sandpiper pumps

IDEX Proprietary & Confidential


Industry Week’s Best Plant award 2012

Warren Rupp, Inc. Mansfield, Ohio Plant,

Facility built in 1975


Sandpiper

Pumps

Standard

Duty

Heavy

Duty

Ball Valve

Type

Flap Valve

Type

Containment

Duty

Special

Duty


Metallic Pumps

• Bolted Design

• Center Ported

• Available Sizes: 1/2”, 1”, 1-1/2”, 2”, 3”, 4”

• MOC Options : Stainless Steel, Aluminum, Cast Iron, Alloy C

• Flow Rate: 0- 238GPM

• Maximum discharge Pressure – 125PSI

• Can Handle Solids up to 9.5mm in size.

• Ball Type Check Valves


Non-metallic Pumps

• Bolted Design

• Porting Option – Center, Side & Dual

• Available Sizes: 1/4”, 1/2”, 1”, 1-1/2”, 2”, 3”

• MOC Options : Polypropylene, Conductive Polypropylene, PVDF,

Conductive PVDF, Conductive Acetal



• Can Handle Solids up to 18mm in size.



Ball Valve Design:


• Bolted Design

• Bottom/Top/Side Porting Arrangement

• Available Sizes: 1”, 1-1/2”, 2”, 3”, 4”

• MOC Options : Stainless Steel, Aluminum, Cast Iron, Alloy C





Flap Valve Design:

• Flap Type Check Valves

• Bolted Design

• Bottom Discharge Porting Arrangement

• Available Sizes: 1”, 2”, 3”, 4”

• MOC Options : Stainless Steel, Aluminum, Cast Iron




Applications • Slurries with large solids

• Dense slurries with high solids content

• Ceramic slip

• Wastewater

• Waste Oil

• Fluids that settle or harden in the pump

Best for handling slurries with large solids up to

80mm/3”


• Available in both Metallic and Non-metallic construction

• All bolted Design

• Available with Leak Detection system

• Spill containment

• Un-interrupted pumping

• No damage to pump, nearby equipment's and operators • No material loss or expensive spillage cleaning operation

Best for handling aggressive, hazardous and radioactive

liquids.


Special

Pumps

High

Pressure

Pumps

Submersible

Pumps

FDA

Compliant

Pumps

Mine/

Construction

Duty Pumps

UL

Pump

USDA

Pump

Natural

Gas

Operated


Single Diaphragm High Pressure Pumps: • Metallic construction - Aluminum, Cast Iron and Stainless Steel • Works on 2:1 principle i.e. Deliver discharge

pressure twice the inlet pressure, up to 17 bar. • Designed for filter press feed and applications

requiring higher discharge pressure.

• Flow Rate – 62 GPM

• Maximum Solid size allowed: For EH2-M, 6mm For SH2-M, 50mm


• UL (Underwriters Laboratory) Pumps are designed to meet UL79 standards for diaphragm pumps handling flammable liquids.

• All Aluminum construction with approved Nitrile or Virgin PTFE UL elastomers.

• Fully groundable to prevent static discharge.

• Available size – 1”

• Flow rate – 45 GPM

• Discharge Pressure – 8.6 bar

• Maximum Solid size allowed – 6mm


The PortaPump®

• Battery powered pump, operates using any truck or car 12-volt battery.

• It comes equipped with cables and battery clips.

• Extremely portable and can fit through opening as small as 10”.

• Port size – 1½”

• Flow Rate – 43 GPM

• Maximum Solid size allowed – 1mm.

The SludgeMasterTM

• Air powered

• Designed to handle mud, leaves, twigs, sand, sludge, trash-laden water and soft solids to 1½“.

• High capacity, low head.

• Can fit through opening as small as 14”.

• Sturdy construction for rough handling.

• Port Size – 3”

• Flow rate – 300 GPM

• Maximum Solid size allowed – 40mm.


• Specially designed to meet USDA (United States Department of Agriculture)

standards.

• Available with Electronic Leak Detection system.

• Wetted parts are of Electro-polished 316 and 302/304 Stainless steel.

• Non-wetted parts are electro-less nickel plated aluminum and polypropylene.

• Fitted with food grade white Nitrile elastomer.

• Available sizes – 1”, 1½”, 2”, 2½”

• Flow Rate – 0 to 150 GPM

• Maximum solid size allowed: For Ball Valve Design - 6mm For Flap Valve Design – 27.4mm


• Ideally suited for variety of food processing, pharmaceutical and cosmetic industry applications.

• Available Sizes: Ball Valve Design – 1” to 3” Flap Valve Design – 2”

• Flow Rate – 0 to 235 GPM

•Constructed of FDA material compliant components of Stainless Steel and FDA approved Santoprene, Nitrile and PTFE elastomers. •Standard non-wetted components are white epoxy coated aluminum with stainless steel hardware.


