series high speed vertical machining center · to fulfill machining requirements of high speed and...
TRANSCRIPT
LSeries
High SpeedVertical Machining Center
YIH CHUAN MACHINERY INDUSTRY CO., LTD
YIH CHUAN MACHINERY ( JIAXING ) INDUSTRY CO., LTDCHINA BRANCH
HEAD QUARTERS40755 No.8, 9th Rd., Taichung Industrial Park, Taichung, TaiwanTEL : +886-4-2359-3351FAX : +886-4-2359-0012E-mail : [email protected]
4314031 No.3198, Zhongshan West Rd., Xiuzhou Industrial Area, Jiaxing, Zhejiang TEL : +86-573-8279-9488FAX : +86-573-8279-7299E-mail : [email protected] EXTRONCNC.com
Copyright © EXTRON All rights reservedE-L-EN-201811
LSeries
High SpeedVertical Machining Center
1
3 axes adopt high speed and high precision linear guide ways design to fulfill machining requirements of high speed and high precision which is very suitable for dies & molds, aerospace, automobile and medical industries.
High speed 20,000 rpm direct drive spindle is available for option to provide full power output from spindle motor with no backlash to ensure high quality and high accuracy of surface finish.
CNC tilting rotary table is available for option to provide machining application of complicated angular cutting.
Powerful coolant nozzles around spindle featured with high pressure flush coolant design ensure smooth machining processes and outstanding machining accuracy.
LSerieS
With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers. We're always looking for solutions to improve our products and give you the better quality, reliable machines and service.
2
L660 / L800 / LU-85 / L860 / L1060 / L1165 / L1200 / L1320
HIGH SPEEDVERTICAL MACHINING CENTER
The L series features high speed linear guide ways and high speed spindle with rigid casting body and fast ATC system to achieve high e�ciency and excellent accuracy. Along with design di�erentiation and high CP value, the L series ful�ll various machining needs from now and future.
3
One-piece wide bed structure with linear guide ways and heavy load ball screws eliminate over-hanging issue of working table to ensure optimal solid support.
C3 class ball screw with double nuts ensure optimal accuracy and long-lasting. Besides, pre-tension on all axes eliminates thermal deformation to ensure outstanding machining accuracy.
3 axes are adopted with direct drive AC servo motors to ensure great heavy load ability, high dynamic precision and fast acceleration / deceleration.
SerieS
Rapid Axial System
L
36 / 36 / 30 m/minX / Y / Z axes rapid feed rate
10 / 10 / 10 m/minX / Y / Z cutting feed rate
The Finite Element Analysis ( FEA ) is used on all castings to ensure high rigid structure and minimize deformation.
The Meehanite casting structure and A-shaped column design provide solid support to e�eiciently enhance structure rigidity.
The massive structure of bed, column, and table are all adopted with specialized enforced cross ribs that offer the best stability and precision for constantly machining.
Wide span of column with enforced cross ribs make sure no shake occurrence on head stock while high speed moving to provide outstanding machining rigidity and stability.
4
SUPER RIGID STRUCTURE L660 / L800 / LU-85 / L860
/ L1060 / L1165 / L1200 / L1320
5
Depend on machining characteristics, gear drive system provides high torque machining, or high speed direct drive system is also available to provide superb accuracy speci�cially aimed at die & mold machining.
High speed 20,000 rpm direct drive spindle provides high machining accuracy to reduce vibration and noise transmission as well as isolate heat from motor. ( Option L1060 / L1165 )
Equipped 2-step German made ZF gear box provides high torque & heavy cutting capability at low rpm. ( Option L1060 / L1320 )
Spindle frame is adopted enforced steel alloy and 3 sets of bearings. Spindle motor runs through dynamic balancing to ensure tolerance beyond G0.4 high accuracy balancing in compliance with ISO 1940 standard while ensuring spindle run-out less than 0.003mm.
