not the earths.

GAP LtdPartnership WayShadsworth Business ParkBlackburnBB1 2QP

T: 0845 313 10 12 F: 0845 313 03 13W: gap.uk.comS: @GAPLtdGeneral All-Purpose Plastics Ltd, T/A GAP LtdRegistered No: 02767596

All photographs, colours and images are to be considered as representative of the actual product. Homeline reserve the right to change colours, sizes or designs without prior notice.

Homeline is a registered trade mark ® 2377290. GHBP-PG-05-11/17.

gap.uk.com

roofline: specification & installation

Documents