Weight:Complete solenoid: appr. 320 gArmature: appr. 45 g

Standard:Voltage: 24 V DCFlying leads: 10 cm

Insulation class: B (max. permissibletemperature = 130 °C)

Long life expectancy through plasticbobbin armature bearing.* On request, the solenoid can also besupplied with service-free DU armaturebearing for maximum durability.

Force vs. Stroke diagram F = f (s)

Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature

stroke s = 0 corresponds to armature infully home position

Force vs. stroke characteristics measured withoutreturn spring

H D* 62 06 – F – 24 V DC 100 % ED Order specifications

H Linear solenoidD* DU armature

62 SizesDesign type

06

4686-R

Pull type solenoidThrust type solenoid

Combi type solenoid with return spring2)

Coil terminalsF Flying leads (10 cm standard length)A Push-on connector (optional)

24 Nominal voltage (standard voltage)3)

100 % ED Perm. duty cycle under air cooled conditions (LK)

H6206-F

24 V DC 100% ED

2) Series H 6286-R-... solenoids are available withreturn spring F (0 mm) = 2.5 N and F (15 mm) =0.75 N

3) Other DC voltages are available on request.

100 50 30 15 5 % Perm. duty cycle (ED)4)

11 20 33 50 130 W Nominal coil power Pn45 16 ms Actuation time (ED)

4) If solenoid is mounted directly onto a flat metalsurface of at least 160 cm2, the duty cycle can beextended up to 1.3 x nominal rating

0 5 10 15 20

s/mm

F/N

0,81

2345

8

100 %ED

100

50

3015

510

20

806050

30

H62 Series Linear Solenoid Thrust and/or Pull Type

Doc

umen

t LN

SH

62/1

2

Rev

isio

n 003

Preferred types competitively priced and available on a quick delivery.

H6286-R-F-24VDC 100%EDH6206-F-24VDC 100%EDH6246-F-24VDC 100%ED

Email: sales@impulseautomation.co.ukWebsite: www.impulseautomation.co.uk

Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

Impulse Automation LimitedUnited Kingdom

Company Registration 665193

Ø13

10

5,5

50

63 ±0,5

4

Ø4

1225

27

M344

3834

27

M3

50 30,5±0,5

82,5

44

38

34

27

M3

Ø13

1225

27

M3

10+1

M4

Dimensions given with armature in fully home position–––––––>Direction of stroke

Dimensions given with armature in fully home position–––––––>Direction of stroke

H6206 pull type solenoid

H6246 thrust type solenoid

Ø13

10

5,5

50

93,5

4

Ø4

1225

M3

27

44

38

34

27

M3 30,5 0,5

10+1

M4

Dimensions given with armature in fully home position–––––––>Direction of stroke

H6286-R combi type solenoid with return spring

H62 Series Linear Solenoid Thrust and/or Pull Type

Doc

umen

t LNSH62/22

R

evis

ion

003

Email: sales@impulseautomation.co.ukWebsite: www.impulseautomation.co.uk

Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

Impulse Automation LimitedUnited Kingdom

Company Registration 665193