sae flanges.pdf
DESCRIPTION
flangesTRANSCRIPT
FLA
NG
ES C
ATA
LO
GU
E
flanges australiaABN 68 010 906 251
fafafa
Book 1
TI
A
B
C
D
E
F
G
H
I
J
K
L
M
N
0
Contents
SAE Flange Clamps
SAE Female Threaded Flanges
SAE Male Threaded Flanges
SAE Socket Weld Flanges
SAE Butt Weld Flanges
SAE Flare Style Flanges
SAE Blanking Flanges
SAE Adaptor Flanges
Gear Pump Flanges
Din Series Flanges
CETOP Series Flanges
Flanges to ANSI B16.5
Flanges to BS4504
Flanges to AS2129
Flanges to JIS B2221-3
Technical Information
flanges australia
fafafa
Page 3
Page 5
Page 10
Page 19
Page 30
Page 38
Page 56
Page 59
Page 65
Page 75
Page 83
Page 93
Page 97
Page 104
Page 109
Page 118
flanges australia
fafafa
Section
Section
Book 1
Book 2
Technical Informationflanges australia
fafafa
Standards usedOur flanges are based on the following standards:
SAE flanges standard: SAE J 518 C, ISO 6162
CETOP flanges standard: CETOP RP 63H
4-bolt square flanges standard: ISO/DIS 6164
Pressure ratesThe maximum recommended working pressure is indicated for each single article.
Before selecting a part, please take notice of the pressure indications.
All pressure indications are based on a working temperature from -20˚ Celsius to +90˚ Celsius. Outside of this temperature range the physical properties of the material used are affected and the maximum recommended workingpressure is reduced.
The indicated working pressure refers only to the flange itself.
For the used pipe, fittings and connections the pressure indications of the specific manufacturer are the determining factors.
Material usedFor every single product group the material used is indicated. If several materials are shown, it is on the estimation of themanufacturer which material is used.
Surface protectionIf there is no special instruction on a product range all flanges are delivered in raw steel with protection fluid against rust.
Flange kitsAs required, all flange connections can be supplied with bolt set and o-ring.
The order code is shown on every product group as a sample.
Bolts used
SAE flangesmetric bolts: DIN 912-8.8 (ISO 4762-8.8) of
DIN 912-10.9 (ISO 4762-10.9)*1
UNC bolts: ASA B 18.3
gear pump flanges metric bolts: DIN 912-8.8 (ISO 4762-8.8)
4-bolt square flanges metric bolts: DIN 931/934-8.8 (ISO 4014/4017-8.8) orDIN 931/934-10.9 (ISO 4014/4017-10.9)*1
CETOP flanges metric bolts: DIN 931/934-8.8 (ISO 4014/4017-8.8) orDIN 931-10.9 (ISO 4014/4017-10.9)*1
*bolts with grade 10.9 are to be used when the material for the flanges is high tempered!
flanges australia
fafafa
Size
3/8”1/2”3/4”1”11/4”11/2”2”21/2”3”31/2”4”5”
Flangesize
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
3”
31/2”
4”
A
17.1218.6625.0039.9237.7047.2256.7569.4585.3298.02
110.72136.12
B
2.623.533.533.533.533.533.533.533.533.533.533.53
When o-rings differ from these dimensions, the specific article shows the precise dimension.
Flange pipe connectionsFor pipe connections with our flanges we recommend pipes which follow the following standard:
- seamless precision steel pipes according DIN 2391, grade C material ST 37-4 or ST 52-4
- seamless boiling pipes to DIN 2441, groups 1 and 2 out of material ST 37-4 and ST 52-4
- pipes according to ASA B36-10
For the flange sizes and pressure rates we recommend the following pipe dimensions:
pipes to DIN 2391 pipes to DIN 2448pipes to ASA B 36-10
100 bar
15x118x1
28x2
35x2
42x3
160 bar
18x1.5
250 bar
16x220x2.5
25x3
28x330x4
35x438x5
42x550x6
315 bar
16x2.520x3
25x3.5
30x5
38x6
50x8
65x8
80x10
400 bar
16x320x3.5
25x4
30x6
38x7
50x9
65x10
80x12.5
250 bar
21.3x2.6
26.9x2.6
33.7x4
42.4x5
48.3x5
60.3x6.3
76.1x8
88.9x10
101.6x10
114.3x12.5
400 bar
21.3x3.2
26.9x4
33.7x6.3
42.4x6.3
48.3x8
60.3x10
76.1x12.5
88.9x16
101.6x16
114.3x20
schedule
40
40
40
80
80
160
160
160
160
250
21.3x2.8
26.7x2.9
33.7x4.8
42.4x4.8
48.3x5.1
60.3x8.7
73x9.5
88.9x11.1
114.3x13.5
schedule
80
80
160
160
160
200
200
200
200
400
21.3x3.7
26.7x3.9
33.7x6.4
42.4x6.4
48.3x7.1
60.3x11.1
73x14
88.9x15.2
114.3x17.1
series series series
SealingsAll flange connections in this catalogue are sealed with an o-ring. The o-rings which are supplied by us are of the following materials:
- Buna 90 shore (standard)
- Viton 85-90 shore (option)
For all SAE and CETOP flanges the o-ring dimensions are according to the following table:
SAE Flange Clamps
Page No.
• SAE-split flange halves 1
• SAE-split flange halves - flat 2
• SAE-flange clamp 3
• SAE-flange clamp with tapped holes 4
flanges australia
fafafa
A
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
A B C D E F G H I L metric unc
nominalflangesize in
type
Material: 1. ST 52.3 (FE 510) Surface: zinc plated, yellow chromated
2. 316L/321 stainless
Order Code: ST 52.3 316L/321
-flange only FH-... FHx-...
SAE-split flange halves
A1
345345345276276276207207172138343434
420420420420420420420420
1/2”3/4”1”
11/4”11/4”11/4”11/2”2”
21/2”3”
31/2”4”5”
1/2”3/4”1”1”
11/4”11/4”11/2”2”
Code 613.000 P.S.I.FH 3001FH 3002FH 3003FH 3004FH 3014FH 3044FH 3005FH 3006FH 3007FH 3008FH 3009FH 3010FH 3011
Code 626.000 P.S.I.FH 6001FH 6002FH 6003FH 6013FH 6004FH 6044FH 6005FH 6006
30.9638.8945.2451.5951.5951.5961.0972.2484.94
102.39115.10127.79153.19
32.5442.0648.4148.4154.7654.7664.2980.16
24.2632.1338.4843.6943.6943.6950.8062.7474.9390.93
102.36115.06140.46
24.6432.5138.8638.8644.4544.4551.5667.56
38.1047.6352.3758.7258.7258.7269.8577.7788.90
106.38120.65130.18152.40
40.4950.8057.1757.1566.6866.6879.3896.82
54657079797994
10211435
152162184
567181819595
113133
8.7411.1313.0815.0915.0915.0917.8621.4425.4030.9634.9238.8846.04
9.1211.9113.8913.8915.8815.8818.2622.23
22.825.929.236.336.336.341.148.254.165.369.576.090.0
23.630.034.834.838.638.647.556.9
19222422222225263841283541
2228333338384352
13141616161616161922222528
1619242427273037
6.226.227.497.497.497.497.499.029.029.02
10.7210.7210.72
7.248.269.029.029.789.78
12.0712.07
8.510.510.51210.512.513.513.513.516.75171717
8.510.512.51214.513.516.7521
M 8x25M 10x30M 10x30M 10x35M 10x35M 12x35M 12x35M 12x35M 12x40M 16x45M 16x45M 16x50M 16x50
M 8x30M 10x35M 12x45
-M 14x50
-M 16x55M 20x65
5/16 x 11/4
3/8 x 11/4
3/8 x 11/4
7/16 x 11/2
--
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
5/8 x 25/8 x 25/8 x 25/8 x 2
5/16 x 11/4
3/8 x 11/2
-7/16 x 13/4
-1/2 x 13/4
5/8 x 23/4 x 21/2
0.070.090.110.150.150.150.230.250.370.650.750.841.25
0.080.180.270.270.400.400.681.05
flanges australia
fafafaSAE-split flange halves-flat
A2
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
A B C D E F H I L metric unc
nominalflangesize in
type
Material: C 60 Surface: zinc plated, yellow chromated
Order Code:
-flange only HF-...
345345345276207207
420420420420420420420420
1/2”3/4”1”
11/4”11/2”2”
1/2”3/4”1”
11/4”11/2”2”
21/2”3”
Code 613.000 P.S.I.HF 3001HF 3002HF 3003HF 3004HF 3005HF 3006
Code 626.000 P.S.I.HF 6001HF 6002HF 6003HF 6004HF 6005HF 6006HF 6007HF 6008
30.9638.8945.2451.5961.0972.24
32.5442.0648.4154.7664.2980.16
108.90132.50
24.2632.1338.4843.6950.8062.74
24.6432.5138.8644.4551.5667.5690.00
115.00
38.1047.6352.3758.7269.8577.77
40.4950.8057.1566.6879.3896.82
123.80152.40
5465707994
102
56718195
113133180215
8.7411.1313.0815.0917.8621.44
9.1211.9113.8915.8818.2622.2329.4035.80
22.825.929.236.641.148.2
23.630.034.838.647.556.975.0899.08
131416161616
1620252730374555
6.226.227.497.497.499.02
7.248.269.029.7812.0712.0720.5025.50
91111111313
911131517212632
M 8x25M 10x30M 10x30M 10x35M 12x35M 12x35
M 8x30M 10x35M 12x45M 14x45M 16x50M 20x65M 24x75M 30x90
5/16 x 11/4
3/8 x 11/4
3/8 x 11/4
-1/2 x 11/2
1/2 x 11/2
5/16 x 11/4
3/8 x 11/2
7/16 x 13/4
1/2 x 13/4
5/8 x 23/4 x 21/2
--
0.060.070.100.150.180.22
0.080.160.250.340.551.022.054.30
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
A B C D E F G H I L metric unc
nominalflangesize in
type
Material: 1. ST 52.3 (FE 510) Surface: zinc plated, yellow chromated
2. 316L/320 stainless
Order Code: ST 52.3 316/320
-flange only VF-... VFx-...
SAE-flange clamp
A3
34534534542027642020742020742017242038343434
420420420420420420420420420
1/2”3/4”1”1”
11/4”11/4”11/2”11/2”2”2”
21/2”21/2”3”
31/2”4”5”
1/2”3/4”1”1”
11/4”11/2”2”
21/2”3”
Code 613.000 P.S.I.VF 3001VF 3002VF 3003VF 3003-6000 psiVF 3004VF 3004-6000 psiVF 3005VF 3005-6000 psiVF 3006VF 3006-6000 psiVF 3007VF 3007-6000 psiVF 3008VF 3009VF 3010VF 3011
Code 626.000 P.S.I.VF 6001VF 6002VF 6003VF 6003-12VF 6004VF 6005VF 6006VF 6007VF 6008
30.9638.8945.2445.2451.5951.5961.0961.0972.2472.2484.9484.94
102.39115.10127.79153.19
32.5442.0648.4148.4154.7664.2980.16
108.90132.50
24.2632.1338.4838.4843.6943.6950.8050.8062.7462.7474.9374.9390.93
102.36115.06140.46
24.6432.5138.8638.8644.4551.5667.5690
115
38.1047.6352.3752.3758.7258.7269.8569.8577.7777.7788.9088.90
106.38120.65130.18152.40
40.4950.8057.1557.1566.6879.3896.82
123.80152.40
5465707179809495
102103114114135152162184
5671818195
113133180215
17.4822.2326.1926.1930.1830.1835.7135.7142.8842.8850.8050.8061.9369.8577.7792.08
18.2423.8027.7627.7631.7536.5044.4558.8071.60
45.651.858.460.72.67382.28396.497108.2108.2130.6139152180
47.26069.969.977.295113.8150.20198.16
19222426223325372643384941283541
222833333843524555
13141626162416271630193022222528
161924242730374555
6.226.227.497.497.497.497.497.499.029.029.029.029.0210.7210.7210.72
7.248.269.029.029.7812.0712.0720.5025.50
8.510.510.510.5121313.513.513.513.513.51516.75171717
8.510.512.51214.516.75212631
M 8x25M 10x30M 10x35M 10x45M 10x35M 12x45M 12x35M 12x50M 12x35M 12x50M 12x35M 14x50M 16x50M 16x50M 16x50M 16x50
M 8x30M 10x35M 12x45
-M 14x50M 16x55M 20x65M 24x75M 30x90
5/16 x 11/4
3/8 x 11/4
3/8 x 11/4
-7/16 x 11/2
-1/2 x 11/2
-1/2 x 11/2
-1/2 x 11/2
-
5/8 x 25/8 x 25/8 x 25/8 x 2
5/16 x 11/4
3/8 x 11/2
-7/16 x 13/4
1/2 x 13/4
5/8 x 23/4 x 21/2
--
0.150.170.220.430.300.640.450.960.501.380.741.751.301.501.652.50
0.160.350.530.530.801.352.104.108.60
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
dimensions
MA B C D E F G H I
nominalflangesize in
type
Material: 1. ST 52.3 (FE 510) Surface: zinc plated, yellow chromated
2. 1.4404316L/321 stainless
Order Code: ST 52.3 1.4404
-flange only VFG-... VFGx-...
SAE-flange clamp with tapped holes-metric
A4
345345345276207207172138343434
420420420420420420
1/2”3/4”1”
11/4”11/2”2”
21/2”3”
31/2”4”5”
1/2”3/4”1”
11/4”11/2”2”
Code 613.000 P.S.I.VFG 3001VFG 3002VFG 3003VFG 3004VFG 3005VFG 3006VFG 3007VFG 3008VFG 3009VFG 3010VFG 3011
Code 626.000 P.S.I.VFG 6001VFG 6002VFG 6003VFG 6004VFG 6005VFG 6006
30.9638.8945.2451.5961.0972.2484.94
102.39115.10127.79153.19
32.5442.0648.4154.7664.2980.16
24.2632.1338.4843.6950.8062.7474.9390.93
102.36115.06140.46
24.6432.5138.8644.4551.5667.56
38.1047.6352.3758.7269.8577.7788.90
106.38120.65130.18152.40
40.4950.8057.1566.6879.3896.82
5465707994
102114135152162184
56718195
113133
17.4822.2326.1930.1835.7142.8850.8061.9369.8577.7792.08
18.2423.8027.7631.7536.5044.45
45.651.858.472.682.296.4108.2130.6139152180
47.26069.977.295113.8
1922242225263841283541
222833384352
1314161416161922222528
161924273037
6.226.227.497.497.499.029.029.02
10.7210.7210.72
7.248.269.029.78
12.0712.07
M 8M 10M 10M 10M 12M 12M 12M 16M 16M 16M 16
M 8M 10M 12M 14M 16M 20
0.150.170.220.300.450.500.741.301.501.652.50
0.160.350.530.801.352.10
SAE Female Threaded Flanges
Page No.
