SHO

TG

UN

PAGE 198 Office/Tech: 641-623-5401GUARANTEED. FOREVER.

SINCE 1939

CH

OK

E T

UB

ES

SHOTGUN INDEXChoke Tubes . . . . . . . . . . . . . . . . . . . 198-200 Replacement Parts . . . . . . . . . . . . . . 202-204

Competition Gear . . . . . . . . . . . . . . 210-212 Stocks . . . . . . . . . . . . . . . . . . . . . . . . 207-210

Magazine Tubes & Parts . . . . . . . . 204-207 Tactical Accessories . . . . . . . . . . . . . . . . .212

Performance Parts . . . . . . . . . . . . . . 200-202

Non-evaporating, metallic base, anti-seize lubricant prevents corrosion and galling caused by high pressure loads and extreme temperatures. abSPECS: A squeeze tube, net wt. 3/4 oz. (21 g).

BIRCHWOOD CASEY

CHOKE TUBE LUBEEliminates Stuck Choke Tubes, Barrel Damage

#167-400-150AU Choke Tube Lube, 1K4E99 � � � � � � � � � � � � $ 7.99- 3 or More -Choke Tube Lube, per each, 1K3N87 � � � � � � � $ 7.20

Aluminum fingers accurately align the wrench inside the tube and hold the teeth in place. Crank

handle quickly spins tubes in or out. Fits factory choke tubes and Briley X-2 tubes. (Not for Briley special thinwall tubes.) abSPECS: Plastic knob, aluminum fingers/handle, stainless steel body.

BRILEY CHOKE TUBE SPEED WRENCHSpeed & Leverage To Quickly Remove Tubes

#129-070-012AU 12 Gauge Tube Wrench, 9B28J99 � � � $ 30.99#129-070-020AU 20 Gauge Tube Wrench, 9B29A99 � � � 33.99

“Ears” give the leverage needed to unscrew tight choke tubes damage-free. Good control for installation, too. Sized to fit Colonial brand tubes; fits many others. Pocket-sized. abSPECS: Steel. 21/2" (6.3cm) l, 11/4" (3.2cm) w, .059" (1.5mm) thick.

COLONIAL ARMS

CHOKE TUBE WRENCHA Quarter With Guts!

#198-100-001AU Choke Tube Wrench, 8A2N99 � � � � � � � � �$ 5.99

If a barrel is too thin to tap for screw-in choke tubes or it’s chrome-lined (eats reamers/taps), or if the end has been bulged, you can install screw-in tubes. Simply turn the last 3/4" of barrel to dimension in chart and solder adapter in place. abSPECS: Alloy steel. 21/2" (6.3cm) lg. 12 Ga. .867" (22mm) O.D. Accepts Win-Choke®-style tubes (Colonial “Invisible” Tubes). Maximum bore di-ameter .735".

SCREW-IN

CHOKE ADAPTERLets “Too-Thin” Barrels Accept Win-

Choke®-Style Tubes

STOCK # THREAD FITS BBL TURNED TO GAUGE#514-132-795AU .812"-32 .795 12#514-132-840AU .812"-32 .840 12

— Advise # — Screw-In Choke Adapter, 8A16Q99 � � � � �$ 18.99

Brownells partnered with Carl-son’s to develop a set of 12 gauge choke tubes specifically optimized for 3-Gun competition. Having one of these sets in your range bag en-sures you’re equipped with the exact constriction for any stage, from flying

clay pigeons to a troublesome marker next to a “no-shoot.” Each set includes Improved Cylinder for close-range targets, Modified for mid-range, and Full for long-distance. These tubes are designed to throw tighter and denser patterns than conventional tubes, so be sure to pattern your shotgun with the shotshell load you plan to use to be sure you know the results you’ll get with each of these tubes. Knurled rings give plenty of grasping surface for quick removal, and the constriction is laser marked on the end and body for easy refer-ence. Can be used with lead, steel, or Hevi-Shot. abSPECS: 17-4 stainless steel, matte black. 12 gauge only. Remington – 2.875" (7.3cm) long. Fits most Remington shotguns. Winchester/Brown-ing Invector/Mossberg – 2.35" (5.97cm) long. Fits Winchester, Browning Invector, Mossberg 500, Weatherby, and Savage. Benelli Crio® Plus – 3.75" (9.525cm) long. Fits Benelli Crio Plus choke system, including Super Black Eagle II, CrioTech M2 and other models. All models for 12 gauge only. Do not use slugs, sabots, or rifled slugs in constrictions tighter than Improved Cylinder, and do not shoot steel shot larger than BB or any steel load faster than 1,550 feet per second through the Full.

/CARLSON’S

3-GUN CHOKE TUBE SETSThree Different Constrictions So

You’re Ready For Any Stage Of Competition

#155-000-220AU Remington 3-Gun Choke Tube Set, 5E88E65 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 89.99

#155-000-219AU Winchester/Browning Invector/Mossberg 3-Gun Choke Tube Set, 5E88Q65 � � � � � � � � � � � � � � � � � � � � � � � � � � 89.99

#155-000-221AU Benelli Crio Plus 3-Gun Choke Tube Set, 5E88Q65 � � � � � � � � � � � � � � � � � � � � � 89.99

WIN-CHOKE® or TRU-CHOKE™-STYLE TUBES, WHICH SHOULD I THREAD BARRELS FOR? Win-Choke®-style tubes are thicker and generally more available. Tru-Choke™ Standard-style tubes are thinner, and the

Tru-Choke™ Thinwall-style tubes thinner yet, so a far wider range of barrels can be threaded to accept them. But, they are less available. Ideally, you would have tooling for all three styles and thread barrels for: Win-Choke®-style tubes when they are thick enough; Tru-Choke™ Standard-style on thinner barrels; Tru-Choke™ Thinwall-style tubes on the thinnest 12 ga. side-by-side and over-under barrels. But, that’s a lot of money. So, measure the barrels of commonly used shotguns in your area, check “Screw-In Choke Installation Requirements” and buy the tooling that will convert the most guns.

Choke constrictions, from Cylinder to X-Full let you precisely match your

load to the shooting conditions. Long tube extends beyond the length of the muzzle, features highly polished interior for less pellet deformation; reduced fliers and tighter patterns. Knurled grasping band speeds installation and removal. Choke constriction is marked on band, no need to remove tube to verify size. abSPECS: 17-4 stainless steel. Polished, bright finish. Extends beyond muz-zle approx. .812" (20.6mm). Use with lead and bismuth shot. Steel shot can be used with constrictions of Modified and larger. Beretta chokes will not fit guns with Optima choke thread.

BROWNING INVECTOR PLUSSTK# 12 GA. STK# 20 GA. CHOKE

#129-000-206AU #129-000-207AU Cylinder#129-005-001AU #129-006-001AU Skeet#129-005-002AU #129-006-002AU Imp Cyl#129-005-003AU NA Lt Mod#129-005-004AU #129-006-004AU Mod#129-005-005AU NA Imp Mod#129-005-006AU NA Lt Full#129-005-007AU NA Full#129-005-008AU NA X-Full

— Advise # — Invector Plus Choke Tube, 9B42Q82 � � � �$ 49.95REMINGTON

STK# 12 GA. STK# 20 GA. CHOKE#129-015-003AU NA Lt Mod#129-015-004AU #129-016-004AU Mod#129-015-005AU NA Imp Mod#129-015-007AU #129-016-007AU Full

— Advise # — Remington Choke Tube, 9B42M82 � � � � � �$ 49.95

BERETTA & BENELLI 12 GAUGESTK# BERETTA 12 GA. STK# BENELLI 12 GA. CHOKE

#129-025-001AU #129-025-001AU Skeet#129-025-002AU #129-025-002AU Imp Cyl#129-025-003AU #129-025-003AU Lt Mod#129-025-005AU #129-025-005AU Imp Mod#129-025-006AU #129-025-006AU Lt Full

BRILEY X-2 SCREW-IN

X-2 SCREW-IN CHOKE TUBEExtended Length, Competition Grade

Tubes Improve Pattern & Accuracy

BROWNING INVECTORSTK# 12 GA. STK# 20 GA. CHOKE

#129-001-001AU #129-002-001AU Skeet#129-001-002AU #129-002-002AU Imp Cyl#129-001-003AU NA Lt Mod#129-001-004AU #129-002-004AU Mod#129-001-005AU NA Imp Mod#129-001-007AU NA Full

— Advise # — 12/20 Ga. Inv. Choke Tube, 9B42L99 � � � �$ 46.99— Advise # — Beretta/Benelli Choke Tube, 9B42K82 � � � 49.95

— Advise # — 12/20 Ga. Inv. Choke Tube, 9B42L99 � � � $ 46.99— Advise # — Beretta/Benelli Choke Tube, 9B42K82 � � 49.95

Minimum gap geometry and high resolution “RMS” interior finish gives less pellet deformation; consistently tighter patterns. Choke constriction is laser marked on color coded band, no need to remove tube to verify size. Long tube with hidden wrench slots extends beyond the length of the muzzle. Knurled grasping band speeds installation and removal. abSPECS: 17-4 stainless steel. Polished bright finish. Extends beyond muzzle approximately .812" (20.6mm). Use with lead and bismuth shot. Steel shot can be used with constrictions of Modified and larger. Available to fit Browning Invector Plus and Beretta/Benelli.

BRILEY

SPECTRUM MACH 1 CHOKE TUBECompetition Grade Tubes, Extra High Polish

Interior Improves Pattern & Accuracy

STK# INVECTOR PLUS

STK# BERETTA/BENELLI

CHOKE GAUGE

#129-000-019AU #129-000-055AU Skeet 12#129-000-020AU #129-000-056AU Imp Cyl 12#129-000-021AU #129-000-057AU Lt Mod 12#129-000-022AU #129-000-058AU Mod 12#129-000-023AU #129-000-059AU Imp Mod 12#129-000-024AU NA Lt Full 12#129-000-025AU NA Full 12#129-000-026AU NA X-Full 12

— Advise # — Spectrum Mach 1 Choke Tube, 9B55A67 � � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 64.95

Steel choke tubes fit popular models of shotguns and give tight patterns with 00 and 000 buckshot. Chokes feature ports to help tame the recoil and muzzle jump produced by buckshot loads. Can be used with lead, steel and Hevi-Shot. Not for use with any steel shot larger than BB or faster than 1550 fps. abSPECS: 17-4 heat treated steel. Matte black finish.

CARLSON’S

BUCKSHOT CHOKE TUBESSpecial Choke Tubes Give Tight

Patterns With Buckshot

#155-000-225AU Rem Choke Buckshot Choke, 5E41J62 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 47.95

#155-000-226AU Beretta//Benelli Mobil Choke Buckshot Choke, 5E41D62 � � � � � � � � � � � 47.95

#155-000-227AU Win-Choke Buckshot Choke, 5E41K62 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 47.95

abCARLSON’S UNIVERSAL WRENCH - Fits all of the most popular brands of choke tubes.SPECS: Steel, blued. 2" (5cm) long. 12 or 20 ga. only.#155-100-012AU 12 Ga. Univ. Choke Wrench,

5E15L99 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 16.99#155-100-020AU 20 Ga. Univ. Choke Wrench,

5E15E99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 16.99

CARLSON’S UNIVERSAL CHOKE TUBE WRENCH - Stronger, and a lot easier on your choke tubes and your fingers, than a quarter. Fits virtually every choke tube slot. Includes key chain.SPECS: Stainless steel, 21/2" (6.3cm) long with 6" chain.#155-103-000AU Universal Choke Wrench, 5E3K99 � � � � �$ 4.99

CARLSON’S SPORTING CLAYS SPEED WRENCH - Crank and handle provide both speed and leverage for quickly removing choke tubes. Large, easy-to-grip knob expands the vinyl, non-marking gripping surface that’s inserted into the tube.SPECS: Plastic knob. Aluminum shaft and handle.#155-102-020AU 20 Ga. S/C Speed Wrench, 5E14D99 � � $ 17.99#155-102-012AU 12 Ga. S/C Speed Wrench, 5E15D99 � � 18.99

CARLSON’S CHOKE TUBE WRENCH

ab

SHO

TG

UN

PAGE 199Orders: 800-741-0015order on the web

brownells.com

CH

OK

E T

UB

ES

Parallel section 25% lon-ger than Carlson’s conventional tubes helps produce even more consisten, dense shot patterns. Extra smooth interior surface minimizes shot deformation. La-ser marked constriction provides fast identification. External knurled ring extends approximately 3/4" from end of barrel for fast changes between stations. Can be used with lead, steel, copper-plated, and nickel shot, as well as Hevi-Shot and buck shot. Steel shot larger than BB should not be used in tubes with Extra Full constriction. abSPECS: 17-4 stainless steel, natural silver finish. 12 gauge only. Constric-tion (SIZE) listed in tables below. Threads are as follows: Win-Choke® - .812"-32. Also fits Browning Invector, Mossberg 500, Weatherby, and Sav-age. Browning Invector-Plus - .820"-32. Beretta - .810"- 1mm. Also fits Benelli M1 and Super 90. Rem™ Choke - .812"-32. Crio-Plus fit Benelli® Criotech® M2 and Super Black Eagle II.

