setting up your iq4 - foxtel · tv aerial b c d a setting up your iq4 1 first up, let’s check...
TRANSCRIPT
Input 1 Input 2
Digital Audio Out
Optical HDMI
12V DC5A max
USB5V DC 500mA
13V/18VDC350A maxCombined
TV aerial
DCB
A
Setting up your iQ4
1 First up, let’s check you’ve got all the goods
2 Connect your iQ4 to your TV
Make sure your TV (and existing Foxtel box, if you have one) is turned off at the wall.
4 Connect your iQ4 to the internet
5 Tune your free-to-air channels
– Important: If you have existing cables, please make sure you replace them with the new versions provided in this kit.
– Connect your iQ4 to your TV using the cables provided in this kit (refer to diagram).
– Once you’re connected, turn your TV back on and select the HDMI source you’ve connected to.
– You will see a black screen for a couple of minutes, then just follow the prompts.
– If connecting through an amp or sound system you will need an additional 4K compatible HDMI cable to access 4K content.
– Once your new iQ4 is setup and turned on, insert the batteries into your remote whilst pointing it at the iQ4 – this will automatically pair. For more information, visit foxtel.com.au/remotepairing
To receive your free-to-air channels* from your TV aerial, check you’ve connected your iQ4 to your aerial wall plate (as shown above), then:
Need a helping hand? For troubleshooting or support visit foxtel.com.au/support or contact us via SMS on 0408 326 429
Select Home, arrow left and select the Settings icon
Select Home, arrow left and select the Settings icon
Select WiFi.
Select Full Scan.
Select Internet Connection.
Select Terrestrial Channels.
Select your network.
Select Begin Scan.
Enter your WiFi password, select Done and you will be advised once connected.
Once the scan is complete select View TV Guide.
Remote and Batteries
iQ4 Box TV Aerial Cable and Adapter
Foxtel Cables x2 (new customers only)
HDMI Cable(4K compatible)
Power Pack
CUS
0272
_02
FX0
4761
08/
19
*Free-to-air channels will vary based on location. Not all channels are available in all areas.^Requires internet connected iQ4. Shows only available if they’re in your pack, some shows/channels not available.
3 Call 1300 732 681 to activate your iQ4
To TV aerial wall plate (optional, see step 5)
To Foxtel wall plate
To TV
To powerpoint
Access all the iQ4 features and stream^ On Demand content by connecting to WiFi following these simple steps:
CUS0272_02_FX04761_iQ4_SIK_SAT_NoEthernet_A3_FA.indd 1 15/08/2019 5:04 PM