save up to 90% on energy costs • instant start. flicker...
TRANSCRIPT
Tel: +44 (0)330 5554433 www.loxa.co.uk
102 Kirkstall Road LEEDS LS3 1JA (UK)
• Save up to 90% on energy costs
• Instant start. Flicker free
• No mercury or other hazardous materials
• >60,000 hours. Low heat
• Food-safe polycarbonate covers
55
Part Code
Light colour
Ra, Consistency
Luminous flux, Candela
Beam angles
Warm up time
Dimming
Power input (50-60Hz 110-230VAC)
Power factor & Current
Lamp type
Fire resistance
Working temperature
Construction
Features
20.1W
0.97, 0.5A
Samsung 561B+ SMD
FR materials
IP65, Sensor port
40.3W
0.97, 1.0A
Samsung 561B+ SMD
FR materials
60.4W
0.97, 1.0A
Samsung 561B+ SMD
FR materials
>_ >_ >_
A++, 108 llm/cW
20.1 kWh/1000h
100,000x
Part L, Part E compliant
>60,000 h
5 years
A++, 108 llm/cW
40.3 kWh/1000h
100,000x
Part L, Part E compliant
>60,000 h
5 years
A++, 108 llm/cW
60.4 kWh/1000h
100,000x
Part L, Part E compliant
>60,000 h
5 years
FL-060-4K-B-S-1FL-020-4K-B-S-1 FL-040-4K-B-S-1
4000 K
Ra80, 3-4 SDCM
2180 Lm, 803cd
X104° Y61°
Instant
Options
4000 K
Ra80, 3-4 SDCM
4361 Lm, 1607cd
X104° Y61°
Instant
Options
4000 K
Ra80, 3-4 SDCM
6542 Lm, 2410cd
X104° Y61°
Instant
Options
335
234
258
153
335
234
Flood Lights
Efficacy
Ec (Energy consumption)
Switching cycles
Building / Wiring Regs
Lifetime (L80)
Warranty
Country of origin United Kingdom United Kingdom United Kingdom
-30°c, +45°c -30°c, +45°c -30°c, +45°c
Aluminium case, polycarbonate covers, Alanod reflectors, stainless steel brackets
IP65, Sensor port IP65, Sensor port
FL-020-4K-B-S-1FL-040-4K-B-S-1FL-060-4K-B-S-1
FixingFittings include an L bracket suitable for most wall fixings. All Loxa flood lights incorporate an asymmetric reflector array designed to be compliant with the dark sky initiative and meet UK planning requirements for exterior lighting. Loxa COMPACT floodlights should be mounted at 25° to the vertical to provide maximum light output to ground.
MOUNT AT A 25° VERTICAL ANGLE
Ecology in UK manufacturingWith reliability and longevity our top priorities, we are very proud of the products that we manufacture – all Loxa products are rigorously checked and tested at various stages throughout assembly. However, we also adhere to ecological production principals, so we do not reject for minor cosmetic defects if they will not affect performance or lifetime and won’t be visible when installed.
All fittings are manufactured with UK die cast casings using premium LM24 grade aluminium. The casings are then dipped to receive an Iridite NCP coating that is actually rated to provide 3,000 hours salt-spray protection on its own. But we don’t stop there; we then treat all flood lights with a tough two-pack epoxy black finish. Stainless steel screws and fastenings are used throughout the assembly process, and with the addition of 304 grade stainless steel brackets (galvanised mild steel in earlier models) and UV2 polycarbonate lamp covers, Loxa products can handle the harshest climates.
COMPACTFlood Lights
25°mounting angle
55°
5°
The right angle notch should lineup with the small indent to achieve a 25° vertical mounting angle.