Constant OutputConstant Torque
2,0000 4,000 6,000
6
12
1818.5
15
24
70
80
95
120
160
Torque[ N-m ]
Output
18.5 kW ( 30 min. )
Torque ( 30 min. )
Torque ( cont. )
15 kW ( cont. )
[ kW ]
1,500
FANUC α15i
BT 50 6,000 rpm Belt drive Spindle
5
10
15
20
30
60
70
95
90
120
Torque[ N-m ]
Output
15 kW ( 30 min. )
Torque ( 30 min. )Torque ( cont. )
Constant OutputConstant Torque
11 kW ( cont. )
[ kW ]
1,500
FANUC α12i
2,000 4,0000 6,000 8,000
BT 40 8,000 rpm Belt drive Spindle
定格馬力定格扭矩
2,0000 4,000 6,000
6
12
1818.5
15
24
125
250
380375
480500
扭矩[ N-m ]
輸出功率
18.5 kW ( 30 分鐘 )
扭矩 ( 30 分鐘 )
扭矩 ( 連續 )
15 kW ( 連續 )
[ kW ]
1,500375
FANUC α15i
HL
BT 50 6,000 rpm ZF齒輪
5
7.5
5.5
10
15
20
100
200
280
380
300
400
扭矩[ N-m ]
輸出功率
15 kW ( 30 分鐘 )
扭矩 ( 30 分鐘 )
扭矩 ( 連續 )
定格馬力定格扭矩
11 kW ( 連續 )
[ kW ]
1,500375
FANUC α12i
2,000 4,0000 6,000 8,000
HL
BT 40 8,000 rpm ZF齒輪
3
6
9
12
15
30
35
4845
60
Torque[ N-m ]
Output
7.5 kW ( 30 min. )
Torque ( 30 min. )Torque ( cont. )
Constant Torque Constant Output
5.5 kW ( cont. )
[ kW ]
2,000
1,500
0 4,000 6,000 8,000
FANUC α6i
BT 40 8,000 rpm Belt drive Spindle
4
8
12
5.5
3.7
16
20
40
48
70
60
80
Torque[ N-m ]
Output
11 kW ( 30 min. )
Torque ( 30 min. )
Torque ( cont. )
Constant Torque Constant Output
7.5 kW ( cont. )
[ kW ]
2,000
1,500
0 4,000 6,000 8,000
FANUC α8i
BT 40 8,000 rpm Belt drive Spindle
Constant OutputConstant Torque
Constant OutputConstant Torque
Constant OutputConstant Torque
Constant OutputConstant Torque
3
6
7.5
9
11
12
20
40
48
70
60
80
Torque[ N-m ]
Output[ kW ]
1,000 2,0000 3,000 4,000
11 kW ( 30 min. )
Torque ( 30 min. )
Torque ( cont. )
7.5 kW ( cont. )
1,500
3
6
7.5
9
11
12
10
20
28
19
30
40
Torque[ N-m ]
Output[ kW ]
3,750 7,5000 15,00011,250
11 kW ( 30 min. )
Torque ( 30 min. )
Torque ( cont. )
7.5 kW ( cont. )
4,000
FANUC α8i TLow speed
FANUC α8i THigh speed
15,000 rpm Direct drive Spindle BT 40
95
70
[ N-m ] [ kW ]
1,000 2,0000 3,000 4,000
15 kW ( 30 min. )
11 kW ( cont. )
1,500
35
25
28.6
35.3
45
55
[ N-m ]Output
[ kW ]
5,000 10,0000
12
6
18
24
20,00015,000
FANUC α8i Low speed
FANUC α8i High speed
20,000 rpm Direct drive Spindle BT 40
40
80
120
160
6
0
12
18
24
15 kW ( cont. )
18.5 kW ( 30 min. )
TorqueOutputTorque
Torque ( 30 min. )
Torque ( cont. )
Torque ( 30 min. )
Torque ( cont. )
Spindle chi l ler i s s tandard for a l l ser ies to el iminate thermal d e fo r m a t i o n a n d e n s u re h i g h accuracy and service life.
