seek and find! modul-port table of contents filemodul-port 1 seek and find! table of contents the...

modul-port

1

SEEK AND FIND!TABLE OF CONTENTS

The ideal platform

Philosophy and practice

Supports for flat screens with VESA 75 / VESA 100 Adapter 16

Carrier for Philips IntelliVue MP90 20

4

2

Carriers for Philips IntelliVue MP20 to MP70 28

ITD support extrusion and mounting accessories 34

Keyword index 58

Order number index 57

The modular system for individual solutions 6

Who needs what? 8

Cable management 12

Equipment mounts 38

Keyboard holder 44

Computer holder 50

Shelves and drawers 46

Accessories and holder for small parts 51

Carrier for monitors with universal adapter 22

Carriers for Nihon Kohden Life Scope Monitors 24

Adapter plates for monitors from other manufactors 26

Setup solutions

Upgrading and retrofitting components

Technical data 14

modul-port teil 1_englisch.qxd.qxd 21.01.2006 18:50 Seite 1

Edition 3/2007

2

PHILOSOPHY AND PRACTICE

This catalogue presents the statio-nary solution modul-port. modul-port is a future-proof statio-nary support system that can bemounted on walls, ceilings, worktopsor free-standing.The modular structure and the largeselection of components allow it to beexpanded at any time and up-gradedto meet a wide range of special re-quirements.

Mobil or stationary – ITD setsbenchmarksOur product range is based on twosuccessful pillars: mobile equipmentcarriers with uni-cart, duo-cart, com-pact-cart, classic-cart and endo-cartand the stationary carrier systemmodul-port.

See page 62 for order reference relating to the catalogue "MobileEquipment Carts".

Mobile equipment cart compact-cart


Edition 3/2007

modul-port

3

ITD carrier systems“Responsibility Owners”Nowhere else is the absolute reliabilityof technology so decisive as in medi-cine. This is because medical person-nel and patients need to have totalconfidence in the equipment . It should remain discretely in thebackground, while being always safeand mission-ready at any time. We areoffering all our technical and ergono-mic know-how, our innovative poten-tial, manufacturing precision and high-quality processing in order tomaster this challenge. Our self-assess-ment of “Responsibility Owner” hastransformed our carrier systems intoone of the leading brands for hospitals, laboratories and practices within the space of a very short periodof time.

We don’t leave quality and safety tochance.

This concept begins in the factoryitself. The DIN ISO 9001 certificate forour quality assurance system is thebest testimony to our dedication.

3

2

1

they are nevertheless important ele-ments in their working environment.That’s why we place particularemphasis on professional and functio-nal design that is also contemporaryand stylish. This approach has contri-buted to the speed at which statio-nary and mobile products from ITDhave powered to success in all medi-cal applications.

"New-born intensive care " LMU Munich Perfection with every movement

View of production facility

1 2

3

And the track record continues withcertificates for our products that arewithout exception subject to the moststringent quality and safety inspec-tions.

Design is essential.Even if our equipment carriers performtheir services rather unobtrusively,


Edition 3/2007

4

THE IDEAL PLATFORMFOR YOUR SOLUTIONS

The demands of routine practiceon a day-to-day basis are deman-ding and multifaceted. That's whythe flexibility of the modul-port sta-tionary support system is highlyvalued and the system is beingdeployed in an increasing numberof hospitals.

The modular structure and a com-prehensive range of accessories re-fined down to the last detail allow thissupport system to be configured tosuit individual requirements. It can betailored for deployment in a largenumber of different medical settings,meeting the needs of varied equip-ment systems and independently ofthe space available.

Areas of application are, e.g.

Intensive-care units

Operating theatres

Recovery rooms

Monitoring units

Documentation workstations

Patient monitoring


Edition 3/2007

modul-port

5

10 good reasons in favour ofmodul-port:

1. Universal deployment ...

on the wall, on the ceiling, on the

ground and on worktops

2. Modularity ...a large number of components asstandard

3. Simple assembly ...Simply hook in, screw tight, finished!

4. Power supply ...Power where it's required.Cabling with out a tangled massof cables (see page 12/13 forcabling concept)

5. High level of variability and flexibility for setup ...Why don't you request your tailormade solution?

6. Design ...The modern design underscoresthe value of the equipment to beintegrated.

7. Hygiene ...Resistant to cleaning agents anddisinfectants. The design facilita-tes cleaning operations.

8. Quality ...ISO 9001 certified and test by theGerman Technical Inspectorate(TÜV).

9. Future-proof ...Modify and upgrade with newcomponents as required

10.Value for moneyCompare for yourself!

Easy upgrading e.g. with a computerholder

Power supply

High level of future-proof capability

Simple assembly

Universal applications


Edition 3/2007

6

THE MODULAR SYSTEMFOR INDIVIDUAL SOLUTIONS

modul-port offers all the features for awide range of diverse applications.In patient monitoring scenarios, in-tensive-care units and operating theatres, emergency units and moni-toring centres, anaesthetic settings orIT centres. The carrier systems arecapable of accommodating a rangeof diverse equipment, e.g. 15" to 20"monitors and flat screens, printers,computers, infusion pumps and infu-sion bottles, gas bottles, monitoringor ventilators

You can find the solution by justanswering three simple questions:

1. Which items of equipmentshould be assembled?

3. What level of comfort (supportarm, pivot arm - single, pivot arm - double or variable height arm?) orequipment mount (pump support,keyboard holder, shelf, drawer, basketetc.) is required?

EQUIPMENTSUPPORT ARMS AND EQUIPMENT


Edition 3/2007

modul-port

7

3. What type of fixing is envisagedor what infrastructure is available?(ITD support extrusion, standard run-ner vertical or horizontal, existing wallsupport extrusion, 38 mm supportbar, etc.)

This means it’s possible to designmodul-port to be tailormade for yourapplication and the individual workingenvironment. We will be pleased toprovide you with advice and on-sitesupport in cooperation with our spe-cialist dealers.

MOUNTING

MOUNTING AND INFRASTRUCTURE

Please note: Questions are always identified witha colour and dedicated to one ofthe tree levels. This is intended tohelp you to use this catalogue andidentify the level you are currentlyin.


Edition 3/2007

WHO NEEDS WHAT?APPLICATIONS/ASSEMBLY OPTIONSENDOSCOPY WORKSTATION

8

Endoscopy workstation

Carriers for ceiling assemblyOperating theatres are one exampleof a setting where an equipment car-rier mounted on a ceiling delivers themost elegant solution. This is becau-se it offers access from all sides, doesn’t take up much space and allows the area underneath to beused for other purposes.This shows an example of an endoscopy workstation.


Edition 3/2007

DOCUMENTATION WORKSTATION

Carrier for wall-mountingThey are very often the natural andbest solution because they are com-pact and only require minimal resour-ces for assembly. Suitable walls are aprerequisite for accommodating thiscarrier system. There also needs tobe good access for connections andcabling.

Documentation wotkstation

Carrier for mounting on worktopsThe ideal solution for user-friendly working. It allows users to adopt ergonomi-cally correct positions whether standing or sitting, while simultaneouslymaking full use of the worktop.

Mounting on worktops


Edition 3/2007

INTENSIVE CARE WORKSTATION

Support system for mounting onwall supply duct and standard runnerThis particularly user-friendly form ofassembly is frequently used for moni-toring patients.

Intensive care workstation


Edition 3/2007

modul-port

Support systems for freestandingassemblyA location that can be accessed fromall sides is frequently the most usefulsolution. The support system canthen be accessed from all sides andcan be positioned at the appropriatelocation in the room. Freestandingsupport systems are also extremelyuseful if existing sliding walls or parti-tions are not strong enough to supportsafe assembly.

11

Fluid management


Edition 3/2007

12

One of the outstanding product fea-tures of the stationary carrier systemmodul-port is the possibility of a directcable routing in the support profile.

The electrification of your modul-portcan be effected without huge expendi-tures of work and time.

