rtn 600 configuration-a
TRANSCRIPT
-
7/28/2019 RTN 600 Configuration-A
1/77
www.huawei.com
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
2013/4/12 Security Level:INTERNAL
OptiX RTN 600 Configuration
Using the T2000 and T2000 Web LCT
-
7/28/2019 RTN 600 Configuration-A
2/77
www.huawei.com
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
2013/4/12 Security Level:INTERNAL
OptiX RTN 600 Configuration
Using the T2000 and T2000 Web LCT
-
7/28/2019 RTN 600 Configuration-A
3/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 2Page 2
Foreword
Huawei provides NE-level, subnet-level and network-level
management systems for the RTN 600 series products.
This course describes the NE-level management system OptiX
iManager T2000 Web LCT and the subnet-level management
system OptiX iManager T2000.
-
7/28/2019 RTN 600 Configuration-A
4/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 3Page 3
Reference
Digital Microwave Communication
principles
OptiX iManager T2000 Management
System Solution V2.31
OptiX iManager T2000 Web LCT
Installation Guide and User Guide
-
7/28/2019 RTN 600 Configuration-A
5/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 4Page 4
Objectives
Upon completion of this course, you will be able to:
Describe the functions of the T2000 and the T2000 Web LCT.
Install the T2000 Web LCT.
Configure services and protection by using the T2000 and the
T2000 Web LCT.
-
7/28/2019 RTN 600 Configuration-A
6/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 5Page 5
Contents
1. Introduction to Networks
Management Systems
2. Introduction to T2000 Web LCT
3. Introduction to the T2000
-
7/28/2019 RTN 600 Configuration-A
7/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 6Page 6
Comprehensive Management
System Solution
iManager T2000 iManager T2000
iManager T2100
OSS or integrated
NMS
MMLMML MML
NE
management
layer
Network
management
layer
Service
management
layer
Qx Qx
NE layer
iManager T2100
iManager T2000
CORBA
iManager T2000
Integrated NMS & OSS
CORBA CORBA
LCT QxQx
-
7/28/2019 RTN 600 Configuration-A
8/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 7Page 7
Introduction to Management SystemsThe orientation of each management system is as follows:
iManager T2000 LCT The T2000 local craft terminal (LCT) realizes the local maintenance and
equipment turn-up of Huawei OptiX products.
iManager T2000
The iManager T2000 (T2000 for short) is a subnet management system (SNMS)
for transport networks. The T2000 manages the full series of Huawei OptiX
products. The T2000 supports all functions of the NE layer and some of the
network layer management functions.
iManager T2100
The iManager T2100 (T2100 for short) is a network-level management system
that uniformly manages the full series of Huawei OptiX products. It manages
large-scale optical transport networks in a uniform manner.
iManager MDS
The iManager MDS (MDS for short) is a business-level management system for
transport networks. It assists users to plan and simulate an optical transport
network.
-
7/28/2019 RTN 600 Configuration-A
9/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 8Page 8
Contents
1. Introduction to Management Systems
2. Introduction to the T2000 Web LCT
3. Introduction to the T2000
-
7/28/2019 RTN 600 Configuration-A
10/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 9Page 9
Contents
Introduction to theT2000Web LCT
2.1 Main Characteristics
2.2 Application Scenario
2.3 Installation Guide
2.4 Connecting to NEs
2.5 Configuration Operations
-
7/28/2019 RTN 600 Configuration-A
11/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 10Page 10
T2000 Web LCT Main Characteristics
The characteristics of the T2000 Web LCT are as
follows:
Web-based solution
Per-NE configuration and maintenance
Access to a local NE through a LAN/RS 232
Access to a remote NE through DCC
Management of NEs of various types
Concurrent login to a maximum of 32 NEs
Integration with the T2000, T2100 or third-
party management system
-
7/28/2019 RTN 600 Configuration-A
12/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 11Page 11
T2000 Web LCT Function
The T2000 Web LCT provides the following NE-layer management functions:
Service configuration (including PDH and SDH microwave services)
Protection configuration (intermediate frequency protection, SNCP,
LMSP)
Setting and query of the intermediate frequency attributes Setting and query of the radio frequency attributes
Data services (the 10M/100M fast Ethernet transparent transmission
board EFT4 is supported)
Setting and viewing of alarms and performance data Communication and security
-
7/28/2019 RTN 600 Configuration-A
13/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 12Page 12
Contents
Introduction to the T2000 Web LCT
2.1 Main Characteristics
2.2 Application Scenario
2.3 Installation Guide
2.4 Connecting to NEs
2.5 Configuration Operations
-
7/28/2019 RTN 600 Configuration-A
14/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 13Page 13
T2000 Web LCT Application ScenarioStand-alone
The equipment maintenance personnel installs the
T2000 Web LCT on a PC.