Unique Spindle System
Direct drive spindle
6
Constant OutputConstant Torque
2,0000 4,000 6,000
6
12
1818.5
15
24
70
80
95
120
160
Torque[ N-m ]
Output
18.5 kW ( 30 min. )
Torque ( 30 min. )
Torque ( cont. )
15 kW ( cont. )
[ kW ]
1,500
FANUC α15i
BT 50 6,000 rpm Belt drive Spindle
5
10
15
20
30
60
70
95
90
120
Torque[ N-m ]
Output
15 kW ( 30 min. )
Torque ( 30 min. )Torque ( cont. )
Constant OutputConstant Torque
11 kW ( cont. )
[ kW ]
1,500
FANUC α12i
2,000 4,0000 6,000 8,000
BT 40 8,000 rpm Belt drive Spindle
定格馬力定格扭矩
2,0000 4,000 6,000
6
12
1818.5
15
24
125
250
380375
480500
扭矩[ N-m ]
輸出功率
18.5 kW ( 30 分鐘 )
扭矩 ( 30 分鐘 )
扭矩 ( 連續 )
15 kW ( 連續 )
[ kW ]
1,500375
FANUC α15i
HL
BT 50 6,000 rpm ZF齒輪
5
7.5
5.5
10
15
20
100
200
280
380
300
400
扭矩[ N-m ]
輸出功率
15 kW ( 30 分鐘 )
扭矩 ( 30 分鐘 )
扭矩 ( 連續 )
定格馬力定格扭矩
11 kW ( 連續 )
[ kW ]
1,500375
FANUC α12i
2,000 4,0000 6,000 8,000
HL
BT 40 8,000 rpm ZF齒輪
3
6
9
12
15
30
35
4845
60
Torque[ N-m ]
Output
7.5 kW ( 30 min. )
Torque ( 30 min. )Torque ( cont. )
Constant Torque Constant Output
5.5 kW ( cont. )
[ kW ]
2,000
1,500
0 4,000 6,000 8,000
FANUC α6i
BT 40 8,000 rpm Belt drive Spindle
4
8
12
5.5
3.7
16
20
40
48
70
60
80
Torque[ N-m ]
Output
11 kW ( 30 min. )
Torque ( 30 min. )
Torque ( cont. )
Constant Torque Constant Output
7.5 kW ( cont. )
[ kW ]
2,000
1,500
0 4,000 6,000 8,000
FANUC α8i
BT 40 8,000 rpm Belt drive Spindle
Constant OutputConstant Torque
Constant OutputConstant Torque
Constant OutputConstant Torque
Constant OutputConstant Torque
3
6
7.5
9
11
12
20
40
48
70
60
80
Torque[ N-m ]
Output[ kW ]
1,000 2,0000 3,000 4,000
11 kW ( 30 min. )
Torque ( 30 min. )
Torque ( cont. )
7.5 kW ( cont. )
1,500
3
6
7.5
9
11
12
10
20
28
19
30
40
Torque[ N-m ]
Output[ kW ]
3,750 7,5000 15,00011,250
11 kW ( 30 min. )
Torque ( 30 min. )
Torque ( cont. )
7.5 kW ( cont. )
4,000
FANUC α8i TLow speed
FANUC α8i THigh speed
15,000 rpm Direct drive Spindle BT 40
95
70
[ N-m ] [ kW ]
1,000 2,0000 3,000 4,000
15 kW ( 30 min. )
11 kW ( cont. )
1,500
35
25
28.6
35.3
45
55
[ N-m ]Output
[ kW ]
5,000 10,0000
12
6
18
24
20,00015,000
FANUC α8i Low speed
FANUC α8i High speed
20,000 rpm Direct drive Spindle BT 40
40
80
120
160
6
0
12
18
24
15 kW ( cont. )
18.5 kW ( 30 min. )
TorqueOutputTorque
Torque ( 30 min. )
Torque ( cont. )
Torque ( 30 min. )
Torque ( cont. )
Belt drive system Direct drive system Gear drive system
7
Side exit type
High pressure chips �ush coolant
Screw type chip auger x 1 ( Below L1060 )
Screw type chip auger x 2 ( L1165 )
High E�cieny Chips Removal
8
Caterpillar type chip conveyor
OptionSide exit type
9
High Reliable ATC System
( 20T Carousel Type Magazine )
Magazine L660 L800 LU-85 L860 L1060 L1165 L1200 L1320
16 T Carousel Type ● ● — — — ○ ○ —
20 T Carousel Type ○ ○ — — — ○ ○ —
24 T Arm Type ○ ○ ● ● ● ● ● ●
30 T Arm Type ○ ○ ○ ○ ○ — — ○
36 T Arm Type — — ○ ○ ○ — — —
40 T Chain Type — — — — — — — ○
Standard ● Optional ○ N/A —
All machines must pass the test of long-term tool
change reliability before shipment to achieve
high efficiency and high stability during tool
change.
Various options of tool magazine configurations
a re ava i l a b l e by m a c h i n e m o d e l s to m e e t
different machining needs.
10
HMI system
iPanel Intelligent Assistant System
Coordinate Setup
Peripheral Equipments
System Setting
Diagnostic Functions
Calculator Type
MAG Management
Process Parameters
Contact Information
SP Thermal Compensation
Load Management
Workpiece Measurement
Machining Program
Manual Documents
Time Based Maintenance
Remote Functions
T Length Measurement
Process Counter
All-purpose functions to make work easier, fast and safe.