Time-consuming cable routing is nolonger necessary. Switches andconnections can be positioned wherethey are needed.

An additional cabling option is provi-ded by attaching two further cableducts to the side and they can be clicked into the existing T-slots. This provides an elegant separation ofpower and data cables.

Staff working in operating theatres andon intensive-care and recovery wardsknow the value of perfect cabling.

CABLE MANAGEMENTCABLING CONCEPTPOWER SUPPLY


Edition 3/2007

modul-port

13

A further highlight of the cabling andelectrification concept of modul-portis the possibility to mount completesocket strips of different standardsdirectly into the support profile. Thesocket strips are flush with the coverstrip.

The cable routing is continued out ofthe support profile along the down-side of the support arms. Through acable duct the cabling is guided direc-tly to the device.A perfect solution for the power anddata cable management

Concerning electrification safety isvery important! Therefore strain reliefsare mounted on each cable outlet to adevice.


Edition 3/2007

TECHNICAL DATA

14

Screw channels for mounting on the face side

Wall-mounting

Accommodating cable ducts and assembly option for accessories

Screw fitting to accommodate support extrusions

Mounting level for all support arms and add-on elements with the assistance of tapped strips

Engaging the cover strips

Mounting for cable and hose clamps

Rigid, hollow-chamber support extrusion with T-slots for flexible mounting of assemblies. The finish for the support extrusions is natural anodized.

Carrier panel

Joints with wheel locks

Arm extrusion

Cable duct for separate routing of power and data lines or hoses

Cover strips

Strain reliefs

Large volume cable duct15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

Design elements

1

2

3

7

12

14

5

4

6

13

10

8

9

15

11


Edition 3/2007

modul-port

15

Material / Finish

Long service life and high level of reliability with the use of high-quality materials and the type of design:Support extrusions and arms made of high-strength ALMgSi0.5F25.The finish of the support extrusions is natural anodized, the arm extrusions are finished in RAL 7035 light greypowder-coated.

Joints made of high-strength spheroidal graphite cast iron, Finish RAL 7035 light grey powder-coated

Sheet-metal parts made of zinc-plated sheet steel,Finish RAL 7035 light grey powder-coated

Plastic parts are made of ABS, similar to RAL 7035 light grey,or RAL 7016 anthracite (cover caps and strain relief)

Precision slide bearing

Tapped strips made of steel, zinc-plated for mounting all assemblies on the column, with holes M6 at 32 mm centres

Spring nut M5 or M6

Corner elements and handles in RAL 5021 water-blue, RAL 5013 cobalt blueor RAL 7035 light grey.

Hygiene

The selected materials and finishes are resistant to most conventional disinfectants and cleaning agents.

The design has also been developed so that all products can be cleaned easily.

Safety

All products have been tested in conformity with DIN EN 60601-1, UL 2601-1 and by the German TechnicalInspectorate's TÜV Product Service.

ITD offers adaptation options for the following support systems:

ITD support extrusionStandard runners (25 mm x 10 mm) - horizontal and verticalExisting wall support extrusionsBar Ø 38 mmOther adaptations are available on request


Edition 3/2007

ITD support extrusion Bar D 38 mm

Adapter VESA 75 / VESA 100directly on ITD support extrusion

Adapter VESA 75 /VESA 100directly on bar D 38 mm

140

SUPPORTS FOR FLAT SCREENSWITH VESA 75 /VESA 100 ADAPTER - UP TO 8 KG

16

Setup solutions1. What equipment should be assembled? => Flat screen with VESA 75 / VESA 100 adapter

The swivel and tilt monitor bracket accommodates moni-tors with VESA 75 or VESA 100 adapter and permits a tiltof ± 15° and a swivel range of ± 80°.

The frictional force can be variably adjusted dependingon the weight of the monitor.

Finish:RAL 7035 light grey

Load capacity:Please note the weight specifications provided in thetable. They relate to the load rating of the complete arm.The monitor bracket has a load rating of 8 kg /17.6 lbs.The sum of all the items of mounted equipment must notexceed the maximum load capacity.

Order options on page 17 !Sample application

ADAPTER FOR DIRECT MOUNTING OF FLAT SCREENS WITH VESA 75 / VESA 100 ADAPTER - UP TO 8 KGTechnical description as above.

145

Order number TS 6300.1 Order number TS 6310.1


Edition 3/2007

Horizontalstandard runner

ITDsupport extrusion

suitable forGCX wall support extrusion

Bar D 38 mm

Support armon horizontal standard runner

Load capacity: 23 kg / 50.6 lbs

Support armon ITD support extrusion

Load capacity: 35 kg / 77 lbs

Support arm on GCX wall support extrusion


Support arm on bar D 38 mm


Pivot arm - singleon horizontal standard runner


Pivot arm - single on ITD support extrusion


Pivot arm - single on GCX wall support extrusion


Pivot arm - single on bar D 38 mm


Pivot arm - double on ITD support extrusion


Variable height armon horizontal standard runner


Variable height armon ITD support extrusion


Variable height arm on GCX wall support extrusion


Variable height armon bar D 38 mm


400400400400

348

408

412402408

396

236216

218252

17

modul-port2. What comfort level or equipment mount is required?

3. What mounting is envisaged?S

upp

ort

arm

Piv

ot

arm

- s

ing

leP

ivo

t ar

m -

do

uble

Vari

able

hei

ght

arm

See page 37 for adapter for vertical standard runner

Order number TS 6316.1 Order number TS 6313.1 Order number TS 6318.1 Order number TS 6320.1

Order number TS 6317.1 Order number TS 6314.1 Order number TS 6319.1 Order number TS 6321.1

Order number TS 6315.1

Order number ZV 9539.9 Order number ZV 9538.9 Order number ZV 9540.9 Order number ZV 9541.9

Edition 3/2007

18

Setup solutions1. What equipment should be assembled? => Flat screen with VESA 75 / VESA 100 adapter

MONITOR BRACKET FOR FLAT SCREENSWITH VESA 75 / VESA 100 ADAPTER - UP TO 14 KG

Support arm on ITD support extrusion with two monitor brackets for VESA 75 / VESA 100

Support arms for two monitors on request !!

540

210

The swivel and tilt joint permits a tilt of ± 15° and a swivelrange of ± 80°. The depth and the height of the monitorbracket can be adjusted and can therefore accommoda-te a very wide range of monitors with VESA 75 or VESA100 adapter weighing up to 14 kg. The frictional forcecan be adjusted variably depending on the weight of themonitor.

Heavy monitors can be adjustedparticularly easily because thecentre of gravity of the monitor isprecisely on the swivel axis


Load capacity:The monitor bracket has a loadrating up to 14 kg/30.8 lbs. Theorder table on page 17 providesthe load capacity of the completearm.

When you place an order:You should select the desired version of the support armon page 17 and add to this number the order number ofthe monitor bracket TS 0400.1. The brackets are exchanged and you receive the fullyassembled support arm with the monitor bracket with a load rating up to 14 kg.

Sample application

Sample application

Order number

Monitor bracket for flat screens with VESA 75 / VESA 100 up to 14 kg TS 0400.1


Edition 3/2007

19

modul-port

For mounting flat screen with VESA 75 or VESA 100adapter.Flat screen and keyboard are height-adjustable as oneunit

Comprising: 1 height adjuster with monitor handle, swivel and tilt unit, keyboard holder with mousepad

Load capacity: 7 - 10 kg / 15.4 - 22 lbs

Finish: Vertical column: aluminium anodized, Monitor handle: powder-coated

trim colours see1)

All other elements are powder-coatedRAL 7035 light grey

Please note:If you order a height adjuster, make sure you also order asupport extrusion of the right height separately.