The equipment maintenance personnel manages local
or remote NEs by using the T2000 Web LCT.
-
7/28/2019 RTN 600 Configuration-A
15/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 14Page 14
T2000 Web LCT Application Scenario
Integrated
The personnel at the network operations center install the EMS or NMS on a PC.
Install the T2000 Web LCT as a part of the EMS. The NMS need not be installed.
The personnel at the network operations center starts the T2000 Web LCT by
using the EMS or NMS client.
NE network
DCN
NMS
EMSEMS
NE network
-
7/28/2019 RTN 600 Configuration-A
16/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 15Page 15
Contents
Introduction to the T2000 Web LCT
2.1 Main Characteristics
2.2 Application Scenario
2.3 Installation Guide
2.4 Connecting to NEs
2.5 Configuration Operations
-
7/28/2019 RTN 600 Configuration-A
17/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 16Page 16
T2000 Web LCT Installation Guide
Pre-installation
Configuration requirements
The T2000 Web LCT runs on the Windows operating system.
Hardware requirements
CPU: Pentium III 700 MHz or higher
RAM: 256 MB (recommended 512 MB or higher)
Monitor: 1024 x 768 resolution
Serial port: RS 232
Ethernet port: 10M/100M
-
7/28/2019 RTN 600 Configuration-A
18/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 17Page 17
T2000 Web LCT Installation Guide
Pre-installation (continued)
Software requirements
Windows XP Professional SP2/Windows 2003
Server Standard SP1
Internet Explorer 6.0 or better
Tomcat 5.0
JDK1.4.2
Servlet 2.3
-
7/28/2019 RTN 600 Configuration-A
19/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 18Page 18
T2000 Web LCT Installation Guide
Prerequisite: Windows XP Professional SP2 or Windows 2003 Serverstandard SP1 must be installed.
Procedure
Step 1 Uncompress the installation package or Insert the installation CD,
and run the setup.exe file. Click Next.
-
7/28/2019 RTN 600 Configuration-A
20/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 19Page 19
T2000 Web LCT Installation Guide
Step 2 Select I accept the terms of the license agreement and click Next.
-
7/28/2019 RTN 600 Configuration-A
21/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 20Page 20
T2000 Web LCT Installation Guide
Step 3 Enter your user name, company name, and serialnumber Click Next.
-
7/28/2019 RTN 600 Configuration-A
22/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 21Page 21
T2000 Web LCT Installation Guide
Step 4 Click Next.
-
7/28/2019 RTN 600 Configuration-A
23/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 22Page 22
T2000 Web LCT Installation Guide
Step 5 Click Install and the Setup Status dialog box is displayed. After theT2000 Web LCT is installed, the Installation Complete dialog box is displayed.
-
7/28/2019 RTN 600 Configuration-A
24/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 23Page 23
T2000 Web LCT Installation Guide
Step 6 Click Finish.
-
7/28/2019 RTN 600 Configuration-A
25/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 24Page 24
T2000 Web LCT Installation Guide
Checking the InstallationAfter you install the T2000 Web LCT, you need to check the
correctness of installation. Check directories and files as follows:
The T2000 Web LCT installation directory.
By default is C:\Web_LCT.
The installation directory of the jre software.
By default is C:\Web_LCT\jre.
The installation directory of the Tomcat software.
By default is C:\Web_LCT\Tomcat .
Check the shortcut icon on desktop. The iManager T2000 Web LCT group
is created in the Windows Program bar.
-
7/28/2019 RTN 600 Configuration-A
26/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 25Page 25
Contents
Introduction to the T2000Web LCT
2.1 Main Characteristics
2.2 Application Scenario
2.3 Installation Guide
2.4 Connecting to NEs
2.5 Configuration Operations
-
7/28/2019 RTN 600 Configuration-A
27/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 26Page 26
T2000 Web LCT Connecting to NEs To use the T2000 Web LCT to configure and manage NEs, you need to
connect the T2000 Web LCT to NEs with an Ethernet cable or a serial
port.
Procedure
By using a network cable
1. Connect a network cable to the computer where the T2000 Web
LCT resides.