• SAE-BSPP threaded flange - Code 61 1
• SAE-BSPP threaded flange - Code 62 2
• SAE-BSPP threaded flange - flat face 3
• SAE-NPT threaded flange 4
• SAE-NPT threaded flange - flat face 5
• SAE-UN ‘o’-ring threaded flange 6
• SAE-90˚ BSPP threaded flange 7
• SAE-90˚ NPT - threaded flange 8
flanges australia
fafafa
B
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G H I L
metric unc
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)
2. 1.4404316L stainless
Order Code: ST 44.3 1.4404
-flange only AFS-...G AFx-...G
-flange including metric bolts and o-ring AFS-...GM AFx-...GMx
-flange including UNC bolts and o-ring AFS-...GU AFx-... GUx
SAE-BSPP threaded flange
B1
34534534534534534534527627627627627620720720720720720720720717217213813834343434
1/2”1/2”3/4”3/4”1”1”1”
11/4”11/4”11/4”11/4”11/4”11/2”11/2”11/2”11/2”2”2”2”2”
21/2”21/2”3”3”
31/2”31/2”4”4”
Code 613.000 P.S.I.AFS 080 GAFS 080 G-038AFS 100 GAFS 100 G-012AFS 102 GAFS 102 G-034AFS 102 G-012AFS 104 GAFS 104 GAFS 104 G-100AFS 104 G-100AFS 104 G-034AFS 106 GAFS 106 G-114AFS 106 G-100AFS 106 G-034AFS 108 GAFS 108 G-112AFS 108 G-114AFS 108 G-100AFS 110 GAFS 110 G-200AFS 112 GAFS 112 G-212AFS 114 GAFS 114 G-300AFS 116 GAFS 116 G-312
R1/2”R3/8”R3/4”R1/2”R1”R3/4”R1/2”R11/4”R11/4”R1”R1”R3/4”R11/2”R11/4”R1”R3/4”R2”R11/2”R11/4”R1”R21/2”R2”R3”R21/2”R31/2”R3”R4”R31/2”
13131913251913323225251938322519513832256351736389739989
38.1038.1047.6347.6352.3752.3752.3758.7258.7258.7258.7258.7269.8569.8569.8569.8577.7777.7777.7777.7788.9088.90
106.38106.38120.65120.65130.18130.18
54546565707070797981817993959393
102102102102114114134134152152162162
17.4817.4822.2322.2326.1926.1926.1930.1830.1830.1830.1830.1835.7135.7135.7135.7142.8842.8842.8842.8850.8050.8061.9361.9369.8569.8577.7777.77
4646505055555568686565687878787890909090
105105124124136136146146
36363636383538414142424145454545454545455050505048484848
16161818182118212125252125272525252525252525272727272727
19191919221922222222222224242424302624263030343034343434
99111111111111.51311.51311.513.513.513.513.513.513.513.513.513.513.517.517.517.517.517.517.5
M 8x30M 8x30M 10x35M 10x35M 10x35M 10x35M 10x35M 10x40M 12x40M 10x40M 12x40M 10x40M 12x45M 12x45M 12x45M 12x45M 12x45M 12x45M 12x45M 12x45M 12x45M 12x45M 16x50M 16x50M 16x50M 16x50M 16x50M 16x50
5/16 x 11/4
5/16 x 11/4
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
7/16 x 11/2
-7/16 x 11/2
-7/16 x 11/2
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 25/8 x 25/8 x 25/8 x 25/8 x 2
0.250.280.390.420.460.490.520.660.660.750.750.791.051.101.161.231.191.251.401.441.401.452.152.252.402.502.853.00
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G H I L
metric unc
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)
2. 1.4404316L stainless
Order Code: ST 44.3 1.4404
-flange only AFS-...G AFx-...G
-flange including metric bolts and o-ring AFS-...GM AFx-...GMx
-flange including UNC bolts and o-ring AFS-...GU AFx-... GUx
SAE-BSPP threaded flange
B2
414414414414414414414414414414414414
131319132519322538325138
40.4940.4950.8050.8057.1557.1566.6866.6879.3879.3896.8296.82
Code 626.000 P.S.I.AFS 401 G-012AFS 401 G-038AFS 402 GAFS 402 G-012AFS 403 GAFS 403 G-034AFS 404 GAFS 404 G-100AFS 405 GAFS 405 G-114AFS 406 GAFS 406 G-112
1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”2”2”
R 1/2”R 3/8”R 3/4”R 1/2”R 1”R 3/4”R 11/4”R 1”R 11/2”R 11/4”R 2”R 11/2”
5454717181819595
112112134134
18.2418.2423.8023.8027.7627.7631.7531.7536.5036.5044.4544.45
46465555656578789494
114114
363635354242454550506565
161621212525272730303737
191922222424252528283030
991111131315*15*17172121
M 8x30M 8x30M 10x35M 10x35M 12x45M 12x45M 14x45M 14x45M 16x50M 16x50M 20x65M 20x65
5/16 x 1 1/4
5/16 x 1 1/4
3/8 x 1 1/2
3/8 x 1 1/2
7/16 x 1 3/4
7/16 x 1 3/4
1/2 x 13/4
1/2 x 1 3/4
5/8 x 25/8 x 2
3/4 x 2 1/2
3/4 x 2 1/2
0.260.290.500.550.760.801.201.301.651.752.452.55
*13.5 for UNC
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G H I
metric unc
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)
2.1.4404 stainless
Order Code: ST 44.3 1.4404
-flange with metric threads GFS-...GM GFx-...GM
-flange with UNC threads GFS-...GU GFx-...GU
SAE-BSPP threaded flange -flat face
B3
34534534534534534527627620720720720717217213813834343434
414414414414414414414414414414414414
1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”2”2”
21/2”21/2”3”3”
31/2”31/2”4”4”
1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”2”2”
Code 613.000 P.S.I.GFS 080 GGFS 080 G-038GFS 100 GGFS 100 G-012GFS 102 GGFS 102 G-034GFS 104 GGFS 104 G-100GFS 106 GGFS 106 G-114GFS 108 GGFS 108 G-112GFS 110 GGFS 110 G-200GFS 112 GGFS 112 G-212GFS 114 GGFS 114 G-300GFS 116 GGFS 116 G-312
Code 626.000 P.S.I.GFS 401 G-012GFS 401 G-038GFS 402 GGFS 402 G-012GFS 403 GGFS 403 G-034GFS 404 GGFS 404 G-100GFS 405 GGFS 405 G-114GFS 406 GGFS 406 G-112
R 1/2”R 3/8”R 3/4”R 1/2”R 1”R 3/4”R 11/4”R 1”R 11/2”R 11/4”R 2”R 11/2”R 21/2”R 2”R 3”R 21/2”R 31/2”R 3”R 3”R 31/2”
R 1/2”R 3/8”R 3/4”R 1/2”R 1”R 3/4”R 11/4”R 1”R 11/2”R 11/4”R 2”R 11/2”
1313191325193225383251386351736389739989
131319132519322538325138
38.1038.1047.6347.6352.3752.3758.7258.7269.8569.8577.7777.7788.9088.90
106.38106.38120.65120.65130.18130.18
40.4940.4950.8050.8057.1657.1666.6866.6879.3879.3896.8296.82
54546565707079819395102102114114134134152152162162
5454717181819595112112134134
17.4817.4822.2322.2326.1926.1930.1830.1835.7135.7142.8842.8850.8050.8061.9361.9369.8569.8577.7777.77
18.2418.2423.8023.8027.7627.7631.7531.7536.5036.5044.4544.45
464650505555686578789090105105124124136136146146
46465555656578789494114114
3636363638354142454545455050505048484848
363635354242454550506565
1616181818212125252725252525272727272727
161621212525272730303737
1919191922192222242430263030343034343434
191922222424252528283030
M 8M 8M10M10M10M10M10M10M12M12M12M12M12M12M16M16M16M16M16M16
M 8M 8M10M10M12M12M14M14M16M16M20M20
5/165/163/83/83/83/87/167/161/21/21/21/21/21/25/85/85/85/85/85/8
5/165/163/83/87/167/161/21/25/85/83/43/4
0.250.280.390.420.460.490.660.751.051.101.191.251.401.452.152.252.402.502.853.00
0.260.290.500.550.760.801.201.301.651.752.452.55
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G H I L
metric unc
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)
2. 1.4404316L stainless
Order Code: ST 44.3 1.4404
-flange only AFS-...N AFx-...N
-flange including metric bolts and o-ring AFS-...NM AFx-...NMx
-flange including UNC bolts and o-ring AFS-...NU AFx-...NUx
SAE-NPT threaded flange
B4
345345345345345345276276207207207207172138
3434
414414414414414414414414414414414414
1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”2”2”
21/2”3”
31/2”4”
1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”2”2”
Code 613.000 P.S.I.AFS 080 NAFS 080 N-038AFS 100 NAFS 100 N-012AFS 102 NAFS 102 N-034AFS 104 NAFS 104 N-100AFS 106 NAFS 106 N-104AFS 108 NAFS 108 N-112AFS 110 NAFS 112 NAFS 114 NAFS 116 N
Code 626.000 P.S.I.AFS 401 N-012AFS 401 N-038AFS 402 NAFS 402 N-012AFS 403 NAFS 403 N-034AFS 404 NAFS 404 N-100AFS 405 NAFS 405 N-114AFS 406 NAFS 406 N-112
1/2” NPT3/8” NPT3/4” NPT1/2” NPT1” NPT
3/4” NPT 11/4” NPT
1” NPT11/2” NPT11/4” NPT
2” NPT11/2” NPT21/2” NPT
3” NPT31/2” NPT
4” NPT
1/2” NPT3/8” NPT3/4” NPT1/2” NPT
1” NPT3/4” NPT
11/4” NPT1” NPT
11/2” NPT11/4” NPT
2” NPT11/2” NPT
13131913251932253832513863738999
131319132519322538325138
38.1038.1047.6347.6352.3752.3758.7258.7269.8569.8577.7777.7788.90
106.38120.65130.18
40.4940.4950.8050.8057.1557.1566.8866.8879.3879.3896.8296.82
54546565707079819395
102102114134152162
5454717181819595
112112134134
17.4817.4822.2322.2326.1926.1930.1830.1835.7135.7142.8842.8850.8061.9369.8577.77
18.2418.2423.8023.8027.7627.7631.7531.7536.5036.5044.4544.45
464650505555686578789090
105124136146
46465555656578789494
114114
36363636383541424545454550504848
363635354242454550506565
16161818182121252527252525272727
161621212525272730303737
19191919221922222424302630343434
191922222424252528283030
M 8 x 30M 8 x 30M 10 x 35M 10 x 35M 10 x 35M 10 x 35M 10 x 40M 10 x 40M 12 x 45M 12 x 45M 12 x 45M 12 x 45M 12 x 45M 16 x 50M 16 x 50M 16 x 50
M 8 x 30M 8 x 30M 10 x 35M 10 x 35M 12 x 45M 12 x 45M 14 x 45M 14 x 45M 16 x 50M 16 x 50M 20 x 65M 20 x 65
99
1111111111.511.513.513.513.513.513.517.517.517.5
99
1111131315*15*17172121
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
7/16 x 11/2
7/16 x 11/2
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 25/8 x 2
5/16 x 11/4
5/16 x 11/4
3/8 x 11/2
3/8 x 11/2
7/16 x 13/4
7/16 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 2
3/4 x 21/2
3/4 x 21/2
0.250.280.390.420.460.490.660.751.051.101.191.251.402.152.402.85
0.260.290.500.550.760.801.201.301.651.752.452.55
*13.5 for UNC Bolts
flanges australia
fafafaSAE-NPT threaded flange -flat face
B5
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G H I
metric unc
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)
2. 1.4404316L stainless
Order Code: ST 44.3 1.4404
-flange with metric threads GFS-...NM GFx-...NMx
-flange with UNC threads GFS-...NU GFx-...NUx
3453453453453453452762762072072072071721383434
414414414414414414414414414414414414
1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”2”2”
21/2”3”
31/2”4”
1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”2”2”
Code 613.000 P.S.I.GFS 80 NGFS 80 N-038GFS 100 NGFS 100 N-012GFS 102 NGFS 102 N-034GFS 104 NGFS 104 N-100GFS 106 NGFS 106 N-114GFS 108 NGFS 108 N-112GFS 110 NGFS 112 NGFS 114 NGFS 116 N
Code 626000 P.S.I.GFS 401 N-012GFS 401 N-038GFS 402 NGFS 402 N-012GFS 403 NGFS 403 N-034GFS 404 NGFS 404 N-100GFS 405 NGFS 405 N-114GFS 406 NGFS 406 N-112
1/2” NPT3/8” NPT3/4” NPT1/2” NPT1” NPT
3/4” NPT11/4” NPT
1” NPT11/2” NPT11/4” NPT
2” NPT11/2” NPT21/2” NPT
3” NPT31/2” NPT
4” NPT
1/2” NPT3/8” NPT3/4” NPT1/2” NPT1” NPT
3/4” NPT11/4” NPT
1” NPT11/2” NPT11/4” NPT
2” NPT11/2” NPT
13131913251932253832513863738999
131319132519322538325138
38.1038.1047.6347.6352.3752.3758.7258.7269.8569.8577.7777.7788.90
106.38120.65130.18
40.4940.4950.8050.8057.1557.1566.6866.6879.3879.3896.8296.82
54546565707079819395
102102114134152162
54547171818195 95
112112134134
17.4817.4822.2322.2326.1926.1930.1830.1835.7135.7142.8842.8850.8061.9369.8577.77
18.2418.2423.8023.8027.7627.7631.7531.7536.5036.5044.4544.45
464650505555686578789090
105124136146
46465555656578789494
114114
36363636383541424545454550504848
363635354242454550506565
16161818182121252527252525272727
161621212525272730303737
19191919221922222424302630 343434
191922222424252528283030
M 8M 8M 10M 10M 10M 10M 10M 10M 12M 12M 12M 12M 12M 16M 16M 16
M 8M 8M 10M 10M 12M 12M 14M 14M 16M 16M 20M 20
5/165/163/83/83/83/87/167/161/21/21/21/21/25/85/85/8
5/165/163/83/87/167/161/21/25/85/83/43/4
0.250.280.390.420.460.490.660.751.051.101.191.251.402.152.402.85
0.260.290.500.550.760.801.201.301.651.752.452.55
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G H I L U E Z
metric unc
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)
2. 1.4404316L stainless
