All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.

Please leave these instructions for the consumer. They contain important information.

NOTES:1. Flush the water supply pipes thoroughly to remove any debris.2. For new installations, assemble faucet to sink before installing.3. The highest working pressure for handspray is 0.5MPa(5 bar). If it exceeds 0.5MPa(5 bar), a pressure reducer is needed. The highest water and environment temperature is 60 ºC. Please keep handspray away from heater, or it may become damaged and cause injury to the user.

835972A-D 1

8690 SINGLE HOLE KITCHEN FAUCET8691 KITCHEN FAUCET WITH PULL-OUT SPRAY8692 8˝ KITCHEN FAUCET

8690 SINGLE HOLE KITCHEN FAUCET8691 KITCHEN FAUCET WITH PULL-OUT SPRAY8692 8˝ KITCHEN FAUCET

BEFORE YOU BEGIN

HANDLE OPERATION

INSTALLATION INSTRUCTIONS

ROUGH-IN DIMENSIONS

Lift the handle gently. Turn clockwise for hot water, counter-clockwise for cold water.

8690 8691 8692

230 205 230

266

Max

.37

Ø32 Ø32Ø32

L=1500MM

5º 5º

20º

835972A-D 4

SERVICE PARTS Kitchen Faucet

880002Plug Button Kit

3010537**Handle

865106**Bonnet

865121Nut

865112Nut

836009Guide

865112Nut

865257Bush(Only for 8691A)

831752Check Valve(Only for 8691A)835696Washer(Only for 8691A)

834793Valve

880086O-Ring

871128O-Ring

871128O-Ring

836316O-Ring

836316O-Ring

865119**Collar Ring

865119**Collar Ring

77091Escutcheon Kit(Only for 8692)

834562**Aerator(837261** for Thailand)

836669Mounting Hardware 836669

Mounting Hardware

865127Mounting Stud

1024405Inlet Hose

1024405Inlet Hose

834515**Hose

871425Plastic Ring

880091Water Flow Restircter(Only for 8691X)

835636Washer

1229483Valve Seat(1057513 only for 8691A)

835636Washer

3006340Lip Washer

77420Filter Washer

835636Washer

835636Washer

837057**Hand Spray

832687Lead weight

1061638Check Valve(Only for 8691A)

1229482Mounting Stud

G1/2˝ G1/2˝

G1/2˝

**Color code must be specified when ordering

210

63.5

165

13018

5

175

195

190

385

Max

.4720

049

5

Max

.47

240

440

Kitchen Faucet

3005433Mounting Nut Assy.

835972A-D 2

How To Install The Escutcheon(Three-hole Sink)

For 8692 Only

Apply a ring of plumbers putty on the underside of the escutcheon(4). Put the O-ring(1) into the chamfer of the spacer(2). Center the spacer over the center hole of the lavatory with the O-ring side down. Cover the holes on both sides with the gaskets(3). Position the escutcheon (4) over the spacer and the gasket.

Put the escutcheon washer(5) into the hole of the escutcheon.

Put the filter washer(21) into the connector(19) and thread it to the shank(12). Lock the hose connector(20). Do not over tighten it.

INSTALLATION

How To Install The Faucet

For 8690, 8692 Only

Put the O-ring(6) into the groove of the body assembly.(NOTE: There is no O-ring for 8692. Install the faucet onto the escutcheon directly.) Screw the mounting stud(7) into the hole(B) of the faucet. Install the flexible supply hoses(8) into the inlet holes (A) of the faucet through the hole of the sink. Tighten them by hand only. Using a wrench may damage the hoses.

From underside of sink, place washer(9), bracket(10) and nut(11) onto the mounting stud. Position the faucet so that mounting stud is toward the front. Tighten the nut to secure the faucet to the sink.

Attach the hoses to water supplies. When facing the front of the faucet, the left hose is hot water, the right hose is cold water.

For 8691 Only

Slide the O-ring(13) and the guide(14) into the groove of the body. Put the hoses into the mounting hole of the sink. Let the bottom of the body against the deck.

From underside of the sink, place the washer(15), bracket(16) and nut (17) onto the mounting stud(12). Position the faucet so that mounting stud is toward the back and the two hoses is symmetrical. Tighten the nut to secure faucet to sink.

Attach the hoses to water supplies(For 8691A, thread the bushes(18) into the water supplies firstly, then attach the hoses to water supplies). When facing the front of the faucet, the left hose is hot water, the right is cold water.

835972A-D 3

CLEANING INSTRUCTIONS

Ensure that all coupling nuts are tight. Ensure that the lever handle is in the off position.Turn on the main water supply and drain, and check for leaks. Repair as needed.

8690, 8692Remove the aerator(22). Run hot and cold water through the faucet for about a minute to remove any debris.

Remove any debris from the aerator. Shut off the faucet, and reinstall the aerator.

8691Remove the hand spray(24), filter washer(25) and aerator(23). Run hot and cold water for about a minute to remove any debris. Remove any debris from the filter washer and aerator. Shut off the faucet. Reinstall the filter washer, aerator and hand spray.

All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with a clean soft cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc. which could adversely affect the finish and are not recommended for cleaning.

Do not use abrasive cleaners or solvents on Kohler faucets and fittings.

How To Use Hand Spray

Press the button(H), (G) for two different forms of water flow, as figure (a), (b) shown. The minimum water pressure is 0.03MPa(0.3bar).

If you want to use the hand spray by hand, take the hand spray and pull out the hose. NOTE: Please pull it gently, or you may damage the hose, connector and loosen the faucet.

INSTALLATION CHECKOUT

24

22

G

H

a

b

20

12

2119

5

3

3

4

2

1

15

98

11

10

13

14

12

A B

18

17

7

6

16

23

25

Escutcheon Kit