CARLSON’S

SPORTING CLAYS TUBEGives Tight, Consistent Patterns With Minimal Shot Deformation

12 GAUGE CLAYS TUBES

STK# WIN-CHOKE STK# INV.-PLUS CHOKE#155-000-001AU .730" #155-000-009AU .740" Cyl#155-000-002AU .725" #155-000-010AU .735" Skeet#155-000-003AU .720" #155-000-011AU .730" Imp Cyl#155-000-004AU .715" #155-000-012AU .725" Lt. Mod#155-000-005AU .710" #155-000-013AU .720" Mod#155-000-006AU .705" #155-000-014AU .715" Imp Mod#155-000-007AU .700" #155-000-015AU .710" Full#155-000-008AU .690" #155-000-016AU .700" Extra Full

— Advise # — 12 Gauge Clays Tube, 5E36K99 � � � � � � � � $ 38.99

12 GAUGE CLAYS TUBES

STK# BERETTA STK# REM CHOKE CHOKE#155-000-017AU .725" #155-000-025AU .730" Cyl#155-000-018AU .720" #155-000-026AU .725" Skeet#155-000-019AU .715" #155-000-027AU .720" Imp Cyl#155-000-020AU .710" #155-000-028AU .715" Lt. Mod#155-000-021AU .705" #155-000-029AU .710" Mod#155-000-022AU .700" #155-000-030AU .705" Imp Mod#155-000-023AU .695" #155-000-031AU .700" Full#155-000-024AU .685" #155-000-032AU .690" Extra Full

— Advise # — 12 Gauge Clays Tube, 5E34N99 � � � � � � � � $ 37.99

CRIO-PLUS TUBES

— Advise # — 12 Ga. Crio-Plus Tube, 5E36C99 � � � � � � � $ 40.99

Crio-Plus

STOCK # CHOKE SIZE#155-000-068AU Cyl .725"#155-000-069AU Skeet .720"#155-000-070AU Imp Cyl .715"#155-000-071AU Lt Mod .710"

STOCK # CHOKE SIZE#155-000-072AU Mod .705"#155-000-073AU Imp Mod .700"#155-000-074AU Full .695"#155-000-075AU X-Full .690"

Flush mount, stainless steel tubes available for the many shotguns using the popular Win-Choke thread size and standard Tru-Chokes, plus Rem-ington, Beretta/Benelli, Browning Invector Plus, and Mossberg 835 Ultra Mag. These tubes can be used with magnum and steel shot loads. Tru™-Choke Thinwall tubes are recommended for 23/4" lead shot loads ONLY. All X-Full and Turkey constrictions are for use with lead and Hevi-Shot ONLY! abSPECS: 1704 Stainless steel, heat treated. Available for 12 and 20 gauge, depending on model. Tru-Choke™-style (T-C): .795"-44 tpi fits 12 ga. Tru-Choke-style, .675"-44 tpi fits 20 ga. Tru-Choke-style. Tru-Choke Thinwall-style: .774"-44 tpi fits 12 ga. barrels altered to accept Thinwall chokes and recommended for 23/4" lead shot loads ONLY. Win-Choke®-style: .812"-32 tpi (12 ga.) or .687"-32 (20 ga.) fits barrels originally equipped with Win-Choke®, Browning Invector, Mossberg Accu-Choke®, Weath-erby IMC®, or Savage choke tubes. Rem™Choke-style: .814"-32 tpi (12 ga.) or .702"-32 (20 ga.) fits barrels originally equipped with Rem™Choke factory tubes. Beretta/ Benelli: .810"-1mm fits Beretta and Benelli M1 and Super 90. Invector Plus-style: .820"-32 tpi (12 ga.) fits barrels originally equipped with Browning Invector Plus factory tubes.

STK# BER./BEN. 12 GA.

STK# BER./BEN. 20 GA. CHOKE

#155-812-008AU #155-820-008AU Cyl

TRU-CHOKE (T-C) & TRU-CHOKE THINWALL

STK# T-C 12 GA.

STK# T-C 20 GA.

STK# THINWALL 12 GA. CHOKE

#155-212-008AU #155-220-008AU #155-412-008AU Cyl#155-212-007AU #155-220-007AU #155-412-007AU Skeet#155-212-006AU NA #155-412-006AU Imp Cyl#155-212-004AU #155-220-004AU #155-412-004AU Mod#155-212-003AU NA #155-412-003AU Imp Mod#155-212-002AU #155-220-002AU #155-412-002AU Full#155-212-001AU #155-220-001AU #155-412-001AU X-Full#155-212-000AU #155-220-000AU NA Turkey

NA #155-220-006AU NA Imp

— Advise # — Tru-Choke Std & Thinwall Choke Tubes, 5E17L99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 18.99

WIN-CHOKE & INVECTOR PLUS

STK# WIN. 12 GA.

STK# WIN. 20 GA.

STK# INV. PLUS 12 GA. CHOKE

#155-000-090AU #155-000-052AU #155-612-008AU Cyl#155-000-091AU #155-000-053AU #155-612-007AU Skeet#155-000-092AU #155-000-054AU #155-612-006AU Imp Cyl#155-000-093AU #155-000-055AU #155-612-004AU Mod#155-000-094AU #155-000-056AU #155-612-003AU Imp Mod#155-000-095AU #155-000-057AU #155-612-002AU Full#155-000-096AU #155-000-058AU #155-612-001AU X-Full#155-000-097AU #155-000-059AU #155-612-000AU Turkey

— Advise # — Invector Plus Choke Tube, 5E15D99 � � � � �$ 16.99

REM-CHOKE

STK# REM. 12 GA.

STK# REM. 20 GA. CHOKE

#155-712-008AU #155-720-008AU Cyl#155-712-007AU NA Skeet#155-712-006AU #155-720-006AU Imp Cyl#155-712-004AU #155-720-004AU Mod#155-712-003AU #155-720-003AU Imp Mod#155-712-002AU #155-720-002AU Full#155-712-001AU #155-720-001AU X-Full#155-712-000AU #155-720-000AU Turkey

— Advise # — Win- & Rem Choke Tubes, 5E14K99 � � � � � $ 15.99

BERETTA/BENELLI

CARLSON’S CHOKE TUBENon-Rusting Stainless Steel

STK# BER./BEN. 12 GA.

STK# BER./BEN. 20 GA. CHOKE

#155-812-007AU #155-820-007AU Skeet#155-812-006AU #155-820-006AU Imp Cyl#155-812-004AU #155-820-004AU Mod#155-812-003AU #155-820-003AU Imp Mod#155-812-002AU #155-820-002AU Full#155-812-001AU #155-820-001AU X-Full#155-812-000AU #155-820-000AU Turkey

— Advise # — Beretta/Benelli Choke Tubes, 5E14B99 � �$ 16.99

Precision machined from 17-4 stainless steel, these choke tubes fea-ture a 25% larger parallel section than conventional tubes, resulting in tighter, denser, and more consistent patterns. Choke size is laser etched on each tube for easy identification, and the knurled end makes removal quick and easy. Lead, copperplated, nickel Hevi-Shot™, bismuth, tungsten, or steel shot may be used in these choke tubes. Do not use steel shot larger than BB in any Sporting Clays Choke Tube tighter than full constriction. abSPECS: 17-4 stainless steel, polished.

CARLSON’S BROWNING INVECTOR DS CHOKE TUBE

Patterns Better Than Standard Choke Tubes

STOCK # CHOKE DIA.#155-000-228AU Cylinder .740#155-000-229AU Skeet .735#155-000-230AU Improved Cylinder .730#155-000-231AU Light Modified .725#155-000-232AU Modified .720#155-000-233AU Improved Modified .715#155-000-234AU Full .710#155-000-235AU Extra Full .700#155-000-236AU Turkey .665

— Advise # — Invector DS Choke Tube, 5E33D99 � � � � � $ 36.99

External “Special Purpose” Choke Tubes made from high tensile strength e.d.t. 150 carbon steel to withstand the higher pressures created by large shot and the constant pounding of com-petitive shooting without bulging at

the threads or splitting the barrel. If a tube does fail, simply remove and replace with another. abSPECS: Blued e.d.t. 150 carbon steel choke tubes, Hardened to Rc 32. Approx. 23/4" (6.98cm) long. Dimension shown in price line is nominal I.D. Tru-Choke™ (TC) 12 ga. .795"-44 tpi. 20 ga. .675"-44 tpi. Tru-Choke™ Thinwall (TW) 12 ga. .774"-44 tpi. Rem™Choke (RC) 12 ga. .812"-32 tpi. Win-Choke® (WC) .812"-32 tpi.

TURKEY TUBE - Deliver extra tight patterns when used with heavi-er charges of large size lead shot. Not for use with steel shot!#198-025-109AU 12 Ga. TC, .680" full, 8A19M99 � � � � � � �$ 22.99#198-025-110AU 12 Ga. TC, .675" X-full, 8A18E99 � � � � � � 21.99#198-025-309AU 12 Ga. RC, .680" full, 8A19M99 � � � � � � � 22.99#198-025-009AU 12 Ga. WC, .680" full, 8A17D99 � � � � � � � 21.99#198-024-410AU 20 Ga. TC, .570" X-full, 8A19E99 � � � � � � 22.99

CARD SHOOTING TUBE - Tru-Choke™, Rem™Choke and Win-Choke®-style tubes with very tight constriction for tightest pat-terns with #10 lead shot. Not for use with shot sizes larger than #8 lead. Not for use with steel shot!#198-026-302AU 12 Ga. RC, .654" #2 Card, 8A19I99 � � � �$ 22.99#198-026-002AU 12 Ga. WC, .654" #2 Card, 8A19G99 � � 22.99

GUNSMITH BLANK TUBE - Undersized I.D., open up to match cus-tomer’s needs. Must not be used as sold. Must be opened up. Gun damage or shooter injury may occur if constriction is too tight for the shot size and type being used!#198-027-044AU 12 Ga. TC, .635" Blank, 8A19P99 � � � � � �$ 22.99#198-027-244AU 12 Ga. TW, .635" Blank, 8A16B99 � � � � � 21.99#198-027-332AU 12 Ga. RC, .635" Blank, 8A18J99 � � � � � � 23.99#198-027-032AU 12 Ga. WC, .635" Blank, 8A16C99 � � � � � 21.99

COLONIAL ARMS

“SPECIAL PURPOSE” CHOKE TUBEUnique Designs For Competition Use

Reduced diameter, extended knurled ring gives the necessary clearance to let you use two choke tubes in side-by-side and over/under guns. Extended tube places the choke restriction outside the barrel. Prevents steel shot battering from jamming tube into the barrel. Knurled ring for easy removal without a wrench. Not for use with “F” or “T” size shot! abSPECS: Steel, blue finish. 23/8" (6cm) long. Tru-Tube fits EAA Baikal and other guns. 12 ga. only, .795"-44 tpi.