Support extrusion Economy for height adjustment

Comprising: Support extrusion 30 U or 40 UCap top and bottomCover strips

Finish:Plastic parts similar to RAL 7035 light grey or RAL 7016 anthracite (caps)Support extrusion: aluminium natural anodized

How supplied: Pre-assembled, including mounting hardware

Sample application

1) Trim colour: Make sure you replace .X by .1 = RAL 5021 water blue, .2 = RAL 5013 cobalt blue, .3 = RAL 7035 light grey

Order number

Height adjustment RS 4380.X

Support extrusion Economy for height adjustment 30 U (960 mm) TS 6035.1

Support extrusion Economy for height adjustment 40 U (1280 mm) TS 6036.1

HEIGHT ADJUSTMENT WITH MONITOR HANDLE, SWIVEL AND TILT UNIT


Edition 3/2007

CARRIER FOR PHILIPS INTELLIVUE MP90 WITH VESA 75 / 100 ADAPTER WITH POSTS - UP TO 8 KG

20

Setup solutions1. What equipment should be assembled? => Philips IntelliVue MP90 with VESA 75 / VESA 100 Adapter

These products are optimally suited to Philips MP90applications.The swivel and tilt unit permits a tilt of ± 20° and a swivelrange of ± 80°.

You will find other accessories for MP90 in our Philips Catalogue. Please ask for this catalogue.

The post is used to mount the external racks. The post can be swivelled for the support arm and pivot arm - single.

Dimensions: Long post 288 mmPost diameter 28 mm

Finish:RAL 7035 light greyPost: aluminium natural anodized

Load capacity:The swivel and tilt unit has a load rating up to 8 kg /17.6 lbs and the post up to 10 kg / 22 lbs.Please note the weight specifications provided in thetable. They relate to the load rating of the complete arm.The sum of all the items of mounted equipment must notexceed the maximum load capacity.

Sample application

Sample application


Edition 3/2007


ITD support extrusion


Bar D 38 mm



Pivot arm - single on horizontal standard runner














302

21


3. What mounting is envisaged?

284280269

188

400400 400

Sup

po

rt a

rmP

ivo

t ar

m -

sin

gle

Vari

able

hei

ght

arm


Order number TS 6265.4 Order number TS 6261.4 Order number TS 6259.4

Order number ZV 9688.1 Order number ZV 9690.1 Order number ZV 9692.1



Edition 3/2007

22

Setup solutions1. What equipment should be assembled? => Patient Monitoring

CARRIERS FOR MONITORS WITH UNIVERSAL ADAPTERS - UP TO 14 KG

The swivel and tilt unit incl. universal adapter plate isintended to accommodate monitor-specific adapter plates. It permits a tilt of ± 15° and a swivel range of ± 80°.The frictional force can be variably adjusted up to max. 14 kg /30.8 lbs.

You will find some examples of monitor-specific connections on page 26/27.


Load capacity:Please note the weight specifications provided in thetable. They relate to the load rating of the complete arm.The universal adapter has a load rating up to 14 kg /30.8 lbs.The sum of all the items of mounted equipment must notexceed the maximum load capacity.

Scope of supply: Jointed arm including universal adapter plate

Sample application

Sample application


Edition 3/2007











Load capacity: 23 kg / 50,6 lbs





Pivot arm - double on ITD support extrusion



Load capacity: 15 kg / 33 lbsllblbs



Variable height armon GCX wall support extrusion


23



402408396

216252

218

400

408

348

400

400

Sup

po

rt a

rmP

ivo

t ar

m -

sin

gle

Piv

ot

arm

- d

oub

leVa

riab

le h

eig

ht a

rm







Edition 3/2007

24

Setup solutions1. What equipment should be assembled? => Monitors from Nihon Kohden

CARRIERS FOR NIHON KOHDENLIFE SCOPE MONITORS

Nihon Kohden Life Scope I + L + N Nihon Kohden Life Scope A Nihon Kohden Life Scope P

These products have been especially configured forNihon Kohden Life Scope monitors.The swivel and tilt unit with universal adapter plate andLife Scope connection panel permits a tilt of ± 15° and aswivel range of ± 80°.

Finish:RAL 7035 light grey Load capacity:Please note the weight specifications provided in thetable. They relate to the load rating of the complete arm.The universal adapter has a load rating of 14 kg / 30.8 lbs. The sum of all the items of mounted equipmentmust not exceed the maximum load capacity.

Note for scope of supply: A 20 U high support extrusion is included in the scopeof supply for all variants of the ITD support extrusion.See page 33 for desk adapter for Nihon Kohden moni-tors!

Sample application

Holder for CO2 unit Nihon Kohden

for assembly on support armcan only be used withNihon Kohden monitor

Order number TS 0300.1Sample application


Edition 3/2007





Support armon ITD supportextrusion


Pivot arm - singleon horizontal standard runner


Pivot arm - singleon ITD supportextrusion


Pivot arm -double on horizontal standard runner

Load capacity: 15 kg /33 lbs

Pivot arm - double on ITD supportextrusion


Variable height armon horizontalstandard runner


Variable height armon ITD supportextrusion


218

400

408

348

396

348

396

25

2. What comfort level or equipment mount is required?

3. What mounting is envisaged? modul-portS

upp

ort

arm

Piv

ot

arm

- s

ing

leP

ivo

t ar

m -

do

uble

Vari

able

hei

ght

arm

Monitor type Order number

Life Scope I, L + N TS 9017.1Life Scope A TS 9017.1 + TS 0298.1Life Scope P TS 9017.1 + TS 0288.9
















252

408

400

Edition 3/2007

26

ADAPTER PLATES FOR MONITORS FROM OTHERMANUFACTURERS

Adapter plate for Schiller Argus LC


Adapter plate for GE Critikon Pro 100


These adapter plates can be used with our carriers for monitors with universal adapters.Use the order table on page 23 to identify your desired comfort level (support arm, pivot arm - single / double, variable height arm) and the associated suitable mounting.Then add the order number of the adapter plate you require to this order number.

Comprising: Adapter plateMounting hardware

Dimensions: 126 mm x 122 mmMaterial: Aluminium, anodized

Setup solutions1. What equipment should be assembled? => for example Monitors from Schiller, GE




Edition 3/2007

27

modul-port

Adapter plate for GE Dash 4000





Edition 3/2007

CARRIER FOR PHILIPS INTELLIVUE MP20 - MP50WITH QUICKMOUNT ADAPTER

28

Setup solutions1. What equipment should be assembled? => Philips IntelliVue MP20 - MP50

For accommodating Philips monitors with Quickmountadapters and combination monitor/EGM.

The swivel and tilt unit with Quickmount adapter permitsat tilt of ± 15° and a swivel range of ± 80°.The frictional force can be adjusted variably dependingon the weight of the monitor.


Load capacity:The swivel and tilt unit has a load rating up to 16 kg /35.2 lbs.Please note the weight specifications provided in thetable. They relate to the load rating of the complete arm.The maximum load must not be exceeded.

Sample application

Sample application

Sample application


Edition 3/2007




Bar D 38 mm























400400400

316402

312300

172

216188218

29








Trag

arm

Piv

ot

arm

- s

ing

leVa

riab

le h

eig

ht a

rm



Edition 3/2007

CARRIER FOR PHILIPS INTELLIVUE MP60 / MP70WITH QUICKMOUNT ADAPTER

30

Setup solutions1. What equipment should be assembled? => Philips IntelliVue MP60 / MP70

The swivel and tilt unit with Quickmount adapter permitsat tilt of ± 15° and a swivel range of ± 80°.The post is used to mount the external racks. This post can be swivelled for the support arm and pivot arm - single.The frictional force can be adjusted variably dependingon the weight of the monitor.

Dimensions:Length of post 288 mmPost diameter 28 mm

Finish:RAL 7035 light greyPost: aluminium natural anodized

Load capacity:The swivel and tilt unit has a load rating up to 16 kg /35.2 lbs and the post up to 10 kg / 22 lbs.Please note the weight specifications provided in thetable. They relate to the load rating of the complete arm.The maximum load must not be exceeded.

