shop drawing #023 record drawings... · schindler elevator corporation performance construction...
TRANSCRIPT
Project #1306 the Crest (106 E 35 Ave) #1306Date Thursday, June 14th, 2018
Address 106 East 35th Ave
Created By Chris GodlerCreated Thursday, June 14th, 2018
Modified Wednesday, March 20th, 2019
Shop Drawing #023
Subject:
Record
Record Name: Shop drawing #023 - Elevator Design & Finish Form
Code: 14-100Drawing Description: Elevator Design & Finish Form
Vendor (Trade): Schindler Required by: 2018-12-17
Submissions
# Received From Trade Sent To ConsultantReceived From Consultant
Review Status
1 2018-06-14 2018-06-14 2018-07-04 Approved
2 2018-12-10 2018-12-10 2019-01-07 Approved
Schindler Elevator Corporation Performance Construction Ltd. 1150-21331 Gordon Way Richmond, BC V6W 1J9
Contact: Rocky Gill Opportunity Number: 0200749445
Telephone 7783274068 Project: The Crest
Fax 6042532328 108 East 35th Avenue
E-mail [email protected] Vancouver, BC V6V 6V6
Date 12/6/2018 Subject Design & Finishes Confirmation
Dear Paul Warwick : Schindler Elevator Corporation would like to thank you for the opportunity to work with Performance Construction Ltd. on this project. Enclosed you will find submittal #2 for your review and approval, which includes 1 copy of the following drawings and brochures.
General layout #L7178 Sheet(s) 1-7 Sub 01
Power Data Sheets
Schindler 3300 Deco Brochure
Schindler Ahead Brochure
NOTE: Please visit the Schindler 3300 showroom HYPERLINK {https://www.schindler3300na.com} to find the following:
- Capabilities & design brochures, installation checklist, layout data and entrance details are located under “Resources”
- Cab configurator, power calculator and Schindler Draw and Spec are located under “Design Tools” Please return this completed submittal along with one (1) complete set of approved drawings by _______________________. NOTE: Manufacturing cannot begin until this submittal is returned.
Please feel free to call me if you have any questions regarding this submittal.
Respectfully submitted, Schindler Elevator Corporation
Rocky Gill Sales Representative
2018-12-11
AMA: Re-visitedpowder-coat finishoptions over primerpainted options, asrecommended bysupplier.
Schindler Elevator Corporation Performance Construction Ltd. 1150-21331 Gordon Way Richmond, BC V6W 1J9
Contact: Rocky Gill Opportunity Number 0200749445
Telephone 7783274068 Project: The Crest
Fax 6042532328 108 East 35th Avenue
E-mail [email protected] Vancouver, BC V6V 6V6
Page 1 of 6
Date 12/6/2018 Subject Design & Finishes Confirmation
Please return this completed submittal along with one (1) complete set of approved drawings by
________________. Simply confirm by initialing on the line to the right of each Design & Finish statement. NOTE: Manufacturing cannot begin until this submittal is returned. Schindler’s 3300 showroom HYPERLINK {https://www.schindler3300na.com} provides an easy-to-use cab configurator to finalize the finished features of your cab. If you use the configurator, please return the results with this submitted.
1 Power supply to be 208 volts - 3 phase, 60 cycles. Enclosed you will find a copy
of our power data for review and approval by your electrical engineer and
electrical contractor.
____________________
Confirm
2 Floor markings for car station, car position indicator and Braille plates will be P,
1, 2, 3, 4, 5.
Available floor markings are
A, B, C, E, F, G, H, I, J, L, M, O, P, R, S, U, UL, LL, PH, SS, RC
-4, -3, -2, -1, 0, 1, 2 ,3, 4, 5, 6, 7, 8
1R, 2R, 3R, 4R
2A, 3A, 4A
2B, 3B, 4B
P1,
*0, *1, *L, *S, *LL
If you prefer alternate markings, please note your desired selections
_____________________________________
____________________
Confirm
AMA: OK
Subject Design & Finishes Confirmation for Opportunity Number 0200749445
Page Page 2 of 6
Date 12/3/2018
3 Main egress floor to be 1.
If you would prefer an alternate main egress, please note your desired
selection_____________________________
NOTE: Where local code requires, an asterisk will be provided to designate the
main egress floor adjacent to the floor marking.