COLONIAL ARMS

DOUBLE GUN TUBESteel Shot Tubes; Slim Profile Fits EAA

Baikal Doubles & Over/Unders

#198-000-001AU 12 Ga. Imp Cyl Choke, 8A16F99 � � � � � �$ 24.99#198-000-002AU 12 Ga. Modified Choke, 8A16B99 � � � � � 24.99#198-000-003AU 12 Ga. Full Choke, 8A16A99 � � � � � � � � � � 21.99#198-000-004AU 12 Ga. X-Full Choke, 8A16L99 � � � � � � � � 21.99

Super full constriction gives dense patterns for precise shot placement. Multiple ports reduce muzzle rise and recoil. Hardened stainless steel adds strength and wearability. Knurled for fast, easy removal. CAUTION: Turkey constrictions are FOR LEAD or Hevi-Shot ONLY! abSPECS: 1704 stainless steel, hardened. Matte black finish. 23/8" (6cm) long. REM fits 12 ga. Remington .812-32 threads only. Inv. Plus fits Browning Invector Plus, WBMW fits Winchester, Browning Invector, Mossberg 500, Weatherby Beretta fits Beretta/Benelli, Moss. 835 fits Mossberg 835.

EXTENDED TURKEY TUBES - 17-4, heat-treated, stainless steel tur-key tubes stand up to the heaviest loads and deliver tight, consistent patterns with less fliers. Knurled on the end for quick installation and removal. 12 gauge tubes extend approximately 1" from the end of the barrel, and 20 gauge tubes extend approximately 3/4" from the end of the barrel. For use with lead, copperplated, nickel, Hevi-Shot, buffered lead, and bismuth shot. NOT FOR USE WITH STEEL SHOT.SPECS: 17-4, heat-treated stainless steel, matte blue. NOT FOR USE WITH STEEL SHOT

STOCK # CONSTRICTION FITS GAUGE#155-000-076AU .575 Win-Choke® 20#155-000-077AU .575 Rem™-Choke 20#155-000-080AU .640 Rem™-Choke 12#155-000-081AU .660 Rem™-Choke 12#155-000-082AU .640 Win-Choke® 12#155-000-083AU .660 Win-Choke® 12#155-000-078AU .575 Beretta/Benelli 20#155-000-079AU .585 Browning Invector Plus 12#155-000-084AU .640 Beretta/Benelli 12#155-000-085AU .650 Beretta/Benelli 12#155-000-086AU .655 Browning Invector Plus 12#155-000-087AU .665 Browning Invector Plus 12

— Advise # — Extended Turkey Tube, 5E26F99 � � � � � � � $ 27.99

#155-000-089AU Benelli Cro-Plus, 12 Ga. .665", 5E40P99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 44.99

CARLSON’S PORTED TURKEY TUBETight Patterns, Reduced Recoil

STOCK # FITS CHOKE DIA. PRICE#155-000-035AU Rem. .665" 5E34E99 $ 38.99#155-000-036AU Inv. Plus .665" 5E38N99 $ 42.99#155-000-037AU WBMW .660" 5E34F99 $ 38.99#155-000-038AU Beretta .665" 5E34B99 $ 38.99#155-000-039AU Moss. 835 .675" 5E34H99 $ 38.99

ab

SHO

TG

UN

PAGE 200 Office/Tech: 641-623-5401GUARANTEED. FOREVER.

SINCE 1939

CH

OK

E T

UB

ES

Steel shot will bulge even the toughest, thickest shotgun bar-rel at the choke ruining both barrel and choke tube. Colonial solves the

problem by locating the choke beyond the barrel and threads. A Super Steel tube will expand, but all that’s damaged is the tube, not your barrel. Just unscrew the tube and replace. abSPECS: Blued steel. Approx. 25/8" (6.7cm) long. 12 ga. only. Threads as follows: Win-Choke® Invisible - .812"-32 tpi. Tru Choke™-style Tru-Tube - .795"-44. Tru-Choke™-style Thinwall are .774"-44.

COLONIAL ARMS

SUPER STEEL SCREW-IN CHOKE TUBE FOR STEEL SHOT

Tough, Blued Steel Designed To Take Steel Shot Abuse

STK# WIN-CHOKE STK# TRU-TUBE STK# THINWALL CHOKE#198-712-725AU #198-512-730AU #198-412-725AU Imp Cyl#198-712-715AU #198-512-720AU #198-412-715AU Mod#198-712-705AU #198-512-710AU #198-412-705AU Full

NA #198-512-705AU #198-412-700AU X-Full

— Advise # — Super Steel Tube, 8A17P99 � � � � � � � � � � � � �$ 25.99

Genuine Remington seamless choke tubes made of heat-treated steel alloy for uncompromised strength. Fits Remington shotguns threaded for Rem™ Choke only. Invis-ible Flush Fit models do not protrude from the barrel. Turkey tubes extend beyond the end of the barrel to allow a long, gentle constriction. Turkey chokes are designed for factory over-bored barrels only and are for lead shot only!* ab

SPECS: Fits REM™ Choke, .812"-32 tpi threads. Flush Fit - 17-4 stainless steel, polished, flush fitting. 20-gauge Full and Modified tubes can be used with steel and lead shot. Turkey - Carbon steel, blued, extends beyond muzzle. Wrenches - Carbon steel, blued. 4-notch type.

RIFLED SLUG TUBE - Quickly convert your REM™ Choke equipped shotgun into a deer gun. Fully-rifled tubes spin the slug for better stability and increased accuracy.SPECS: Stainless steel. Flush fit, 12 ga. only. .812"-32 tpi. Fits guns threaded for Rem™ Choke tubes only.#767-000-237AU Slug Tube, 8F43B99 � � � � � � � � � � � � � � � � �$ 47.99

REM™ CHOKE

FACTORY CHOKE TUBEOriginal Equipment Tubes

#767-000-238AU Full Tube, 20 Ga., 8F14I99 � � � � � � � � � � $ 16.99#767-000-236AU *X-Full Turkey Tube, 8F23P99 � � � � � � � 24.99#767-000-234AU *Super-Full Turkey Tube, 8F25K99 � � � 26.99#767-000-195AU 12 Ga. Wrench, 8F7K99 � � � � � � � � � � � � � 8.99#767-000-196AU 20 Ga. Wrench, 8F9M99 � � � � � � � � � � � � 10.99

STK# 12 GA. FLUSH FIT

STK# 20 GA. FLUSH FIT CHOKE

#767-000-231AU NA Imp Skeet#767-000-229AU #767-000-240AU Imp Cyl#767-000-228AU #767-000-239AU Mod

NA #767-000-241AU SkeetNA #767-000-238AU Full

— Advise # — Flush Fit Tubes, 8F15H99 � � � � � � � � � � � � � � $ 16.99

Multi-purpose, screw-in choke tube gives excellent performance with a variety of law enforcement shotgun ammunition, including rifled slugs, buckshot, and breach-ing rounds. Direct replacement for popular factory screw-in tubes, so it eliminates the inconvenience of having to change the muzzle device for specific applications. Sharply crenelated muzzle provides the proper stand-off distance and secure grip on the surface for use as a breaching device. Won’t interfere with performance of buckshot, and preserves the downrange accuracy of slugs. Preci-sion machined from carbon steel, with a knurled surface for easy installation/removal, and a wear-resistant, non-glare black oxide finish. Remington fits Rem™ Choke. Win/Brng/Moss fits Win-Choke®, Browning Invector, and Mossberg 500. Benelli/Beretta fits Mobilchoke™ system. ab

TRULOCK CHOKES

TACTICAL CHOKE TUBEDelivers Excellent Performance

From A Variety Of Law Enforcement Ammo

#100-004-579AU Remington Choke Tube, 2C51G99� � � �$ 53.99#100-004-580AU Win/Brng/Moss Choke Tube,

2C51E99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 53.99#100-004-578AU Beretta/Benelli Choke Tube,

2C51A99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 53.99

SCREW-IN CHOKE INSTALLATION REQUIREMENTS

Before accepting a barrel for machining to accept screw-in chokes, you must measure the outside diameter (O.D.) to determine if there will be sufficient wall thickness after machining. “Mike” the O.D. of the barrel and the O.D. of the tap for the particular gauge. Subtract the O.D. of the tap from that of the barrel, divide by 2, and this will give the wall thickness after machining, providing the O.D. of the barrel is concentric with the inside diameter (I.D.). A sample calcula-tion appears below.

Barrel O.D. (12 Ga) .850"Tap O.D. (12 Ga) Win-Choke™ – .814"

.036" ÷ 2 = . 018" Wall Thickness

We DO NOT recommend installations in barrels where the resultant wall thickness will be less than .015", pro-viding the I.D. of the barrel is concentric with the O.D. If the I.D. is not concentric with the O.D., you will have to make your own decision as to whether the installa-tion will be safe. In addition, you CANNOT install screw-in chokes in barrels whose inside diameters (I.D.) exceed the following dimensions: 10 ga. - .780"; 12 ga. - .735"; 12 ga. Thinwall - .728"; 16 ga. - .666"; 20 ga. - .624". Ex-ceeding these dimensions WILL CAUSE DAMAGED CHOKE TUBES and there is a GREAT POSSIBILITY OF CAUSING A BARREL BLOW-OUT! Check EVERY installation before fir-ing to make sure the tube does not protrude into the bore. Back-bored or jug-choked barrels are usually NOT suitable for screw-in choke installation.

Large, dome-shaped button is quick to locate. Just a quick push with the side of your trigger finger will disengage the safety. Round profile does not snag clothing or guncase liner. Drop-in installation, right-hand use only. abSPECS: Steel, blue, polished finish. .960" (24.4mm) long. Head - .350" tall (8.9mm .433" (11mm) diameter.

VANG COMP SYSTEMS REM 870/1100/11-87

BIG SPEED SAFETYEasy-To-Locate, Quick-To-Disengage

#100-000-569AU Big Speed Safety, 6K11F99 � � � � � � � � � $ 12.99

Three choke set helps you configure your shotgun to match your shooting conditions. Stain-less steel chokes feature long par-allel internal sections that throw tight, consistent patterns to help

you bag more birds. Laser marked on end and body for easy identi-fication and knurled for quick installation —just screw in the choke that matches your hunting situation. Close-Range choke is ideal for shooting over decoys out to 30 yards. Mid-Range choke is best for 25 to 40 yard shots. Long-Range choke designed for shots 40 yards and beyond. Chokes accept steel shot up to size BB, at velocities less than 1550 fps. Padded hard case fits into your pocket and keeps chokes handy in the field. Available in 12 gauge only, for several dif-ferent shotgun makes and models. abSPECS: 1704 stainless steel, matte black finish. Chokes extend ¾" beyond muzzle.

CARLSON’S

WATERFOWL CHOKE TUBE SETHelps Knock Down Ducks &

Geese At Any Range

STOCK # FITS PRICE#155-000-203AU Most Beretta & Benelli 5E95A66 $ 104.99#155-000-204AU Most Remington 5E95I66 $ 104.99#155-000-205AU Browning Invector Plus 5E95M66 $ 104.99#155-000-206AU Browning Invector, Mossberg 500,

Savage, Weatherby, Winchester5E94J56 $ 104.99

High quality, interchange-able tubes not only improve pattern density but vent exiting bar-rel gases to reduce felt recoil and muzzle lift. Helps keep the bar-rel down and the front bead on target for a faster follow-up shot. Knurled end makes installation/removal easy. Use only with lead shot; 12 ga. only. abSPECS: E.D.T. steel, blue, matte finish. 31/2" (8.8cm) long. For use with lead shot only. 12 ga. only. Available to fit Tru-Choke™ Style Tru-Tube - .795"-44 tpi., Rem™ Choke - .812"-32 tpi.