2. Route the network cable to the equipment side and connect the
RJ-45 connector of the network cable to the network
management interface on the front panel of the equipment.
-
7/28/2019 RTN 600 Configuration-A
28/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 27Page 27
T2000 Web LCT Connecting to NEs
Procedure (continued)
By using DCN
1. Use a network cable to connect the computer where the T2000
Web LCT resides to the DCN.
2. Connect one end of another network cable to the network
management interface on the front panel of the equipment.
Connect another end to the DCN.
By using an RS 232 serial port cable
1. Connect the serial port cable to the computer where the T2000
Web LCT resides.
2. Route the serial port cable to the equipment side. Connect the RS
232 connector of the serial port cable to the RS 232 interface on
the front panel of the equipment.
-
7/28/2019 RTN 600 Configuration-A
29/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 28Page 28
Contents
Introduction to the T2000 Web
LCT
2.1 Main Characteristics
2.2 Application Scenario
2.3 Installation Guide
2.4 Connecting to NEs
2.5 Configuration Operations
-
7/28/2019 RTN 600 Configuration-A
30/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 29Page 29
Contents
Configuration Operations
2.5.1 Logging In to an NE
2.5.2 Modifying the NE ID
2.5.3 Configuring IF Protection
2.5.4 Setting IF Attributes
2.5.5 Setting RF Attributes
2.5.7 Configuring Service
2.5.7 Configuring SNCP Service
2.5.8 Converting service
2.5.9 Alarm
2.5.10 Performance
2.5.11 Communications and Security
-
7/28/2019 RTN 600 Configuration-A
31/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 30Page 30
Web LCT Configuration Logging In to an NE
Step1 Double-click the T2000 Web LCT shortcut icon on the desktop to launch the
T2000 Web LCT.
Step2 The User Login screen is displayed. Enter the user name and password. Click
Login.
-
7/28/2019 RTN 600 Configuration-A
32/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 31Page 31
Web LCT Configuration Logging In to an NE
Create an NE in one of the following two ways.
1. Click NE Search and specify the search criteria. Select the NE to be added
to create a new NE.
-
7/28/2019 RTN 600 Configuration-A
33/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 32Page 32
Web LCT Configuration Logging In to an NE
2. Create an NE directly. Click the Add NE and Enter the informationof the NE and create the NE.
-
7/28/2019 RTN 600 Configuration-A
34/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 33Page 33
Web LCT Configuration Logging In to an NE
Step 4: In the NE List, select the target NE and click NE Login.Then, the IE
displays the NE Login dialog box.
Step 5:Enter the User Name and the Password. Then, click OK.
-
7/28/2019 RTN 600 Configuration-A
35/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 34Page 34
Web LCT Configuration Modifying the NE ID
Step 1 In the NE Explorer, choose Configuration > NE Attribute from theFunction Tree. Click Modify NE ID.
-
7/28/2019 RTN 600 Configuration-A
36/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 35Page 35
Web LCT Configuration Modifying the NE ID
Step 2 Enter a new ID and click OK.
-
7/28/2019 RTN 600 Configuration-A
37/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 36Page 36
Web LCT Configuration Modifying the NE ID
Step 3 In the NE list, delete the original NE. Create a new NE with the newID.
-
7/28/2019 RTN 600 Configuration-A
38/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 37Page 37
Web LCT Configuration Configuring IF Protection
The supported IF protection is 1+1 HSB, 1+1 SD, and 1+1 FD.Create IF protection
Step 1 In the NE Explorer, choose Configuration > IF 1+1 Protection
from the Function Tree.
-
7/28/2019 RTN 600 Configuration-A
39/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 38Page 38
Web LCT Configuration Configuring IF Protection
Step 2 Click New and enter the information of the IF protection. Click OK orApply.
-
7/28/2019 RTN 600 Configuration-A
40/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 39Page 39
Web LCT Configuration Configuring IF Protection
Perform IF protection external switching. The priorities of externalswitching commands are as follows: clear, lockout, force, and manual.
-
7/28/2019 RTN 600 Configuration-A
41/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 40Page 40
Web LCT Configuration Setting IF Attributes
You can set the following IF attributes by using the T2000 Web LCT:
working mode, link ID, IF port loopback, 2 Mbit/s wayside service, andATPC-related information.
In the NE Explorer, select an IF board and choose IF Interface from the
Function Tree.