Order Code: ST 44.3 1.4404
-flange only AFS-...T AFx-...T
-flange including metric bolts and o-ring AFS-...TM AFx-...TMx
-flange including UNC bolts and o-ring AFS-...TU AFx-... TUx
SAE-UN ‘o’-ringthreaded flange
B6
1/2”3/4”1”
11/4”11/2”
1/2”3/4”1”
11/4”11/2”
Code 613.000 P.S.I.AFS 080 TAFS 100 TAFS 102 TAFS 104 TAFS 106 T
Code 626.000 P.S.I.AFS 401 TAFS 402 TAFS 403 TAFS 404 TAFS 405 T
3/4”-16UNF11/16”-12UN15/16”-12UN15/8”-12UN17/8”-12UN
3/4”-16UNF11/16”-12UN15/16”-12UN15/8”-12UN17/8”-12UN
1319253238
1319253238
38.1047.6352.3758.7269.85
40.4950.8057.1566.6879.38
5465707993
54718195
112
17.4822.2326.1930.1835.71
18.2423.8027.7631.7536.50
4650556878
4655657894
3636384145
3635424550
345345345276207
414414414414414
1618182125
1621252730
1723232323
1723232323
9111111.513.5
9111315*17
20.629.235.543.549.8
20.629.335.543.549.8
2.53.33.33.33.3
2.53.33.33.33.3
15˚15˚15˚15˚15˚
15˚15˚15˚15˚15˚
M 8x30M 10x35M 10x35M 10x40M 12x45
M 8x30M 10x35M 12x45M 14x45M 16x50
5/16 x11/4
3/8 x11/2
3/8 x11/2
7/16 x11/2
1/2 x13/4
5/16 x11/4
3/8 x11/2
7/16 x13/4
1/2 x13/4
5/8 x2
0.250.390.460.661.05
0.260.500.761.201.65
*13.5 for UNC Bolts
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E H I L S1 S2F1 F2
metric unc
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)ST 52.3 (FE 510)
2. 1.4404316L stainless
Order Code: ST 44.3/52.3 1.4404
-flange only AFS-.../90 G AFx-.../90 G
-flange including metric bolts and o-ring AFS-.../90 GM AFx-.../90 GMx
-flange including UNC bolts and o-ring AFS-.../90 GU AFx-... /90 GUx
SAE-90˚ BSPPthreaded flange
B7
345345345345276207207
414414414414414414414
1/2”1/2”3/4”1”
11/4”11/2”2”
1/2”1/2”3/4”1”
11/4”11/2”2”
Code 613.000 P.S.I.AFS 080/90 GAFS 080/90 G-038AFS 100/90 GAFS 102/90 GAFS 104/90 GAFS 106/90 GAFS 108/90 G
Code 626.000 P.S.I.AFS 401/90 G-012AFS 401/90 G-038AFS 402/90 GAFS 403/90 GAFS 404/90 GAFS 405/90 GAFS 406/90 G
R1/2”R3/8”R3/4”R1”R11/4”R11/2”R2”
R1/2”R3/8”R3/4”R1”R11/4”R11/2”R2”
13131925323851
13131925323851
38.1038.1047.6352.3758.7269.8577.77
40.4940.4950.8057.1566.6879.3896.82
545465707993110
5454707993110134
17.4817.4822.2326.1930.1835.7142.88
18.2418.2423.8027.7631.7536.5044.50
606063708595110
6060708595110150
48485260738394
464656727594106
16161819212525
16161921252576.5
19191920222528
19192022252828
99111111.513.513.5
99111315*1721
20202428343842
20202834384260
37373843515665
37374351566592
M 8x30M 8x30M 10x35M 10x35M 10x40M 12x45M 12x45
M 8x30M 8x30M 10x35M 12x45M 14x50M 16x50M 20x110
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
7/16 x 11/2
1/2 x 13/4
5/8 x 2
5/16 x 11/4
5/16 x 11/4
3/8 x 11/2
7/16 x 13/4
1/2 x 13/4
5/8 x 2-
0.350.350.550.801.301.602.00
0.350.350.801.301.602.008.20
*13.5 for UNC Bolts
flanges australia
fafafaSAE-90˚ NPT - threaded flange
B8
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E H I L S1 S2F1 F2
metric unc
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)ST 52.3 (FE 510)
2. 1.4404316L stainless
*13.5 for UNC Bolts
345345345345276207207
414414414414414414
1/2”1/2”3/4”1”
11/4”11/2”2”
1/2”1/2”3/4”1”
11/4”11/2”
Code 613.000 P.S.I.AFS 080/90 NAFS 080/90 N-038AFS 100/90 NAFS 102/90 NAFS 104/90 NAFS 106/90 NAFS 108/90 N
Code 626.000 P.S.I.AFS 401/90 N-012AFS 401/90 N-038AFS 402/90 NAFS 403/90 NAFS 404/90 NAFS 405/90 N
1/2”NPT3/8”NPT3/4”NPT1”NPT11/4”NPT11/2”NPT2”NPT
1/2”NPT3/8”NPT3/4”NPT1”NPT11/4”NPT11/2”NPT
13131925323851
131319253238
38.1038.1047.6352.3758.7269.8577.77
40.4940.4950.8057.1566.6879.38
545465707993110
5454707993110
17.4817.4822.2326.1930.1835.7142.88
18.2418.2423.8027.7631.7536.50
606063708595110
6060708595110
48485260738394
464655727594
16161819212525
161619212525
19191920222528
191920222528
99111111.513.513.5
99111315*17
20202428343842
202028343842
37373843515665
373743515665
M 8x30M 8x30M 10x35M 10x35M 10x40M 12x45M 12x45
M 8x30M 8x30M 10x35M 12x45M 14x45M 16x50
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
7/16 x 11/2
1/2 x 13/4
5/8 x 2
5/16 x 11/4
5/16 x 11/4
3/8 x 11/2
7/16 x 13/4
1/2 x 13/4
5/8 x 2
0.350.350.550.801.301.602.00
0.350.350.801.301.602.00
Order Code: ST 44.3 1.4404
-flange only AFS-.../90 N AFx-.../90 N
-flange including metric bolts and o-ring AFS-.../90 NM AFx-.../90 NMx
-flange including UNC bolts and o-ring AFS-.../90 NU AFx-... /90 NUx
SAE Male Threaded Flanges
Page No.
• SAE- metric threaded flange 1DIN 3901/3902
• SAE- metric threaded flange 2DINB 3901/3902
• SAE- metric threaded flange 3DIN 3901/3902
• SAE-JIC threaded flange 4
• SAE-BSPP threaded flange 5
• SAE-flange adaptor 90˚ 6metric to DIN 3901/3902-forged
• SAE-flange adaptor 90˚ 7metric to DIN 3901/3902-forged
• SAE-flange adaptor 90˚ 8metric to DIN 3901/3902-brazed
• SAE-flange adaptor 90˚ 9JIC-threaded - forged
• SAE-flange adaptor 90˚ 10
flanges australia
fafafa
C
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F H I LG1 G2
metric unc
nominalflangesize in
type/tube o.d.
Material: 1. ST 44.3 (FE 430)
Order Code: ST 44.3
-flange only AFS-...G
-flange including metric bolts and o-ring AFS-...GM
-flange including UNC bolts and o-ring AFS-...GU
-including bolts (metr. or UNC), o-ringcutting ring and nut AFG-...MM (UM)
SAE- metric threaded flangeDIN 3901/3902
C1
315160345160160345345160160280160210
414414414414414414
1/2”3/4”3/4”1”1”1”1”
11/4”11/4”11/4”11/2”11/2”
1/2”3/4”1”
11/4”11/4”11/2”
Code 613.000 P.S.I.AFG 080 M/L 15AFG 100 M/L 22AFG 100 M/S 20AFG 102 M/L 22AFG 102 M/L 28AFG 102 M/S 20AFG 102 M/S 25AFG 104 M/L 28AFG 104 M/L 35AFG 104 M/S 30AFG 106 M/L 42AFG 106 M/S 38
Code 626.000 P.S.I.AFG 401 M/S 16AFG 402 M/S 25AFG 403 M/S 30AFG 404 M/S 38AFG 404 M/S 30AFG 405 M/S 38
M 22x1.5M 30x2M 30x2M 30x2M 36x2M 30x2M 36x2M 36x2M 45x2M 42x2M 52x2M 52x2
M 24x1.5M 36x2M 42x2M 52x2M 42x2M 52x2
121916192416202429253632
121925292532
38.1047.6347.6352.3752.3752.3752.3758.7258.7258.7269.8569.85
40.4950.8057.1566.6866.6879.38
546565707070707979799494
5671819595113
17.4822.2322.2326.1926.1926.1926.1930.1830.1830.1835.7135.71
18.2423.8027.7631.7531.7536.50
465050555555556868687878
486070787895
526060636363636565657070
607382929296
606973727276757476788285
708595107106111
131414161616161414141616
161924272730
77.510.57.57.510.5127.510.513.51116
8.51213.51613.516
911.511.511.511.511.511.511.511.511.513.513.5
911.51315*15*17.5
M 8x30M 10x30M 10x30M 10x30M 10x30M 10x30M 10x30M 10x35M 10x35M 10x35M 12x35M 12x35
M 8x30M 10x35M 12x45M 14x50M 14x50M 16x50
5/16 x11/4
3/8 x11/4
3/8 x11/4
3/8 x11/4
3/8 x11/4
3/8 x11/4
3/8 x11/4
7/16 x11/2
7/16 x11/2
7/16 x11/2
1/2 x11/2
1/2 x11/2
5/16 x11/4
3/8 x11/2
7/1 6x13/4
1/2 x13/4
1/2 x13/4
5/8 x2
0.250.350.360.440.500.460.520.680.720.701.001.02
0.300.681.001.601.542.20
*13.5 for UNC Bolts
Please Note: The maximum working pressure is fixed by SAE J 518 C on flange side or by the thread side to DIN 3861
DIN 3901/3902
flanges australia
fafafa
C2
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F SWI LA1 G1 G2
metric unc
nominalflangesize in
type/tube o.d.
Order Code: 9SMnPb28K 1.4571
-adaptor only SFCE-... SFCEx-...
-including split flanges,metric bolts and SFCE-...M(M) SFCEx-...Mx(M)o-ring (nut and cutting ring)
-including split flanges, UNC bolts and SFCE-...U(M) SFCEx-...Ux(M)o-ring(nut and cutting ring)
SAE- metric threaded flangeDIN 3901/3902
*1 hole diameter 10.5, 12.5 or 12.0 *2 bolt size M10x30 or M 12x40
Please Note: The maximum working pressure is fixed by SAE J 518 C on flange side or by the thread side to DIN 3861
DIN 3901/3902
Material: 1. 9SMnPb28K/C15 Surface: zinc plated, yellow chromated(mild steel)
2. 1.4571316 Ti stainless
315160350315160160350350160160350350160160280280280160210
1/2”1/2”1/2”3/4”3/4”3/4”3/4”3/4”1”1”1”1”
11/4”11/4”11/4”11/4”11/4”11/2”11/2”
Code 613.000 P.S.I.SFCE 3001/L15SFCE 3001/L22SFCE 3001/S16SFCE 3002/L18SFCE 3002/L22SFCE 3002/L28SFCE 3002/S20SFCE 3002/S25SFCE 3003/L22SFCE 3003/L28SFCE 3003/S25SFCE 3003/S30SFCE 3004/L28SFCE 3004/L35SFCE 3004/S25SFCE 3004/S30SFCE 3004/S38SFCE 3005/L42SFCE 3005/S38
M 22x1.5M 30x2M 24x1.5M 26x1.5M 30x2M 36x2M 30x2M 36x2M 30x2M 36x2M 36x2M 42x2M 36x2M 45x2M 36x2M42x2M 52x2M 52x2M 52x2
30.230.230.238.138.138.138.138.144.444.444.444.450.850.850.850.850.860.360.3
16/2013.51315/20191916/2017192420242230/3220/2725/28283632
38.1038.1038.1047.6347.6347.6347.6347.6352.3752.3752.3752.3758.7258.7258.7258.7258.7269.8569.85
54545465656565657070707079797979799494
17.4817.4817.4822.2322.2322.2322.2322.2326.1926.1926.1926.1930.1830.1830.1830.1830.1835.7135.71
45.645.645.651.851.851.851.851.858.458.458.458.472.672.672.672.672.682,282.2
48.253.150.253.253.253.257.257.256.254.258.263.258.658.260.262.266.664.270.2
56626062626268696365707667697275817685
77.58.57.57.57.5
10.5127.57.5
1213.57.510.51213.5161116
8.58.58.5
10.510.510.510.510.510.510.510.510.5
*1*1*1*1*1
13.513.5
24272430303030302736363636414141464646
M 8x30M 8x30M 8x30M 10x35M 10x35M 10x35M 10x35M 10x35M 10x35M 10x35M 10x35M 10x35
*2*2*2*2*2
M 12x40M 12x40
5/16 x11/4
5/16 x11/4
5/16 x11/4
3/8 x11/2
3/8 x11/2
3/8 x11/2
3/8 x11/2
3/8 x11/2
3/8 x11/2
3/8 x11/2
3/8 x11/2
3/8 x11/2
7/16 x11/2
7/16 x11/2
7/16 x11/2
7/16 x11/2
7/16 x11/2
1/2 x11/2
1/2 x11/2
0.290.470.320.550.560.750.630.760.600.690.780.911.051.101.171.191.391.341.50
flanges australia
fafafa
C3
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F SWI LA1 G1 G2
metric unc
nominalflangesize in
type/tube o.d.
Order Code: 9SMnPb28K 1.4571
-adaptor only SFCE-... SFCE-x-...
-including split flanges,metric bolts and SFCE-...M(M) SFCE-x-...Mx(m)o-ring (nut and cutting ring)
-including split flanges, UNC bolts and SFCE-...U(M) SFCE-x-...Ux(M)o-ring (nut and cutting ring)
SAE- metric threaded flangeDIN 3901/3902
*1 hole diameter 10.5 or 12.5 *2 hole diameter 13.5 or 14.5
Please Note: The maximum working pressure is fixed by SAE J 518 C on flange side or by the thread side to DIN 3861
DIN 3901/3902
Material: 1. 9SMnPb28K/C15 Surface: zinc plated, yellow chromated(mild steel)
2. 1.4571316 Ti stainless
400400400400400400400400350350
1/2”3/4”3/4”3/4”3/4”1”1”
11/4”11/4”11/2”
Code 626.000 P.S.I.SFCE 6001/S16SFCE 6002/S16SFCE 6002/S20SFCE 6002/S25SFCE 6002/S30SFCE 6003/S25SFCE 6003/S30SFCE 6004/S30SFCE 6004/S38SFCE 6005/S38
M 24x1.5M 24x1.5M 30x2M 36x2M 42x2M 36x2M 42x2M 42x2M 52x2M 52x2
31.741.341.341.341.347.647.6545463.5
18.2423.8023.8023.8023.8027.7627.7631.7531.7536.50
53.259.261.263.26472.27479.283.289.2
47.26060606069.669.677.277.295
40.4950.8050.8050.8050.8057.1557.1566.6866.6879.38
1212161718202425/303030
567171717181819595113
24303030364141414646
636972757784879298
104
8.58.510.51213.51213.513.51616
8.510.510.510.510.5
*1*1*2*2
16.75
M 8x30M 10x35M 10x35M 10x35M 10x35M 12x45M 12x45M 14x50M 14x50M 16x55
5/16 x11/4
3/8 x11/2
3/8 x11/2
3/8 x11/2
3/8 x11/2
7/16 x13/4
7/16 x13/4
1/2 x13/4
1/2 x13/4
1/2 x13/4
0.460.780.840.961.201.421.521.932.083.03
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G H L
metric unc
nominalflangesize in
type
Material: ST 44.3 (FE 430)
Order Code: ST 44.3
-flange only AFG-...