COLONIAL ARMS

“ELITE” PORTED CHOKE TUBEReduces Recoil & Shoulder

Pain; Improves Pattern Density

STK# TRU-TUBE STK# REM CHOKE CHOKE#198-050-004AU #198-053-004AU Mod#198-050-006AU #198-053-006AU Full

NA #198-053-003AU Imp CylNA #198-053-005AU Imp Mod

— Advise # — Elite Ported Choke Tube, 8A34N99 � � � � $ 39.99

Beautifully made tubes with an ex-tremely smooth inside finish and an under-cut, tube-to-barrel joint to minimize shot and wad fouling buildup. Both Win-Choke® and Tru-Choke™ tubes are “invisible” style, no unsightly “knob” sticks out. And, they can’t rust; they are stainless steel. Install/remove with a quarter. For use with lead shot only! abSPECS: Approximately 11/2" (3.8cm) long. Stainless steel. Threads are as follows - Win-Choke® 12 ga. are .812"-32 tpi, 20 ga. are .687"-32 tpi; Tru-Tube 12 ga. are .795"-44, 20 ga. are .675"-44; Tru-Choke™-style Thinwall are .774"-44.

STK# TRU-TUBE STK# THINWALL GAUGE CHOKE#198-112-730AU #198-212-730AU 12 Skt-1#198-112-725AU #198-212-725AU 12 Imp Cyl#198-112-715AU #198-212-715AU 12 Mod#198-112-705AU #198-212-705AU 12 Full#198-112-700AU #198-212-700AU 12 X-Full#198-120-620AU NA 20 Imp Cyl#198-120-610AU NA 20 Mod#198-120-600AU NA 20 Full

NA #198-212-710AU 12 Imp Mod

— Advise # — 12/20 Ga. Tru-Tube, 8A13F99 � � � � � � � � � � � $ 17.99— Advise # — 12 Ga. Thinwall, 8A15I99 � � � � � � � � � � � � � � � 24.99

COLONIAL ARMS

SCREW-IN CHOKE TUBE“Invisible” Replacement Tubes For Popular Screw-In Choke Systems

STOCK # GA. CHOKE PRICE#198-012-730AU 12 Skt-1 8A13A99 $ 18.99#198-012-725AU 12 Imp Cyl 8A13I99 $ 14.99#198-012-715AU 12 Mod 8A13H99 $ 14.99#198-012-705AU 12 Full 8A13B99 $ 14.99#198-012-700AU 12 X-Full 8A13Q99 $ 17.99#198-020-595AU 20 Mod 8A12M99 $ 15.99#198-020-585AU 20 Full 8A13F99 $ 14.99

Specifically made for the Kel-Tec KSG shotgun, the Enforcer’s four tapered points lets the shotgun be repositioned when performing breaching operations. Solid steel muzzle device comes with four open slots to help reduce muzzle flash. Knurled exterior allows for simple installation and removal without indexing. Fits 12 ga. KSG shotguns only. abSPECS: Steel, matte black. 2 (5.1cm) OAL. 4 oz. (113.4g) wt.

Designed For Breaching & Close Quarter Combat

#100-009-651AU KSG Enforcer, 2Z47B28 � � � � � � � � � � � � � �$ 53.99

DOUBLE STAR

KSG ENFORCER

Machined steel, extended tactical choke with large diameter bore provides extra wide patterns at close range for home defense or CQB operations. Features a serrated, saw-tooth tip that holds tight against locks and hinges to prevent the muzzle from sliding during forced entry operation. Twelve, equally spaced ports redirect combustion gases to reduce felt recoil and prevent barrel damage when used for forced entry. Knurled gripping surface makes it easy to install and remove the choke without special tools. Precision machined from 1704 stainless steel for maximum strength, then treated with a manganese phosphate finish for improved wear resistance. Models available for Mossberg 835/935, Winchester/ Savage/Browning Invector/Weatherby/Mossberg 500, Remington, and Beretta/Benelli shotguns,12 gauge only. Can be used with lead, buckshot, hevishot, or steel shot without damage. abSPECS: 1704 stainless steel, manganese phosphate finish, matte black. Fits 12 gauge only.

CARLSON’S

TACTICAL BREACHER CHOKEProvides An Extra Wide

Shot Pattern; Serrated Tip Aids In Door Breeching

STOCK # FITS PRICE#155-000-098AU Mossberg 835/935 5E40K99 $ 45.99#155-000-099AU Winchester/Savage Browning

Invector/Wthrby Mossberg 5005E40F99 $ 45.99

#155-000-100AU Remington 5E40I99 $ 45.99#155-000-101AU Beretta/Benelli 5E40F99 $ 45.99

PE

RFO

RM

AN

CE

PA

RT

S

SHO

TG

UN

PAGE 201Orders: 800-741-0015order on the web

brownells.com

Oversized replacement for factory cocking handle is shaped for comfort and fast, easy operation to help you bring your Beretta or Benelli 12-gauge semi-auto shotgun into action quickly. Precision machined from high-grade aluminum or stainless steel billet for strength, durability, and corrosion resistance. Durable black finish matches your gun’s bluing. abSPECS: Stainless steel, matte black finish. Fits 12 ga. only.

BALLISTIC SPECIALTIES BENELLI SHOTGUN

EXTENDED COCKING HANDLEEasy, Fast Operation Of Bolt

Without Abrading Hand

Benelli

#100-003-683AU Benelli Handle, 8K22E99 � � � � � � � � � � � $ 39.99

Extra long, easy-to-grasp bolt handle allows fast, positive cy-cling during tactical operations. Contoured, hour-glass shape provides increased leverage when clearing the action. No modi-fication required, drop-in fit. Models for Benelli SBE/M3, Beretta 303/390/391, Browning Gold, and Remington 1100/11-87. Fits 12 gauge only. abSPECS: Stainless steel, black, oxide finish. Handle - .96" (24mm) long x .5" (12.7mm) diameter.

BRILEY TACTICAL SHOTGUN

BOLT HANDLEFor Fast, Easy Bolt Cycling

#129-000-257AU Benelli SBE/M3 Bolt Handle, 9B35B99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 44.99

#129-000-258AU Beretta 303/390/391 Bolt Handle, 9B35M99 � � � � � � � � � � � � � � � � � � � � � � � � � � 44.99

#129-000-259AU Browning Gold Bolt Handle, 9B35A99 � � � � � � � � � � � � � � � � � � � � � � � � � � 44.99

#129-000-260AU Rem. 1100/11-87 Bolt Handle, 9B41P99 � � � � � � � � � � � � � � � � � � � � � � � � � � 48.99

Increased size allows you to reach over the receiver and operate the bolt with your “off” hand without tak-ing your finger out of shooting position. Provides extra leverage to help clear a jammed chamber. Reverse contour and open center design gives better grip with gloved hands. Requires no alteration to gun. abSPECS: 4140 Steel, blued finish. Handle is 1.25" (3.1cm) high, 7/8" (22mm) wide. Fits Remington 1100, 11-87 only.

CHOATE COMBAT BOLT HANDLEExtra Wide, Extra Long Handle

Gives Positive Charging For The Remington 1100

#159-101-112AU Combat Bolt Handle, 9E9H99 � � � � � � � �$ 10.99

Ideal for law enforcement and competition. Large, extended knob provides a quick-to-grasp handle for rapid operation. Con-toured shape gives added leverage for very fast cycling and clearing the action. No modification required, drop-in fit for Remington 1100 and 11-87. abSPECS: 4140 steel, black oxide, matte finish. Knob: 3/4" (19mm) long, 5/8" (15.9mm) diameter.

DAVE’S METAL WORKS REMINGTON 1100/11-87

TACTICAL BOLT HANDLE

#260-000-001AU Remington Bolt Handle, 6B33L99 � � � $ 36.99

Quicker Chambering, Easier Bolt Racking

Oversized, easy to feel bolt release button allows quick access during high

stress situations when you need it most. Features a serrated face almost 11/4" long for a non-slip grip, with or without gloves. Con-structed of 4140 ordnance steel with a black manganese phosphate finish for durability. Fits Benelli M1 Super 90, M3 Super 90, and Model 121 law enforcement shotguns. abSPECS: Steel, black, matte finish. Button – 11/4" (3.2cm) long x 5/8" (1.6cm) high.1 oz. (28.4g) weight.

GG&G BENELLI BOLT RELEASE BUTTONOversized For Quick Operation

#336-000-006AU Bolt Release Button, 6C104J99 � � � � $ 109.99

Easy to install, oversized charging handle helps you clear misfeeds and eject a chambered round quickly and efficiently. Machined steel construction, with a distinctive tubular shape, and deep, corkscrew-pattern flutes give an excellent purchase and stylish look. No gun-smithing required. abSPECS: Steel, matte black finish. Benelli/Beretta fits Benelli M1/M2 and Beretta Extrema. Rem. fits Remington 1100 and 11-87. Win./FN fits Win-chester SX2, SX3, and FNH SLP.

NORDIC COMPONENTS

SHOTGUN SPEED BOLT HANDLEOversized, With Fluted Surface For

Fast Charging & Jam Clearance

#100-005-452AU Speed Bolt Handle, Benelli/Beretta, 1B31I43 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 33.99

#100-005-453AU Speed Bolt Handle, Rem. 1100/11-87, 1B25E61 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 29.95

#100-005-454AU Speed Bolt Hndle, Win./FN, 1B25I61 � � � 29.95

Stamped stainless steel tab quickly installs without gunsmith-

ing onto Benelli M1, M2 and Super Black Eagle shotguns to give large surface area for bolt release. Makes it easy to quickly activiate the bolt release while wearing gloves, or without looking at the release, important in action shooting sports. Fits under forend and retained by friction. ab

Simple-To-Install Tab Speeds Bolt Release

#100-013-938AU Benelli Rapid Bolt Release, 6C17M15 � � $ 18.99

RED NECK TACTICAL BENELLI M1/M2/SBE

RAPID BOLT RELEASE

Streamlined, stainless steel cocking handle features unique knurling and front serrations for a sure grip under all condi-tions. Perfect for 3-Gun or tactical opera-tions. abSPECS: Stainless steel, Ion Bond coating, silver finish. 2.2" overall length, 1" handle length.

#100-012-546AU Ultimate Charging Hndle, 7Z41N99 � � $ 46.99

TARAN TACTICAL INNOVATIONS BENELLI M1/M2

ULTIMATE CHARGING HANDLEIdeal For Tactical & 3-Gun Use

Jumbo size head with undercut grooves is drop-in replacement for the small factory button. Makes it easier to find and operate, even with gloves on. abSPECS: 4140 steel, hardened and blued, right-hand only. Fits Rem- ington: 7600, 7400, 6, 4, 48, 58, 552, 572, 740, 742, 760, 870, 1100, 11-48, 11-87, SPT-10, 12, 74, 76, with or without ISS safety.

SCATTERGUN TECHNOLOGIES

TACTICAL RESPONSE® JUMBO HEAD SAFETY

#800-100-002AU Jumbo Head Safety, 8Z16A99 � � � � � � � � $ 17.99

Easy-To-Find, Oversized Button For RemingtonSolid steel safety with oversized

head was originally designed for 3-gun and tactical gun shooters for fast and positive operation, even when wearing gloves. Also great for hunting, home de-

fense, and any other situation where seconds count. abSPECS: Stainless steel, black finish. Fits Benelli M1, M2, M3, M4, Super Black Eagle, Montefeltro, and Remington® Versa Max®.

TARAN TACTICAL INNOVATIONS BENELLI SHOTGUN

OVERSIZED SAFETY BUTTONDesigned For Faster Operation

#100-012-548AU Benelli Oversized Safety, 7Z23C99 � � �$ 31.99

Oversized, aluminum safety is larger than the factory part in every dimension to give your thumb more surface area for engagement. Taller height, wide back end and more pro-nounced steps give you more pushing leverage. abSPECS: Aluminum, black, anodized. Approximately 13/4" (4.4cm) long, 31/64" (12.3mm) wide, 17/64" (6.7mm) high.

