[email protected] +44 (0)1493 738397 …[email protected] +44 (0)1493 738397 en-gen...
TRANSCRIPT
[email protected] +44 (0)1493 738397 www.engen-diesel.com
En-Gen Diesel Products are specialists in the procurement and supply of equipment and
spares to the Marine, Industrial, Power Generation and Oil and Gas markets.
Our passion and total commitment to offering
quality service and support along with the
emphasis on building strong customer relations
is key to the success of our business so we will
always do whatever is required to satisfy our
clients to meet their needs every single time.
Over 20 years working closely with major
clients in the industries we provide for, we
have developed a comprehensive supply chain
network that has enabled us to offer an extensive
product range with cost effective solutions.
Our aim is to offer you a single sourcing
procurement solution for all these products
no matter where they were manufactured.
We supply spares for Diesel & Gas Engine
applications along with Generator
spares covering most of the well known
global brands found in the market today.
We can supply genuine replacement
parts along with a quality aftermarket
option depending on your requirements.
En-Gen offer complete Engine packages that
cover all sectors we operate in including Zone
II requirements for Oil and Gas applications.
Whether it be Marine Propulsion, Generator,
Fire Pump or maybe an Industrial Open
Power Unit then we will supply all the Engine
options available to you from brands such
as Caterpillar, Detroit Diesel, Volvo Penta,
Scania, Cummins and MTU to name a few.
We are here to assist you no matter what your
requirements are and we hope En-Gen Diesel
Products can assist your business in the future.
2
Welcome
3
En-Gen Diesel Products provide the Marine Industry with a one-stop sourcing
solution for all products found on board your vessels from Diesel Engines,
Generators, Compressors, Pumps, Filtration and Deck Equipment along with
Electrical Equipment, Valves and Instrumentation.
With our specialist knowledge and years of
experience at our disposal we are able to
provide technical support from single boat
owners to large fleet operators globally on a
24/7 basis.
Reducing downtime is critical in the Marine
industry and En-Gen Diesel Products provide a
rapid response, sourcing and shipping goods in
a timely manner.
For products manufactured all over the world
we have global freight forwarding partners that
enable us to expedite equipment to whatever
part of the world the vessel is in port.
This will help minimise downtime and also
reduce freight costs by shipping direct.
Working closely with our partners, we are
able to offer extended services such as Engine
Repairs, Engine Rebuild, Hydraulic Repairs,
Precision Machining and Dyno Testing Facilities
for Engines up to 2000 BHP.
From replacement to repair we can offer a
comprehensive support package to assist you
night and day.
Marine
4 5
From our HQ in Great Yarmouth, UK, our single
sourcing solution policy means whatever our
clients require, En-Gen Diesel Products will
endeavour to provide support and a quick
solution to your problems.
Utilising our Global supply chain network
we are able to offer the most cost effective
solutions to our clients for products from most
of the best known brands found in the market
today.
Our client’s requests vary from one to another
hence En-Gen Diesel Products provide support
for every possible situation that arises.
This means we are able to supply OEM
replacement spares as well as aftermarket
options where available to satisfy all our client’s
requests.
En-Gen Diesel Products support the Oil and Gas market utilising over 20 years of
knowledge within the Sales team dealing with global corporations at home and
abroad to bring first class procurement and support solutions to the table.
6
Oil & Gas
7
With the downturn in the Offshore industry,
operators are looking at ways they can reduce
maintenance costs without compromising
assets.
Dealing with OEM’s globally, we can provide
genuine equipment competitively for Engines,
Pumps, Generators, Filtration and all the spares
for additional equipment found in the Offshore
sector.
Our Zone II knowledge we bring to the industry
enables En-Gen Diesel Products to enhance
the expectations our clients can expect from us
and that we can fully support them.
We have a global network of freight forwarders
who help us to cut costs and improve delivery
schedules no matter where the spares have to
come from as we understand that downtime
in the Offshore sector has huge implications
We have products available that can make
a massive impact for Power Generation
maintenance savings and reliability.
In conjunction with these products, we are
making a positive impact on the environment
by reducing hazardous waste disposal
ultimately saving the operators from expensive
bills.
financially to the operator.
We work closely with well known third parties
to provide onshore repairs to Engines, Hydraulic
Equipment and Transmissions to compliment
our all round offering to the Offshore sector.
En-Gen Diesel Products can offer an extensive range of Generator sets covering
the Marine, Industrial and Oil and Gas markets.
Covering up to 2MW Generator sets En-Gen
Diesel Products can put a package together
to meet your requirements, with a variety of
cooling system options available depending on
application including Radiator, Heat Exchanger
or Keel Cooled.