-
7/28/2019 RTN 600 Configuration-A
42/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 41Page 41
Web LCT Configuration Setting IF Attributes
You can enable automatic transmit power control (ATPC), and adjust
the threshold and the ATPC adjustment.
-
7/28/2019 RTN 600 Configuration-A
43/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 42Page 42
Web LCT Configuration Setting RF Attributes
By using the T2000 Web LCT, you can query and configure the following
RF attributes: transmit frequency, T/R spacing, transmitted power, ODUmanufacturer information, RF loopback status, and ODU status.
Frequency attributes
-
7/28/2019 RTN 600 Configuration-A
44/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 43Page 43
Web LCT Configuration Setting RF Attributes
Power attributes
-
7/28/2019 RTN 600 Configuration-A
45/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 44Page 44
Web LCT Configuration Setting RF Attributes
ODU manufacturer information
-
7/28/2019 RTN 600 Configuration-A
46/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 45Page 45
Web LCT Configuration Setting RF Attributes
In the Advanced Attributes tab, you set RF loopback and ODU status.
-
7/28/2019 RTN 600 Configuration-A
47/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 46Page 46
Web LCT Configuration Configuring a Service
This operation is applicable to VC4, VC3, and VC12 services.
Procedure
Step 1 In the NE Explorer, Configuration ->Cross-Connection
Configuration from the Function Tree.
-
7/28/2019 RTN 600 Configuration-A
48/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 47Page 47
Web LCT Configuration Configuring a Service
-
7/28/2019 RTN 600 Configuration-A
49/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 48Page 48
Web LCT Configuration Configuring a Service
Step 2 Click New, enter the information of a service and click OK orApply.
-
7/28/2019 RTN 600 Configuration-A
50/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 49Page 49
Web LCT Configuration Configuring an SNCP Service
This operation is applicable to VC12, VC3, and VC4 SNCP services.
Procedure
Step 1 In the Cross-Connection Configuration window, click Create SNCP.
Enter the information of an SNCP service.
-
7/28/2019 RTN 600 Configuration-A
51/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 50Page 50
Web LCT Configuration Configuring an SNCP Service
Step 2 After you create an SNCP service, the window is divided into two
panes. The upper pane displays the working service and the lower pane
displays the protection service. You can perform external switching for the
working and protection services.
-
7/28/2019 RTN 600 Configuration-A
52/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 51Page 51
Web LCT Configuration Converting a Service
The T2000 Web LCT supports the conversion between a normal service
and an SNCP service.
To convert a normal service to an SNCP service, select a normal
service, right-click and choose Convert to SNCP from the shortcut
menu. Enter the source of the service in the protection channel and
click OK.
-
7/28/2019 RTN 600 Configuration-A
53/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 52Page 52
Web LCT Configuration Converting a Service
You can convert the working or protection channel of an SNCP service to a
normal service.
To convert a working channel, right-click the service in the working channel
and choose SNCP Working Service Change to Normal Service from the
shortcut menu.
-
7/28/2019 RTN 600 Configuration-A
54/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 53Page 53
Web LCT Configuration Converting a Service
To convert a protection channel, right-click the service in the protection channeland choose SNCP Protection Service Change to Normal Service from the
shortcut menu.
-
7/28/2019 RTN 600 Configuration-A
55/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 54Page 54
Web LCT Configuration Alarm
By using the T2000 Web LCT, you can view the current and history
alarms, the reporting status of alarms for an NE and boards, and
abnormal events.
-
7/28/2019 RTN 600 Configuration-A
56/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 55Page 55
Web LCT Configuration PerformanceThe T2000 Web LCT supports 15-minute and 24-hour performance
monitoring intervals.
-
7/28/2019 RTN 600 Configuration-A
57/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 56Page 56
You can view the current and history performance data, UAT events,threshold crossings, and performance monitoring status. You can set the
performance threshold and reset a board registry.
Web LCT Configuration Performance
-
7/28/2019 RTN 600 Configuration-A
58/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 57Page 57
Web LCT Configuration Communications
The RTN 600 uses the OSP NE platform.
You can set multiple protocol stacks, including the OSI, IP, and
HWECC.
W b LCT C fi i C i i
-
7/28/2019 RTN 600 Configuration-A
59/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 58Page 58
Web LCT Configuration Communications
For DCC management, an IF board supports the configuration of
different DCC rates in different working modes. When the working mode is PDH, the configuration of one-byte DCC
(D1-D1) rate is supported.
