sample design - purely kitchen design
TRANSCRIPT
PurelyKITCHENDESIGN
Independent Kitchen Design by Sue Stenson
Finalised Design Pack for:
Sample
Sample Design
t| 07852 270455
www.purelykitchendesign.com
ITEM LIST (Position numbers correspond to Plan)
Use this list to get as many quotes as you wish. Suppliers should offer a good discount for not having to measure or design your room which is very time
consuming, be sure to ask for it! They want your business!
Please remember suppliers and manufacturers units will vary in height, depth and availability.
This kitchen was drawn with 100mm plinth, tall housings of 2015mm (not including plinth) base units of 780mm, 38mm laminate worktop. Overall finished
height of kitchen 918mm.
For this project the units are in a Gloss Magnolia foil door. Items marked in pink are in a Gloss Truffle Foil door
UNITS (measurements in mm’s)
Pos Hand Description Width Height Depth
1 Support side panel 16 2015 376
2 L Larder unit 1 door 1 fixed shelf 5 shelves 600 2015 580
3 R Special tall housing 2 doors, 1 aperture suit double oven 600 2015 580
4 R Tall unit for integrated fridge/freezer 2 appliance doors 600 2015 580
5 R Larder unit 1 door 1 fixed shelf 5 shelves 600 2015 580
6 Support side panel 16 2015 376
7 Base unit filler panel 70 780 16
8 Base unit 2 doors 2 shelves 1200 780 580
9 L Sink base unit 1 door 1 internal blind without back panel 600 780 580
10 Front for fully integrated dishwasher h. of appl. 82cm 600
11 Pull-out base unit 3 drawers 1 pull-out 600 780 580
Cutlery insert laminate silver-coloured
3 X Anti-slip mat for internal drawers
12 Support side panel 16 780 636
13 Support side panel for TV unit 16 390 376
14 L Wall unit used as TV floating unit HANDLE DRILLED ON SITE 600 390 370
15 Wall unit 2 doors TV floating unit HANDLE DRILLED ON SITE 1200 390 370
16 Support side panel for TV unit 16 390 376
17 Support panel for free-standing base unit 16 880 1072
18 L Base unit 1 door 2 shelves 600 780 580
19 Pull-out base unit for hob with top control 1200 780 580
1 cable protection shield 2 drawers 2 pull-outs
Cutlery insert depth 56 cm laminate silver-coloured
3 x Anti-slip mat for internal drawers
20 Base unit 2 doors 2 shelves 900 780 580
21 Support panel 16 880 1072
22 Base unit depth 46 cm 2 doors 2 shelves 900 780 460
23 Base unit depth 46 cm 2 doors 2 shelves 900 780 460
24 Base unit depth 46 cm 2 doors 2 shelves 900 780 460
25 BREAKFAST BAR Support panel CHESTNUT BASALT 60 919 550
26 WORKTOP for Breakfast Bar CHESTNUT BASALT 2100 60 550
27 Support side panel for wall unit 16 390 376
28 Wall unit with flap door 1000 390 370
2 x Built-in halogen light with cutout in base shelf of wall unit
29 Wall unit with flap door 1000 390 370
2 x Built-in halogen light with cutout in base shelf of wall unit
30 Wall unit with flap door 1000 390 370
2 x Built-in halogen light with cutout in base shelf of wall unit
31 Support side panel for wall unit 16 390 376
WORKTOP and UPSTAND (In mm’s)
40mm Worktop Length 3696 Depth 650 Sink Run TRAVERTINE GRAPHITE (sit under microwave)
40mm Worktop Length 2762 Depth 1100 Island Run TRAVERTINE GRAPHITE ** CARE cut out at breakfast bar
16mm Top Panel Length 1842 Depth 376 TV floating unit top panel CHESTNUT BASALT
(Note: worktop for Breakfast bar listed at position 26)
16mm Upstand Length 2500 Height 100 TRAVERTINE GRAPHITE
16mm Upstand Length 1196 Height 100 TRAVERTINE GRAPHITE
16mm Upstand Length 596 Height 100 TRAVERTINE GRAPHITE
ACCESSORIES
Transformer to suit built in lighting
Soft close hinges on all doors and drawers
Pop up socket on island
SINKS & TAPS
1 x Stainless Steel 1 ½ bowl (Franke/Blanco)
1 x Chrome mixer tap (Franke/Blanco)
APPLIANCES (Quote in Neff or similar)
80cm Ceramic Hob (model to be confirmed)
Double oven (model to be confirmed)
70/30 Fridge Freezer (model to be confirmed)
600mm Fully Integrated Dishwasher (model to be confirmed)
FITTERS REPORT
(use with item list/plans to get comparative fitting quotes)
This report is purely a GUIDE for the kitchen units and appliances and will vary dependent on your project. You may choose to DRY FIT which means all
cabinetry, appliances, sink etc. will be fitted but ALL electrical and plumbing connections will be made by different contractors.
No. of items Description
29 X Base/Wall Cabinets/End Panels
4 X Standard worktop (including Breakfast bar)
1 X Fit 70/30 fridge freezer
1 X Fit Double oven
1 X Fit Induction Hob (CARE check suitability of consumer unit)
1 X Integrated Dishwasher
1 X Sink and Tap
1 X Upstand/Plinth to suit plan
Misc Build box work to create floating unit (left ready to prepare and decorate)
Skip For waste removal (excluding refrigeration)
Use this Guide to start looking at your fitting costs. You may be having an extension or major building work undertaken and it makes sense to only use one
plumber/electrician. Consider any major Electrical/Gas work required as this will require specialist contractors. NOTE Induction hobs may require a change
to your consumer unit which incur extra cost.