The following markings are available with the floor marking and asterisk on the
same plate: *0,*1, *2, *L and *LL. (see example).
All other main egress markings will require use of the adjacent blank (see
example).
____________________
Confirm
4 Firefighter’s emergency return feature is included with smoke sensors by others.
The primary return floor will be 1.
The alternate return floor will be 2.
If you prefer an alternate return floor(s) please
note _________________________________
____________________
Confirm
5 Hoistway entrances to be as follows:
- Car 1: Front, Two Speed Side Opening, Right hand door opening.
- Door Size: 42" wide x 84" high.
Examples of Typical Configurations: (Center Opening not available on 2100
lb car)
____________________
Confirm
Subject Design & Finishes Confirmation for Opportunity Number 0200749445
Page Page 3 of 6
Date 12/3/2018
6 Hoist beam(s) at top of elevator hoistway to be located as per Schindler layout
drawings with a minimum rated capacity of 7500 lbs and clearly labeled with this capacity.
Hoistway width = 8' 8''
If not accurate change to _________________________
Hoistway depth = 5' 10''
If not accurate change to _________________________
Hoistway overhead = 13' 0''
If not accurate change to _________________________
Pit depth = 5' 0''
If not accurate change to _________________________
Travel = 53' 11''
If not accurate change to _________________________
____________________
Confirm
7 Hoistway entrances including, doors and jambs finish will be:
6 Painted Door(s) : Tupelo Taupe Primer (E098).
Memphis Grey – (P419) Edmonton White – (E081)
Montreal Blue – (P420) Sarasota Yellow – (SW6903)
Havasu Beige – (E053) Tucson Orange – (SW6886)
Napa Burgundy – (E074) Tupelo Taupe Primer – (E098)
Denver Ivy – (E058) Jacksonville Bronze – (E039)
Cleveland Satin – (E035)
____________________
Confirm
AMA: Use Memphis Grey powdercoat finish if tupelo taupe onlycomes as primer paint finish
Subject Design & Finishes Confirmation for Opportunity Number 0200749445
Page Page 4 of 6
Date 12/3/2018
8 Cab type is standard Schindler 3300.
Cab walls to be laminated : Refer to Schindler Standard Plastic Laminate
Finishes brochure.
___Milwaukee Pewter_____________________________
____________________
Confirm
9 Cab ceiling to be - Stainless Steel #4.
____________________
Confirm
10 Handrails to be - Brushed Aluminum.
Handrails – Straight / Flat
____________________
Confirm
11 Cab doors to be Stainless Steel #4.
____________________
Confirm
12 Cab front return and transom to be Stainless Steel #4.
____________________
Confirm
13 Sills to be aluminum.
Platform recess to be 3/8” (10 mm).
Maximum cab weight including floor NOT to exceed 2,315 lbs.
________________
Acknowledge
AMA: OK
AMA: OK to keep as SST
AMA: OK to keep as SST
Subject Design & Finishes Confirmation for Opportunity Number 0200749445
Page Page 5 of 6
Date 12/3/2018
14 Schindler Ahead add-on. Reference Brochure
Sales rep to provide change notice upon request.