VANG COMP SYSTEMS MOSSBERG 500/590

OVERSIZED SAFETYProvides Easier Safety Engagement

#100-001-364AU Moss. Oversized Safety, 6K31C99 � � � � �$ 35.99

ab

#260-100-101AU Large Bolt Handle, 6B33Q99 � � � � � � � � �$ 36.99

OVERSIZE SAFETY BUTTON - Easily disen-gages with firing hand trigger finger. Revers-ible for right- or left-hand use. Fits Benelli Super 90, 121M1 and Beretta 1200 shotguns, no modification to gun.SPECS: 4140 steel, black oxide finish. Head: .440" (11.1mm) dia-meter. .185" (4.7mm) high.#260-100-100AS Oversize Safety Button, 6B30N02 � � � $ 32.99

LARGE BOLT HANDLE - Quick-to-grasp for competition. Fits Benelli Super 90 and Beretta 1200 series, no alterations to gun.SPECS: 4140 steel, black oxide finish. Extends .900" (23mm). .68" (17.4mm) diameter.

DAVE’S METAL WORKS BENELLI/BERETTA

ACCESSORIES

ab

A genuine Mossberg replacement for the factory plastic part made to their specs from tough, durable aluminum. Won’t fail when you really need it. Drops right in with no modification to the receiver or the detent settings. Kit includes the same metal safety button, plus all the other parts of the safety, so you can replace everything at the same time to ensure smooth, positive, reliable operation of this critical part. Safety button screw also available separately, so you don’t have to buy a the entire kit if the screw gets damaged during installation. abSPECS: Button - Aluminum, black. 1.19" (30mm) long, .30" (7.6mm) wide. May require minor fitting. Kit includes safety button, button screw, detent plate, detent ball, detent spring, and instructions.

Replace Factory Plastic With Genuine Factory Metal Button

#631-000-287AU Moss. 500 Safety Button, 1C20D99 � � �$ 22.99#080-000-563AU Moss. 500 Factory Metal Safety Kit,

8K32A99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 35.99#631-000-014AU Safety Button Screw, 1C5H99 � � � � � � � � 6.99

MOSSBERG MOSSBERG 500

METAL SAFETY BUTTON

Drop-in replacement for plastic factory button offers rugged, all-steel construction and a raised, crisply grooved ridge to give your thumb extra purchase for fast, “can’t miss” operation on the first try. Steps in the body are cut deeper than original part for additional grab even with wet hands or when wearing gloves. Reversible design allows shooters with small-to medium-size hands to position the thumb ridge farther back to help them operate the safety without having to break their grip; shooters with large hands can place the ridge forward to give them more room. Precision machined from 4140 steel, heat-treated for extra hardness and wear resistance, with a durable, matte, black oxide finish. abSPECS: 4140 steel, oxide finish, matte black. Fits Mossberg 500/590/835 shotguns.

SAFETY KIT - Includes the Brownells Enhanced Safety Button and the other parts in the safety system that get worn, dinged up, or lost. Replace everything at the same time to ensure smooth, posi-tive, reliable operation of this critical component. Safety button screw also sold separately, so you don’t have to buy a whole new kit if the screw gets dam-aged during installation.SPECS: Kit includes enhanced safety button, button screw, detent plate, detent ball, detent spring, and installation instructions. Fits Mossberg 500/590/835 shotguns.#080-000-564AU Moss. 500 Enhanced Safety Kit,

8K36J99 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 39.99#631-000-014AU Safety Button Screw, 1C5H99 � � � � � � � � 6.99

MOSSBERG 500/590/835

ENHANCED SAFETY BUTTONShaped For Easy, No-Slip Operation; Made From Hardened Steel To Last

#080-000-539AU Moss. 500 Safety Button, 8K17J99 � � � �$ 19.99

ab

Getting a solid grasp on a Benelli M-series shotgun's small factory bolt handle can be difficult, but you won’t have that problem with the GG&G Slotted Tactical Charging Handle. This oversized handle is easy to grab, and the heavy knurl-ing reduces the chance of your hand slipping off, even when wet or wearing gloves. It ensures consistent, reliable hand-cycling of the bolt, while the rounded edges ensure snag-free operation. Even better, installation is a fast, easy, drop-in process. And the handle is manufactured from hardened (Rockwell "C" 45) 4140 steel, so it WILL NOT give out on you when the heat is on. Durable, non-reflective matte black manganese phosphate Parkerized finish. As a bonus, its good looks add a bit of "cool factor" to your Benelli. Separate models for M1/M2/M3 and the M4. ab

GG&G BENELLI M1/M2/M3/M4

TACTICAL CHARGING HANDLEExtra-Large Grasping Surface for Rapid Charging & Jam Clearance

#336-000-071AU Benelli M4 Charging Handle, 6C00QLD � � � � � � � � � � � � � � � � � � � � � � � � � $ 46.99

#336-000-072AU Benelli M1/M2/M3 Charging Handle, 6C00ETR � � � � � � � � � � � � � � � � � � � � � � � � � � 46.99

PE

RFO

RM

AN

CE

PA

RT

S

PAGE 202 Office/Tech: 641-623-5401GUARANTEED. FOREVER.

SINCE 1939

SHO

TG

UN

RE

PL

AC

EM

EN

T P

AR

TS

High-grade silicone rubber O-rings replace old, worn, or cracked rings to provide a proper seal and restore gas

system reliability. Fits a wide variety of 12- and 20-gauge shotguns. 20-gauge rings will fit many 28 gauge shotguns, too. abSPECS: Rubber, black. Fits Remington 1100/11-87, Beretta, Winchester, Franchi, Charles Daly, Tri-Star, EAA, and others. Kit contains (4) 12 gauge rings and (2) 20 gauge rings.

CARLSON’S SEMI-AUTO SHOTGUN

GAS O-RING REPLACEMENT PAKReplace Worn Out O-Rings To Help

Restore Proper Gas System Function

#155-000-102AU Gas O-Ring Pak, 5E8B99 � � � � � � � � � � $ 9.99

Extra long, easy-to-reach bolt release lever replaces the original factory button for fast, painless reloading during combat or compe-tition. Made of aluminum, then is hardcoat anodized for durability; includes a diamond pattern, textured face for a non-slip grip. High strength, steel cartridge latch is titanium nitride coated for superior wear resistance. Fits Beretta 301/302/303/390/391/3901/A400 Xplor/Xtrema/Xtrema2, 12 and 20 gauge shotguns. abSPECS: Lever - Aluminum, black, anodized finish. Cartridge Latch - Steel, gold, titanium nitride finish. Lever - 13/64" (2.6cm) long x 7/16" (1.1cm) wide. .3 oz. (8.5g) weight.

BRILEY BERETTA

EZ BOLT RELEASE LEVERExtra Long For Quick, Easy Access

#129-000-256AU EZ Bolt Release, 9B54H99 � � � � � � � � � � $ 70.99

Easy-to-hit lever release has a wide, flat paddle that reduces the effort

needed to close the bolt, allowing for faster reloads while hunting or competition shooting. A real advantage for those wearing gloves or who have difficulty pushing the standard button style bolt closer. Professional gunsmithing may be required for installation. abSPECS: CNC machined 17-4 stainless steel, 1.3” (3.3cm) long, 3” (.76cm) wide.

POWER CUSTOM BERETTA 390/391

COMPETITION BOLT RELEASELarge Paddle Release Allows For

Faster Reloads

#713-000-161AU Competition Bolt Release, 3A78P99 � � $ 111.99

Oversized bolt release button is the perfect size for competition but still small enough to stay out of the way on a tactical or defensive shotgun. Easy-to-hit, large pad helps you get the gun back into action quickly when seconds count. Gun-smith installation recommended. Drilling and tapping required. abSPECS: Aircraft-grade aluminum, hard-anodized, matte black finish. 1" (2.54cm) long, 9/16" (1.43cm) wide, 5/32" (.4cm) thick. Requires drilling and tapping for installation.

The Right Size For Defense Or Competition

#100-012-547AU Oversized Bolt Release, 7Z27Q99 � � � �$ 29.99

TARAN TACTICAL INNOVATIONS BENELLI SHOTGUN

OVERSIZED BOLT RELEASEAmbidextrous, extended magazine

release enables lightning-quick reloads without your shotgun ever leaving your shoulder. Press the release with your trigger finger while keeping your hand wrapped around the pistol grip, and change maga-zines with your opposite hand—all in one

motion. Precision laser-cut from heavy-duty, 16 gauge sheet steel and powder coated for durability. Drop-in installation using the factory mag release pin and spring. Some guns may require minor fitting, following the included instructions. abSPECS: Steel, powder coated, black finish. 13/8" (3.5cm) wide. Includes mounting hardware.

For Fast Reloads In The Ready Position

#100-005-300AU Saiga 12 Ext. Mag Release, 3Z23I99 � � �$ 38.99

RAM SUPERIOR FIREARM SOLUTIONS SAIGA 12

EXTENDED MAGAZINE RELEASE

Stainless steel extended carrier drops into Benelli semi-automat-ic shotguns and provides extended rails on both sides that help per-fectly center the shell during the reload. Helps make reloading fast and easy and protects your thumb against cuts and abrasions. Installs quickly and elminates the need to weld together a custom carrier. abSPECS: SAE 304 Stainless steel. Fits Benelli M1/M2/M3/SBE and Rem-ington Versamax.

Eases Loading And Helps Increase Speed For Competition

#100-015-582AU Benelli Accuguide Extended Carrier, 7Z70B99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 92.99

TARAN TACTICAL INNOVATIONS

BENELLI ACCUGUIDE EXTENDED CARRIER

Drop-in kit replaces origi-nal factory sear and spring for a smoother, lighter, fully adjustable trigger pull that helps you shoot more accurately. Comes with three different weight springs to lower the heavy factory trigger pull to a comfortable 2, 3, or 4 lbs., then fine-tune the pull with the adjust-ment screw using the included hex-head wrench. Springs are color-coded for easy identification. abSPECS: Steel sear. Includes 2 lb. (blue), 3 lb. (white), and 4 lb. (red) springs, plus hex-head wrench. Fits Remington 870, 1100, and 11-87 shotguns, all gauges. Also fits 740, 742, 760, 7400, and 7600 rifles.

TIMNEY TRIGGERS REM 870/1100/11-87

TRIGGER FIXFor A Light, Smooth,

Adjustable Trigger Pull

#883-000-022AU Rem Trigger Fix, 3H94J00 � � � � � � � � � � $ 94.99

Eliminates pin drift in the receiver holes so your trigger housing stays in the same place for every shot. Slotted, truss head screws at each end of pin keeps trigger housing properly aligned and free of wobble. Helps deliver reliable trigger performance in tactical and competition guns. Remington includes both front and rear, anti-walk trigger pins. abSPECS: Steel, blued finish. Remington - Fits Remington 870/1100/11-87. Mossberg - Fits Mossberg 500/590. Winchester - Fits Winchester 1200/1300/1400. Benelli - Fits Benelli Super 90, Winchester Super X and Browning Gold.

SHOTGUN

ANTI-WALK TRIGGER HOUSING PINPrevents Pin & Housing Movement

For Repeatable Trigger Performance

#078-000-048AU Remington Anti-Walk Trigger Pins, 8G14A99 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 15.99

#078-000-049AU Mossberg Anti-Walk Trigger Pin, 8G6P99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7.99

#078-000-050AU Winchester Anti-Walk Trigger Pin, 8G6A99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7.99

#078-000-051AU Benelli Anti-Walk Trigger Pin, 8G6A99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7.99

#078-000-057AU Replacement Screws pair, 8G1G99 � � � 2.99

Stainless steel recoil spring system solves cycling problems caused by recoil system rust and corrosion; completely impervious to salt water, humidity and rain. Precision machined to exacting tol-erances; reliably cycles all loads, including magnum and light target loads. Provides an increase in the cyclic rate that lets you get those second and third shots off fast. Operates dry; requires no lubes or oils that can harden and slow down action in cold weather. Installs easily without modifications to gun. abSPECS: Stainless steel. Approx. 91/2" (24cm) long. Benelli SBE/ SBE II fits Benelli SBE, SBE II, M1 Super 90, above s/n 155400, and Montefeltro 12 and 20 ga. Benelli SBE 12 ga. 21 mm fits Benelli SBE12 ga. after s/n 185000 and Super 90 above s/n 470000 with 21 mm threads. Benelli M1 fits M1 Super 90 and Montefeltro before s/n 155400. Beretta AL 390 fits AL390, A390 and N391, 12 and 20 ga. Remington 1100/11-87 fits 12 and 20 ga.