Sample application

Sample application


Edition 3/2007




Bar D 38 mm























172216

218

31



402316312

300

188

400400 400

Sup

po

rt a

rmP

ivo

t ar

m -

sin

gle

Vari

able

hei

ght

arm






See page 37 for adapter for vertical standard runner Edition 3/2007

32

Desk adapter for Philips IntelliVue MP20 to MP50 with Quickmount

Comprising: Desk adapterCounter plateSwivel and tilt Quickmount unit

additional to :Column with vertical holder H 128 mm

Finish:Column: RAL 7035 light grey, Support post: aluminium natural

anodizedLoad capacity:Quickmount adapter: 16 kg / 35.2 lbsTotal: 20 kg / 44 lbsHow supplied:Pre-assembled including mountinghardware

Please note: The desk adapter is mounted to the drilled worktop using the screws and counter plate supplied.

2

Desk adapter with bracket VESA 75 / VESA 100

Comprising: Desk adapterCounter plateSwivel and tilt bracket VESA 75 /VESA 100 for flat screens

Finish:RAL 7035 light greyLoad capacity:14 kg / 30.8 lbsHow supplied:Pre-assembled including mountinghardware

Please note: For mounting on the desk top only 4 drill holes are necessary.Mounting on desk tops of a thickness up to 40 mm.

DESK ADAPTER AND BED MOUNTFOR PATIENT MONITORS

Desk adapter Order number

for Philips IntelliVue MP20 to MP50 with Quickmount 1 TS 6025.1

for Philips IntelliVue MP60 / MP70 with Quickmount and vertical holder2 TS 6157.4

Order number

Desk adapter with bracket VESA 75 / VESA 100 TS 6158.1

1 2

Sample application

Sample application

Sample application

Edition 3/2007

Desk adapter for Nihon Kohden Monitors

Comprising: Desk adapterCounter plateUniversal adapterAdapter plate Life Scope

Load capacity: 14 kg / 30.8 lbsFinish: RAL 7035 light greyHow supplied: Pre-assembled

including mountinghardware

Please note:The desk adapter is mounted to thedrilled worktop using the screwsand counter plate supplied.

33

modul-port

Desk adapter Order number

for Nihon Kohden Life Scope I, L + N TS 9021.1

for Nihon Kohden Life Scope A TS 9021.1 + TS 0298.1

for Nihon Kohden Life Scope IP TS 9021.1 + TS 0288.9

Bed mount

For fixing monitors to the bed frame

Finish:Side sections: PE-coated

similar to RAL 9016Traffic white

Base plate: powder-coatedsimilar to RAL 9016Traffic white

Load capacity: 5 kg / 11 lbsScope of supply: 1 bed mount

incl. universaladapter

Order number

Bed mount MZ 6002.9

Sample application

Sample application


Edition 3/2007

Support extrusion Installation heightH

Load capacityOrder number

Support extrusionEconomy

1 Support extrusion2

Support extrusion 10 U1) 320 mm 35 kg / 77 lbs TS 6040.1 TS 6006.1






34

1) 1 U = 32 mm

ITD SUPPORT EXTRUSION

Support extrusion

Support extrusion Economy for wall mountingComprising: 1 Support extrusion with tapped strips, mounting grid 32 mm, in both front T-slots

Cap top and bottomCover strips

Support extrusion for wall mounting

Comprising as but: Instead of caps bottom: cap with strain reliefContinuous cable duct on one side with a strain reliefSeveral cable ducts and strain reliefs on the other side (depending on length)

Finish: Plastic parts similar to RAL 7035 light grey, or RAL 7016 anthracite (caps and strain relief)Support extrusion: aluminium natural anodized


1

2

1

1 2

2)

2)

2) 128 mm = 4 U, clearance for mounting support arm with ITD support panel

Suitable walls are a pre-requiste for reachingthe indicated loadcapacity!


Edition 3/2007

Twin support extrusion Installation height H Load capacity Order number

Twin support extrusion 30 U1) 960 mm 100 kg / 220 lbs TS 6031.1



Twin support extrusion

For floor or ceiling mounting

Comprising: Mounting for twin supportTwin support with tapped strips, mounting grid 32 mm, in 4 T-slotsCable ductsStrain reliefsCover stripsExtrusion cover

Finish: Plastic parts similar to RAL 7035 light grey, or RAL 7016 anthracite (caps und strain relief)Mounting for twin support: RAL 7035 light greySupport extrusion: aluminium natural anodized


The supports "Floor to Ceiling" are precisely adjusted tomatch room height. Make sure you ask about it!

35

1) 1 U = 32 mm

modul-port

Bench support 10 U1) (320 mm)

The desk adapter is used to accommodate a wide range of different arms. It is mounted to the drilled worktop withthe screws and counter plate supplied.

Comprising: 1 support with tapped strips, cap and cover strip incl.mounting hardware

Finish: RAL 7035 light greyLoad capacity: 20 kg / 44 lbsHow supplied: Pre-assembled, including mounting hardware

Bench support Order number

Bench support TS 6020.1

2)

2) 128 mm = 4 U, clearance for mounting support arm with ITD support panel

2)


Edition 3/2007

36

Mounting kit for horizontal standard runner

To fix the support extrusions: on two standard runners positioned one above the other with the same wall gap

to a standard runner and supply duct (with different wall gap)

to two standard runners positioned one above the other with option of bridgingthe supply duct

Comprising:2 adapters with mounting hardware depending on the version

Finish: RAL 7035 light greyHow supplied: Flat-pack

3

2

1

Mounting kit Order number

Mounting kit 1 TS 6011.1

Mounting kit with one spacer 2 TS 6012.1

Mounting kit with two spacers3 TS 6013.1

1 32

Application:

MOUNTING ACCESSORIES


Edition 3/2007

37

modul-port

Adapter for vertical standard runner

This adapter allows each arm to be mounted to a vertical standard runner with the ITD support panel.

Finish: Aluminium anodizedLoad capacity: 35 kg / 77 lbs How supplied: Pre-assembled, including mounting hardware

Order number

Adapter for vertical standard runner TS 0213.9

100

75

Adapter VESA 100

For matching the VESA 75 flat screen holders to VESA 100

Finish: RAL 7035 light greyScope of supply: 1 adapter incl. mounting hardware

Order number

Adapter VESA 100 TS 6065.1

Mounting kit for support arms on equipment cart

This mounting kit is used to assemble the arms to our equipment carts with the ITD sup-port panel.

Finish: zincedScope of supply: 2 Tapped strips, incl. mounting hardware

Order number

Mounting kit for support arms on equipment cart ZV 9731.9


Edition 3/2007

38

Order number

Support arm TS 6083.1

Order number

Pivot arm - single with support extrusion and standard runners TS 6079.1

Pivot arm - single with support extrusion and standard runners

Comprising:1 pivot arm - single1 support extrusion 30 U1), length 960 mm3 standard runners, Length 390 mm1 EURO socket strip 3-way with ON/OFF switch and 10 A fuse

For mounting on the ITD support extrusion (see page 34).

Finish:RAL 7035 Lichtgrau,support extrusion: natural anodizedLoad capacity:For each standard runner 10 kg /22 lbs How supplied:Pre-assembled, including mountinghardware

Support arm

The support arm profile can be mounted so that the T-slots show up or down.For mounting on the ITD support extrusion (see page 34).Comprising: 1 support arm rigid with cover cap


1) 1 U = 32 mm

EQUIPMENT MOUNTS

See page 37 for adapter for vertical standard runnerEdition 3/2007

39

modul-port

T-support

Used for mounting accessories such as post supports, infusion bottle holders, etc.The arm extrusions can be mounted with T-slots positioned above, below or alternating.For mounting on the ITD support extrusion (see page 34).


Order number

T-support for mounting on the ITD support extrusion TS 6091.1

Post

The post is used for mounting equipment with clamps, e.g. infusion or injection pumps.The post is mounted on the support arm, swivel arm or T-support (variable adjustment).