-flange including metric bolts and o-ring AFG-...M
-flange including UNC bolts and o-ring AFG-...U
SAE-JIC threaded flange
C4
345345345345276276207
414414414414414414414
1/2”1/2”3/4”1”
11/4”11/4”11/2”
1/4”1/2”3/4”1”
11/4”11/4”11/2”
Code 613.000 P.S.I.AFG 080 JIC 3/4
AFG 080 JIC 7/8
AFG 100 JIC 11/16
AFG 102 JIC 15/16
AFG 104 JIC 15/8
AFG 104 JIC 15/16
AFG 106 JIC 17/8
Code 626.000 P.S.I.AFG 401 JIC 3/4
AFG 401 JIC 7/8
AFG 402 JIC 11/16
AFG 403 JIC 15/16
AFG 404 JIC 15/8
AFG 404 JIC 15/16
AFG 405 JIC 17/8
1/4” 16 JIC7/8 14 JIC
11/16” 12 JIC15/16”12 JIC15/8”12 JIC
15/16” 12 JIC17/8” 12 JIC
1/4” 16 JIC7/8 14 JIC
11/16” 12 JIC15/16”12 JIC15/8”12 JIC
15/16” 12 JIC17/8” 12 JIC
9.912.315.521.527.521.533.0
9.912.315.521.527.521.533.0
38.1038.1047.6352.3758.7258.7269.85
40.4940.4950.8057.1566.6866.6879.38
54546570797994
565671819595113
17.4817.4822.2326.1930.1830.1835.71
18.2418.2423.8027.7631.7531.7536.50
46465055686878
48486070787895
52526063656570
60607382929296
13131416141416
16161924272730
9911.511.511.511.513.5
9911.51315*15*17.5
M 8x30M 8x30M 10x30M 10x30M 10x30M 10x30M 12x35
M 8x30M 8x30M 10x35M 12x45M 14x50M 14x50M 16x50
5/16 x 11/4
3/8 x 11/4
3/8 x 11/4
3/8 x 11/4
7/16 x 11/2
7/16 x 11/2
1/2 x 11/2
5/16 x 11/4
5/16 x 11/4
1/8 x 11/2
7/16 x 11/4
1/2 x 11/4
1/2 x 11/4
5/8 x 2
0.250.300.350.500.700.701.00
0.300.400.701.001.501.502.30
*L=13.5 for UNC Bolts
flanges australia
fafafaSAE-BSPP threaded flange
C5
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G H L
metric unc
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)
Order Code: ST 44.3
-flange only AFS-...
-flange including metric bolts and o-ring AFS-...M
-flange including UNC bolts and o-ring AFS-...U
*L=13.5 for UNC Bolts
345345345276207
414414414414414
1/2”3/4”1”
11/4”11/2”
1/2”3/4”1”
11/4”11/2”
Code 613.000 P.S.I.AFS 080 BTMAFS 100 BTMAFS 102 BTMAFS 104 BTMAFS 106 BTM
Code 626.000 P.S.I.AFS 401 BTMAFS 402 BTMAFS 403 BTMAFS 404 BTMAFS 405 BTM
1/2” BSPP3/4” BSPP1” BSPP
11/4” BSPP11/2” BSPP
1/2” BSPP3/4” BSPP1” BSPP
11/4” BSPP11/2” BSPP
9.915.521.527.533.0
12.315.521.527.533.0
38.1047.6352.3758.7269.85
40.4950.8057.1566.6879.38
5465707994
56718195113
17.4822.2326.1930.1835.71
18.2423.8027.7631.7536.50
4650556878
4860707895
5260636570
6073829296
1314161416
1619242730
911.511.511.513.5
911.51315*17.5
M 8x30M 10x30M 10x30M 10x30M 12x35
M 8x30M 10x35M 12x45M 14x50M 16x50
5/16 x 11/4
3/8 x 11/4
3/8 x 11/4
7/16 x 11/2
1/2 x 11/2
5/16 x 11/4
1/8 x 11/2
7/16 x 11/4
1/2 x 11/4
5/8 x 2
0.250.350.500.701.00
0.400.701.001.502.30
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA C D E I L S1F2F1 S2 S3B1 B2
nominalflangesize in
SAE type - metriccompression
Material: 1. ST 52.3 (FE 510) Surface: zinc plated, yellow chromated
2. 1.4571316T stainless
SAE-flange adaptor 90˚-metric to DIN 3901/3902-forged
C6
315350315160350350160350350160280280280160210
1/2”1/2”3/4”3/4”3/4”3/4”1”1”1”
11/4”11/4”11/4”11/4”11/2”11/2”
Code 613.000 P.S.I.WFG 3001/L15WFG 3001/S16WFG 3002/L18WFG 3002/L22WFG 3002/S20WFG 3002/S25WFG 3003/L28WFG 3003/S25WFG 3003/S30WFG 3004/L35WFG 3004/S25WFG 3004/S30WFG 3004/S38WFG 3005/L42WFG 3005/S38
M 22 x 1.5M 24 x 1.5M 26 x 1.5M 30 x 2M 30 x 2M 36 x 2M 36 x 2M 36 x 2M 42 x 2M 45 x 2M 36 x 2M 42 x 2M 52 x 2M 52 x 2M 52 x 2
121215191617242024302025283632
111119191919252525272727273636
38.1038.1047.6347.6347.6347.6352.3752.3752.3758.7258.7258.7258.7269.8569.85
545464.964.964.964.969.969.969.979.479.479.479.493.893.8
17.4817.4822.2322.2322.2322.2326.1926.1926.1930.1830.1830.1830.1835.7135.71
66.870.873.975.979.982.982.291.292.2104.3103.3106.3110.3118.2128.2
45.645.651.851.851.851.858.458.458.472.672.672.672.682.482.4
78.57.57.510.5127.51213.510.51213.5161116
8.58.510.510.510.510.510.510.510.5
*1*1*1*1
13.513.5
393942424242454545505050507676
2929.531.533.532.53336.53836.546.54343.5435656
444848505457536263686770747787
M 8x30M 8x30M 10x35M 10x35M 10x35M 10x35M 10x35M 10x35M 10x35
*2*2*2*2
M 12x40M 12x40
0.390.430.630.660.710.840.820.941.021.191.401.481.551.972.12
Order Code: ST 52.3 1.4571
- only 90˚ elbow WFG... WFG-x...
- including split flanges, bolts and o-ring WFG...M WFG-x....MX
- including split flanges, bolts, o-ring, WFG...MM WFG-x....MMXcutting ring and nut
*1 Bolt hole dia. 10.5 or 12.5
*2 Bolt size M10x30 or M12x40
Please note: The maximum working pressure is fixed by SAE J 518 C on flange side to DIN 3861
DIN 3901/3902
flanges australia
fafafa
C7
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA C D E I L S1F2F1 S2 S3B1 B2
nominalflangesize in
SAE type - metriccompression
Material: 1. ST 52.3 (FE 510) Surface: zinc plated, yellow chromated
2. 1.4571316T stainless
SAE-flange adaptor 90˚-metric to DIN 3901/3902-forged
Order Code: ST 52.3 1.4571
- only 90˚ elbow WFG... WFGx-...
- including split flanges, bolts and o-ring WFG...M WFGx-....MX
- including split flanges, bolts and o-ring WFG...MM WFGx-....MMXcutting ring and nut
Please note: The maximum working pressure is fixed by SAE J 518 C on flange side or by the thread side to DIN 3861
400400400400400400400350350
1/2”3/4”3/4”3/4”1”1”
11/4”11/4”11/2”
Code 626.000 P.S.I.WFG 6001/S16WFG 6002/S16WFG 6002/S20WFG 6002/S25WFG 6003/S25WFG 6003/S30WFG 6004/S30WFG 6004/S38WFG 6005/S38
M 24 x 1.5M 24 x 1.5M 30 x 2M 36 x 2M 36 x 2M 42 x 2M 42 x 2M 52 x 2M 56 x 2
121216172024252830
121717172424313136
40.4950.8050.8050.8057.1557.1566.6866.6879.38
56.471.371.371.3818195.295.2112.8
18.2423.8023.8023.8027.7627.7631.7531.7536.5
71.685879099.8102.85109.6114.6134.5
47.2606060696977.277.295
8.58.510.5121213.513.51616
8.510.510.510.512.512.514.514.516.5
394848486060686876
29.436.535.5364141.544.54556
485557606568717687
M 8x30M 10x35M 10x35M 10x35M 12x45M 12x45M 14x50M 14x50M 16x55
0.690.920.961.091.601.702.222.323.55
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA C D E F SWI LS1 S2 S3A1
metric unc
nominalflangesize in
SAE type - metriccompression
Material: 9SMPb28K/ST37 Surface: zinc plated, yellow chromated
C8
SAE-flange adaptor 90˚-metric to DIN 3901/3902-brazed
315350160160350350160160210
400400400400400315315
1/2”1/2”3/4”1”1”1”
11/4”11/2”11/2”
1/2”3/4”3/4”1”1”
11/4”11/2”
Code 613.000 P.S.I.SFCE-3001-90/L15SFCE-3001-90/S16SFCE-3002-90/L22SFCE-3003-90/L28SFCE-3003-90/S25SFCE-3003-90/S30SFCE-3004-90/L35SFCE-3005-90/L42SFCE-3005-90/S38
Code 626.000 P.S.I.SFCE-6001-90/S16SFCE-6002-90/S25SFCE-6002-90/S30SFCE-6003-90/S25SFCE-6003-90/S30SFCE-6004-90/S38SFCE-6005-90/S38
M 22x1.5M 24x1.5M 30x2M 36x2M 36x2M 42x2M 45x2M 52x2M 52x2
M 24x1.5M 36x2M 42x2M 36x2M 42x2M 52x2M 52x2
30.230.238.144.444.444.450.860.360.3
31.841.341.347.647.65463.5
38.1038.1047.6352.3752.3752.3758.7269.8569.85
40.4950.8050.8057.1557.1566.6879.38
545465707070799494
567171818195113
17.4817.4822.2326.1926.1926.1930.1835.7135.71
18.2423.8023.8027.7627.7631.7536.50
45.645.651.858.458.458.472.682.682.6
47.2606069.669.677.295
77.57.57.51213.510.51116
8.51213.51213.51616
404059686868869898
406262747496
111
4342.563.575.57169.594.510499
41.55957.57371.59191
586080809596
116127130
6083849798
122122
222430363646465555
24364636465555
8.58.510.510.510.510.5
*113.513.5
8.510.510.5
*3*3*4
16.75
M 8x30M 8x30M 10x35M 10x35M 10x35M 10x35
*2M 12x35M 12x35
M 8x30M 10x35M 10x35M 12x45M 12x45M 14x50M 16x55
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
7/16 x 11/2
1/2 x 11/2
1/2 x 11/2
5/16 x 11/4
3/8 x 11/2
3/8 x 11/2
7/16 x 13/4
7/16 x 13/4
1/2 x 13/4
5/8 x 2
0.140.150.290.430.380.550.760.990.95
0.160.370.490.430.590.951.13
Order Code:
- adapter only SFCE-...
- including split flanges, metric bolts and o-ring SFCE-...M(M)(nut and cutting ring)
- including split flanges, UNC bolts and o-ring SFCE-...U(M)(nut and cutting ring)
*1. Hole dia. 10.5, 12.5 or 12.0
*2. Bolt size M10x30 or M12x40
*3. Hole dia. 12.0 or 12.5
*4. Hole dia. 13.5 or 14.5
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA C D E LS2S1F1 F2B1 B2
metric unc
nominalflangesize in
type
C9
SAE-flange adaptor 90˚JIC-threaded - forged
345345345345345345345345276276207207
1/2”1/2”3/4”3/4”3/4”1”1”1”
11/4”11/4”11/2”11/2”
Code 613.000 P.S.I.WFG 3001 JIC 3/4
WFG 3001 JIC 7/8
WFG 3002 JIC 7/8
WFG 3002 JIC 11/16
WFG 3002 JIC 15/16
WFG 3003 JIC 11/16
WFG 3003 JIC 15/16
WFG 3003 JIC 15/8
WFG 3004 JIC 15/16
WFG 3004 JIC 15/8
WFG 3005 JIC 15/8
WFG 3005 JIC 17/8
3/4-16 JIC7/8-14 JIC7/8-14 JIC
11/16-12 JIC15/16-12 JIC11/16-12 JIC15/16-12 JIC15/8-12 JIC15/16-12 JIC15/8-12 JIC15/8-12 JIC17/8-12 JIC
9.912.312.315.521.515.521.527.521.527.527.533.0
131319191924242431313838
38.1038.1047.6347.6347.6352.3752.3752.3758.7258.7269.8569.85
545465656570707079799494
17.4817.4822.2322.2322.2326.1926.1926.1930.1830.1835.7135.71
60.860.870.970.970.979.279.279.285.385.3117.1117.1
45.645.651.851.851.858.458.458.472.672.682.282.2
383842424245454550507676
383845454550505059597676
8.58.510.510.510.510.510.510.5
*1*1
13.513.5
M 8x30M 8x30M 10x35M 10x35M 10x35M 10x35M 10x35M 10x35
*2*2
M 12x40M 12x40
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
3/8 x 11/2
3/8 x11/2
3/8 x 11/2
3/8 x 11/2
7/16 x 11/2
7/16 x 11/2
1/2 x 11/2
1/2 x 11/2
0.340.400.600.630.660.800.850.891.161.271.902.05
Order Code: ST 52.3 1.4571
- only 90˚ elbow WFG-... WFG-x-...
- including split flanges, metric bolts and o-ring WFG-...M WFG-x-...Mx
- including split flanges, UNC bolts and o-ring WFG-...U WFG-x-...Ux
1. Hole dia. 10.5, 12.5, 12.0
2. Bolt size M10x30 or M12x40
Material: 1. ST 52.3 (FE 510) Surface: zinc plated, yellow chromated
2. 1.4571316T stainless
flanges australia
fafafa
C10
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA C D E LS2S1F1 F2B1 B2
metric unc
nominalflangesize in
type
SAE-flange adaptor 90˚JIC-threaded - forged
Order Code: ST 52.3 1.4571
- only 90˚ elbow WFG-... WFG-x-...
- including split flanges, metric bolts and o-ring WFG-...M WFG-x-...Mx
- including split flanges, UNC bolts and o-ring WFG-...U WFG-x-...Ux
*3. Hole dia. 12.0, or 12.5
*4. Hole dia. 13.5 or 14.5
414414414414414414414414414414414414414
1/2”1/2”3/4”3/4”3/4”1”1”1”11/4”11/4”11/4”11/2”11/2”
Code 626.000 P.S.I.WFG 6001 JIC 3/4
WFG 6001 JIC 7/8
WFG 6002 JIC 7/8
WFG 6002 JIC 11/16
WFG 6002 JIC 15/16
WFG 6003 JIC 11/16
WFG 6003 JIC 15/16
WFG 6003 JIC 15/8
WFG 6004 JIC 15/16
WFG 6004 JIC 15/8
WFG 6004 JIC 17/8
WFG 6005 JIC 15/8
WFG 6005 JIC 17/8
9.912.312.315.521.515.521.527.521.527.533.027.533.0
13131717172424243030303232
40.4940.4950.8050.8050.8057.1557.1557.1566.6866.6866.6879.3879.38
5656717171818181959595
113113
18.2418.2423.8023.8023.8027.7627.7627.7631.7531.7531.7536.5036.50
61.661.6787878999999115.5115.5115.5133133
47.247.260606069.969.969.977.277.277.29595
39394848486060606868687676
38384848486060606868687676
8.58.510.510.510.5*3*3*3*4*4*416.516.5
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
3/8 x11/2
7/16 x 13/4
7/16 x 13/4
7/16 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 2
0.370.450.880.971.021.461.571.702.202.302.453.083.45
3/4-16 JIC7/8-14 JIC7/8-14 JIC11/16-12 JIC15/16-12 JIC11/16-12 JIC15/16-12 JIC15/8-12 JIC15/16-12 JIC15/8-12 JIC17/8-12 JIC15/8-12 JIC17/8-12 JIC
M 8x30M 8x35M 10x35M 10x35M 10x35M 12x45M 12x45M 12x45M 14x50M 14x50M 14x50M 16x55 M 16x55
Material: 1. ST 52.3 (FE 510) Surface: zinc plated, yellow chromated
2. 1.4571316T stainless
SAE Socket Weld Flanges
Page No.