SRM PERFORMANCE SURE CYCLE

Improves Auto Shotgun Reliability & Performance

STOCK # FITS PRICE#100-000-067AU Benelli SBE/SBE II 1K139I99 $ 213.99#100-000-912AU Benelli SBE 12 ga. 21mm 1K125K99 $ 209.99#100-000-068AU Benelli M1 1K125D99 $ 213.99#100-000-069AU Beretta AL390, 391 1K125H99 $ 213.99#100-000-071AU Beretta Pintail 1K125P99 $ 213.99#100-000-216AU Remington 1100/11-87 1K57Q99 $ 91.99#100-000-075AU Win Super X2, 12 ga. 1K138Q99 $ 211.99

Upgraded replacement for factory piston is machined from hardened 17-4 PH stainless steel bar stock to stand up to the rigors of high-volume shooting without breakage. Tight dimensional tolerances and polished exterior help ensure smooth, reliable function of this critical part for consistent gas system opera-tion and efficient cycling. Drop-in installation: simply remove the end cap and forearm, slip off the factory gas piston, and slip on the Ballistic Specialties piston in its place before reinstalling the forearm and cap. Separate models for 12 and 20 gauge. abSPECS: Stainless steel, natural finish. Fits Beretta 391 shotgun.

BALLISTIC SPECIALTIES BERETTA 391

GAS PISTONDelivers Consistent,

Reliable Gas System Function

#100-003-676AU Beretta 391 Gas Piston, 12 Ga., 8K38C99 � � $ 54.99#100-003-677AU Beretta 391 Gas Piston, 20 Ga., 8K38E99 � � 54.99

Thicker-than-factory replacement de-creases the amount of play in the latch body to improve feeding and ensure positive operation. Available in three different thicknesses. abSPECS: Steel, black oxide, matte finish. .025"

(.64mm), .030"(.76mm), or .035" (.89mm) thick.

REMINGTON 1100/11-87

INTERCEPTOR LATCH RETAINEROversized To Minimize Latch Wobble

#080-000-156AU .025" Int. Latch Retainer, 8K1J99 � � � � � �$ 2.99#080-000-157AU .030" Int. Latch Retainer, 8K1Q99 � � � � � 2.99#080-000-158AU .035" Int. Latch Retainer, 8K1H99 � � � � � � 2.99#080-000-159AU 3-Pak Int. Latch Retainer, 8K5F99 � � � � � 8.99

Don’t get caught short or let a broken shotgun ruin your hunt. Convenient, pre-pack-aged kits contain the parts most often required for emergency, field repairs. All parts are Remington, Mossberg and Winchester Factory, tagged with the Brownells stock number, and current factory parts number. abSPECS: Kits contain one each of parts listed unless noted.

REMINGTON 11-87 - Firing pin, firing pin spring, firing pin retaining pin, bolt buffer, right-hand extractor, extractor plunger, extractor spring, operating handle, barrel seal, front and rear trigger plate pins. Fits 12 ga. only.#080-938-000AU 11-87 Field Repair Kit, 8K75N99 � � � � � �$ 79.99

REMINGTON 1100 - Firing pin, firing pin spring, firing pin retaining pin, breech bolt buffer, bolt buffer, extractor, extractor plunger, extractor spring, barrel seal, front and rear trigger detent springs, operating handle. Fits 12 ga. only.#080-937-000AU 1100 Field Repair Kit, 8K80Q99 � � � � � $ 84.99

REMINGTON 1100/11-87 PISTON/SEAL FIELD SERVICE KIT - Two barrel seals, one piston and one piston seal. Fits all 12 ga., plus large-frame 16/20 ga. guns with X or N in serial number.#080-936-000AU 1100/11-87 Piston Field Service Kit,

8K31B99 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 32.99

REMINGTON 870 - Firing pin, firing pin spring, firing pin retaining pin, 12/16/20 gauge extractor, extractor plunger, extractor spring, magazine spring retainer (old style), magazine spring retainer (new style), front and rear trigger detent springs.#080-935-000AU 870 Field Repair Kit, 8K70N99� � � � � � � �$ 74.99

PUMP & SEMI-AUTO SHOTGUN

FIELD REPAIR KITMake Your Field Repairs With

Genuine Factory Parts

Upgraded extractor is EDM cut from high-grade tool steel that's been hardened to Rc 58-60, maintaining your Remington's reliable

and dependable function. Cut to tolerances of +/-.0001" with a very precise hook point, and the edges won't get dull and "roll off" with hard use to cause extraction problems, like inferior stamped steel extractors. Drop-in replacement for factory part. abSPECS: A2 tool steel, hardened to Rc 58-60. Fits both Remington 870 and 1100 chambered for 12 or 20 gauge. #930-000-144AU Rem 870/1100 Exact Edge Ext., 3Z19J99 � �$ 21.99

An Inexpensive Upgrade For Smooth Function & Long-Term Reliability

VOLQUARTSEN REMINGTON 870/1100

EXACT EDGE EXTRACTOR

Plastic, oversized bar gives you a large area to hit for fast release of the carrier in Benelli semi-auto shotguns. Speeds up the reloading process. Bar mounts to existing release button and requires drilling and tapping button. abSPECS: Plastic, black. 17/8" (47.5mm) long, 9/16" (14.2mm) wide, 1/4" (6.3mm) high. Screw included. Gunsmith installation recommended.

ARRENDONDO BENELLI

CARRIER RELEASE BAROversized For Quick Release

#069-000-015AU Carrier Release Bar, Benelli, 9F19Q99 � � $ 21.99

PE

RFO

RM

AN

CE

PA

RT

S

PAGE 203Orders: 800-741-0015order on the web

brownells.com

SHO

TG

UN

RE

PL

AC

EM

EN

T P

AR

TS

Don’t let rusted, broken or badly carboned-up gas pistons and seals keep your 1100 or 11-87 from work-ing its best. Long-lasting, stainless steel and Teflon replacement for factory gas system parts. abSPECS: Teflon barrel seal, stainless steel gas piston and piston seal. Kit contains piston, piston seal and barrel seal.

NU-LINE REMINGTON 1100/11-87

GAS SYSTEM PARTSRestores Function & Reliability

#655-110-003AU 12 Ga. Gas Piston, 5E8J99 � � � � � � � � � � � $ 11.99#655-110-002AU 12 Ga. Piston Seal, 5E7M99 � � � � � � � � � � 9.99#655-110-000AU 12 Ga. Gas System Kit, 5E16L99 � � � � � � 25.99#655-110-001AU 12 Ga. Barrel Seal, 1-pak, 5E2F99 � � � � � 4.99#655-110-004AU 12 Ga. Barrel Seal, 10-pak, 5E14F99 � � � 25.99#655-110-005AU 12 Ga. Barrel Seal, 25-pak, 5E27A99 � � � 46.99#655-000-002AU 20 Ga. Barrel Seal, 4-pak, 5E6G99 � � � � 11.99#655-110-007AU 20 Ga. Barrel Seal, 10-pak, 5E13L99 � � � 22.99

These high-quality O-rings are perfect for replacing old,

cracked or worn O-rings in your 12 gauge 1100/11-87 Remington. Restores the airtight seal on your semi-auto so the gas system will function efficiently and reliably. Also works with other shotguns that use an O-Ring barrel seal such as: Pro Bore Guns, G-3 models, Beretta shotguns, Franchi shotguns, Winchester shotguns, Charles Daly shotguns, Tri Star shotguns, EAA shotguns and many others. Available in packs of 3, 10 and 25. abSPECS: Rubber, graphite-coated O-rings. Fits 12 gauge Remington 1100/11-87 and other shotguns that use an O-ring barrel seal.

REMINGTON 1100/11-87

GAS O-RING PAKS Graphite-Coated For Lasting

Performance

#080-155-003AU Gas O-Ring, 3-Pak, 8K5P99 � � � � � � � � � � �$ 6.99#080-155-010AU Gas O-Ring, 10-Pak, 8K14A99 � � � � � � � � � 15.99#080-155-025AU Gas O-Ring, 25-Pak, 8K30E99 � � � � � � � � � 34.99

Factory components replace worn out, carboned-up factory gas system components to restore the reliability and performance of your shotgun. Includes corrosion-resistant, 300 series stainless steel piston and piston seal, plus Teflon coated barrel seal for dura-bility and long service life. Drop-in, long-lasting replacement parts require no gunsmithing. Installation instructions included. abSPECS: Teflon barrel seal, stainless steel gas piston and piston seal. Kit contains piston, piston seal, and barrel seal. Fits 12 gauge Remington 1100/11-87 only.

REMINGTON 1100/11-87

GAS SYSTEM KITReplacement Piston, Piston

Seal & Barrel Seal To Maintain Performance, Cycling & Reliability

#767-000-930AU Rem 1100/11-87 Gas System Kit , 7F26J99 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 28.99

Remington factory gas system seals keep 1100s and 11-87s functioning their best. Available for 12 and 20 gauge models in a single pak and money-saving six and twelve paks. abSPECS: Teflon seal.

REMINGTON 1100/11-87

BARREL SEALSImprove Reliability & Function

#767-158-990AU 12 Gauge Bbl Seal, 1-pak, 7F6G99 � � � � $ 7.99#078-000-014AU 12 Gauge Bbl Seal, 6-pak, 8G35G99 � � 39.99#078-000-015AU 12 Gauge Bbl Seal, 12-pak, 8G68B99 � � 76.99#767-144-370AU 20 Gauge Bbl Seal, 1-pak, 7F6E99 � � � � 7.99#078-000-016AU 20 Gauge Bbl Seal, 6-pak, 8G35D99 � � 37.99#078-000-017AU 20 Gauge Bbl Seal, 12-pak, 8G69N99 � � 76.99

Steel piston and piston seal replaces worn parts for proper functioning and reliability. Drop-in, long-lasting factory replacement part requires no gunsmithing and comes with factory installation instructions. abSPECS: Steel. Installation instructions included.

REMINGTON 1100/11-87

PISTON & PISTON SEAL ASSEMBLYFactory Replacement Part Keeps Your

Semi-Auto Functioning

#767-200-295AU Piston/Piston Seal Assembly, 7F19B99 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 20.99

Ready for installation by gunsmith. Precision workmanship. Duplicates original. Saves waiting for, or having to make, one. abSPECS: Heat treated steel, blued. Fits Winchester Model 12 chambered in 12 gauge only. Gunsmith fitting may be required.

GLEND ARMS WINCHESTER MODEL 12

FIRING PINPrecision-Made -

Duplicates Original

#350-100-102AU Win. Mod. 12 Firing Pin, 5C23I99 � � � � $ 24.99

Takes care of most single and double barrel firing pin replace-ments. abSPECS: Kit contains 25 firing pins; 5 each of 5 styles, plus 5 rebound springs.