IMPORTANT NOTES:
o Hoist beam to be rated for 7,500 lbs. capacity. o Temporary work platform(s) as shown on Sheet 4 is required at the top landing only and must be supplied &
installed by others. o Machine room is not required. The motor is located at the top of the hoistway and the controller is integrated
in the elevator door frame at the top floor. o 208V and 120V electrical disconnects are required at the top floor near the hoistway in a dedicated,
lockable cabinet by others. o 208V and 120V electrical disconnects are required at the top of the hoistway (confirm location with
Schindler field representatives). o In the event of a power failure the elevator is equipped with a battery back-up feature. o Card reader provisions or keyed access lockouts are available, if required. o The interior finishes and design cannot be modified, only the colour of the plastic laminate can be selected
(see brochure and/or colour chain for colour selection). o Maximum floor recess available is 3/8” and maximum weight allowed for flooring is 165 lbs. Flooring to be
supplied and installed by others.
Please confirm/acknowledge each of the items requested and approve the enclosed drawings. Then
return the form and the approved drawings to me. Please feel free to call me if you have any questions
regarding this submittal.
Respectfully submitted
Schindler Elevator Corporation,
Rocky Gill Sales Representative
778-327-4068
Subject Design & Finishes Confirmation for Opportunity Number 0200749445
Page Page 6 of 6
Date 12/3/2018
The following options are available and attractively priced for your consideration. Please note that
if these options are selected after these submittals are returned, the pricing listed below will be
invalid. By selecting any of these options you agree that the contract price will be adjusted
accordingly
Please contact your Schindler representative if you have any additional questions.
Options Price Acceptance
Upgrade entrances from baked
enamel to stainless steel #4
$1,000.00 per Entrance
Upgrade cab walls from plastic
laminate to stainless steel #4
$2,000.00 per Car
Retractable steel pit ladder (Based on
5' 0" Pit Depth)
$1,500.00 per Car
Project #1306 the Crest #1306Date Thursday, June 14th, 2018
Address 106 East 35th Ave
Created By Chris GodlerCreated Thursday, June 14th, 2018
Modified Thursday, July 5th, 2018
Shop Drawing #023
Subject:
Record
Record Name: Shop drawing #023 - Elevator Design & Finish Form
Code: 14-100Drawing Description: Elevator Design & Finish Form
Vendor (Trade): Schindler Required by: 2018-06-28
Submissions
# Received From Trade Sent To ConsultantReceived From Consultant
Review Status
1 2018-06-14 2018-06-14 2018-07-04 Approved
Project #1306 the Crest #1306Date Thursday, June 14th, 2018
Address 106 East 35th Ave
Created By Chris GodlerCreated Thursday, June 14th, 2018
Shop-drawings Submittal Log
Record 1
Record Name: Shop drawing #023 - Elevator Design & Finish Form
Code: 14-100Drawing Description: Elevator Design & Finish Form
Vendor (Trade): Schindler Required by: 2018-06-28
Submissions
# Received From Trade Sent To ConsultantReceived From Consultant
Review Status
1 2018-06-14 2018-06-14
SUBMITTAL REVIEWReview is for general compliance with interior design contract documents. Sole responsibility for correctness of dimensions, details, quantities and safety during fabrica-tion and installation shall remain with the
contractor.
NO EXCEPTIONS TAKEN FURNISH WITH CHANGES NOTES AMEND AND RESUBMIT REJECTED
portico design group
By Christine Bauhaus on Jun 18, 2018
SUBMITTAL REVIEWReview is for general compliance with interior design contract documents. Sole responsibility for correctness of dimensions, details, quantities and safety during fabrica-tion and installation shall remain with the
contractor.
NO EXCEPTIONS TAKEN FURNISH WITH CHANGES NOTES AMEND AND RESUBMIT REJECTED
portico design group
By Christine Bauhaus on Jun 27, 2018
2018-06-27
Schindler Elevator Corporation Performance Construction Ltd. 1150-21331 Gordon Way Richmond, BC V6W 1J9
Contact: Rocky Gill Opportunity Number: 0200749445
Telephone 7783274068 Project: The Crest
Fax 6042532328 108 East 35th Avenue
E-mail [email protected] Vancouver, BC V6V 6V6
Date 6/14/2018
Subject Design & Finishes Confirmation Dear Paul Warwick : Schindler Elevator Corporation would like to thank you for the opportunity to work with Performance Construction Ltd. on this project. Enclosed you will find submittal #1 for your review and approval, which includes 1 copy of the following drawings and brochures.