When the working mode is SDH, the configuration of D1-D3, D4-D12,
D1-D12, and D1-D1 is supported.
-
7/28/2019 RTN 600 Configuration-A
60/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 59Page 59
Contents
1. Introduction to Management Systems
2. Introduction to T2000 Web LCT
3. Introduction to T2000
-
7/28/2019 RTN 600 Configuration-A
61/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 60Page 60
Contents
Introduction to T2000
3.1 Main Characteristics
3.2 Application Scenario
3.3 Configuration Operations
-
7/28/2019 RTN 600 Configuration-A
62/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 61Page 61
T2000 Main Characteristics
The T2000 consists of server and client.
The server is developed based on C++ and the client is based
on Java.
The T2000 manages a maximum of 1000 equivalent NEs and
supports concurrent operations of 32 clients.
T2000 server T2000 clientT2000 client
-
7/28/2019 RTN 600 Configuration-A
63/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 62Page 62
T2000 Main Characteristics
Modular architecture Open and integrated
High efficiency and reliability
-
7/28/2019 RTN 600 Configuration-A
64/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 63Page 63
Contents
Introduction to T2000
3.1 Main Characteristics
3.2 Application Scenario
3.3 Configuration Operations
-
7/28/2019 RTN 600 Configuration-A
65/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 64Page 64
T2000 Application Scenario
Subnet management system (SNMS)
Applicable to small and medium network management
Provides power NE management functions
Uniformly manage the RTN/SDH/ASON/MSTP/WDM
equipment
Provides the standard northbound interfaces and supports
OSS integration
iManager T2000
-
7/28/2019 RTN 600 Configuration-A
66/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 65Page 65
Contents
Introduction to T2000 3.1 Main Characteristics
3.2 Application Scenario
3.3 Configuration Operations
-
7/28/2019 RTN 600 Configuration-A
67/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 66Page 66
Contents
Configuration Operations
3.3.1 Microwave link
3.3.2 Alarm
3.3.3 Performance
3.3. 4 Linear MSP
T2000 Configuration Creating a Microwave
-
7/28/2019 RTN 600 Configuration-A
68/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 67Page 67
T2000 Configuration Creating a Microwave
Link
The T2000 allows you to create a Microwave link. You can view the
networking on the Main Topology.
Step 1 On the Main Topology, right-click and choose Microwave link
from the shortcut menu. Enter the information of the Microwave link.
T2000 Configuration Creating a Microwave
-
7/28/2019 RTN 600 Configuration-A
69/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 68Page 68
T2000 Configuration Creating a Microwave
Link Alternatively, click the icon on the toolbar to display the Create Link
window.
-
7/28/2019 RTN 600 Configuration-A
70/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 69Page 69
T2000 Configuration Creating a Microwave Link
Step 2 Click OK orApply. The link is displayed as follows:
When the source and the sink have different working modes, the link status is abnormal.
-
7/28/2019 RTN 600 Configuration-A
71/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 70Page 70
Current Alarm Statistics
An NE reports current alarms to the T2000.
You can filter alarms according to the report time of
alarms.
You can view alarm statistics in each NE.
-
7/28/2019 RTN 600 Configuration-A
72/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 71Page 71
Customizing Alarm Attributes
You can customize alarm functions, such as alarm severity, alarm
suppression, and alarm reporting.
The T2000 supports a maximum of 16 alarm templates.
-
7/28/2019 RTN 600 Configuration-A
73/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 72Page 72
Alarm Correlation Analysis and Suppression
A number of NE alarmsRoot alarm
Alarm analysis rule
Characteristics:
Retain the root alarms.
Suppress the non-root alarms. Customize the analysis rules.
Suppress non-
root alarms
Customizing Performance Threshold
-
7/28/2019 RTN 600 Configuration-A
74/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 73Page 73
Customizing Performance Threshold
The T2000 supports customization of a maximum
of 16 performance thresholds.
-
7/28/2019 RTN 600 Configuration-A
75/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 74Page 74
History Performance Analysis
The T2000 provides graphic history performance data analysis.
-
7/28/2019 RTN 600 Configuration-A
76/77
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 75Page 75
T2000 Configuration
The T2000 and T2000 Web LCT are the same in terms of serviceconfiguration, IF protection, IF and RF attributes, and communications.
Refer to the description in the T2000 Web LCT part.
-
7/28/2019 RTN 600 Configuration-A
77/77
Thank youwww.huawei.com