WILLIAMS FIRING PIN KITDoes Many Singles & Doubles

#962-500-000AU Firing Pin Kit, 2F72P99 � � � � � � � � � � � � � �$ 76.99#962-500-001AU Style 1 Firing Pin, each, 2F7B99 � � � � � � � 8.99#084-000-165AU Rebound Sprngs, 3-pak, 4H8J99 � � � � � 10.99

STYLE FITS1 Stev. 94B-C, 107B-C, 94BT, 107BT;Sav./Stev Sgls.2 Obsolete Stevens Single Barrel3 Iver Johnson Champion/Western Field Sgls.4 Fox “B” Stevens 515, 315, 530, 530A, 311, 311A, 311T, 530A5 H&R 48; Sears/Wards Singles made by H&R

Smoothbore 181/2" barrels quickly convert a Remington 870 or Benelli Nova/SuperNova into a fast-handling slug gun or home de-fense shotgun. Features chrome-lined bore and Carlson cylinder-bore choke tube installed. Remington 870 barrels are threaded for standard Rem Choke and have 3" chambers. Does not fit 870 Tac-tical models. #155-000-253 has rifled bore. Benelli barrels have 31/2" chambers and are threaded for Benelli Mobil choke. Both are available with a choice of ramped blade front sight only or adjustable front/rear rifle sights. abSPECS: 4140 steel, bead-blasted, matte black finish. Chrome-lined bore. 181/2 (47cm) long. 3 lbs (1.3kg) wt.

CARLSON’S

REPLACEMENT SHOTGUN BARRELS

Converts Sporting Pump Shotgun Into A Slug Gun

STOCK # SIGHTS FITS PRICE#155-000-199AU Front Blade Remington 870 5E145D20 $ 151.50#155-000-200AU Rifle F/R Remington 870 5E177J68 $ 184.30#155-000-253AU Adj. Rifle F/R Remington 870 5E207J27 $ 230.95#155-000-201AU Front Blade Benelli Nova/

SuperNova5E184A68 $ 188.50

#155-000-202AU Rifle F/R Benelli Nova/SuperNova

5E215G94 $ 220.50

High quality vent rib replacement barrels for Remington 870 and Benelli Nova shotguns. Barrels are made from certified ordinance grade 4140 steel, with chrome lined bores and a satin matte blue finish. Red fluorescent front sight includes a brass center bead. Each barrel comes with a Carlson modified choke tube, manufactured from 17-4 stainless steel. Remington 870 barrels are threaded for the standard Rem Choke system. Benelli barrels are threaded for the Benelli Mobil choke style system. Barrels are available for 12ga only.SPECS: 4140 steel, chrome lined bores, satin matte blue finish. Red fluo-rescent front sight , brass center bead.

CARLSON’S

REPLACEMENT VENT RIB SHOTGUN BARRELS

Enhance The Versatility Of Your Shotgun

STOCK # FITS LGTH CHAMBER CHOKE PRICE#155-000-213AU Rem 870 24" 3" Mod. 5E167H79 $ 173.99#155-000-214AU Rem 870 26" 3" Mod. 5E167I78 $ 173.99#155-000-215AU Rem 870 28" 3" Mod. 5E167H78 $ 173.99#155-000-216AU Nova 24" 3.5" Mod. 5E236P99$ 247.99#155-000-217AU Nova 26" 3.5" Mod. 5E236F99$ 247.99#155-000-218AU Nova 28" 3.5" Mod. 5E236D99$ 247.99

Precision machined from stain-less steel and heat treated for long life. Much improved over the factory. abSPECS: Stainless steel. Rc 45-50. Includes upper and lower pin and 2 springs. 12 and 20 ga. Will fit Classic Doubles.

NU-LINE WINCHESTER 101

FIRING PIN SETBetter-Than-Factory

#655-101-000AU 12 Gauge 101 FP Set, 5E38E99 � � � � � � �$ 63.99#655-101-100AU 20 Gauge 101 FP Set, 5E33G99 � � � � � � � 63.99

Genuine factory replacement barrels let you pick the barrels you need. Choose short or long, smoothbore or rifled, bead, rifle sights or integral scope base, even a ported barrel that takes the kick out of heavy duck and goose loads. All with the full assurance of Mossberg quality.SPECS: Steel. Finish: Blue (B), Matte Blue (MB), Extras: Vent Rib (VR). Ported (PR) Rifled Bore (RB). Choke: Cylinder (C), Sights: Rifle Sight (RS), Plain Bead (PB). Integral Scope Base (ISB). Accu-Mag is choke set for turkey and waterfowl.

MOSSBERG

REPLACEMENT SHOTGUN BARRELS

Mossberg Factory Barrels Give Factory Fit & Finish

STOCK # LENGTH/GA./STYLE PRICE

500 AND MAVERICK BARRELS

#631-000-302AU 28" 12 Ga., B, VR, PR 1C249L99 $ 267.99#631-000-307AU 26" 20 Ga., B, VR 1C228Q99 $ 247.99#631-000-364AU 24" 20 Ga. B, RS 1C170A99 $ 185.99#631-000-314AU 20" 12 Ga., B, RS, C, 8 shot 1C141Q99 $ 167.99#631-000-358AU 20" 12 Ga. B, VR, PB 1C217E99 $ 234.99#631-000-306AU 18.5" 12 Ga., B, PB, C 1C114B99 $ 123.99

MOSSBERG 835 BARRELS

#631-000-355AU 28" 12 Ga. MB, VR, PR, Accu-Mag

1C228F99 $ 245.99

#631-000-354AU 24" 12 Ga. B, RS, PR 1C200G99 $ 214.99#631-000-362AU 24" 12 Ga. B, RS, PR 1C150C99 $ 161.99#631-000-361AU 24" 12 Ga. B, RB, ISB 1C205H99 $ 219.99#631-000-356AU 24" 12 Ga. MB, RB, PR, ISB 1C238B99 $ 257.99

MOSSBERG 935 BARRELS

#631-000-352AU 24" 12 Ga. MB, RB, RS 1C277Q99 $ 310.99#631-000-353AU 24" 12 Ga. MB, RB, ISB 1C271P99 $ 288.99

MOSSBERG 930 BARRELS

#631-000-359AU 18.5" 12 Ga. MB, PB 1C125B99 $ 135.99#631-000-350AU 18.5" 12 Ga. MB, PB 1C184A99 $ 198.99

Compact, 181/2" long factory barrels feature a tough-looking, crenelated muzzle that serves as a self-defense tool and a door breaching device for law enforcement/military personnel. Perma-nent cylinder bore, chambered for 3" shells – buckshot or slugs. Fiber optic red-dot front sight.SPECS: Steel, matte blued (MB) or semi-gloss blued (SGB) finish. 181/2" long when installed. 12 gauge only. 3" chamber. Not threaded for choke tubes.

Gives Your Shotgun An Integrated “Breacher” Muzzle Device & Self-

Defense Tool

#631-000-338AU Moss 500 Standoff Barrel, MB, 1C180G99 � � � � � � � � � � � � � � � � � � � � � � � � �$ 193.99

#631-000-360AU Moss 500 Standoff Barrel, SGB, 1C167G99 � � � � � � � � � � � � � � � � � � � � � � � � � 180.99

#631-000-357AU Moss 930 Standoff Barrel, MB, 1C237F99 � � � � � � � � � � � � � � � � � � � � � � � � � 254.99

MOSSBERG 500/930

STANDOFF BARREL

An impossible to get factory part that’s nec-essary to keep that 37A shooting. Locates the forearm on the barrel and keeps the barrel from coming off. abSPECS: Plastic, black.

NU-LINE GUNS WINCHESTER

37A FOREARM SPACERRestore Your 37A To Shooting Condition

#655-003-037AU 37A Forearm Spacer, 5E15D99 � � � � � � � $ 17.99

PAGE 204 Office/Tech: 641-623-5401GUARANTEED. FOREVER.

SINCE 1939

SHO

TG

UN

RE

PL

AC

EM

EN

T P

AR

TS

Lightweight, molded polymer magazine has rein-forced steel feed lips to ensure reliable delivery of all 10 rounds to the chamber of your 12 gauge Saiga shot-gun. Ideal for the three-gun competition shooter, with deep, “waffle” texturing on the outside for a secure grasp during high-speed mag changes. Extra length ensures that even when fully loaded there’s extra com-pressibility to the round stack so the magazine can be inserted with the bolt closed. abSPECS: Reinforced injection-molded polymer, black. 10-round capacity. Fits Saiga 12 gauge shotguns only.

PRO MAG SAIGA-12

10-ROUND MAGAZINELightweight & Reliable-Feeding,

Ideal For Competition

#687-000-029AU Saiga-12 Magazine, 7H30K99 � � � � � � � $ 32.99

High-capacity drum magazines are great for three-gun competition—fewer mag changes mean faster times and better scores. Made from hard-wearing, injection-molded

polymer for reliable service. Access cover keeps out dirt, dust, and debris, yet can be removed for cleaning or maintenance. Due to varying tolerances on Saiga shotguns, minor fitting may be required; fitting instructions included. 20-Rd model features a thumb activat-ed slide assist to retain the spring to help you load rounds quickly. 12-Rd features a translucent cover to see how many rounds remain. abSPECS: Polymer, black/translucent. Fits Saiga 12 gauge shotguns only. Accepts 23/4" shells only. Instructions included. 20-Rd – 7" (17.8cm) dia., 3" (7.6cm) thick. 2 lbs., 4 oz. (1 kg) wt. 12-Rd – 5" (12.7cm) dia., 3" thick. 1 lb., 3 oz. (538 g) wt.

PRO MAG SAIGA 12

DRUM MAGAZINESuper-High-Capacity Mag For

Competition Or Recreation

#687-000-061AU Saiga 12 Drum Mag, 20-Rd, 7H82L99 � � $ 87.99#687-000-062AU Saiga 12 Drum Mag, 12-Rd, 7H62P99 � � 65.99

High-capacity magazine of tough, lightweight polymer composite lets you load up and fire 12 rounds before reloading your Saiga 12-gauge shotgun—ideal for home defense or three-gun competition. Rein-forced, injection molded Dupont™ polymer con-struction ensures durability and a slick, self-lubricat-ing interior for fast, reliable feeding. Raised horizontal ridges on the grasping areas ensure a secure grip when removing and inserting mag into the gun. Re-movable floorplate for easy cleaning; precision wound steel spring is treated with a corrosion-inhibiting coating for long-lasting protec-tion from rust. Counts as three parts for compliance with U.S. Code Title 18 Section 922(r) part-source requirements. abSPECS: Fiberglass-reinforced, injection-molded Dupont polymer, black. 12 round capacity. Fits Saiga 12 gauge shotguns only.

SGM TACTICAL SAIGA 12

12-ROUND MAGAZINERugged, Smooth-Feeding, All-Polymer

Construction

#100-005-783AU 12-Rd Saiga Shotgun Magazine, 4D49J99 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 53.99

Machined aluminum shotgun follower features Teflon coating for smooth feeding. Bright wine-red color makes it easy to tell when magazine is empty. Available in 12 and 20 gauge, follower fits most shotgun maga-zine tubes. Will not fit Mossberg shotguns. ab

SPECS: SPECS: Aluminum, Teflon coated, wine red. 12 Gauge 1.1 (2.7cm) long. .9 (2.2cm) O.D. 20 Gauge 1.1 (2.7cm) long. .7 (1.7cm) O.D.

NORDIC COMPONENTS

LOW DRAG SHOTGUN FOLLOWERS

Teflon-Coated Follower Helps Smooth Feeding

12 Ga.

#100-011-061AU Low Drag Follower, 12 Ga., 1B16A06 � �$ 18.00#100-011-062AU Low Drag Follower, 20 Ga.,

1B16Q06 � � � � � � � � � � � � � � � � � � � � � � � � � � � 18.00

20 Ga.

Ever spent the better part of an afternoon “manufacturing” a new magazine plug for a customer? It’s a trial-and-error process that keeps the customer happy but makes you poor. With our uni-versal “Fits-All” Plug, all that’s required is a simple “snap” at the cor-rect notch to fit all popular shotguns. For those oddball guns with non-standard length magazines, simply “notch” the “Fits-All” with a shop knife at the length required and “snap”! It’s that easy! Complete instructions and convenient “Snap-To- Fit Chart” included. Made of unbelievably tough polypropylene with an oversize head to position it correctly in all magazines - Won’t slide or rattle. Bright, safety-orange color is easy to see and find. Fast, economical way to help your customers comply with migratory game bird laws. abSPECS: 109/16" (26.8cm) long. 9/16" (14.3mm) diameter head. 3/8" (9.5mm) ribbed body.