Post

Post swivel

Finish: RAL 7035 LichtgrauSupport post: aluminium anodized

Load capacity: 10 kg / 22 lbs How supplied: Pre-assembled, including mounting hardware

2

1

Post Order number

L = 128 mm L = 155 mm L = 288 mm

Post1 TS 6096.4 TS 6095.4

Post, swivel2 TS 6092.4 TS 6093.4

1 2



Edition 3/2007

40

Endoscope holder single and double

Endoscope holders are used for safe and kink-free mounting of an endoscope (all common brands).Height adjustment permits endoscopes up to 2 m in length to be mounted. A holder (height adjustable) is used forfixing and for protection.For assembly using 2 rail fasteners to two shelves or to two standard runners

endoscope holder single

endoscope holder double

Material:Support: polypropyleneHolder: polypropylene, fibreglass reinforcedTelescopic bar:Steel chrome-plated, with one-hand operationScope of supply:1 endoscope holder complete with rail fasteners, incl. mounting hardware

2

1

Endoscope holder Order number

single 1 GW 0394.9

double 2 GW 0473.9

1 2

Order number

Vertical holder RS 0130.4

Vertical holder

The vertical holder is used for mounting equipment with clamps, e.g. infusion or injection pumps.The vertical holder is mounted directly to the ITD support extrusion (see page 32).


EQUIPMENT MOUNTS



Edition 3/2007

41

modul-port

Hook strip

To accommodate infusion bottles or bagsFinish:RAL 7035Load capacity:1 kg / 2.2 lbs pro Haken


Hook strip Order number

1 x 61 TS 6106.1

2 x 62 TS 6130.1

1 2

Order number

Infusion bottle holder 1 TS 6105.4

Infusion stand with one-hand adjustment 2 ZV 9997.9

Infusion bottle holder and infusion stand

The infusion bottle holder is fixed to the T-slots of the arm extrusions, e.g. support arm or T-support.

The infusion stand is fixed to standard runners or to two shelves using two rail fasteners.

Finish: Infusion stand and infusion bottle holder: steel chrome-platedSupport post: aluminium natural anodized

Load capacity: 10 kg / 22 lbsHow supplied: Pre-assembled, including mounting hardware

2

1

1 2

See page 37 for adapter for vertical standard runner Edition 3/2007

42

Pump support

The pictures show some of the mounting options available for infusion and injection pumps.The relevant pump type can be matched to the relevant position by mounting the post to the T-slots using the springnut.

Using the swivel pump support the infusion or injection pumps can be positioned at different points or mountedon the wall to save space.


Finish: RAL 7035 light greySupport post: aluminium natural anodized

Load capacity: 35 kg / 77 lbsHow supplied: Partially assembled, including mounting hardware

3

2 1

Other individual configurationscan be set up using the supportarm, T-support and the post.

Pump support Order number

1-unit1 TS 6120.4

3-unit2 TS 6125.4

Swivel 3 TS 6129.4

1 2 3

EQUIPMENT MOUNTS



Edition 3/2007

43

modul-port

Pump support

The dimensions of these pump supports have been designed so that they can accommodate complete infusion systems (e.g. orchestra workstation by Fresenius).


Finish: RAL 7035 light greyPost: aluminium natural anodized

Load capacity: 35 kg / 77 lbsHow supplied: Pre-assembled, including mounting hardware

5 4

Pump support Length Order number

1-unit4 1125 mm TS 6127.4

2-unit5 1125 mm TS 6128.4

4 5



Edition 3/2007

44

Keyboard holder fixed

for mounting directly on the ITD support extrusion (see page 34) or on the extrusions of an equipment cartfor mounting keyboards of max. 372 mm width

Finish: RAL 7035 light grey or Arctic WhiteLoad capacity: 5 kg distributed load / 11 lbsScope of supply: 1 keyboard holder, incl. mounting hardware

Keyboard holder fixed Colour Order number

for Philips applications Arctic White TS 6167.9

for standard keyboards RAL 7035 light grey TS 6147.1

Keyboard holder fixed, with mousepad

For mounting on the support bar D 28 mm - D 38 mm or on vertical or horizontal standard runners.The keyboard holder can be variably adjusted using the anchor and then fixed in the desired position.

Finish: RAL 7035 light greyLoad capacity: 3 kg distributed load/ 6.6 lbsScope of supply: 1 keyboard holder, incl. mounting hardware

Order number

Keyboard holder fixed, with mousepad TS 6220.1

KEYBOARD HOLDER



Edition 3/2007


Order number

1 TS 6222.1

with monitor bracket for VESA 752 TS 6223.1


Order number TS 6225.1Order number TS 6280.1Order number TS 6224.1

Support arm on ITD support extrusionwith pull-out keyboard holder

45

modul-port

horizontal standard runner ITD support extrusion suitable for GCX wall support extrusion

Piv

ot

arm

- d

oub

leP

ivo

t ar

m -

sin

gle

Sup

po

rt a

rm

Keyboard holder

These arms offer the option of positioning the keyboard with mouse in the ergonomically correct working position.

Finish:RAL 7035 light greyLoad capacity:5 kg distributed load / 11 lbsScope of supply: 1 keyboard holder, including mounting hardware

Support arm on GCX wall support extrusion with pull-out keyboard holder

Support arm on horizontal standard runner with pull-out keyboard holder

Pivot arm - single on ITD support extrusion with keyboard holder

Pivot arm - single on GCX wall supportextrusion with keyboard holder

Pivot arm - double on ITD support extrusionwith keyboard holder

1 2

Support arm pull-out in use



Edition 3/2007

46

Shelves

The shelf with continuous raised edges offers your equipment a secure platform. The powder-coated, impact andscratch resistant finish is easy to clean and resistant to disinfectants. Rounded corners protect users from injury. The corners are highlighted in different colours or feature the same colour (see 1)).

Load capacity: 10 kg distributed load / 22 lbsFinish: RAL 7035 light grey, for colour elements see 1)

Scope of supply: 1 shelf, pre-assembled, incl. bracket with mounting hardware

horizontal standard runner ITD support extrusion

Shelf W 360 x D 400, W 400 x D 360 or W 450 x D 491 to ITD supportextrusion

Installation height 96 mm

Shelf W 400 x D 360to horizontalstandard runner


Shelf W 400 x D 360to ITD supportextrusion


Order number MZ 0004.X Order number with mousepad RS 4370.X

1) Trim colour: Make sure you replace .X by .1 = RAL 5021 water blue, .2 = RAL 5013 cobalt blue, .3 = RAL 7035 light grey !

SHELVES


Order number W 360 x D 400 mm RS 4371.XOrder number W 400 x D 360 mm RS 4360.XOrder number W 450 x D 491 mm TS 6276.X

Printer shelf

A cost-effective platform for printersor other large items of equipment.For mounting directly on the ITD support extrusion (see page 34).Finish: RAL 7035 light greyLoad capacity: 10 kg distributed

load / 22 lbsInstallat. height: 96 mm

Order number

Printer shelf, width 450 mm x depth 400 mm TS 6278.1

B T

Edition 3/2007

47

modul-port


Shelves, swivel

The support arms provide the option of turning the shelves (swivel range 158°) .

The swivel arms allow the shelves (swivel range 158°) to be turned and tilted at different points.

Finish: RAL 7035 light grey, for colour elements see 1)

Lieferumfang: 1 shelf, pre-assembled, incl. bracket with mounting hardware

43

21

ITD support extrusion suitable for GCX wall support extrusion

Support arm onITD support extrusion with shelfW 400 x D 360


Support arm onGCX wall-mountingsystemwith shelfW 400 x D 360


Pivot arm - singleon ITD supportextrusionwith shelfW 400 x D 360


Pivot arm - doubleon ITD supportextrusionwith shelfW 400 x D 360


Order number TS 6052.X



Sup

po

rt a

rmP

ivo

t ar

m -

sin

gle

Piv

ot

arm

- d

oub

le



1 2

3

4

Edition 3/2007

horizontal standard runner ITD support extrusion

Block of drawersW 400 x D 360 on horizontal stan-dard runner

Installation height169 mm

Block of drawersW 400 x D 360or W 450 x D 491to ITD supportextrusion


Block of drawers1-unit highW 400 x D 360 to ITD support extrusion


48

Block of drawers

Roller-guided, self-retracting steel guide rails guarantee easy-slide drawers.The lift-out drawer unit makes cleaning the drawers easy. An integrated labelling strip on the front trim gives users anoverview and facilitates fast access. Drawers can also be supplied in a lockable version on request.