A GREAT HELPER TO IMPROVE YOUR MACHINING EFFICIENCY
IAS
Machine Layout & Dimensions
CAT40
GAUGE DIA.TAPER 7/24
84.516.268.3
16.1
11.13.3
Ø 6
3.5
Ø 7
.3Ø
12.
9Ø
19.
1
90˚
60˚
Ø 4
4.45
BT4065.4 ± 0.2
16.6 ± 0.1
35
35-0.125
Ø 1
0-0.
1
6010 ± 0.1
Ø 1
5-0.
1 45˚
2 ± 0.4
Ø 6
3Ø
53
30˚ 30˚GAUGE DIA.
28-0.1
TAPER 7/24
4
3
60˚
Ø 4
4.45
M16
CAT50
GAUGE DIA.TAPER 7/24
101.8
Ø 6
9.8
19.111.2
3.3
Ø 9
8.3
60˚
Ø 1
6.8
Ø 2
2.8
44.9
34.8
BT50 35
3 ± 0.4
101.8 ± 0.215 ± 0.1
23.2 ± 0.1
Ø 1
00 -
0.05
45 - 0.1
Ø 6
9.85
M24
40
85
Ø 2
3 - 0
.1
35 - 0.1
5
5
60°
25.1
Ø 8
5
Ø 1
7 - 0
.1
GAUGE DIA.
TAPER 7/24
30° 30°
45˚
146.8
( Unit : mm )
Tool Shank and Pull Stud Dimensions
Table Dimensions T-slot Dimensions ( Unit : mm )
ADC
C
C
C
B
18H9
32
12
29
AB
J
K
I
H
G
DC
E F
18H9
30
12
36
11
Model A B C D
L660 760 456 110 58
L800 900 456 120 48
LU-85 932 502 130 56
L860 932 502 130 56
L1060 1,258 510 100 55
L1165 1,120 660 110 110
L1200 1,300 600 120 60
L1320 1,520 700 145 60
Dimensions
( For L1165 )
Machine Layout & Dimensions
CAT40
GAUGE DIA.TAPER 7/24
84.516.268.3
16.1
11.13.3
Ø 6
3.5
Ø 7
.3Ø
12.
9Ø
19.
1
90˚
60˚
Ø 4
4.45
BT4065.4 ± 0.2
16.6 ± 0.1
35
35-0.125
Ø 1
0-0.
1
6010 ± 0.1
Ø 1
5-0.
1 45˚
2 ± 0.4
Ø 6
3Ø
53
30˚ 30˚GAUGE DIA.
28-0.1
TAPER 7/24
4
3
60˚
Ø 4
4.45
M16
CAT50
GAUGE DIA.TAPER 7/24
101.8
Ø 6
9.8
19.111.2
3.3
Ø 9
8.3
60˚
Ø 1
6.8
Ø 2
2.8
44.9
34.8
BT50 35
3 ± 0.4
101.8 ± 0.215 ± 0.1
23.2 ± 0.1
Ø 1
00 -
0.05
45 - 0.1
Ø 6
9.85
M24
40
85
Ø 2
3 - 0
.1
35 - 0.1
5
5
60°
25.1
Ø 8
5
Ø 1
7 - 0
.1
GAUGE DIA.