“FITS-ALL”

SHOTGUN MAGAZINE PLUG

Universal - “Snaps” At Notches To Fit All Gauges & Lengths; Fits More Guns Than Other Plugs - Orange, Poly Plastic

#084-115-001AU 1 Shotgun Mag. Plug, 4H4M99 � � � � � � � $ 6.99#084-115-006AU 6 Shotgun Mag. Plugs, 4H29A99 � � � � � 41.99#084-115-012AU 12 Shotgun Mag. Plugs, 4H59P99 � � � � 83.99

Lightweight, aluminum clamp locks barrel and extended magazine tube togeth-er to form a rigid, rock-solid assembly. Can be used as a tactical light mount: install a 1" diameter light in one side of the clamp and

secure the other side to the barrel or magazine. Left- and right-side sling swivel sockets accept standard pushbutton swivels. Two steel Allen head screws pull the clamp halves together for a tight, non-slip hold. Also available with a 2" long, 4-slot, MIL-STD 1913 Picatinny rail that can be installed in the 3- or 9- o’clock position, for mounting additional accessories. Fits Remington 870, 1100, 11-87 and Benelli M1, M2, M4, M1014, 12 gauge shotguns. abSPECS: 6061 T6 aluminum, mil-spec Type 3 hardcoat anodized, matte black. Clamp - 11/2" (3.8cm) long, 17/16" (3.5cm) wide, 15/8" (4.1cm) high. Rail - 2" (5.1cm) long. Includes mounting hardware. Fits Remington 870/1100/11-87 and Benelli M1/M2/M4/M1014, 12 gauge only.

MESA TACTICAL REMINGTON/BENELLI

TACTICAL BARREL/MAGAZINE CLAMPSecures Extended Mag Tube & Mounts

Accessories Up Front

#100-004-032AU Barrel/Mag Clamp, w/Rail, 5A79P99 � �$ 83.99#100-005-447AU Barrel/Mag Clamp, Only, 5A59F99 � � � � 65.99

Replacement barrel assemblies let you change the barrel length of your SLP for different hunting or shooting situations. Replace-ment barrel assemblies let you change the barrel length of your SLP for different hunting or shooting situations. Vent rib with front bead makes these barrels ready to use out of the box. Barrels are back bored for Invector Plus chokes, and include one Invector Plus modified choke tube. Accepts 12 gauge shells up to 3" magnum. Includes two flexible magazine capacity reducers to fit standard and extended length magazines and choke wrench. SPECS: Steel, matte black finish. 12 ga.

FNH USA SLP

FACTORY BARREL ASSEMBLY

FNH Barrels For Factory Fit & Finish

#119-000-022AU FNH SLP 24" Barrel, 9A358D99 � � � � � $ 383.99#119-000-023AU FNH SLP 26" Barrel, 9A358C99 � � � � � 383.99#119-000-024AU FNH SLP 28" Barrel, 9A357G99 � � � � � 383.99#119-000-025AU FNH SLP 30" Barrel, 9A358H99 � � � � � 383.99

Mossberg is well-known in the industry as a manufacturer of high-quality barrels for other gun makers. These steel barrels for Remington 870 shotguns come in several different lengths and styles for multiple uses. 12 gauge only. Choose from short or long, smoothbore or fully-rifled, bead sight, rifle sights and even integral scope base.SPECS: SPECS: Steel. blue or matte blue finish. Cylinder bore unless rifled. 12 Ga. only.

MOSSBERG

BARRELS FOR REMINGTON 870

Lengths & Styles To Customize Your Remington 870

STOCK # BORE SIGHTS FINISH LGTH PRICE#631-000-344AU Rifled Integral

Scope BaseBlue 24" 1C220M99 $ 231.99

#631-000-347AU Cylinder Bead Blue 18½" 1C122L99 $ 128.99#631-000-348AU Cylinder Bead Matte

Blue18½" 1C125F99 $ 135.99

Complete, factory barrel assemblies ensure proper fit and pro-vide added versatility and maximum performance for your Reming-ton VERSA MAX 12-gauge shotgun. Each comes with green fiber optic front sight and silver middle bead. Also features attached gas cylinder plugs, gas pistons, vent rib, and ejector with spring and re-tainer. Threaded for Remington ProBore™ choke tubes only; barrels have one extended fit or flush fit tube installed. abSPECS: Steel. Fits Remington VERSA MAX and VERSA MAX Sportsman®. Available in matte black, Mossy Oak® Duck Blind™ Camo, Realtree® AP™ HD™ Camo, and Mossy Oak® Break-Up Infinity™ Camo.

Replacement Barrels For VERSA MAX Shotgun

STOCK # CHOKE FINISH LGTH PRICE#767-000-937AU Mod flush Matte black 28" 7F516I99 $ 551.99#767-000-938AU Flooded Timber

(Skeet) extendedMossy Oak Duck Blind

28" 7F468H99 $ 526.99

#767-000-940AU Mod flush Matte black 26" 7F506C99 $ 532.99#767-000-939AU Flooded Timber

(Skeet) extendedRealtree AP HD

26" 7F526H99 $ 650.99

#767-000-936AU Imp Cyl flush Matte black 22" 7F657N99 $ 691.99

REMINGTON® VERSA MAX®

FACTORY BARREL ASSEMBLIES

All-metal replacement for factory triggerguard and fire-control system substitutes metal parts for plastic for a

more solid feel and extra strength, durability, and reliability to stand up to hard field or tactical use. Self-contained module is precision manufactured to original factory dimensions for an exact fit and easy, drop-in installation. One-piece aluminum housing with in-tegral triggerguard provides exceptional strength, while hardened steel internal parts, including trigger and hammer, ensure years of reliable function. Adds only 1.7 oz. to help preserve your gun’s origi-nal balance.SPECS: Aluminum housing, steel trigger components, black matte finish. Fits Mossberg 500 and 590, 12 ga. only.

MOSSBERG 500/590

TRIGGER HOUSING ASSEMBLYAll-Metal Factory Replacement

Stands Up To Hard Use

#631-000-337AU Mossberg Trigger Assy, 1C181E99 � � $ 195.99

Remington factory slug barrels are fully-rifled for best accuracy with saboted slugs. Includes an integral cantilever scope base that ensures the scope will always be properly aligned with the bore, even if the barrel is removed for bird hunting and later reinstalled for deer season. Police Barrel is a 12 gauge, smooth, cylinder bore barrel with ramp-style front sight topped by a silver bead. abSPECS: Steel, black oxide finish. Fits Remington 870 only. Chambered for 2¾" and 3" shells. 12 Gauge – 20" long, gloss finish. 20 Gauge – 18½" length, matte finish. Police – Smooth bore 12 gauge (Cyl.). 18½" length. Bead-blasted, matte finish.

REMINGTON 870

RIFLED SLUG & POLICE BARRELS

Fully Rifled & Optics-Ready For Maximum Accuracy

#767-000-934AU 12 Ga. Rem 870 Slug Bbl, 7F356D99 � � $ 374.99#767-000-935AU 20 Ga. Rem 870 Slug Bbl, 6G201L99 � � 211.99#767-000-957AU 12 Ga. Rem 870 Police Bbl, 6G129K99 � � 141.99

MA

GA

ZIN

E T

UB

ES

& P

AR

TS

Looking for an easy, inexpensive way to en-hance the capacity and lower the recoil of your 12-gauge shotgun? It's possible with the addi-

tion of the OPSol Mini-Clip! This small aftermarket adapter fits easily into the opening located under the receiver of any Mossberg 500, 590 590A1, Shockwave, or Maverick 88 12-gauge shotgun. Once installed, the clip allows for reliable cycling of short, 1.75" personal-defense shotshells, such as those from Aguila, straight from the magazine. Want to shoot longer shells? The clip comes out just as easily as it went in, taking mere seconds. Another benefit of the Mini-Clip™ is that by enabling the reliable feeding of mini-shells, it allows smaller-statured and recoil sensitive shooters to shoot the tried-and-true Mossberg 12 gauge platform without the wrestling with full 12 gauge recoil. No need to hunt down a more expensive 20 or 28 gauge gun. The OPSol folks like to say this: with a Mini-Clip™ and 1.75" ammo, ANY shooter can stay "in the game" without all the pain.

OPSOL MOSSBERG 500/590/590A1/MAVERICK 88

MINI-CLIP™ SHELL ADAPTERLets You Shoot Short, Lighter-Recoiling Mini-Shells in Your Mossy AND Fit More

Round in the Tube

#100-026-444AU OPSol Mini-Clip Shell Adapter, 9Z12M79 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 14.99

PAGE 205Orders: 800-741-0015order on the web

brownells.com

SHO

TG

UN

MA

GA

ZIN

E T

UB

ES &

PA

RT

S

High-visibility stainless steel follower replaces the factory follower in Remington 870 and 11-87 shotguns. Won’t break un-der spring pressure, won’t rust and holds up to years of shooting. Bright stainless steel makes it easy to see how many rounds are left in the magazine tube. Ribbed side and drilled out center hole reduce weight without jeopardizing overall strength. abSPECS: Stainless steel. 5/8" (1.6cm) long.

VANG COMP SYSTEMS REM 870/11-87

STAINLESS STEEL FOLLOWERStrong, Dependable Replacement

For Factory Followers

#100-002-463AU 12 Ga. Stnls Steel Follower, 6K12B99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 18.99

Lightweight aluminum or stainless steel fol-lowers for Remington, Mossberg, and Benelli shotguns. Tough construction holds up to years of competitive and law enforcement shooting and won’t wear out after thousands of rounds, break under spring pressure, or degrade when cleaning solvents are used. Bright colors let you see immedi-ately if the magazine is empty. Vented design reduces weight to help promote smooth feeding. Stainless steel (SS) followers are natural finish. Aluminum followers are available in red, orange, green and black, depending on model and gauge. abSPECS: Aluminum or stainless steel. Benelli does not fit Nova or Super Nova, fits 12-gauge 3" Magnum guns. Remington fits 870, 1100 and 11-87.

STK# MOSS12 GA.

STK# BENELLI 12 GA.-3" MATERIAL COLOR

#080-000-233AU NA Alum Green#080-000-167AU #080-000-171AU SS Natural#080-000-232AU NA Alum Orange#080-000-168AU #080-000-172AU Alum Red

— Advise # — Shotgun Follower, 8K18K99 � � � � � � � � � � � �$ 21.99

SHOTGUN FOLLOWERSTough, Durable Replacement For Factory

Followers

STK# REM 12 GA. STK# REM 20 GA. MATERIAL COLOR#080-000-175AU NA Alum Green#080-000-226AU #080-000-229AU SS Natural#080-000-237AU #080-000-238AU Alum Orange#080-000-227AU #080-000-166AU Alum Red

— Advise # — TWS Ammunition, 8K18D99 � � � � � � � � � � � �$ 21.99

Fluorescent green,combat-style follower with projection on the head, instantly shows by sight, or by touch, if mag is empty. Molded from non-rusting, high-impact grade ABS with tapered tail

to help prevent magazine spring bind and improve reliability. abSPECS: 1.7" (4.5cm) long, .91" (23mm) diameter. 12 ga. only. Fits Rem-ington 870, 1100 and other miscellaneous shotguns with no detents in magazine tube.

SCATTERGUN TECHNOLOGIES

TACTICAL RESPONSE FOLLOWERSmooth-Feeding; Highly Visible

#800-100-004AU Magazine Follower, 8Z7L99 � � � � � � � � � � $ 8.99

Precision-machined alu-minum extension tubes in-crease the magazine capacity of your 12-gauge Benelli, Be-retta, or Winchester shotgun. Each tube has an extra-thick wall for added rigidity and strength. Ideal for shooting competitions, law en-forcement, and home defense. Screws onto the factory magazine threads for fast installation in minutes. Knurled grasping surfaces aid installation and removal for cleaning. abSPECS: 6061 T6 aluminum, black finish. Fits 12 gauge only. Includes tube extension, tube connector, spring, and fol