Load capacity: Shelf: 10 kg distributed load /22 lbs, Drawer: 3 kg /6.6 lbsFinish: RAL 7035 light grey, for colour elements see 1)

Scope of supply: 1 block of drawers pre-assembled, incl. mounting hardware


DRAWERS


W

D

Order number W 400 x D 360 mm RS 4363.XOrder number W 450 x D 491 mm TS 6279.XOrder number MZ 6001.X

Order number RS 4381.X


Edition 3/2007

Block of drawers for Philips Foot Location, B 450 mm x T 491 mm on standard runner

The equipment feet of the 50XM Series from Philips can be fixed in the detentrails on the shelf.

Load capacity: Shelf 10 kg distributed load / 22 lbsDrawer 3 kg / 6.6 lbs

Finish: Arctic White, Trim elements: Medium Aqua Accent

Scope of supply: 1 block of drawers pre-assembled, incl. mounting hardware

Installation height: 188 mm

49

modul-port

Order number

Block of drawers for Philips Foot Location on standard runner MZ 0006.9

Swivel shelves for Philips Foot Location

The equipment feet of the 50XM Series from Philips can be fixed in the detent rails on the shelf.

Load capacity: Shelf: 10 kg distributed load /22 lbsFinish: Arctic White, trim elements: Medium Aqua Accent Lieferumfang: 1 swivel shelf, pre-assembled, incl. bracket with mounting hardware

horizontal standard runner ITD support extrusion suitable for GCX wall support extrusion

Pivot arm - single with shelfFoot Location W 450 x D 491on horizontal standard runner

Pivot arm - single with shelfFoot Location W 450 x D 491on ITD support extrusion

Pivot arm - single with shelfFoot Location W 450 x D 491on GCX wall-mounting system


Piv

ot

arm

- s

ing

le

Order number TS 6194.9 Order number TS 6195.9


Edition 3/2007

50

Computer holder

For mounting directly on the ITD support extrusion (see page 34)

for computer in the tower enclosureThe relative position of the retainer plates can be adjusted in conformity with the computer height. The two silicone tapes hold the computer securely in position and adapt to the contour.Load capacity: 20 kg / 44 lbs

Finish: RAL 7035 light grey Scope of supply: 1 computer holder, incl. mounting hardware

for Philips IntelliVue MP 90 computerLoad capacity: 10 kg / 22 lbs

Finish: Arctic White Scope of supply: 1 computer holder, incl. mounting hardware

2

1

1 2

Computer holder Order number

Computer holder for tower enclosure 1 TS 6146.1

Computer holder for Philips IntelliVue MP90 2 TS 6166.1

COMPUTER HOLDER



Edition 3/2007

51

modul-port

Standard runner 10 mm x 25 mm

For mounting at the front of the support column directly on the ITD support extrusion (see page 34).

Assembly: In the front T-slotsMaterial: Stainless steel throughout 10 mm x 25 mmLoad capacity: 10 kg / 22 lbsScope of supply: 1 standard runner, with spacer

Order number

Standard runner 10 mm x 25 mm RS 0076.1

Storage basket

Storage basket, for mounting on the standard runnerMesh width: Inside dimension 19 mm or 25 mmMaterial: Steel wireFinish: RAL 9016 White, fluidized-bed coated

Storage basket, for mounting on the ITD support extrusion (see page 34)Mesh width: Inside dimension 19 mm or 25 mmMaterial: Steel wireFinish: RAL 9016 White, fluidized-bed coated

Load capacity:3 kg / 6.6 lbs distributed loadScope of supply: 1 basket, incl. mounting hardware

2

1

Storage basket Order number

on the standard runner 1 ZV 9599.9

on the ITD support extrusion 2 ZV 9967.9

1 2

ACCESSORIES



Edition 3/2007

52

Gas bottle holder

The bottle holder for mounting on the support is used to accommodate gas bottles.The bottle is secured with a tension belt or Velcro tape. The holder can be mounted at any height.


for gas bottles with max. 2 l contentAssembly: Secure with Velcro tapeLoad capacity: 15 kg / 33 lbs

for gas bottles with max. Ø 145 mm, 3 l /5 l /10 l contentAssembly: Secure with tension beltLoad capacity: 35 kg / 77 lbs

for gas bottles with max. Ø 205 mm, 20 l or 50 l contentAssembly: Secure with tension beltLoad capacity: 35 kg / 77 lbs

Finish: RAL 7035 light greyScope of supply: 1 gas bottle holder, complete, incl. mounting hardware

3

2

1

Gas bottle holder Order number

for gas bottles with max. 2 l content 1 GW 0466.1

for gas bottles with 3 l /5 l /10 l content 2 GW 0160.1

for bas bottles with 20 l or 50 l content 3 GW 0285.1

1 2 3

ACCESSORIES


Edition 3/2007

53

modul-port

Jointed arm

Jointed arm with a fixed and a flexible arm, e.g. for cable management, incl. twin ball bearings and joint clamp withknobs.

Working radius: 900 mmMounting pins Ø 16 mm

Finish: Matt chrome-plated, natural anodizedLoad capacity: 1 kg / 2.2 lbsScope of supply: 1 jointed arm with mounting hardware (4 cable carriers)How supplied: Flat-pack

Jointed arm Order number

Jointed arm ZV 9955.9

Rail mounting Ø 16 mm for fixing on standard runner ZV 9876.9

Sample application


Edition 3/2007

54

ACCESSORIES

The socket strips have the following features:

Earthed and EURO socket strips with illuminated switch depending on the version

The socket strips are in conformity with all the relevant DIN, EN and IEC standards.

A robust metal design meets the toughest mechanical requirements.

The sockets strips are inclined at 45°, allowing right-angled plugs to be easily inserted.

The plastic covers are fire-resistant and self-extinguishing in conformity with the UL standard.

The connecting cables for the earthed socket strips end in a minisocket (for connecting external cabling).

Socket strips

Socket strips Standard Order number

EURO socket strip, 3-way with switch 1 IEC 320 ZV 9639.9

Earthed socket strip, 4-way without switch 2 CEE7/III ZV 9669.9

Earthed socket strip, 8-way without switch 3 CEE7/III ZV 9748.9

Earthed socket strip, 3-way with switch 4 CEE7/III ZV 9640.9

41

EURO socket strip

Rated value: 10 A /250 VAC

1 Earthed socket strip3-way


4

2

Earthed socket strip4-way


2

3

Earthed socket strip8-way


3


Edition 3/2007

55

modul-port

Socket strips International Standard

US-standard


1 Swiss standard

Rated value: 10 A / 250 VAC

2 British standard


3 French standard


4

Socket strip International Standard Standard Order number

US standard, 6-way with switch 1 NEMA 15, UL498, CSA ZV 9590.9

Swiss standard, 3-way with switch 2 SEV 1011 ZV 9591.9

British standard, 3-way with switch 3 BS 1363 ZV 9592.9

French standard, 6-way with switch 4 CEE7, UTE ZV 9593.9

31 2 4


Edition 3/2007

56

Strain relief

For fixing incoming and outgoing cable at the side of the ITD support extrusions and at the arm extrusion.Accommodates 2 cables with Ø 8 mm and 2 cables with Ø 5 mm.