• SAE-socket weld flange 1
• SAE-socket weld flange - flat face 2
• SAE-socket weld coupling 3
• SAE-socket weld flange 500 PSI 4
• SAE-socket weld flange 500 P.S.I. 5- flat face
• SAE-socket weld flange 500 P.S.I. 6- coupling
• SAE-socket weld flange 90˚ 7
flanges australia
fafafa
D
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G H I L
metric unc
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)
2. 1.4404316L stainless
Order Code: ST 44.3 1.4404
-flange only AFS-...S AFx-...S
-flange including metric bolts and o-ring AFS-...SM AFx-...SMx
-flange including UNC bolts and o-ring AFS-...SU AFx-... SUx
SAE-socket weld flange
D1
3453453453453453453453453453452762762762072072072072071721383434
414414414414414414414414414414414414
1/2”1/2”1/2”1/2”3/4”3/4”3/4”1”1”1”
11/4”11/4”11/4”11/2”11/2”11/2”2”2”
21/2”3”
31/2”4”
1/2”1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”2”
Code 613.000 P.S.I.AFS 080 S NBAFS 080 SODAFS 080 S-038AFS 080 S A20AFS 100 S NBAFS 100 SODAFS 100 S A25AFS 102 S NBAFS 102 SODAFS 102 S A30AFS 104 S NBAFS 104 SODAFS 104 S A38AFS 106 S NBAFS 106 SODAFS 106 S A50AFS 108 SNBAFS 108 SODAFS 110 SNBAFS 112 SNBAFS 114 SNBAFS 116 SNBCode 626.000 P.S.I.AFS 401 S-012AFS 401 S-038AFS 401 S A20AFS 402 S NBAFS 402 S A25AFS 403 S NBAFS 403 S A30AFS 404 S NBAFS 404 S A38AFS 405 S NBAFS 405 S A50AFS 406 S NB
21.612.817.520.327.219.225.334.025.530.342.832.038.348.638.250.561.051.073.290.5
103.0115.5
21.617.520.327.225.334.030.342.838.348.650.561.0
13131313191919252525323232383838515163738999
131313191925253232383851
38.1038.1038.1038.1047.6347.6347.6352.3752.3752.3758.7258.7258.7269.8569.8569.8577.7777.7788.90
106.38120.65130.18
40.4940.4940.4950.8050.8057.1557.1566.6866.6879.3879.3896.82
54565454656565707070797979939393
102102114134152162
545454717181819595
112112134
17.4817.4817.4817.4822.2322.2322.2326.1926.1926.1930.1830.1830.1835.7135.7135.7142.8842.8850.8061.9369.8577.77
18.2418.2418.2423.8023.8027.7627.7631.7531.7536.5036.5044.45
464646465048505552556868687876789088
105124136146
4646465555656578789494
114
36363636363636383838414141454445454550504848
363636353542424545505065
16161616181818181818212121252525252525272727
161616212125252727303037
19181919191819191819222022242224262430343434
191919222222222525282824
M 8x30M 8x30M 8x30M 8x30M 10x35M 10x35M 10x35M 10x35M 10x35M 10x35M 10x40M 10x40M 10x40M 12x45M 12x45M 12x45M 12x45M 12x45M 12x45M 16x50M 16x50M 16x50
M 8x30M 8x30M 8x30M 10x35M 10x35M 12x45M 12x45M 14x45M 14x45M 16x50M 16x50M 20x65
999911111111111111.51111.513.513.513.513.513.513.517.517.517.5
9991111131315*15*17.517.521
5/16 x 11/4
-
5/16 x 11/4
5/16 x 11/4
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
7/16 x 11/2
7/16 x 11/2
7/16 x 11/2
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 25/8 x 2
5/16 x 11/4
5/16 x 11/4
5/16 x 11/4
3/8 x 11/2
3/8 x 11/2
7/16 x 13/4
7/16 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 2
5/8 x 21/2
0.25
0.280.250.39
0.390.46
0.460.66
0.661.05
1.051.19
1.402.152.402.85
0.260.290.260.500.500.760.761.201.201.651.652.45
*13.5 for UNC Bolts
flanges australia
fafafaSAE-socket weld flange-flat face
D2
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G H I
metric unc
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)
2. 1.4404316L stainless
3453453453453453453453453453452762762762072072072072071721383434
414414414414414414414414414414414414
1/2”1/2”1/2”1/2”3/4”3/4”3/4”1”1”1”
11/4”11/4”11/4”11/2”11/2”11/2”2”2”
21/2”3”
31/2”4”
1/2”1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”2”
Code 613.000 P.S.I.GFS 080 S NBGFS 080 SOD*GFS 080 S-038GFS 080 S A20GFS 100 S NBGFS 100 SOD*GFS 100 S A25GFS 102 S NBGFS 102 SOD*GFS 102 S A30GFS 104 S NBGFS 104 SOD*GFS 104 S A38GFS 106 S NBGFS 106 SOD*GFS 106 S A50GFS 108 S NBGFS 108 SOD*GFS 110 S NBGFS 112 S NBGFS 114 S NBGFS 116 S NBCode 626.000 P.S.I.GFS 401 S-012GFS 401 S-038GFS 401 S A20GFS 402 S NBGFS 402 S A25GFS 403 S NBGFS 403 S A30GFS 404 S NBGFS 404 S A38GFS 405 S NBGFS 405 S A50GFS 406 S NB
21.612.817.520.327.219.225.334.025.530.342.832.038.348.638.250.561.051.073.290.5103.0115.5
21.617.520.327.225.334.030.342.838.348.650.561.0
13131313191919252525323232383838515163738999
131313191925253232383851
38.1038.1038.1038.1047.6347.6347.6352.3752.3752.3758.7258.7258.7269.8569.8569.8577.7777.7788.90
106.38120.65130.18
40.4940.4940.4950.8050.8057.1557.1566.6866.6879.3879.3896.82
54565454656565707070797979939393
102102114134152162
545454717181819595
112112134
17.4817.4817.4817.4822.2322.2322.2326.1926.1926.1930.1830.1830.1835.7135.7135.7142.8842.8850.8061.9369.8577.77
18.2418.2418.2423.8023.8027.7627.7631.7531.7536.5036.5044.45
464646465048505552556868687876789088
105124136146
4646465555656578789494
114
36363636363636383838414141454445454550504848
363636353542424545505065
16161616181818181818212121252525252525272727
161616212125252727303037
19181919191819191819222022242224262430343434
191919222222222525282824
M 8M 8M 8M 8M 10M 10M 10M 10M 10M 10M 10M 10M 10M 12M 12M 12M 12M 12M 12M 16M 16M 16
M 8M 8M 8M 10M 10M 12M 12M 14M 14M 16M 16M 20
0.25
0.280.250.39
0.390.46
0.460.66
0.661.05
1.051.19
1.402.152.402.85
0.260.290.260.500.500.760.761.201.201.651.652.45
5/16
-
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/16
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
5/8
5/8
3/4
Order Code: ST 44.3 1.4404
-flange with metric threads GFS-...SM GFx...SM
-flange with UNC threads GFS-...SU GFx... SU
*O.D. tube sizes 1/2”- 2”available in code 62 flanges
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G H I
metric unc
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)
2. 1.4404316L stainless
Order Code: ST 44.3 1.4404
-flange including metric bolts and o-ring DFS-...SM DFx...SMx
-flange including UNC bolts and o-ring DFS-...SU DFx...SUx
SAE-socket weld coupling
D3
3453453453453453453452762762072072071721383434
414414414414414414414414414414414414
1/2”1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”2”
21/2”3”
31/2”4”
1/2”1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”2”
21.617.520.327.225.334.030.342.838.348.650.561.073.290.5
103.0115.5
21.617.520.327.225.334.030.342.838.348.650.561.0
13131319192525323238385163738999
131313191925253232383851
38.1038.1038.1047.6347.6352.3752.3758.7258.7269.8569.8577.7788.90
106.38120.65130.18
40.4940.4940.4950.8050.8057.1557.1566.6866.6879.3879.3896.82
5454546565707079799393
102114134152162
545454717181819595
112112134
17.4817.4817.4822.2322.2326.1926.1930.1830.1835.7135.7142.8850.8061.9369.8577.77
18.2418.2418.2423.8023.8027.7627.7631.7531.7536.5036.5044.45
464646505055556868787890
105124136146
4646465555656578789494
114
727272727276768282909090
1001009696
727272707084849090
100100130
32323236363636424250505050545454
323232424250505454606074
M 8x30M 8x30M 8x30M 10x35M 10x35M 10x35M 10x35M 10x40M 10x40M 12x45M 12x45M 12x45M 12x45M 16x50M 16x50M 16x50
M 8x30M 8x30M 8x30M 10x35M 10x35M 12x45M 12x45M 14x45M 14x45M 16x50M 16x50M 20x65
19191919191919222224242630343434
191919222222222525282824
5/16 x 11/4
5/16 x 11/4
5/16 x 11/4
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
7/16 x 11/2
7/16 x 11/2
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 25/8 x 2
5/16 x 11/4
5/16 x 11/4
5/16 x 11/4
3/8 x 11/2
3/8 x 11/2
7/16 x 13/4
7/16 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 2
3/4 x 21/2
0.500.560.560.780.780.920.921.321.322.102.102.382.804.304.805.70
0.520.580.581.001.001.521.522.402.403.303.304.90
Code 613.000 P.S.I.DFS 080 SNBDFS 080 S-038DFS 080 S-A20DFS 100 SNBDFS 100 S-A25DFS 102 SNBDFS 102 S-A30DFS 104 SNBDFS 104 S-A38DFS 106 SNBDFS 106 S-A50DFS 108 SNBDFS 110 SNBDFS 112 SNBDFS 114 SNBDFS 116 SNBCode 626.000 P.S.I.DFS 401 S-012DFS 401 S-038DFS 401 S-A20DFS 402 SNBDFS 402 S-A25DFS 403 SNBDFS 403 S-A30DFS 404 SNBDFS 404 S-A38DFS 405 SNBDFS 405 S-A50DFS 406 SNB
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G I LTube
metric unc
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)ST 52.3 (FE 510)
2. 1.4404316L stainless
Order Code: ST 44.3/52.3 1.4404
-flange only AFC-...S AFCx-...S
-including metric bolts and o-ring AFC-...SM AFCx-...SMx
SAE-socket weld flange 500 P.S.I.
D4
4040404040404040404040
1/2”3/4”1”
11/4”11/2”2”
21/2”3”
31/2”4”5”
Code 613.000 P.S.I.AFC 080 SAFC 100 SAFC 102 SAFC 104 SAFC 106 SAFC 108 SAFC 110 SAFC 112 SAFC 114 SAFC 116 SAFC 118 S
22x228x235x242x248.3x3.2560.3x3.6573.2x3.6588.9x4.05101.6x4.5114.3x4.5139.7x4.85
152029344253648093
105126
22.528.535.542.549617790103116141
38.1047.6352.3758.7269.8577.7788.90
106.38120.65130.18152.40
5665707993
102114134152162190
17.4822.2326.1930.1835.7142.8850.8061.9369.8577.7792.08
465055687890
105124136146170
1012121215151520202528
34444445568
9111111.513.513.513.517.517.517.517.5
M 8x25M 10x30M 10x30M 10x30M 12x35M 12x35M 12x35M 16x40M 16x40M 16x45M 16x45
-----------
0.120.200.250.310.500.590.721.251.502.153.00
flanges australia
fafafa
D5
maximumrecommendedworkingpressurekg/cm2
weightkg.
dimensions
MA B C D E F G ITube
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)ST 52.3 (FE 510)
2. 1.4404316 L stainless
Order Code: ST 44.3/52.3 1.4404
-flange only GFC-...S GFC-x-...S
SAE-socket weld flange 500 P.S.I.-flat face
4040404040404040404040
1/2”3/4”1”
11/4”11/2”2”
21/2”3”
31/2”4”5”
Code 613.000 P.S.I.GFC 080 SGFC 100 SGFC 102 SGFC 104 SGFC 106 SGFC 108 SGFC 110 SGFC 112 SGFC 114 SGFC 116 SGFC 118 S
22x228x235x242x248.3x3.2560.3x3.6573.2x3.6588.9x4.05101.6x4.5114.3x4.5139.7x4.85
22.528.535.542.549617790103116141
152029344253648093
105126
38.1047.6352.3758.7269.8577.7788.90
106.38120.65130.18152.40
5665707993
102114134152162190
17.4822.2326.1930.1835.7142.8850.8061.9369.8577.7792.08
465055687890
105124136146170
1012121215151520202528
34444445568
M 8M 10M 10M 10M 12M 12M 12M 16M 16M 16M 16
0.120.200.250.310.500.590.721.251.502.153.00
flanges australia
fafafa
D6
maximumrecommendedworkingpressurekg/cm2
weightkg.
