send from designer epic™ & brilliance™ 80:...

5
1 PREMIER+™ 2 Embroidery System Send from Designer Epic™ & Brilliance™ 80: Mac Send from Designer Epic™ & Brilliance™ 80: Mac Configuring your Software and Embroidery Machine 1 Enter your mySewnet™ details in the Connection tab of PREMIER+™ 2 Configure. You can also name your computer in the Connection tab. 2 Ensure that PREMIER+™ 2 Machine is running in the menu bar. 3 Go the the embroidery machine. 4 At the embroidery machine, tap the Cloud button at the top and ensure that you are signed in to mySewnet™.

Upload: others

Post on 04-Dec-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Send from Designer Epic™ & Brilliance™ 80: Macemnetsoftware2.co.uk/Education/PremierPlus2/SendFrom...The Send Design button is not available if nothing is selected. PREMIER+™

1 PREMIER+™ 2 Embroidery System Send from Designer Epic™ & Brilliance™ 80: Mac

Send from Designer Epic™ & Brilliance™ 80: Mac

Configuring your Software and Embroidery Machine1 Enter your mySewnet™ details in the

Connection tab of PREMIER+™ 2 Configure.You can also name your computer in the Connection tab.

2 Ensure that PREMIER+™ 2 Machine is running in the menu bar.

3 Go the the embroidery machine.

4 At the embroidery machine, tap the Cloud button at the top and ensure that you are signed in to mySewnet™.

Page 2: Send from Designer Epic™ & Brilliance™ 80: Macemnetsoftware2.co.uk/Education/PremierPlus2/SendFrom...The Send Design button is not available if nothing is selected. PREMIER+™

PREMIER+™ 2 Embroidery System Send from Designer Epic™ & Brilliance™ 80: Mac 2

5 Deselect JoyOS advisor ™ , then select Settings and Machine Settings.

6 In Machine Settings, give your machine a Nickname.

7 Close Settings.

Page 3: Send from Designer Epic™ & Brilliance™ 80: Macemnetsoftware2.co.uk/Education/PremierPlus2/SendFrom...The Send Design button is not available if nothing is selected. PREMIER+™

3 PREMIER+™ 2 Embroidery System Send from Designer Epic™ & Brilliance™ 80: Mac

Sending to and from an Embroidery Machine1 If needed, deselect JoyOS advisor ™ .2 Tap Embroidery mode , and then load an embroidery.

3 In the machine screen, choose the Send Design option.

Note: The machine will send only the selected design. Ensure that your design is selected.The Send Design button is not available if nothing is selected.

Page 4: Send from Designer Epic™ & Brilliance™ 80: Macemnetsoftware2.co.uk/Education/PremierPlus2/SendFrom...The Send Design button is not available if nothing is selected. PREMIER+™

PREMIER+™ 2 Embroidery System Send from Designer Epic™ & Brilliance™ 80: Mac 4

4 Select the computer to send to, then send the embroidery.The embroidery will open in a new PREMIER+™ 2 Embroidery window.

5 When you have adjusted the embroidery, save the changes to your computer.

Note: You can also use PREMIER+™ 2 Modify to adjust and send embroideries to your machine.

Page 5: Send from Designer Epic™ & Brilliance™ 80: Macemnetsoftware2.co.uk/Education/PremierPlus2/SendFrom...The Send Design button is not available if nothing is selected. PREMIER+™

5 PREMIER+™ 2 Embroidery System Send from Designer Epic™ & Brilliance™ 80: Mac

6 You can then use Send to Machine via mySewnet™ to return the edited embroidery to your machine for stitching out.

Note: All designs within the hoop on the computer screen will be sent.If the machine is still open from when you sent the embroidery, the new version will be placed on the screen with the original.

Documentation correct as of November 2018:

■ PREMIER+™ 2 Embroidery - version 12.3■ HV Designer Epic™ - version Release - 304■ HV Designer Brilliance™ 80 - version Release - 65

VIKING and PREMIER+ are trademarks of Singer Sourcing Limited LLC. All trademarks are used under license of SingerSourcing Limited LLC.. © 2018 Singer Sourcing Limited LLC. All rights reserved.