rsc bio solutions >> formerly terresolve …...rsc futerra is the leading-edge lubricant...

2
RSC FUTERRA is the leading-edge lubricant designed to outperform every other Environmentally Acceptable Lubricant (EAL) on the market. Formulated as an HEPR* technology, RSC FUTERRA HF Series is a high performance, Ecolabel Certified Hydraulic Fluid series that is the first of its kind. These renewable hydrocarbon EALs are designed to withstand extreme conditions and corrosion while operating in severe outdoor environments. It is intended for severe service, extreme high temperature (250°F/121°C), low temperature (-40°F/40°C) and high pressure (5000+psi/34,470 kPa) applications. The RSC FUTERRA HF Series was specially designed for industrial applications where incidental environmental exposure of the lubricant is a cause for concern, as it is: • Ecolabel Certified Compliant with US EPA Vessel General Permit (VGP), IMO Guidelines for Operating in Polar Water and Regelement Onderzoek Schepen op de Rijn (ROSR) for inland shipping • Non-sheening** KEEP MOVING. FORWARD. STANDS UP BETTER IN TOUGH ENVIRONMENTS & KEEPS YOUR EQUIPMENT RUNNING • Excellent oxidative and hydrolytic stability – ensuring that the fluids will last much longer than other EALs and conventional oils • Excellent corrosion resistance and high temperature stability • Demulsability – allowing for separation of water from your system, increasing effectiveness of the lubricant and reducing change-outs • Near zero foam tendency – allowing a longer pump life and more efficient lubrication than even conventional oils FUTERRA HF SERIES IS THE RIGHT CHOICE AND HERE’S WHY * Hydraulic Environmental Polyalphaolefin and related hydrocarbon products ** The Clean Water Act of 1972 mentions discharges of oils should not exhibit any visible ‘sheen’ on the water’s surface otherwise it is considered a pollutant (according to CFR 40 Part 435 A). OFFERS GREATER FLEXIBILITY & THE ULTIMATE SYSTEM COMPATIBILITY • Drop-in replacement for mineral oil based lubricants • Broad seal compatibility – OEM tested with a wide range of elastomers and conditions • A lower pour point so you can ship product through the Arctic • Compliance across the globe and into the future THE RIGHT CHOICE: FUTERRA HF SERIES PROTECTS YOUR HYDRAULIC SYSTEMS LONGER THAN OTHER EALS

Upload: others

Post on 05-Jul-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: RSC Bio Solutions >> Formerly Terresolve …...RSC FUTERRA is the leading-edge lubricant designed to outperform every other Environmentally Acceptable Lubricant (EAL) on the market

RSC FUTERRA is the leading-edge lubricant

designed to outperform every other

Environmentally Acceptable Lubricant (EAL) on

the market. Formulated as an HEPR* technology,

RSC FUTERRA HF Series is a high performance,

Ecolabel Certified Hydraulic Fluid series that is

the first of its kind. These renewable hydrocarbon

EALs are designed to withstand extreme conditions

and corrosion while operating in severe outdoor

environments. It is intended for severe service,

extreme high temperature (250°F/121°C), low

temperature (-40°F/40°C) and high pressure

(5000+psi/34,470 kPa) applications.

The RSC FUTERRA HF Series was specially designed for

industrial applications where incidental environmental

exposure of the lubricant is a cause for concern, as it is:

• Ecolabel Certified

• Compliant with US EPA Vessel General Permit (VGP),

IMO Guidelines for Operating in Polar Water and

Regelement Onderzoek Schepen op de Rijn (ROSR)

for inland shipping

• Non-sheening**

KEEP MOVING. FORWARD.

STANDS UP BETTER IN TOUGH ENVIRONMENTS & KEEPS YOUR EQUIPMENT RUNNING

• Excellent oxidative and hydrolytic stability – ensuring

that the fluids will last much longer than other EALs

and conventional oils

• Excellent corrosion resistance and high

temperature stability

• Demulsability – allowing for separation of water from

your system, increasing effectiveness of the lubricant

and reducing change-outs

• Near zero foam tendency – allowing a longer

pump life and more efficient lubrication than

even conventional oils

FUTERRA HF SERIES IS THE RIGHT CHOICE AND HERE’S WHY

* Hydraulic Environmental Polyalphaolefin and related hydrocarbon products** The Clean Water Act of 1972 mentions discharges of oils should not exhibit any visible ‘sheen’ on the water’s surface otherwise it is considered a pollutant (according to CFR 40 Part 435 A).

OFFERS GREATER FLEXIBILITY & THE ULTIMATE SYSTEM COMPATIBILITY

• Drop-in replacement for mineral oil based lubricants

• Broad seal compatibility – OEM tested with a wide

range of elastomers and conditions

• A lower pour point so you can ship product through

the Arctic

• Compliance across the globe and into the future

THE RIGHT CHOICE: FUTERRA HF SERIES PROTECTS YOUR HYDRAULIC SYSTEMS LONGER THAN OTHER EALS

Page 2: RSC Bio Solutions >> Formerly Terresolve …...RSC FUTERRA is the leading-edge lubricant designed to outperform every other Environmentally Acceptable Lubricant (EAL) on the market

Separates water from the system, increasing effectiveness of the lubricant, extending equipment life.

Oxidative stability of 3 to 4 times longer than other EALs, resists breakdown and extends the life of the fluid, even past petroleum.

600 Radiator RoadIndian Trail, NC 28079-7643

800-661-3558+1 704.684.6100

KEEP MOVING. FORWARD. rscbio.com 030618

RSC Futerra™ HF Series meets the requirements for various manufacturers. Visit our website or contact customer service for a full list of OEM approvals.

Demulsification Rate Acid Generation Oil Phase

RPVOT Time (min.)• Stern tubes

• Thrusters

• Deck equipment

• Dredging equipment

• Pile driving equipment

• Construction equipment

• Rail construction

• Bucket trucks

HEPR TECHNOLOGIES & PRODUCTS:RSC FUTERRA™• HF Series - High Performance, Ecolabel Certified Hydraulic Fluids

RSC EnviroLogic® • GO Series - Readily Biodegradable Synthetic Gear Oils

• GREASE Series – Biodegradable Greases

FUTERRA HF resists hydrolysis and also neutralizes acid from the lubricating solution keeping corrosive elements out of your components when faced with moisture contamination.

TYPICAL APPLICATIONS

Beginning Acid Number Ending Acid NumberTime (min.)

HETG

120

100100

30 30

0

30 3035

10092.5

57.5

510

100 100

80

60

40

20

0

HEPG HEES 1 HEES 2 Emulsifiable HEES

FUTERRA HF Petroleum HETG

0

0.2

0.4

0.6

0.8

1

1.2

1.4

1.6

1.8

HEES 1 HEES 2 HEES 3 FUTERRA HF

Demulsification (%)

Petroleum

FUTURRA HF

HEES

HEPG

HETG

878

1399

163

800

100

0 200 400 600 800 1000 1200 1400 1600