• Certified by CSA for sweet and Sour natural gas operated diaphragm pumps. • Size : ½ ” to 3” • Ball check valves. • Flows upto 889 liters. • Solids upto 6mm. • Fully grounded design. • ESADS+Plus. • In-line serviceable.

Applications :

Crude Oil, Salt Water, Drilling Mud, Condensate,

Lubrication Oils, Glycol, Caustic liquids and Acids


Applications :

• Sump Transfer

• Muck/Slimes/Slurry transfer

• Drift Dewatering

• Drillers Mud

• Dewater High/Low PH Levels Underground


ATEX (Explosive Atmosphere)

FDA (Food and Drug Administration)

CE (Conformité Européenne)

CSA (Canadian Standards Association)

UL (Underwriters Laboratories)

USDA (United States Department of Agriculture)

ABS (American Bureau of Shipping)


Reduce air consumption up to 50%

Automatically adapts to process conditions

Powered only by compressed air – No batteries

Increases productivity

Reduce compressor maintenance

Optimizes energy and performance


Step 1: • Air enters main inlet • Small amount of air directed to turbine that powers unit Step 2: • Air Regulator Valve controls air flow volume • Air continues on standard path through air system Step 3: • Sensor monitors pump velocity, sends data to microprocessor • Microprocessor calculates ideal air usage, regulates air valve


Size – 2” & 3”

Available in both metallic and non-metallic construction

Any 2” & 3” standard and heavy duty pumps can be upgraded to AirVantage

Flow Rate – 0 to 245 GPM


• Reduce Pulsation • Reduce Leaking / Damage • Reduce Manifold Stress Use Flex Connections primarily on larger units 1 ½”, 2”, and 3”.


• No Lubrication Required • Clean / Dry Air is a Plus But Not Required.

Tip: Keeping the muffler clean will improve pump performance. A dirty muffler can lead to stalling.


• Thermal Expansion • Positive Inlet Pressure • Head Pressure

“The Windows to Pump Performance”


Leak Detection Filter/Regulator Stroke counter/Batch control

Level Controllers Surge suppressors Air Dryer


Skid systems High pressure, filter press feed systems Mobile skid systems Custom environmental protection

packaging Heat jacket systems


Sandpiper Mobile app

My Pump Details Chemical Compatibility Guide Full line catalogs Service & training videos

http://www.sandpiperpump.com/mobile_app.asp


Quality Assurance


Assembly cycle testing with hold pressure vacuum readings (standard)

Certified one-point head capacity tests Certified additional points Dry lift testing

Hydro/pneumatic testing 90 psi (standard) Hydro/pneumatic 1½ times maximum operating

pressure

Pump repair (labor only)

AODD Project Capabilities

Service Description


Certificate of origin Certificate of conformance (Pump) Standard non-certified dimensional outlines (to order

contact Application Engineering) Certified dimensional outlines Material test reports (MTR) Certificate of compliance (Material)

Epoxy, water based, two part (exterior only Customer specific PTFE Halar Nickel plating midsection

Custom and Engineered products and system to meet

your application Custom product dimensional outlines


Service Description


Four (4) lines, maximum 24 letters Custom Nameplate PMI (Positive material identification Hardness testing Liquid penetrant testing Radiographic testing Magnetic particle testing Other

Impact test Seismic test Sound test Other


Service Description


http://www.idexindia.in/sandpiper-pump/


Savli, Vadodara

IDEX Fluid & Metering – Manufacturing facility SandPiper AODD Pumps in India


IFMT - AODD Value Stream


Our Contacts Manufacturing Facilities:

SANDPIPER Pump

800 North Main Street

Mansfield, Ohio 44902 USA

Tel: +1 (419) 524-8388

Fax: +1 (419) 522-786

IDEX Fluid & Metering Pvt. Ltd.

Survey No. 256, GIDC Manjusar, Savli

Near Bombardier Circle,

Distr. Vadodara 391770, India

Tel: +91-2667-662-001

Sales & Support

SandPiper Pump - Mumbai

S 14, First floor

Solitaire Corporate Park, 167, Guru Hargovindji Marg,

Chakala,

Andheri (East), Mumbai 400 093

Tel: +91-22 6643-5552/5555

Email: [email protected]

SandPiper Pump - Delhi

4th flr, Office No. 801 Statesman House, Barakhamba

Road Connaught Place

New Delhi 110001

Tel: +91-11-3044-6482


SandPiper Pump - Chennai

The Executive Centre, Tamarai Tech Park Level 5,

S.P.Plot No.16-19 & 20-A,

Thiru Vi Ka Industrial Estate, Inner Ring Road, Guindy,

Chennai 600032, India

Tel: +91 44 6693 6630


mailto:[email protected]



sandpiper pumps

Engineering

gpm discharge pressure

gpm maximum discharge

design available

higher discharge pressure

diaphragm pumps

inlet pressure

gpm maximum solid size

cast iron flow rate