series belt conveyor - mysilo
TRANSCRIPT
* Measurement in mm. * The product Density m3/s. * The values in the table are approximate. * The product density is considered for to be 769 kg/m3 metric ton calculation. * Maxporter has the right to change specifications.
V SERIES BELT CONVEYOR
V S
ERIE
S BE
LT C
ON
VEY
OR
TECHNICAL INFORMATION
K SERIES BELT CONVEYOR CAPACITY CHART
MODEL BELT WIDTH A B C D E
V SERIES BELT CONVEYOR MEASUREMENTS
MYSILO GRAIN STORAGE SYSTEMS INC. CO.Erenler OSB Mah. Recep Tayyip Erdoğan Blv. No : 30 Aksaray / [email protected] www.mysilo.comT : +90(382) 266 22 45 F : +90(382) 266 22 52
BC-2003
BVK - 30
BVK - 40
BVK - 45
300
400
450
322
422
480
260
260
300
1100
1100
1100
3000
3000
3000
1050
1050
1050
MODEL
BKV-30
BKV-40
BKV-45
BELT WIDTH (mm)
450
600
750
UNITBELT SPEED ( m / sn )
0,5
10
20
26
m3/h
m3/h
m3/h
8
15
20
t/h
t/h
t/h
1
20
39
52
15
30
40
1,5
29
59
78
22
45
60
V SERIES BELT CONVEYOR
Our Maxporter V Series Belt Conveyors have a specially designed closed body structure. It is an economical model for low capacities and short distances with its ability to work in outdoor conditions. It is manufactured from galvanized steel. In this way, it is long-lasting against environmental factors. Our belts with anti-static properties are resistant to fire risks of dust explosion. It operates at an optimum efficiency of a maximum length of 30 meters and a belt speed of 1 meter / second. Usage area of V Model Belt Conveyor; It is preferred when products such as seeds, nuts, legumes are not desired to break, crush and mixed with each other. Our Maxporter Belt Conveyors are environmentally friendly and comply with occupational health and safety regulations. It has CE certification.
3
7
Maxporter A model Belt Conveyors are driven by coupled helical conic gear reduc-er. Since the reducer is connected directly to the drum shaft, and there is no back transmission element and the power losses are less. It provides high momentum.
Maxporter K model Belt Conveyors are driven by shaft mounted helical reductor with belt pulley connection. Since different pulleys can be used in different diam- eters; different speeds and capacities can be obtained. This option makes the technical service process easier.
K MODEL HEAD SECTION
A MODEL HEAD SECTION
2
3
4
5
7
8
9
10
12
13
2
4 13
11
12
9
8
5
1
10
11
1
15
14
14
15
6
6
Stretching Mechanism
Speed Sensor (Optional)
Inlet Hopper
A Model Head Section (Optional)
UCF Type Bearing
Anti Stucking Sensor
Reducer
K Model Head Section
Output Chamber
Polyethylene Coating - UHMW (Optional)
Motor 380 V 50 Hz IP 55
Motor Protection Cover
Pulley Protection Cover
Anti - Static Belt
Rotation Roller