dimensions
MA B C D E F G ITube
nominalflangesize in
type
Material: 1. ST 44.3 (FE 430)ST 52.3 (FE 510)
2. 1.4404316 L stainless
Order Code: ST 44.3/52.3 1.4404
-flange including bolts and o-ring DFC-...SM DFCx-...SMX
SAE-socket weld flange 500 P.S.I.-coupling
4040404040404040404040
1/2”3/4”1”
11/4”11/2”2”
21/2”3”
31/2”4”5”
22x228x235x242x248.3x3.2560.3x3.6573.2x3.6588.9x4.05101.6x4.5114.3x4.5139.7x4.85
22.528.535.542.549617790103116141
152029344253648093
105126
38.1047.6352.3758.7269.8577.7788.90
106.38120.65130.18152.40
5665707993
102114134152162190
17.4822.2326.1930.1835.7142.8850.8061.9369.8577.7792.08
465055687890
105124136146170
34444445568
Code 613.000 P.S.I.DFC 080 SDFC 100 SDFC 102 SDFC 104 SDFC 106 SDFC 108 SDFC 110 SDFC 112 SDFC 114 SDFC 116 SDFC 118 S
M 8x25M 10x30M 10x30M 10x30M 12x35M 12x35M 12x35M 16x40M 16x40M 16x45M 16x45
0.240.400.500.621.001.181.442.503.004.306.00
2024242430303040405056
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E H I L S1 S2F1 F2
metric unc
nominalflangesize in
type
Order Code: ST 44.3/52.3 1.4404
-flange only AFS-.../90S AFx-.../90S
-flange including metric bolts and o-ring AFS-.../90SM AFx-.../90SMx
-flange including UNC bolts and o-ring AFS-.../90SU AFx-.../90SUx
SAE-socket weld flange 90˚
D7
345345345345276207207
414414414414414414414
1/2”1/2”3/4”1”11/4”11/2”2”
1/2”1/2”3/4”1”11/4”11/2”2”
Code 613.000 P.S.I.AFS 080/90 SNAFS 080/90 S-038AFS 100/90 SNAFS 102/90 SNAFS 104/90 SNAFS 106/90 SNAFS 108/90 SN
Code 626.000 P.S.I.AFS 401/90 S-012AFS 401/90 S-038AFS 402/90 SNAFS 403/90 SNAFS 404/90 SNAFS 405/90 SNAFS 406/90 SN
21.617.527.23442.848.661
21.617.527.23442.848.661
13131925323851
13131925323851
38.1038.1047.6352.3758.7269.8577.77
40.4940.4950.8057.1566.6879.3896.82
545465707993
110
5454707993
110134
17.4817.4822.2326.1930.1835.7142.88
18.2418.2423.8027.7631.7536.5044.50
606063708595
110
6060708595
110150
48485060687890
484860707894
106
16161819212525
16161921252576.5
10101012141618
10101214161818
99111111.513.513.5
99111315*17.521
20202428343842
20202834384260
37373843515665
37374351566592
M 8x30M 8x30M 10x35M 10x35M 10x40M 12x45M 12x45
M 8x30M 8x30M 10x35M 12x45M 14x50M 16x50M 20x110
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
7/16 x 11/2
1/2 x 13/4
5/8 x 2
5/16 x 11/4
5/16 x 11/4
3/8 x 11/2
7/16 x 13/4
1/2 x 13/4
5/8 x 2-
0.350.350.550.801.301.602.00
0.350.350.801.301.602.008.20
*13.5 for UNC Bolts
Material: 1. ST 44.3 (FE 430)ST 52.3 (FE 510)
2. 1.4404316 L stainless
SAE Butt Weld Flanges
Page No.
• SAE-weld on flange 1
• SAE-weld on flange - flat face 2
• SAE-weld on flange 3- metric pipes ND 40
• SAE-weld on flange 4- metric pipes ND 40 - flat face
• SAE-weld on flange - metric pipes (code 61) 5
• SAE-weld on flange - metric pipes (code 62) 6
• SAE-weld on flange - flat face 7
• SAE-butt weld insert - code 61 8
• SAE-butt weld insert - code 62 9
• SAE-butt weld coupling - 4 piece 10
• SAE-butt weld coupling - 2 piece 12
• SAE-butt weld flange 90˚ 13
• SAE-butt weld flange 90˚ 14for metric pipes - code 61
• SAE-butt weld flange 90˚ 15for metric pipes - code 62
• SAE-weld on flange adaptor 16for metric pipes - code 61
• SAE-weld on flange adaptor 17for metric pipes - code 62
flanges australia
fafafa
E
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G H L
metric unc
nominalflangesize in
type
Order Code: ST 44.3 1.4404
-flange only AFS-...ST AFx-...ST
-including metric bolts and o-ring AFS-...STM AFx-...STMx
-flange including UNC bolts and o-ring AFS-...STU AFx-... STUx
SAE-weld on flange
E1
Material: 1. ST 44.3 (FE 430)
2. 1.4404316L/321 stainless
3453453453452762072071721383434
414414414414414414414
1/2”1/2”3/4”1”
11/4”11/2”2”
21/2”3”
31/2”4”
1/2”1/2”3/4”1”
11/4”11/2”2”
Code 613.000 P.S.I.AFS 080 STAFS 080 ST-038AFS 100 STAFS 102 STAFS 104 STAFS 106 STAFS 108 STAFS 110 STAFS 112 STAFS 114 STAFS 116 ST
Code 626.000 P.S.I.AFS 401 ST-012AFS 401 ST-038AFS 402 STAFS 403 STAFS 404 STAFS 405 STAFS 406 ST
21.617.528.034.042.848.661.073.292.0
103.0115.5
21.517.528.034.042.848.661.0
1313192532385163738999
13131925323851
38.1038.1047.6352.3758.7269.8577.7788.90
106.38120.65130.18
40.4940.4950.8057.1566.6879.3896.82
545465707993
102114134152162
5454717993
112134
17.4817.4822.2326.1930.1835.7142.8850.8061.9369.8577.77
18.2418.2423.8027.7631.7536.5044.45
46465055687890
105124136146
464655687894
114
3636363841444550504848
36363541445565
1616181821252525272727
16162121253037
99111111.513.513.513.517.517.517.5
99111315*1721
M 8x30M 8x30M 10x35M 10x35M 10x40M 12x45M 12x45M 12x45M 16x50M 16x50M 16x50
M 8x30M 8x30M 10x35M 12x45M 14x45M 16x50M 20x65
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/
2
7/16 x 11/2
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 25/8 x 2
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
7/16 x 13/4
1/2 x 13/4
5/8 x 23/4 x 21/2
0.280.250.390.460.661.051.191.402.152.402.85
0.290.260.500.761.201.652.45
*13.5 for UNC Bolts
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G I
metric unc
nominalflangesize in
type
Order Code: ST 44.3 1.4404
-flange with metric threads GFS-...STM GFx-...STM
-flange with UNC threads GFS-...STU GFx-...STU
SAE weld on flange-flat face
E2
Material: 1. ST 44.3 (FE 430)
2. 1.4404316 L stainless
3453453453452762072071721383434
414414414414414414414
1/2”1/2”3/4”1”
11/4”11/2”2”
21/2”3”
31/2”4”
1/2”1/2”3/4”1”
11/4”11/2”2”
Code 613.000 P.S.I.GFS 080 ST GFS 080 ST-038 GFS 100 ST GFS 102 ST GFS 104 ST GFS 106 ST GFS 108 ST GFS 110 ST GFS 112 ST GFS 114 ST GFS 116 ST
Code 626.000 P.S.I.GFS 401 ST-012GFS 401 ST-038GFS 402 STGFS 403 STGFS 404 STGFS 405 STGFS 406 ST
21.517.528.034.042.848.661.073.292.0
103.0115.5
21.517.528.034.042.848.661.0
1313192532385163738999
13131925323851
38.1038.1047.6352.3758.7269.8577.7788.90
106.38120.65130.18
40.4940.4950.8057.1566.6879.3896.82
545465707993
102114134152162
5454717993
112134
17.4817.4822.2326.1930.1835.7142.8850.8061.9369.8577.77
18.2418.2423.8027.7631.7536.5044.45
46465055687890
105124136146
464655687894
114
3636363841444550504848
36363541445565
1616181821252525272727
16162121253037
M 8M 8M 10M 10M 10M 12M 12M 12M 16M 16M 16
M 8M 8M 10M 12M 14M 16M 20
5/165/163/83/87/161/21/21/25/85/85/8
5/165/163/87/161/25/83/4
0.250.280.390.460.661.051.191.402.152.402.85
0.260.290.500.761.201.652.45
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA C D E F G H LTube B1 B2
metric unc
nominalflangesize in
type
Order Code: ST 44.3 1.4404
-flange only AFS-... AFx-...
-flange including metric bolts and o-ring AFS-...M AFx...Mx
-flange including UNC bolts and o-ring AFS-...U AFx...Ux
SAE weld on flange-metric pipes ND 40
E3
Material: 1. ST 44.3 (FE 430)
2. 1.4404316 L stainless
404040404040404040403434343434
1/2”3/4”1”
11/4”11/2”2”2”
21/2”21/2”3”
31/2”31/2”4”4”5”
Code 613.000 P.S.IAFS 080 STRE 21.3AFS 100 STRE 26.9 AFS 102 STRE 33.7 AFS 104 STRE 42.4AFS 106 STRE 48.3AFS 108 STRE 48.3AFS 108 STRE 60.3AFS 110 STRE 60.3AFS 110 STRE 76.1AFS 112 STRE 88.9AFS 114 STRE 88.9AFS 114 STRE 76.1AFS 116 STRE 88.9AFS 116 STRE 114AFS 118 STRE 139 *1
21.3x2.626.9x2.633.7x3.242.4x3.248.3x3.248.3x3.260.3x3.660.3x3.676.1x3.688.9x3.688.9x3.673.2x3.688.9x3.6114.3x6139.7x4
22283543494961617790907790
115141
1621.52736424253537082827082107
13192531384249536274827082
102131
38.1047.6352.3758.7269.8577.7777.7788.9088.90
106.38120.65120.65130.18130.18152.40
5465707993
102102114114134152152162162190
17.4822.2326.1930.1835.7142.8842.8850.8050.8061.9369.8569.8577.7777.7792.10
46505568789090
105105124136136146146170
3536384144.545455050514848484828
1618182124.525252525262626262628
9111111.513.513.513.513.513.517.517.517.517.517.517.5
M 8x30M 10x35M 10x35M 10x40M 12x45M 12x45M 12x45M 12x45M 12x45M 16x50M 16x50M 16x50M 16x50M 16x50M 16x50
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
7/16 x 11/2
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 25/8 x 25/8 x 25/8 x 25/8 x 2
0.280.390.460.661.051.121.191.311.402.152.402.382.752.852.80
Please note: The maximum working pressure is fixed by SAE J 518 C on flange side or by the used tube.
*1 Construction of GFS 118 STRE 139 is Flat Flange with Socket Weld
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
dimensions
MA C D E F G HTube B1 B2
nominalflangesize in
type
Order Code: ST 44.3 1.4404
-flange only GFS-... GFx-...
E4
SAE weld on flange-metric pipes ND 40 - flat face
Material: 1. ST 44.3 (FE 430)
2. 1.4404316 L stainless
404040404040404040403434343434
1/2”3/4”1”
11/4”11/2”2”2”
21/2”21/2”3”
31/2”31/2”4”4”5”
Code 613.000 P.S.I.GFS 080 STRE 21.3GFS 100 STRE 26.9GFS 102 STRE 33.7GFS 104 STRE 42.4GFS 106 STRE 48.3GFS 108 STRE 48.3GFS 108 STRE 60.3GFS 110 STRE 60.3GFS 110 STRE 76.1GFS 112 STRE 88.9GFS 114 STRE 88.9GFS 114 STRE 76.1GFS 116 STRE 88.9GFS 116 STRE 114GFS 118 STRE 139 *1
21.3x2.626.9x2.633.7x3.242.4x3.248.3x3.248.3x3.260.3x3.660.3x3.673.2x3.688.9x3.688.9x3.676.1x3.688.9x3.6114.3x3.6139.7x4
22283543494961617790907790
115141
1621.52736424253537082827082107
-
13192531384249536274827082
102131
38.1047.6352.3758.7269.8577.7777.7788.9088.90
106.38120.65120.65130.18130.18152.40
5465707993
102102114114134152152162162190
17.4822.2326.1930.1835.7142.8842.8850.8050.8061.9369.8569.8577.7777.7792.10
46505568789090105105124136136146146170
3535384144.545455050514848484828
1618182124.525252525262626262628
M 8M 10M 10M 10M 12M 12M 12M 12M 12M 16M 16M 16M 16M 16M 16
0.280.390.460.661.051.201.251.291.402.152.402.402.692.852.80
*1 Construction of GFS 118 STRE 139 is Flat Flange with Socket Weld
Please note: The maximum working pressure is fixed by SAE J 518 C on flange side or by the used tube.
flanges australia
fafafa
Material: 1. ST 44.3 (FE 430)
2. 1.4404316 L stainless
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA C D E F G H LTube B1 B2
metric unc
nominalflangesize in
type
Order Code: ST 44.3 1.4404
-flange only AFS-... AFx-...
-flange including metric bolts and o-ring AFS-...M AFx-...Mx
-flange including UNC bolts and o-ring AFS-...U AFx-...Ux
E5
SAE weld on flange-metric pipes
250160250160250160250160210160160160160140
1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”11/2”2”
21/2”3”
Code 613.000 P.S.I.AFS 080 SRE 20AFS 080 SRE 22AFS 100 SRE 25AFS 100 SRE 28AFS 102 SRE 30AFS 102 SRE 35AFS 104 SRE 38AFS 104 SRE 42AFS 106 SRE 38AFS 106 SRE 42AFS 106 SRE 48AFS 108 SRE 60AFS 110 SRE 76AFS 112 SRE 76
20x322x325x328x330x435x338x442x338x442x348.3x4.560.3x5.676.1x7.176.1x7.1
2022252830353843384249617777
14161921.522273036303638496262
1413191922253031303638496262
38.1038.1047.6347.6352.3752.3758.7258.7269.8569.8569.8577.7788.90
106.38
5454656570707979939393
102114134
17.4817.4822.2322.2326.1926.1930.1830.1835.7135.7135.7142.8850.8061.93
464650505555686878787890
105124
353536363838414144.544.544.5455051
161618181818212124.524.524.5252526
991111111111.511.513.513.513.513.513.517.5
M 8x30M 8x30M 10x35M 10x35M 10x35M 10x35M 10x40M 10x40M 12x45M 12x45M 12x45M 12x45M 12x45M 16x50
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
7/16 x 11/2
7/16 x 11/2
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 2
0.280.280.390.390.460.470.660.661.051.051.051.201.402.15
Please note: The maximum working pressure is fixed by SAE J 518 C on flange side or by the used tube.
flanges australia
fafafa
E6
Material: 1. ST 44.3 (FE 430)
2. 1.4404316 L stainless
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA C D E F G H LTube B1 B2
metric unc
nominalflangesize in
type
Order Code: ST 44.3 1.4404
-flange only AFS-... AFx-...
-flange including metric bolts and o-ring AFS-...M AFx...Mx
-flange including UNC bolts and o-ring AFS-...U AFx...Ux
SAE weld on flange-metric pipes
Please note: The maximum working pressure is fixed by SAE J 518 C on flange side or by the used tube.
315315315315315315315315315315315315
1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”11/2”2”2”
Code 626.000 P.S.I.AFS 401 SRE 20AFS 402 SRE 20AFS 402 SRE 25AFS 403 SRE 25AFS 403 SRE 30AFS 404 SRE 30AFS 404 SRE 38AFS 405 SRE 38AFS 405 SRE 48AFS 405 SRE 60AFS 406 SRE 60AFS 406 SRE 76
20x320x325x425x430x430x438x638x648.3x860.3x1060.3x1076.1x12.5
202025253030383849616176
141417172222262632404048
141417172222262632404048
40.4950.8050.8057.1557.1566.6866.6879.3879.3879.3896.8296.82
54717181819595
112112112134134
18.2423.8023.8027.7627.7631.7531.7536.5036.5036.5044.4544.45
46555565657878949494
114114
343535424244445656566580
162121252525252828283333
91111131315 *115 *11717172121
M 8x30M 10x35M 10x35M 12x45M 12x45M 14x45M 14x45M 16x50M 16x50M 16x50M 20x60M 20x60
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
7/16 x 11/2
7/16 x 11/2
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 25/8 x 23/
4 x 21/2
3/4 x 21/
2
0.290.500.530.760.801.201.291.521.571.652.452.96
*1 13.5 for UNC Bolts
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
dimensions
MA C D E F G HTube B1 B2
nominalflangesize in
type
Order Code: ST 44.3 1.4404
-flange only GFS-... GFx-...