TAPER 7/24
30° 30°
45˚
146.8
( Unit : mm )
Tool Shank and Pull Stud Dimensions
Table Dimensions T-slot Dimensions ( Unit : mm )
ADC
C
C
C
B
18H9
32
12
29
AB
J
K
I
H
G
DC
E F
18H9
30
12
36
12
Model A B C D E F G H I J K
L660 2,280 2,790 2,364 2,492 2,662 2,461 779 - - 790 779
L800 2,540 3,190 2,173 2,355 2,490 2,520 750 380 950 845 750
LU-85 2,510 3,060 2,610 2,640 2,960 3,165 700 - 560 850 700
L860 2,800 3,460 2,180 2,450 2,720 2,750 750 - 680 850 750
L1060 3,080 3,596 2,576 3,240 2,753 2,896 779 420 692 488 779
L1165 3,228 3,744 2,442 3,048 2,775 2,959 779 420 692 1,172 779
L1200 3,080 3,596 2,576 3,240 2,753 2,896 779 420 692 488 779
L1320 3,360 3,960 2,720 2,875 2,760 2,970 700 - 400 850 700
Spindle chiller Automatic centralized lubrication system Alarm light
Spindle dust-proof air-sealing system Coolant nozzles around spindle Chips flush coolant system
Fully enclosed splash guard Air gun LED working light & LED illuminating lamp
Heat exchanger for electrical cabinet Coolant washing gun Operation manuals
Coolant system ( with pump and tank ) Automatic power off system Adjusting tools and tool kits
Powerful chip auger Leveling bolts & pads 3 coolant nozzels and 1 air nozzel
RS-232 interface Reservoir for tool changer Disk type oil skimmer
SPECIFICATIONS L660 L800 LU-85 L860 L1060 L1165 L1200 L1320X-axis travel mm 660 800 860 1,060 1,100 1,200 1,320
Y-axis travel mm 460 510 540 610 650 610 710
Z-axis travel mm 510 610 770 660 680 610 660 700
Distance from spindle center to column mm 518 589 611 671 800 671 782
Distance from spindle center to table top mm 150 ~ 660 140 ~ 750 170 ~ 940 150 ~ 810 120 ~ 820 125 ~ 735 122 ~ 782 # 40 : 130 ~ 830 # 50 : 95 ~ 795
WORKING TABLETable size mm 760 x 456 900 x 456 932 x 502 1,258 x 510 1,120 ( Opt. 1,320 ) x 660 1,300 x 600 1,520 x 700
T-slot ( width x no. x space ) mm 18 x 4 x 110 18 x 4 x 120 18 x 4 x 130 18 x 5 x 100 18 x 5 x 120 18 x 5 x120 18 x 5 x 145
Table load capacity kg 500 600 600 700 700 1,000 1,500
SPINDLESpindle motor ( cont. / 30 min ) kW 5.5 / 7.5 ( Opt. 7.5 / 11 ) 7.5 / 11 7.5 / 11 ( Opt. 11 / 15 ) 11 / 15
( Opt. 15 / 18.5 )15 / 18.5
( Opt. 18.5 / 22 )
Spindle speed rpmBelt drive 8,000 ( Opt. 10,000 )
Direct drive 10,000 ( Opt. 12,000 / 15,000 )Direct drive 12,0 00
( Opt. 15,000 )
Belt drive 8,000 ( Opt. 10,000 )
Direct drive 10,000 ( Opt. 12,000 / 15,000 )
Belt drive 8,000 ( Opt. 10,000 )Direct drive 10,000 ( Opt. 12,000 / 15,000 / 20,000 ) Belt drive 8,000
Spindle taper # 40 # 40 # 50
FEED RATEX / Y / Z axes rapid feed rate m/min. 36 / 36 / 30 36 / 36 / 30 48 / 48 / 48 30 / 30 / 24 36 / 36 / 30
Cutting feed rate m/min. 1 ~ 10 1 ~ 10
TOOL MAGAZINETool magazine capacity PCS Carousel type 16 ( Opt. 20 ) / ( Opt. Arm type 24 / 30 ) Arm type 24 ( Opt. 30 / 36 ) Arm type 24 ( Opt. Carousel type 16 / 20 ) Arm type 24 ( Opt. 30 / Chain tyzpe 40 )
Max. tool diameter / adj. pocket empty mm Ø 78 / Ø 150 Ø 78 / Ø 150 Ø 80 / Ø 150 Ø 125 / Ø 250
Max. tool length mm 300 300
Max. tool weight kg 7 7 15
ACCURACYPositioning accuracy ( JIS B 6338 ) mm ± 0.010 / Full Travel ± 0.010 / Full Travel
Positioning accuracy ( VDI 3441 ) mm P ≤ 0.010 / Full Travel P ≤ 0.010 / Full Travel
Repeatability ( JIS B 6338 ) mm ± 0.003 ± 0.003