All the Generator sets we provide are built using
only the highest quality components with
alternators from brands such as Leroy Somer,
Stamford, Meccalte.
The Control Panels vary from each Manufacturer
but well-known brands such as FG Wilson’s use
the Power Wizard.
Cummins Power Generation use the Power
Command as their primary control panel.
The Deep Sea Control Panel range is widely used
and has been fitted as standard by alternate
Manufacturers Globally.
Zone 2 Generator sets will require ATEX certified
components to be fitted to meet the current
legislation for safe operation in Hazardous
Areas.
For all your Generator requirements En-Gen
Diesel Products are your single sourcing
solution.
In conjunction with the Generators we supply,
we are able to provide cost saving filtration
packages to extend service intervals from
standard 500 hour intervals up to 1500 hours
plus.
Power Generation
8 9
We are able to offer products from premium
brands such as FG Wilson, Volvo Penta,
Cummins, Caterpillar, Marapco, Kubota, Kohler
and many more.
Depending on what your application and power
requirements are En-Gen Diesel Products will
be able to advise you of the best solutions each
and every time.
Whether you require Prime Power, Emergency
Standby or Marine Auxiliary we can look at
multiple options from the Manufacturers we
promote and supply to make sure you get a
correct fit for your requirement.
For most Standard Industrial Generator sets we
are normally able to supply from stock made
available to us.
For specialised Rig Safe and Zone II applications
these are normally built to order as these tend
to be designed as a bespoke set to match our
client’s requirements.
Where there is a requirement for CE marked
equipment En-Gen Diesel Products are able to
supply.
En-Gen Diesel Products have many years of experience within their sales team
supplying Diesel Engines to all the markets we represent globally.
Engine Sales
10 11
Whatever your application we will be able to
offer advice and support in helping you make
the correct decision based on facts.
Offering like for like replacements to re-power
options we can provide you a full range of
engines from the leading manufacturers in the
marketplace.
Marine Leisure, Marine Commercial, Industrial,
Power Generation, Construction and Offshore -
we can help you.
Offering the latest emission compliant
engines utilising the latest technology from
manufacturers such as Caterpillar, Volvo
Penta, Cummins, Scania, MAN where you can
guarantee a fuel efficient and reliable product.
En-Gen Diesel Products have many years of experience providing Diesel Engine Parts
and all related supplies to a global customer base.
12
Parts Sales
13
From Marine, Industrial, Power Generation or
Oil and Gas applications, we are able to source
Diesel Engine spares to cover a wide range of
manufacturers products such as Detroit Diesel,
MTU, Volvo Penta, Cummins, Caterpillar, John
Deere, Yanmar, Lister Petter, Perkins, Mercedes,
Deutz, MAN, Doosan and many more.
We are truly your one stop procurement solution
for anything engine or generator related.
As an independent business, we are able to offer
both genuine manufacturers parts and quality
aftermarket products to suit your budget.
Our supply chain network enables us to support you
no matter where you are located globally and we
worked very closely with global freight forwarders
to expedite in the most efficient way saving time
and money.
We support products such as Compressors,
Filtration Systems, Gearboxes, Air Starter Motors,
Electrical Equipment, Instrumentation, Pumps but
are not limited to and cover ATEX requirements for
Oil and Gas applications where required.
Before a diesel engine can be put into any hazardous area, they require significant
modifications.
Zone II Packages
14 15
Components that are required for the engine
to meet the regulations are exhaust gas cooler,
water cooled turbo, temperature sensors, air
inlet shutdown system, flame traps and spark
arrester silencer that are required on the engine
exhaust system air starter and alternator.
En-Gen Diesel Products can offer diesel driven
engine packages ranging from 52 BHP up to
2000 BHP utilising engines from multiple
engine manufacturers found in the industry
today.
All Zone II engine packages will meet Class I
Division 2 (NEC500), Class I Zone II (NEC505) -
ATEX Directive (94/9/EC) Zone II hazardous
locations with category 3G (Zone 2), gas group
IIA, T3 (200C) temperature class certification.
These engine packages can be found in a
wide range of equipment used onshore and
offshore such as Wireline units, Coil Tubing
Powerpacks, Generator Sets, Nitrogen Pumps
units, Compressors and Hydraulic Powerpacks.
We are here to assist you and will gladly advise
the best options available for the application.
En-Gen Diesel Products Limited
Unit 15 Faraday Road
Gapton Hall Industrial Estate
Great Yarmouth
Norfolk
NR31 0NF
+44 (0)1493 738397
www.engen-diesel.com