Seating - Timber Finishes & Stains Seating - Metal & Plastic Finishes

Bright Chrome

Upgrade Option

American Black Walnut

Oak Beech with clear lacquer

Standard Wood Finishes

Beech with Cherry stain

Beech with Dark Oak stain

Beech with Ebony stain

Beech with Light Oak stain

Beech with Mahogany Stain

Beech with Walnut stain

Beech with Wenge stain

Beech Stains

White Stain with 10% Clear Lacquer

Green Stain with 10% Clear Lacquer

Yellow Stain with 10% Clear Lacquer

Red Stain with 10% Clear Lacquer

Blue Stain with 10% Clear Lacquer

Orange Stain with 10% Clear Lacquer

Black Stain with 10% Clear Lacquer

Painted Frames - Oak

This section is to be used as a visual colour representation only. If you require accurate swatch samples

please contact our sales office who will be able to supply them to you.

Please note that not all finishes listed here are available on every product in our portfolio, so please check

the product specifications listed on the product pages for compatibility.

This section is to be used as a visual colour representation only.

If you require accurate swatch samples please reference a RAL swatch card.

Please note that not all finishes listed here are available on every product in our portfolio, so please check

the product specifications listed on the product pages for compatibility.

Jet Black RAL 9005 Anthracite RAL 7016 Signal White RAL 9003Silver RAL 9006

White RAL 9016 Yellow RAL 070 70 80Orange RAL 040 50 60

Purple RAL 4007Blue RAL 240 20 22 Green RAL 130 30 20

Grey RAL 060 60 05

RAL Colours

Polished Aluminium Stainless Steel Satin Silver

Standard Metal Finishes

NB. Due to the limitations of printing techniques, the colours of the above swatches will vary slightly to those depicted

in the physical colour swatch books. These swatches should only be used as a guide and actual samples (wood & wood

stains) are available on request from our Sales Office. We reserve the right to change the colour specifications without

prior notice.426

AP

PE

ND

IX -

FIN

ISH

ES

NB. Due to the limitations of printing techniques, the colours of the above swatches will vary slightly to

those depicted in the physical colour swatch books. These swatches should only be used as a guide and

actual samples (wood & wood stains) are available on request from our Sales Office. We reserve the right to

change the colour specifications without prior notice.

Table Top & Credenza Finishes

American Black Walnut

Oak Beech

Veneers

Aquavert 4180

Mushroom 4176

Burgundy 4154

Pewter 4155

Charcoal 4166

Pistachio 4183

Mauve 4172

Vapour 4177

Linoleum - Standard Colour Options

Moss Button Green Blue Ice Paprika

Black Designer White Silver Grey Dove Grey

Resopal - Standard Laminate Colour Options

Verde Comodoro

Doha TitanioGrigio Bromo

Blu FesRosso Jaipur

Bianco Kos

Beige Arizona

Nero Ingo

Fenix - Standard Colour Options

MF MDFMelamine Faced Medium-density fibreboard (MDF) provides

many of the advantages of MDF with a decorative and hard

wearing surface layer. The melamine has a subtle burnished

surface detail which is slightly textured.

Oak or Black American Walnut VeneerVeneered Medium-density fibreboard (MDF). At Boss Design

we use American Black Walnut and European Oak decorative

veneers to give your table top that natural finish. The table top

edge is finished with a matching veneered edge band.

Resopal LaminatesResopal laminates are resistant to impact, scratching and

abrasion, it is resistant to heat and light, resistant to stains, easy

to clean and to disinfect, resistant to water, steam, solvents and

largely to chemicals.

Forbo Desktop LinoThe linoleum collection consists of several elegant colours that

add a distinctive touch to our table tops. Forbo desktop lino has

a water based finish that prevents scratching and staining, while

at the same time ensuring that the surface is warm to the touch

with a nice matte finish.

FenixFenix NTM (Nanotech Matt Material) involves the use of nano-

technology to produce a very pleasing soft touch surface that

boasts low light reflectivity alongside impressive anti fingerprint,

scratch resistance and rub resistant credentials.

Should you wish to discuss an alternative finish not offered

throughout our portfolio, please contact your local sales

representative or our internal sales team on 01384 455 570.

This section is to be used as a visual colour representation only. If you require accurate swatch samples

please contact our sales office who will be able to supply them to you.

Please note that not all finishes listed here are available on every product in our portfolio, so please check

the product specifications listed on the product pages for compatibility.

Table Leg/Credenza Wire Foot Finishes

Black RAL 9005 White RAL 9016 Silver RAL 9006

RAL colours outside of these standard optional are price on a POA basis and are subject to MOQ’s.

428

AP

PE

ND

IX -

TA

BLE

TO

P F

INIS

HE

S