SAE weld on flange- metric pipes - Flat Face
E7
Material: 1. ST 44.3 (FE 430)
2. 1.4404316 L stainless
250160250160250160250160210160160160160140
315315315315315315315315315315315315
1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”11/2”2”
21/2”3”
1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”11/2”2”2”
Code 613.000 P.S.I.GFS 080 SRE 20GFS 080 SRE 22GFS 100 SRE 25GFS 100 SRE 28GFS 102 SRE 30GFS 102 SRE 35GFS 104 SRE 38GFS 104 SRE 42GFS 106 SRE 38GFS 106 SRE 42GFS 106 SRE 48GFS 108 SRE 60GFS 110 SRE 76GFS 112 SRE 76Code 626.000 P.S.I.GFS 401 SRE 20GFS 402 SRE 20GFS 402 SRE 25GFS 403 SRE 25GFS 403 SRE 30GFS 404 SRE 30GFS 404 SRE 38GFS 405 SRE 38GFS 405 SRE 48GFS 405 SRE 60GFS 406 SRE 60GFS 406 SRE 76
20x322x325x328x330x435x338x442x338x442x348.3x4.560.3x5.676.1x7.176.1x7.1
20x320x325x425x430x430x438x638x648.3x860.3x1060.3x1076.1x12.5
2022252830353843384249617777
202025253030383849616176
14161921.522273036303638496262
141417172222262632404048
1413191922253031303638496262
141417172222262632404048
38.1038.1047.6347.6352.3752.3758.7258.7269.8569.8569.8577.7788.90106.38
40.4950.8050.8057.1557.1566.6866.6879.3879.3879.3896.8296.82
5454656570707979939393
102114134
54717181819595
112112112134134
17.4817.4822.2322.2326.1926.1930.1830.1835.7135.7135.7142.8850.8061.93
18.2423.8023.8027.7627.7631.7531.7536.5036.5036.5044.4544.45
464650505555686878787890
105125
46555565657878949494
114114
353536363838414144.544.544.5455051
343535424244445656566580
161618181818212124.524.524.5252526
162121252525252828283333
M 8M 8M 10M 10M 10M 10M 10M 10M 12M 12M 12M 12M 12M 16
M 8M 10M 10M 12M 12M 14M 14M 16M 16M 16M 20M 20
0.280.280.390.390.460.470.660.661.051.051.051.201.402.15
0.290.500.530.760.801.201.291.521.571.652.452.96
Please note: The maximum working pressure is fixed by SAE J 518 C on flange side or by the used tube.
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G LTube
metric unc
nominalflangesize in
type
SAE- Butt Weld Insert
E8
Material: ST 52.3 (FE 510)
250250250250250250210210210250250250160210250160100210210402102101604016021040160210401383434
1/2”1/2”1/2”3/4”3/4”3/4”1”1”1”1”1”
11/4”11/4”11/4”11/4”11/2”11/2”11/2”11/2”11/2”11/2”11/2”2”2”2”2”
21/2”21/2”21/2”3”3”4”4”
Code 613.000 P.S.I.SFS 3001-16x2SFS 3001-4SFS 3001-8SFS 3002-25x3SFS 3002-4SFS 3002-8SFS 3003-28x3SFS 3003-30x4SFS 3003-4SFS 3003-8SFS 3003-38x5SFS 3004-38x5SFS 3004-4SFS 3004-8SFS 3004-16SFS 3005-38x4SFS 3005-42x3SFS 3005-42x5SFS 3005-45x5SFS 3005-4SFS 3005-8SFS 3005-16SFS 3006-55x5SFS 3006-4SFS 3006-8SFS 3006-16SFS 3007-4SFS 3007-8SFS 3007-16SFS 3008-4SFS 3008-8SFS 3010-4SFS 3010-8
16x221.3x2.921.7x3.825x326.9x3.626.9x3.928x330x433.7x3.633.7x4.538x538x542.4x3.642.4x4.542.4x6.338x442x342x545x548.3x3.648.3x5.048.3x7.155x560.3x3.960.3x560.3x873x573x773x9.588.9x5.588.9x7114.3x6.02114.3x8.8
162222272727283034343838434343384242454949495560.360.360.37373739090115115
1215.51418.919.718.9222226.524.728283533.429.7303632354138344552.55044635954787310296.7
38.1038.1038.1047.6347.6347.6352.3752.3752.3752.3752.3758.7258.7258.7258.7269.8569.8569.8569.8569.8569.8569.8577.7777.7777.7777.7788.9088.9088.90
106.38106.38130.18130.18
54545465656570707070707979797994949494949494102102102102114114114135135162162
17.4817.4817.4822.2322.2322.2326.1926.1926.1926.1926.1930.1830.1830.1830.1835.7135.7135.7135.7135.7135.7135.7142.8842.8842.8842.8850.8050.8050.8061.9361.9377.7777.77
45.645.645.651.851.851.858.458.458.458.458.472.672.672.672.682.282.282.282.282.282.282.296.496.496.496.4108.20108.20108.20130.60130.60152152
414141505050505050505055555555575757575757575757575758585860606060
8.58.58.510.510.510.510.510.510.510.510.5
*1*1*1*1
13.513.513.513.513.513.513.513.513.513.513.513.513.513.516.7516.751717
M 8x30M 8x30M 8x30M 10x30M 10x30M 10x30M 10x35M 10x35M 10x35M 10x35M 10x35
*2*2*2*2
M 12x35M 12x35M 12x35M 12x35M 12x35M 12x35M 12x35M 12x35M 12x35M 12x35M 12x35M 12x40M 12x40M 12x40M 16x45M 16x45M 16x50M 16x50
5/16 x 11/4
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
4
3/8 x 11/4
3/8 x 11/4
3/8 x 11/4
3/8 x 11/4
3/8 x 11/4
3/8 x 11/4
3/8 x 11/4
7/16 x 11/2
7/16 x 11/2
7/16 x 11/2
7/16 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 25/8 x 25/8 x 2
0.080.080.080.160.160.160.230.230.230.230.230.300.300.300.300.400.400.400.400.400.400.400.500.520.500.520.800.800.801.081.101.751.75
flanges australia
fafafa
Order Code:
-flange head only SFS-...
-including split flanges (or complete Flange) metric bolts and o-ring SFS-...M
-including split flanges (or complete Flange) UNC bolts and o-ring SFS-...U
Order Code for flange head as counterflange (without o-ring groove)
-flange head only G-SFS-...
E9
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G LTube
metric unc
nominalflangesize in
type
Material: ST 52.3 (FE 510)
250414250315315250315315414315315315315414250414315315
1/2”1/2”3/4”3/4”3/4”1”1”1”1”1”
11/4”11/4”11/4”11/4”11/2”11/2”2”2”
21/2”3”
Code 626.000 P.S.I.SFS 6001-16x2SFS 6001-8SFS 6002-25x3SFS 6002-25x3.5SFS 6002-8SFS 6003-30x3.5SFS 6003-30x4SFS 6003-8SFS 6003-16SFS 6003-38x5SFS 6004-30x4SFS 6004-38x5SFS 6004-8SFS 6004-16SFS 6005-8SFS 6005-16SFS 6006-8SFS 6006-16SFS 6007-16SFS 6008-16
16x221.3x4.525x325x3.526.9x5.630x3.530x433.7x4.633.7x6.538x530x438x542.4x4.942.4x6.348.3x548.3x7.1560.3x5.560.3x8.75max.89max.114.3
1621.3252526.93030343438303841.442.4505060.360.3*5*5
1211.9191815.72322252128222832.529.838344549*5*5
40.4940.4950.8050.8050.8057.1557.1557.1557.1557.1566.6866.6866.6866.6879.3879.3896.8296.82
123.80152.40
5656717171818181818195959595
113113133133180215
18.2418.2423.8023.8023.8027.7627.7627.7627.7627.7631.7531.7531.7531.7536.5036.5044.5044.5058.4071.60
47.247.260606069.669.669.669.669.677.277.277.277.29595113.8113.8150.20198.20
4545505050555555555560606060656575757580
8.58.510.510.510.5*3*3*3*3*3*4*4*4*416.7516.7521212631
M 8x30M 8x30M 10x35M 10x35M 10x35M 12x45M 12x45M 12x45M 12x45M 12x45M 14x50M 14x50M 14x50M 14x50M 16x55M 16x55M 20x65M 20x65M 24x75M 30x90
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
3/8 x 11/2
7/16 x 13/4
7/16 x 13/4
7/16 x 13/4
7/16 x 13/4
7/16 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 2
3/4 x 21/
2
3/4 x 21/
2
--
0.080.080.150.170.170.230.250.230.250.250.300.310.300.310.530.500.800.91
--
Please note: The maximum working pressure is fixed by SAE J 518 C on flange side or by the used tube.
-4 = Schedule 40 Pipe-8 = Schedule 80 Pipe-16 = Schedule 160 Pipe
*1 Diameter 10.5, 12.5 or 12.0*2 Bolts M10x30 or M12x40*3 Diameter 12.0 or 12.5*4 Diameter 12.0 or 12.5*5 Specify Pipe OD and Wall
SAE- Butt Weld Insert (Cont.)
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G LTube
metric unc
nominalflangesize in
type
SAE Butt Weld - coupling 4 piece
E10
25025025025025025021021021025025025016021025016010021021040210210160401602101601604013834343434343434
1/2”1/2”1/2”3/4”3/4”3/4”1”1”1”1”1”
11/4”11/4”11/4”11/4”11/2”11/2”11/2”11/2”11/2”11/2”11/2”2”2”2”2”
21/2”21/2”3”3”
31/2”31/2”4”4”4”5”5”
Code 613.000 P.S.I.DSFS 3001-16x2DSFS 3001-4DSFS 3001-8DSFS 3002-25x3DSFS 3002-4DSFS 3002-8DSFS 3003-28x3DSFS 3003-30x4DSFS 3003-4DSFS 3003-8DSFS 3003-38x5DSFS 3004-38x5DSFS 3004-4DSFS 3004-8DSFS 3004-16DSFS 3005-38x4DSFS 3005-42x3DSFS 3005-42x5DSFS 3005-45x5DSFS 3005-4DSFS 3005-8DSFS 3005-16DSFS 3006-55x5DSFS 3006-4DSFS 3006-8DSFS 3006-16DSFS 3007-4DSFS 3007-8DSFS 3008-4DSFS 3008-8DSFS 3009-88.9x8DSFS 3009-100x6DSFS 3010-110x6DSFS 3010-4DSFS 3010-8DSFS 3011-133x6.5DSFS 3011-139.7x10
16x221.3x2.921.7x3.825x326.9x3.626.9x3.928x330x433.7x3.633.7x4.538x538x542.4x3.642.4x4.542.4x6.338x442x342x545x548.3x3.648.3x5.048.3x7.155x560.3x3.960.3x560.3x873.2x5.573.2x7.188.9x5.588.9x788.9x8100x6110x6114.3x6.02114.3x8.8133x6.5139.7x10
1622222727272830343438384343433842424549494955
60.360.360.3
7474909090
100110115115133140
1215.51418.919.718.9222226.524.728283533.429.7303632354138344552.550446562817373889810296.7120120
38.1038.1038.1047.6347.6347.6352.3752.3752.3752.3752.3758.7258.7258.7258.7269.8569.8569.8569.8569.8569.8569.8577.7777.7777.7777.7788.9088.90
106.38106.38120.65120.65130.18130.18130.18152.40152.40
54545465656570707070707979797994949494949494
102102102102114114135135152152162162162184184
17.4817.4817.4822.2322.2322.2326.1926.1926.1926.1926.1930.1830.1830.1830.1835.7135.7135.7135.7135.7135.7135.7142.8842.8842.8842.8850.8050.8061.9361.9369.8569.8577.7777.7777.7792.0892.08
45.645.645.651.851.851.858.458.458.458.458.472.672.672.672.682.282.282.282.282.282.282.296.496.496.496.4108.20108.20130.60130.60139139152152152180180
828282100100100100100100100100110110110110114114114114114114114114114114114116116120120120120120120120120120
8.58.58.510.510.510.510.510.510.510.510.5*1*1*1*113.513.513.513.513.513.513.513.513.513.513.513.513.516.7516.7517171717171717
M 8x30M 8x30M 8x30M 10x30M 10x30M 10x30M 10x35M 10x35M 10x35M 10x35M 10x35*2*2*2*2M 12x35M 12x35M 12x35M 12x35M 12x35M 12x35M 12x35M 12x35M 12x35M 12x35M 12x35M 12x40M 12x40M 16x45M 16x45M 16x45M 16x45M 16x50M 16x50M 16x50M 16x50M 16x50
5/16 x 11/4
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
4
3/8 x 11/4
3/8 x 11/4
3/8 x 11/4
3/8 x 11/4
3/8 x 11/4
3/8 x 11/4
3/8 x 11/4
7/16 x 11/2
7/16 x 11/2
7/16 x 11/2
7/16 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 11/2
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 25/8 x 25/8 x 25/8 x 25/8 x 25/8 x 25/8 x 25/8 x 2
0.080.080.080.160.160.160.230.230.230.230.230.300.300.300.300.400.400.400.400.400.400.400.500.520.500.520.800.801.081.101.351.401.751.751.752.622.62
Material: 1. ST 52.3 (FE 510)
flanges australia
fafafa
Order Code:
-coupling only D-SFS-...
