rubber band gun (no hardware required!) · this is an entirely 3d printed rubber band gun. it has...
TRANSCRIPT
22.25 hrs
2 pcs
f
0.25 mm
k
0.40 mm
h
81
197.00 g
d
MK3/S
Summary
This is an entirely 3D printed rubber band gun. It has no screws or glueand uses a 3D printed spring. The sides are held together with a tightpress fit.
It shoots a standard size rubberband (the cheapest full size available fromWalmart). Putting some wax on the moving components will help themmove smoother, but is not required.
Toys & Games > Other Toys & Games
toy rubberband
All components will fit on an MK3 build plate. Both PLA and PETG areknown to work, but other plastics may also work. PETG may requiresupports due to some overhangs.
Seth
Rubber Band Gun(No hardwarerequired!)
VIEW IN BROWSER
updated 20. 3. 2020 | published 19. 3. 2020
Print Files (.gcode) DOWNLOAD ALL FILES
13.8 MB
11.13 hrs f 0.25 mm k 0.40 mm h PET 98.60 g d MK3/S
updated 19. 3. 2020
13.5 MB
11.12 hrs f 0.25 mm k 0.40 mm h PLA 98.80 g d MK3/S
updated 19. 3. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
19.3 KBupdated 19. 3. 2020
15.5 KBupdated 19. 3. 2020
274.0 KBupdated 19. 3. 2020
392.1 KBupdated 19. 3. 2020
559.4 KBupdated 19. 3. 2020
694.0 KBupdated 19. 3. 2020
everything_025mm_petg_mk3_11h8m.gcode
everything_025mm_pla_mk3_11h7m.gcode
spring-v2.stl
connector_extender-3-v45.stl
trigger_trigger-v20.stl
extender_extender-3-v45.stl
catch_catch-2-v12.stl
upper-frame_.stl
643.5 KBupdated 19. 3. 2020
607.5 KBupdated 19. 3. 2020
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-ShareAlike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
lower-frame_lower-frame.stl
everything.3mf