General layout #7178 Sheet(s) 1-7 Sub 00
Power Data Sheets Schindler 3300 Deco Brochure
NOTE: Please visit the Schindler 3300 showroom at www.schindler3300na.com to find the following:
- Capabilities & design brochures, installation checklist, layout data and entrance details are located under “Resources”
- Cab configurator, power calculator and Schindler Draw and Spec are located under “Design Tools” Please return this completed submittal along with one (1) complete set of approved drawings by _______________________. NOTE: Manufacturing cannot begin until this submittal is returned.
Please feel free to call me if you have any questions regarding this submittal.
Respectfully submitted, Schindler Elevator Corporation
Rocky Gill Sales Representative
Schindler Elevator Corporation Performance Construction Ltd. 1150-21331 Gordon Way Richmond, BC V6W 1J9
Contact: Rocky Gill Opportunity Number 0200749445 Telephone 7783274068 Project: The Crest
Fax 6042532328 108 East 35th Avenue E-mail [email protected] Vancouver, BC V6V 6V6 Page 1 of 6 Date 6/14/2018
Subject Design & Finishes Confirmation Please return this completed submittal along with one (1) complete set of approved drawings by
________________. Simply confirm by initialing on the line to the right of each Design & Finish statement. NOTE: Manufacturing cannot begin until this submittal is returned. Schindler’s 3300 showroom at www.schindler3300na.com provides an easy-to-use cab configurator to finalize the finished features of your cab. If you use the configurator, please return the results with this submitted.
1 Power supply to be 208 volts - 3 phase, 60 cycles. Enclosed you will find a copy of our power data for review and approval by your electrical engineer and electrical contractor.
____________________
Confirm
2 Floor markings for car station, car position indicator and Braille plates will be P, 1, 2, 3, 4, 5. Available floor markings are A, B, C, E, F, G, H, I, J, L, M, O, P, R, S, U, UL, LL, PH, SS, RC -4, -3, -2, -1, 0, 1, 2 ,3, 4, 5, 6, 7, 8 1R, 2R, 3R, 4R 2A, 3A, 4A 2B, 3B, 4B P1, *0, *1, *L, *S, *LL If you prefer alternate markings, please note your desired selections _____________________________________
____________________
Confirm
AMA: Approved by Electrical on Shop drawing # 24(Power data sheets)
AMA: OK
Subject Design & Finishes Confirmation for Opportunity Number 0200749445 Page Page 2 of 6 Date 6/14/2018
3 Main egress floor to be 1. If you would prefer an alternate main egress, please note your desired selection_____________________________ NOTE: Where local code requires, an asterisk will be provided to designate the main egress floor adjacent to the floor marking. The following markings are available with the floor marking and asterisk on the same plate: *0,*1, *2, *L and *LL. (see example).
All other main egress markings will require use of the adjacent blank (see example).
____________________
Confirm
4 Firefighter’s emergency return feature is included with smoke sensors by others. The primary return floor will be 1. The alternate return floor will be 2. If you prefer an alternate return floor(s) please note _________________________________
____________________
Confirm
5 Hoistway entrances to be as follows: - Car 1: Front, Two Speed Side Opening, Right hand door opening.
- Door Size: 42" wide x 84" high. Examples of Typical Configurations: (Center Opening not available on 2100 lb car)
____________________
Confirm
AMA: OK
AMA: OK.