Material: ABSScope of supply: 10 units incl. mounting hardwareHow supplied: Flat-pack

Order number

Strain relief TS 6150.1

Cable winder


Finish: RAL 7035 light greyScope of supply: 1 cable winder complete, incl. mounting hardware

Order number

Cable winder TS 0354.1

ACCESSORIES


Edition 3/2007

57

modul-portOrderNumber Page

GW 0160.1 . . . . . . . . 52GW 0285.1 . . . . . . . . 52GW 0394.9 . . . . . . . . 40GW 0466.1 . . . . . . . . 52GW 0473.9 . . . . . . . . 40

MZ 0004.X . . . . . . . . 46MZ 0006.9 . . . . . . . . . 49MZ 6001.X . . . . . . . . . 48MZ 6002.9 . . . . . . . . . 33

RS 0076.1 . . . . . . . . . 51RS 0130.4 . . . . . . . . . 40RS 4360.X . . . . . . . . . 46RS 4363.X . . . . . . . . . 48RS 4370.X . . . . . . . . . 46RS 4371.X . . . . . . . . . 46RS 4380.X . . . . . . . . . 19RS 4381.X . . . . . . . . . 48

TS 0213.9 . . . . . . . . . 37TS 0300.1 . . . . . . . . . 24TS 0303.9 . . . . . . . . . 27TS 0305.9 . . . . . . . . 26TS 0354.1 . . . . . . . . . 56TS 0360.9 . . . . . . . . . 26TS 0400.1 . . . . . . . . . 18TS 6001.1 . . . . . . . . . 34TS 6002.1 . . . . . . . . . 34TS 6003.1 . . . . . . . . . 34TS 6004.1 . . . . . . . . . 34TS 6005.1 . . . . . . . . . 34TS 6006.1 . . . . . . . . . 34TS 6011.1 . . . . . . . . . 36TS 6012.1 . . . . . . . . . 36TS 6013.1 . . . . . . . . . 36TS 6020.1 . . . . . . . . . 35TS 6025.1 . . . . . . . . . 32TS 6031.1 . . . . . . . . . 35TS 6032.1 . . . . . . . . . 35TS 6033.1 . . . . . . . . . 35TS 6035.1 . . . . . . . . . 19TS 6036.1 . . . . . . . . . 19TS 6040.1 . . . . . . . . . 34TS 6041.1 . . . . . . . . . 34TS 6042.1 . . . . . . . . . 34TS 6043.1 . . . . . . . . . 34TS 6044.1 . . . . . . . . . 34TS 6045.1 . . . . . . . . . 34TS 6050.X . . . . . . . . . 47TS 6052.X . . . . . . . . . 47TS 6055.X . . . . . . . . . 47TS 6065.1 . . . . . . . . . 37TS 6079.1 . . . . . . . . . 38

TS 6083.1 . . . . . . . . . 38TS 6091.1 . . . . . . . . . 39TS 6092.4 . . . . . . . . . 39TS 6093.4 . . . . . . . . . 39TS 6095.4 . . . . . . . . . 39TS 6096.4 . . . . . . . . . 39TS 6105.4 . . . . . . . . . 41TS 6106.1 . . . . . . . . . 41TS 6120.4 . . . . . . . . . 42TS 6125.4 . . . . . . . . . 42TS 6127.4 . . . . . . . . . 43TS 6128.4 . . . . . . . . . 43TS 6129.4 . . . . . . . . . 42TS 6130.1 . . . . . . . . . 41TS 6146.1 . . . . . . . . . 50TS 6147.1 . . . . . . . . . 44TS 6150.1 . . . . . . . . . 56TS 6157.4 . . . . . . . . . 32TS 6166.1 . . . . . . . . . 50TS 6167.9 . . . . . . . . . 44TS 6180.9 . . . . . . . . . 49TS 6194.9 . . . . . . . . . 49TS 6195.9 . . . . . . . . . 49TS 6210.1 . . . . . . . . . 23TS 6211.1 . . . . . . . . . 23TS 6212.1 . . . . . . . . . 23TS 6213.1 . . . . . . . . . 23TS 6214.1 . . . . . . . . . 23TS 6216.1 . . . . . . . . . 23TS 6217.1 . . . . . . . . . 23TS 6220.1 . . . . . . . . . 44TS 6221.1 . . . . . . . . . 45TS 6222.1 . . . . . . . . . 45TS 6223.1 . . . . . . . . . 45TS 6224.1 . . . . . . . . . 45TS 6225.1 . . . . . . . . . 45TS 6226.1 . . . . . . . . . 45TS 6248.1 . . . . . . . . . 29TS 6249.1 . . . . . . . . . 29TS 6250.1 . . . . . . . . . 29TS 6251.1 . . . . . . . . . 29TS 6252.1 . . . . . . . . . 29TS 6253.1 . . . . . . . . . 29TS 6254.1 . . . . . . . . . 29TS 6255.1 . . . . . . . . . 29TS 6259.4 . . . . . . . . . 21TS 6260.4 . . . . . . . . . 21TS 6261.4 . . . . . . . . . 21TS 6263.4 . . . . . . . . . 21TS 6265.4 . . . . . . . . . 21TS 6268.4 . . . . . . . . . 31TS 6269.4 . . . . . . . . . 31TS 6270.4 . . . . . . . . . 31TS 6271.4 . . . . . . . . . 31

TS 6272.4 . . . . . . . . . 31TS 6273.4 . . . . . . . . . 31TS 6274.4 . . . . . . . . . 31TS 6275.4 . . . . . . . . . 31TS 6276.X . . . . . . . . . 46TS 6277.X . . . . . . . . . 47TS 6278.1 . . . . . . . . . 46TS 6279.X . . . . . . . . . 48TS 6280.1 . . . . . . . . . 45TS 6300.1 . . . . . . . . . 16TS 6310.1 . . . . . . . . . 16TS 6313.1 . . . . . . . . . 17TS 6314.1 . . . . . . . . . 17TS 6315.1 . . . . . . . . . 17TS 6316.1 . . . . . . . . . 17TS 6317.1 . . . . . . . . . 17TS 6318.1 . . . . . . . . . 17TS 6319.1 . . . . . . . . . 17TS 6320.1 . . . . . . . . . 17TS 6321.1 . . . . . . . . . 17TS 9013.1 . . . . . . . . . 25