Repeatability ( VDI 3441 ) mm Ps max ≤ 0.005 Ps max ≤ 0.005
GENERALControl system FANUC / MITSUBISHI / SIEMENS / HEIDENHAIN FANUC / MITSUBISHI / SIEMENS / HEIDENHAIN
Power requirement kVA 19 38 32 42 48
Pneumatic pressure requirement ( min. ) kg/cm2 5 ~ 8 ( 5 ) 5 ~ 8 ( 5 ) 6 5 ~ 8 ( 5 ) 5 ~ 8 ( 5 )
Coolant tank capacity ( pump ) liter 240 240 300 240
Machine weight kg 4,500 5,200 6,500 5,800 6,500 7,200 7,000 8,500
Standard Accessories
13
ZF gear box Workpiece measurement system 4 / 5th-axis indexing table
Linear scales Lift-up system during power off Coolant thru tool holder device
Oil mist collector Automatic voltage regulator Transformer
Coolant through spindle Air corditioner for electrical cabinet Caterpillar type chip conveyor
Coolant centrifuge Tool length measurement system
SPECIFICATIONS L660 L800 LU-85 L860 L1060 L1165 L1200 L1320X-axis travel mm 660 800 860 1,060 1,100 1,200 1,320
Y-axis travel mm 460 510 540 610 650 610 710
Z-axis travel mm 510 610 770 660 680 610 660 700
Distance from spindle center to column mm 518 589 611 671 800 671 782
Distance from spindle center to table top mm 150 ~ 660 140 ~ 750 170 ~ 940 150 ~ 810 120 ~ 820 125 ~ 735 122 ~ 782 # 40 : 130 ~ 830 # 50 : 95 ~ 795
WORKING TABLETable size mm 760 x 456 900 x 456 932 x 502 1,258 x 510 1,120 ( Opt. 1,320 ) x 660 1,300 x 600 1,520 x 700
T-slot ( width x no. x space ) mm 18 x 4 x 110 18 x 4 x 120 18 x 4 x 130 18 x 5 x 100 18 x 5 x 120 18 x 5 x120 18 x 5 x 145
Table load capacity kg 500 600 600 700 700 1,000 1,500
SPINDLESpindle motor ( cont. / 30 min ) kW 5.5 / 7.5 ( Opt. 7.5 / 11 ) 7.5 / 11 7.5 / 11 ( Opt. 11 / 15 ) 11 / 15
( Opt. 15 / 18.5 )15 / 18.5
( Opt. 18.5 / 22 )
Spindle speed rpmBelt drive 8,000 ( Opt. 10,000 )
Direct drive 10,000 ( Opt. 12,000 / 15,000 )Direct drive 12,0 00
( Opt. 15,000 )
Belt drive 8,000 ( Opt. 10,000 )
Direct drive 10,000 ( Opt. 12,000 / 15,000 )
Belt drive 8,000 ( Opt. 10,000 )Direct drive 10,000 ( Opt. 12,000 / 15,000 / 20,000 ) Belt drive 8,000
Spindle taper # 40 # 40 # 50
FEED RATEX / Y / Z axes rapid feed rate m/min. 36 / 36 / 30 36 / 36 / 30 48 / 48 / 48 30 / 30 / 24 36 / 36 / 30
Cutting feed rate m/min. 1 ~ 10 1 ~ 10
TOOL MAGAZINETool magazine capacity PCS Carousel type 16 ( Opt. 20 ) / ( Opt. Arm type 24 / 30 ) Arm type 24 ( Opt. 30 / 36 ) Arm type 24 ( Opt. Carousel type 16 / 20 ) Arm type 24 ( Opt. 30 / Chain tyzpe 40 )
Max. tool diameter / adj. pocket empty mm Ø 78 / Ø 150 Ø 78 / Ø 150 Ø 80 / Ø 150 Ø 125 / Ø 250
Max. tool length mm 300 300
Max. tool weight kg 7 7 15
ACCURACYPositioning accuracy ( JIS B 6338 ) mm ± 0.010 / Full Travel ± 0.010 / Full Travel
Positioning accuracy ( VDI 3441 ) mm P ≤ 0.010 / Full Travel P ≤ 0.010 / Full Travel
Repeatability ( JIS B 6338 ) mm ± 0.003 ± 0.003
Repeatability ( VDI 3441 ) mm Ps max ≤ 0.005 Ps max ≤ 0.005
GENERALControl system FANUC / MITSUBISHI / SIEMENS / HEIDENHAIN FANUC / MITSUBISHI / SIEMENS / HEIDENHAIN
Power requirement kVA 19 38 32 42 48
Pneumatic pressure requirement ( min. ) kg/cm2 5 ~ 8 ( 5 ) 5 ~ 8 ( 5 ) 6 5 ~ 8 ( 5 ) 5 ~ 8 ( 5 )
Coolant tank capacity ( pump ) liter 240 240 300 240
Machine weight kg 4,500 5,200 6,500 5,800 6,500 7,200 7,000 8,500
Specifications are subject to change without notice.
Optional Accessories
14