AMA: OK
Subject Design & Finishes Confirmation for Opportunity Number 0200749445 Page Page 3 of 6 Date 6/14/2018
6 Hoist beam(s) at top of elevator hoistway to be located as per Schindler layout drawings with a minimum rated capacity of 7500 lbs and clearly labeled with this capacity. Hoistway width = 8' 8'' If not accurate change to _________________________ Hoistway depth = 5' 10'' If not accurate change to _________________________ Hoistway overhead = 12' 7'' If not accurate change to _________________________ Pit depth = 5' 0'' If not accurate change to _________________________ Travel = 53' 9'' If not accurate change to _________________________
____________________
Confirm
7 Hoistway entrances including, doors and jambs finish will be: 6 Painted Door(s) Memphis Grey – (P419) Edmonton White – (E081)
Montreal Blue – (P420) Sarasota Yellow – (SW6903)
Havasu Beige – (E053) Tucson Orange – (SW6886)
Napa Burgundy – (E074) Tupelo Taupe Primer – (E098)
Denver Ivy – (E058) Jacksonville Bronze – (E039)
Cleveland Satin – (E035)
____________________
Confirm
13'-1 1/2"
As noted by interior designeron shop drawing 27
Subject Design & Finishes Confirmation for Opportunity Number 0200749445 Page Page 4 of 6 Date 6/14/2018
8 Cab type is standard Schindler 3300. Cab walls to be laminated : Refer to Schindler Standard Plastic Laminate Finishes brochure. ________________________________
____________________
Confirm
9 Cab ceiling to be - Stainless Steel #4.
____________________
Confirm
10 Handrails to be - Brushed Aluminum.
____________________
Confirm
11 Cab doors to be Stainless Steel #4.
____________________
Confirm
12 Cab front return and transom to be Stainless Steel #4.
____________________
Confirm
13 Sills to be aluminum. Platform recess to be 3/8” (10 mm). Additional cab weight including floor NOT to exceed 2,315 lbs.
________________
Acknowledge
Milaukee Pewter
revised to painted Tupelo Taupe - June 27, 2018
AMA: OK Per interior designercomments on Shop drawing 27
AMA: OK
Subject Design & Finishes Confirmation for Opportunity Number 0200749445 Page Page 5 of 6 Date 6/14/2018
IMPORTANT NOTES:
o Hoist beam to be rated for 7,500 lbs. capacity. o Temporary work platform(s) as shown on Sheet 4 is required at the top landing only and must be supplied &
installed by others. o Machine room is not required. The motor is located at the top of the hoistway and the controller is integrated
in the elevator door frame at the top floor. o 208V and 120V electrical disconnects are required at the top floor near the hoistway in a dedicated,
lockable cabinet by others. o 208V and 120V electrical disconnects are required at the top of the hoistway (confirm location with
Schindler field representatives). o In the event of a power failure the elevator is equipped with a battery back-up feature. o Card reader provisions or keyed access lockouts are available, if required. o The interior finishes and design cannot be modified, only the colour of the plastic laminate can be selected
(see brochure and/or colour chain for colour selection). o Maximum floor recess available is 3/8” and maximum weight allowed for flooring is 165 lbs. Flooring to be
supplied and installed by others. Please confirm/acknowledge each of the items requested and approve the enclosed drawings. Then return the form and the approved drawings to me. Please feel free to call me if you have any questions regarding this submittal.
Respectfully submitted Schindler Elevator Corporation,
Rocky Gill Sales Representative 778-327-4068
Subject Design & Finishes Confirmation for Opportunity Number 0200749445 Page Page 6 of 6 Date 6/14/2018
The following options are available and attractively priced for your consideration. Please note that if these options are selected after these submittals are returned, the pricing listed below will be invalid. By selecting any of these options you agree that the contract price will be adjusted accordingly
Please contact your Schindler representative if you have any additional questions.
Options Price AcceptanceUpgrade entrances from baked enamel to stainless steel #4
$1,000.00 per Entrance
Upgrade cab walls from plastic laminate to stainless steel #4
$2,000.00 per Car
Retractable steel pit ladder (Based on 5' 0" Pit Depth)
$1,500.00 per Car