TS 9013.1 + TS 0288.9 . . . . . . . . . 25

TS 9013.1 + TS 0298.1 . . . . . . . . . 25

TS 9014.1 . . . . . . . . . 25

TS 9014.1 + TS 0288.9 . . . . . . . . . 25

TS 9014.1 + TS 0298.1 . . . . . . . . . 25

TS 9015.1 . . . . . . . . . 25

TS 9015.1 + TS 0288.9 . . . . . . . . . 25

TS 9015.1 +TS 0298.1 . . . . . . . . . 25

TS 9016.1 . . . . . . . . . 25

TS 9016.1 + TS 0288.9 . . . . . . . . . 25

TS 9016.1 + TS 0298.1 . . . . . . . . . 25

TS 9017.1 . . . . . . . . . 25

TS 9017.1 +TS 0288.9 . . . . . . . . . 25

TS 9017.1 +TS 0298.1 . . . . . . . . . 25

TS 9018.1 . . . . . . . . . 25

TS 9018.1 + TS 0288.9 . . . . . . . . . 25

TS 9018.1 + TS 0298.1 . . . . . . . . . 25

ORDER NUMBER INDEX

TS 9019.1 . . . . . . . . . 25

TS 9019.1 + TS 0288.9 . . . . . . . . . 25

TS 9019.1 +TS 0298.1 . . . . . . . . . 25

TS 9020.1 . . . . . . . . . 25

TS 9020.1 + TS 0288.9 . . . . . . . . . 25

TS 9020.1 + TS 0298.1 . . . . . . . . . 25

TS 9021.1 . . . . . . . . . 33

TS 9021.1 + TS 0288.9 . . . . . . . . . 33

TS 9021.1 + TS 0298.1 . . . . . . . . . 33

ZV 9531.9 . . . . . . . . . 23ZV 9532.9 . . . . . . . . . 23ZV 9533.9 . . . . . . . . . 23ZV 9538.9 . . . . . . . . . 17ZV 9539.9 . . . . . . . . . 17ZV 9540.9 . . . . . . . . . 17ZV 9541.9 . . . . . . . . . 17ZV 9590.9 . . . . . . . . . 55ZV 9591.9 . . . . . . . . . 55ZV 9592.9 . . . . . . . . . 55ZV 9593.9 . . . . . . . . . 55ZV 9599.9 . . . . . . . . . 51ZV 9625.1 . . . . . . . . . 29ZV 9627.1 . . . . . . . . . 29ZV 9629.1 . . . . . . . . . 29ZV 9639.9 . . . . . . . . . 54ZV 9640.9 . . . . . . . . . 54ZV 9669.9 . . . . . . . . . 54ZV 9682.1 . . . . . . . . . 31ZV 9684.1 . . . . . . . . . 31ZV 9686.1 . . . . . . . . . 31ZV 9688.1 . . . . . . . . . 21ZV 9690.1 . . . . . . . . . 21ZV 9692.1 . . . . . . . . . 21ZV 9731.9 . . . . . . . . . 37ZV 9748.9 . . . . . . . . . 54ZV 9876.9 . . . . . . . . . 53ZV 9955.9 . . . . . . . . . 53ZV 9967.9 . . . . . . . . . 51ZV 9997.9 . . . . . . . . . 41


Edition 3/2007

58

KEYWORD INDEX

A Page

Adapter for direct mounting for flat screens . . . . . . 16Adapter for vertical standard runner . . . . . . . . . . . . 37Adapter plate for GE Critikon Pro 100 . . . . . . . . . . . 26Adapter plate for GE Dash 4000 . . . . . . . . . . . . . . . 27Adapter plate for Schiller Argus LC . . . . . . . . . . . . . 26Adapter VESA 100 . . . . . . . . . . . . . . . . . . . . . . . . . 37

B Page

Bed mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Bench support . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Block of drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Block of drawers for Philips Foot Location . . . . . . . 49

C Page

Cable winder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Carrier with Quickmount Adapter

for Philips IntelliVue MP20 - MP50 . . . . . . . . . 28for Philips IntelliVue IntelliVue MP60/MP70 . . . . 30

Carrier for Philips IntelliVue MP90 with VESA 75 / VESA 100 adapter with posts . 20

Carrier for monitors with universal adapters . . . . . . 22Carrier for Nihon Kohden Life Scope monitors . . . . 24Computer holder . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

D Page

Desk adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

E Page

Earthed socket strip . . . . . . . . . . . . . . . . . . . . . . . . 54Endoscope holder . . . . . . . . . . . . . . . . . . . . . . . . . . 40Equipment mounts . . . . . . . . . . . . . . . . . . . . . . . . . 38EURO socket strip . . . . . . . . . . . . . . . . . . . . . . . . . 54

G Page

Gas bottle holder . . . . . . . . . . . . . . . . . . . . . . . . . . 52

H Page

Height adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . 19Holder for CO2 unit Nihon Kohden . . . . . . . . . . . . . 24Hook strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

I Page

Infusion bottle holder . . . . . . . . . . . . . . . . . . . . . . . . 41Infusion stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41ITD- Support extrusion . . . . . . . . . . . . . . . . . . . . . . 34

J Page

Jointed arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

K Page

Keyboard holder . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

M Page

Monitor bracket for flat screens with VESA 75 / VESA 100 Adapter . . . . . . . . . 18

Mounting kit for horizontal standard runner . . . . . . . 36Mounting kit for support arms on equipment cart . . 37

P Page

Pivot arm – double with keyboard holder . . . . . . . . . . . . . . . . . . . . 45with monitor bracket for flat screens . . . . . . . . 17with shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47with swivel and tilt unit inclusiveuniversal adapter plate . . . . . . . . . . . . . . . . . . . 23


Edition 3/2007

59

modul-portPivot arm – single

with keyboard holder . . . . . . . . . . . . . . . . . . . . 45with monitor bracket for flat screens . . . . . . . . 17with shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47with support extrusion and standard runners . . 38

Pivot arm – single with swivel and tilt unit for Philips IntelliVue MP20 – MP50 . . . . . . . . . . 29for Philips IntelliVue MP60/MP70 . . . . . . . . . . . 31for Philips IntelliVue MP90 . . . . . . . . . . . . . . . . 21incl. universal adapter plate . . . . . . . . . . . . . . . 23

Post . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Printer shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Pump support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

R Page

Rail mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

S Page

Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Socket strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Standard runner . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Storage basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Strain relief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Support arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Support arm with keyboard holder . . . . . . . . . . . . . 45Support arm with monitor bracket for flat screens . 17Support arm with shelf . . . . . . . . . . . . . . . . . . . . . . 47Support arm with swivel and tilt unit

for Philips IntelliVue MP20 – MP50 . . . . . . . . . . 29for Philips IntelliVue MP60/MP70 . . . . . . . . . . . 31for Philips IntelliVue MP90 . . . . . . . . . . . . . . . . 21incl. universal adapter plate . . . . . . . . . . . . . . . 23

Support extrusion . . . . . . . . . . . . . . . . . . . . . . . . . . 34Supports for flat screens with VESA 75 / VESA 100adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Swivel shelves for Philips Foot Location . . . . . . . . . 49

T Page

T-support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Twin support extrusion . . . . . . . . . . . . . . . . . . . . . . 35

V Page

Variable height arm with monitor bracket for flat screens . . . . . . . . . . . . . . . . . . . . . . . . . 17

Variable height arm with swivel and tilt unit for Philips IntelliVue MP20 – MP50 . . . . . . . . . . 29for Philips IntelliVue MP60/MP70 . . . . . . . . . . . 31for Philips IntelliVue MP90 . . . . . . . . . . . . . . . . 21incl. universal adapter plate MP90 . . . . . . . . . . 23

Vertical holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40


Edition 3/2007

60

ALL THE INFORMATIONTO KEEP YOU UPDATED

ChinaVACT Vinck's Agency for Consulting and Trading309, Dongfang Building9, Yuan Dong Road RC210044 NanjingTel.: +86 25-7051395Fax: +86 25-7051395e-mail: [email protected]

Great BritainOR Networks Limited1, 2 UnitHillcrest Park, Hoyle RoadNG14 6QJ NottinghamshireCalvertonTel.: +44-115-965-5577Fax: +44-115-965-5522e-mail: [email protected]

JapanCEC Chuo Electronics Co. Ltd.Daiichi-Seimei Bldg. 7F3-20-6 Myojin-cho, Hachioji-shiJ-192-0046 Tokyo Tel.: +81-426-56-5911Fax: +81-426-56-5808e-mail: [email protected]

NetherlandsAlphatron Medical & Microwave Systems BVSchaardijk 23NL-3001 NH Rotterdam-Haven Tel.: +31-10-453 4000Fax: +31-10-453 4001e-mail: [email protected]

All up to dateClick on our website. You can always find the latest information

and product innovations there. There are also downloadoptions for catalogues and planning tools.

www.itd-cart.com

All live If you want to see our equipment carriers for yourself, visit our show-room in Unterhaching. Or would youprefer to have an on-site visit? Oursales advisers will be pleased to payyou a visit. Whichever option youchoose, we ask you to give us a callto fix up an appointment.

If you are a customer abroad, ourbranches and agents are at your service. The addresses are givenbelow.

Agencies abroad

ItaliyN.O.R.I.S. SRLPiazza Alpini d´Italia43010 Ponte Taro (Parma)Tel.: +39-0521-656915Fax: +39-0521-616071e-mail: [email protected]

BelgiumBelintra n.v. Aalbroekstraat 39890 Semmerzake (Gavere)Tel.: +32-9-243 10 13Fax: +32-9-243 10 19e-mail: [email protected]

Edition 3/2007

seek and find! modul-port table of contents filemodul-port 1 seek and find! table of contents the...

Documents