E11
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E F G LTube
metric unc
nominalflangesize in
type
Material: 1. ST 52.3 (FE 510)
250414250315315250315315414315315315315414250414414315315315414350
1/2”1/2”3/4”3/4”3/4”1”1”1”1”1”
11/4”11/4”11/4”11/4”11/2”11/2”11/2”2”2”2”2”2”
21/2”3”
Code 626.000 P.S.I.DSFS 6001-16x2DSFS 6001-8DSFS 6002-25x3DSFS 6002-25x3.5DSFS 6002-8DSFS 6003-30x3.5DSFS 6003-30x4DSFS 6003-8DSFS 6003-16DSFS 6003-38x5DSFS 6004-30x4DSFS 6004-38x5DSFS 6004-8DSFS 6004-16DSFS 6005-8DSFS 6005-16DSFS 6005-48.3x8.8DSFS 6006-8DSFS 6006-16DSFS 6006-60.3x10DSFS 6006-60.3x13.4DSFS 6006-65x8DSFS 6007-*5DSFS 6008-*5
16x221.3x4.525x325x3.526.9x5.630x3.530x433.7x4.633.7x6.538x530x438x542.4x4.942.4x6.348.3x548.3x7.1548.3x8.860.3x5.560.3x8.7560.3x1060.3x13.465x8max. 89max. 114.3
1621.3252526.9303034343830383842.450505060.360.360.360.365*5*5
1211.9191815.7232220.9192822282729.8383430.745434033.749*5*5
40.4940.4950.8050.8050.8057.1557.1557.1557.1557.1566.6866.6866.6866.6879.3879.3879.3896.8296.8296.8296.8296.82
123.80152.40
5656717171818181818195959595
113113113133133133133133180215
18.2418.2423.8023.8023.8027.7627.7627.7627.7627.7631.7531.7531.7531.7536.5036.5036.5044.4544.4544.4544.4544.4558.4071.60
47.247.260606069.669.669.669.669.677.277.277.277.2959595113.8113.8113.8113.8113.8150.20198.20
9090
100100100110110110110110120120120120130130130150150150150150150160
8.58.510.510.510.5*3*3*3*3*3*4*4*4*416.7516.7516.7521212121212631
M 8x30M 8x30M 10x35M 10x35M 10x35M 12x45M 12x45M 12x45M 12x45M 12x45M 14x50M 14x50M 14x50M 14x50M 16x55M 16x55M 16x55M 20x65M 20x65M 20x65M 20x65M 20x65M 24x75M 30x90
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
3/8 x 11/2
7/16 x 13/4
7/16 x 13/4
7/16 x 13/4
7/16 x 13/4
7/16 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 25/8 x 2
3/4 x 21/
2
3/4 x 21/
2
3/4 x 21/
2
3/4 x 21/
2
3/4 x 21/
2
--
0.080.080.150.171.070.230.250.230.250.250.300.310.300.310.530.500.530.800.910.800.910.91--
*1 Diameter 10.5, 12.5 or 12.0*2 Bolts M10x30 or M12x40*3 Diameter 12.0 or 12.5*4 Diameter 14.5 or 13.5*5 Specify Pipe OD and Wall
-4 schedule 40 pipe-8 schedule 80 pipe-16 schedule 160 pipe
SAE Butt Weld - coupling 4 piece (Cont.)
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA CB D E F G H
metric unc
nominalflangesize in
type
Order Code: ST 44.3 1.4404
-flange including metric bolts and o-ring DFS-...STM DFx-...STMx
-flange including UNC bolts and o-ring DFS-...STU DFx... STUx
SAE-butt weld coupling - 2 piece
E12
Material: 1. ST 44.3 (FE 430)
2. 1.4404316 L stainless
3453453453452762072071721383434
414414414414414414414
1/2”1/2”3/4”1”
11/4”11/2”2”
21/2”3”
31/2”4”
1/2”1/2”3/4”1”
11/4”11/2”2”
Code 613.000 P.S.I.DFS 080 STDFS 080 ST-038DFS 100 STDFS 102 STDFS 104 STDFS 106 STDFS 108 STDFS 110 STDFS 112 STDFS 114 STDFS 116 ST
Code 626.000 P.S.I.DFS 401 ST-012DFS 401 ST-038DFS 402 STDFS 403 STDFS 404 STDFS 405 STDFS 406 ST
21.517.528.034.042.848.661.077.092.0103.0115.5
21.517.528.034.042.848.661.0
1313192532385163738999
13131925323851
38.1038.1047.6352.3758.7269.8577.7788.90106.38120.65130.18
40.4940.4950.8057.1566.6879.3896.82
545465707993102114134152162
5454717995114134
17.4817.4822.2326.1930.1835.7142.8850.8061.9369.8577.77
18.2418.2423.8027.7631.7536.5044.45
46465055687890
105124136146
464655687894
114
72727276828890
1001009696
7272708288
110130
3232363642505050545454
32324242486074
M 8x30M 8x30M 10x35M 10x35M 10x40M 12x45M 12x45M 12x45M 16x50M 16x50M 16x50
M 8x30M 8x30M 10x35M 12x45M 14x45M 16x50M 20x65
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
7/16 x 11/2
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 25/8 x 2
5/16 x 11/4
5/16 x 11/4
3/8 x 11/2
7/16 x 13/4
1/2 x 13/4
5/8 x 23/4 x 21/2
0.560.500.780.921.322.102.382.804.304.805.70
0.580.521.001.522.403.304.90
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA B C D E H L S1F1 F2 S2
metric unc
nominalflangesize in
type
Order Code: ST 44.3/52.3
-flange only AFS-.../90ST
-flange including metric bolts and o-ring AFS-.../90STM
SAE-butt weld flange 90˚
E13
Material: 1. ST 44.3 (FE 430)ST 52.3 (FE 510)
345345276207207
414414414414414
3/4”1”
11/4”11/2”2”
3/4”1”
11/4”11/2”2”
Code 613.000 P.S.I.AFS 200/90 STAFS 202/90 STAFS 204/90 STAFS 206/90 STAFS 208/90 ST
Code 626.000 P.S.I.AFS 700/90 STAFS 702/90 STAFS 704/90 STAFS 706/90 STAFS 708/90 ST
27.034.543.050.065.0
2834424865
1923313548
1925323847
47.6352.3758.7269.8577.77
50.8057.1566.6879.3896.82
70758697
100
718195
113134
22.2326.1930.1835.7142.88
23.8027.7631.7536.5044.50
6372829299
708295
115150
5060687890
60707894
106
2124252950
1924273076.5
111111.51414
1113151721
23252731.537.5
2227324060
4148545763
4047566892
M 10x40M 10x45M 10x45M 12x50M 12x70
M 10x35M 10x45M 14x50M 16x50M 20x110
-----
-----
0.650.851.151.702.15
0.500.801.152.008.20
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MATube C D E H LS1 S2F1 F2B1 B2
metric unc
nominalflangesize in
type
Order Code: ST 44.3/52.3 1.4404
-flange only AFs-... AFx-...
-flange including metric bolts and o-ring AFs-...M AFx...Mx
-flange including UNC bolts and o-ring AFs-...M AFx...Ux
SAE-butt weld flange 90˚for metric pipes
E14
Material: 1. ST 44.3 (FE 430)ST 52.3 (FE 510)
2. 1.4404316 L stainless
250160250160250160250160250160250160250160160210160160160160
1/2”1/2”1/2”1/2”3/4”3/4”3/4”3/4”1”1”1”1”
11/4”11/4”11/4”11/2”11/2”11/2”2”2”
Code 613.000 P.S.I.AFS 080/90 SRE 20AFS 080/90 SRE 22AFS 080/90 SRE 25AFS 080/90 SRE 28AFS 100/90 SRE 25AFS 100/90 SRE 28AFS 100/90 SRE 30AFS 100/90 SRE 35AFS 102/90 SRE 30AFS 102/90 SRE 35AFS 102/90 SRE 38AFS 102/90 SRE 42AFS 104/90 SRE 38AFS 104/90 SRE 42AFS 104/90 SRE 48.3AFS 106/90 SRE 38AFS 106/90 SRE 42AFS 106/90 SRE 48.3AFS 108/90 SRE 60.3AFS 108/90 SRE 76.1
20 x 322 x 225 x 328 x 325 x 328 x 330 x 435 x 430 x 435 x 438 x 442 x 338 x 442 x 348.3 x 4.538 x 442 x 348.3 x 4.560.3 x 5.676.1 x 7.1
2022252825283035303538423842493842496177
1418192219222227222730363036393036395151
1313131319191919252525253232323838384545
38.1038.1038.1038.1047.6347.6347.6347.6352.3752.3752.3752.3758.7258.7258.7269.8569.8569.8577.7777.77
545454546565656570707070797979939393
110110
17.4817.4817.4817.4822.2322.2322.2322.2326.1926.1926.1926.1930.1830.1830.1835.7135.7135.7142.8842.88
606060606363636370707070858585959595
110110
4848484850505050606060606868687878789090
1616161618181818191919192121212525252525
2020202024242424282828283434343838384242
3737373738383838434343435151515555556565
9999111111111111111111.511.511.513.513.513.513.513.5
M 8x30M 8x30M 8x30M 8x30M 10x35M 10x35M 10x35M 10x35M 10x35M 10x35M 10x35M 10x35M 10x40M 10x40M 10x40M 12x45M 12x45M 12x45M 12x45M 12x45
5/16 x 11/4
5/16 x 11/4
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
7/16 x 11/2
7/16 x 11/2
7/16 x 11/2
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
0.330.340.350.360.490.500.510.550.700.730.760.801.201.241.301.501.531.601.932.00
flanges australia
fafafa
E15
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MATube C D E H LS1 S2F1 F2B1 B2
metric unc
nominalflangesize in
type
Order Code: ST 44.3/52.3 1.4404
-flange only AFs-... AFx-...
-flange including metric bolts and o-ring AFs-...M AFx-...Mx
-flange including UNC bolts and o-ring AFs-...U AFx-...Ux
SAE-butt weld flange 90˚for metric pipes
Material: 1. ST 44.3 (FE 430)ST 52.3 (FE 510)
2. 1.4404316 L stainless
315315315315315315315315315315315315315
1/2”1/2”3/4”3/4”1”1”
11/4”11/4”11/2”11/2”11/2”2”2”
Code 626.000 P.S.I.AFS 401/90 SRE 20AFS 401/90 SRE 25AFS 402/90 SRE 25AFS 402/90 SRE 30AFS 403/90 SRE 30AFS 403/90 SRE 38AFS 404/90 SRE 38AFS 404/90 SRE 48.3AFS 405/90 SRE 38AFS 405/90 SRE 48.3AFS 405/90 SRE 60.3AFS 406/90 SRE 60.3AFS 406/90 SRE 76.1
20x325x425x430x430x438x538x5
48.3x838x5
48.3x860.3x1060.3x10
76.1x12.5
20252530303838493849616174
14171722222828322832404050
13131919252532323838385151
40.4940.4950.8050.8057.1557.1566.6866.6879.3879.3879.3896.8296.82
56.456.471.371.3818195.295.2112.8112.8112.8134134
18.2418.2423.8023.8027.7627.7631.7531.7536.5036.5036.5044.5044.50
6060707085859595
110110110150150
4848606070707878949494
106106
161619192121252525252576.576.5
20202828343438384242426060
37374343515156566565659292
991111131314.5*114.5*117.517.517.52121
M 8x30M 8x30M 10x35M 10x35M 12x45M 12x45M 14x45M 14x45M 16x50M 16x50M 16x50M 20x110M 20x110
5/16 x11/4
5/16 x11/4
3/8 x11/
2
3/8 x11/2
7/16 x13/4
7/16 x13/4
1/2 x13/4
1/2 x13/4
5/8 x25/8 x25/8 x2
--
0.350.360.740.801.251.301.521.601.841.922.008.208.20
*1 13.5 for Bolt
flanges australia
fafafa
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA C ED LS1F1 F2 S2B1 B2
metric unc
nominalflangesize in
type
Order Code: ST 52.3 1.4571
-90˚ elbow only WFS-... WFSx-...
-including splitflanges, metric bolts and o-ring WFS-...M WFSx-...Mx
-including splitflanges, UNC bolts and o-ring WFS-...U WFSx-... Ux
SAE-weld on flange adaptor-for metric pipes
E16
Material: 1. ST 52.3 (FE 510)
2. 1.4571316T stainless
250345160345160250250100210250210100210210160
1/2”1/2”3/4”3/4”3/4”3/4”1”1”1”
11/4”11/4”11/4”11/4”11/2”11/2”
Code 613.000 P.S.I.WFS 3001-15WFS 3001-16WFS 3002-18WFS 3002-20WFS 3002-22WFS 3002-25WFS 3003-25WFS 3003-28WFS 3003-30WFS 3004-25WFS 3004-30WFS 3004-35WFS 3004-38WFS 3005-38WFS 3005-42
151618202225252830253035383842
111015141817192421192231283036
111019171917212521272732273236
38.1038.1047.6347.6347.6347.6352.3752.3752.3758.7258.7258.7258.7269.8569.85
545464.964.964.964.969.969.969.979.479.479.479.493.893.8
17.4817.4822.2322.2322.2322.2326.1926.1926.1930.1830.1830.1830.1835.7135.71
60.860.870.970.970.970.979.279.279.285.385.385.385.3
117.1117.1
45.645.651.851.851.851.858.458.458.472.672.672.672.682.282.2
393942424242454545505050507676
383845454545505050595959597676
8.58.510.510.510.510.510.510.510.5
*1*1*1*1
13.513.5
M 8x30M 8x30M 10x35M 10x35M 10x35M 10x35M 10x35M 10x35M 10x35
*2*2*2*2
M 12x40M 12x40
5/16 x 11/4
5/16 x 11/4
3/8 x 11/
2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
7/16 x 11/2
7/16 x 11/2
7/16 x 11/2
7/16 x 11/2
1/2 x 11/2
1/2 x 11/2
0.360.370.570.580.590.640.770.790.841.131.171.181.371.952.04
*1 Hole diameter 10.5, 12.5, 12.0*2 Bolt size 10x30 or 12x40
Please note: The maximum working pressure is fixed by SAE J 518 C on flange side or by the used tube.
flanges australia
fafafa
E17
maximumrecommendedworkingpressurekg/cm2
weightkg.
boltsdimensions
MA C ED LS1F1 F2 S2B1 B2
metric unc
nominalflangesize in
type
Order Code: ST 52.3 1.4571
-90˚ elbow only WFS-... WFSx-...
-including splitflanges, metric bolts and o-ring WFS-...M WFSx-...Mx
-including splitflanges, UNC bolts and o-ring WFS-...U WFSx-... Ux
SAE-weld on flange adaptor-for metric pipes
Material: 1. ST 52.3 (FE 510)
2. 1.4571316T stainless
*3 Hole diameter 12.0 or 12.5*4 Hole diameter 13.5 or 14.5
400400400400400315400315400315400315400
1/2”3/4”3/4”3/4”1”1”1”
11/4”11/4”11/4”11/4”11/2”11/2”
Code 626.000 P.S.I.WFS-6001-16WFS-6002-16WFS-6002-20WFS-6002-25WFS-6003-25WFS-6003-30WFS-6003-30-400WFS-6004-30WFS-6004-30-400WFS-6004-38WFS-6004-38-400WFS-6005-38WFS-6005-38-400
16162025253030303038383838
10101215152218221828222822
10171717202520272430243226
40.4950.8050.8050.8057.1557.1557.1566.6866.6866.6866.6879.3879.38
5671717181818195959595
113113
18.2423.8023.8023.8027.7627.7627.7631.7531.7531.7531.7536.5036.50
61.6787878949494106.6106.6106.6106.6123.5123.5
47.260606069.669.669.677.277.277.277.29595
39484848606060686868687676
38484848606060686868687676
8.510.510.510.5
*3*3*3*4*4*4*4
16.516.5
M 8x35M 10x35M 10x35M 10x35M 12x45M 12x45M 12x45M 14x50M 14x50M 14x50M 14x50M 16x55M 16x55
5/16 x 11/4
3/8 x 11/2
3/8 x 11/2
3/8 x 11/2
7/16 x 13/4
7/16 x 13/4
7/16 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
1/2 x 13/4
5/8 x 25/8 x 2
0.480.830.870.961.351.401.532.102.212.362.453.253.38
Please note: The maximum working pressure is fixed by SAE J 518 C on flange side or by the used tube.