signal relays axicom - farnell
TRANSCRIPT
04-2011, Rev. 0411www.te.com© 2011 Tyco Electronics Corporation,a TE Connectivity Ltd. company
Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section.
Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-tion, application notes and all specifications are subject to change.
1
AXICOMSignal Relays
IM Relay
n Slim line 10x6mm, low profile 5.65mm and min. board-space 60mm2
n Switching current 2/5A, switching power 60W/62.5VA and switching voltage 220VDC/250VAC
n Low coil power consumption, 140mW standard, 100mW for high sensitive version, 50mW for ultra high sensitive version and 100mW for bistable version
n High dielectric and surge capability up to 2500Vrms between open contacts and 3000Vrms between coil and contacts
n High mechanical shock resistance up to 300g functional
Typical applications Telecommunication, access and transmission equipment, optical network terminals, modems, office and business equipment, consumer electronics, measurement and test equipment, industrial control, medical equipment, automotive applications
Approvals UL 508 File No. E 111441 Technical data of approved types on request
Contact Data standard, C D P standard and high high contact high dielectric current stability version version versionContact arrangement 2 form C, 2 CO Max. switching voltage 220VDC, 220VDC, 220VDC, 250VAC 250VAC 250VACRated current 2A 5A 2A Limiting continuous current 2A 5A 2ASwitching power 60W, 62.5VA
Contact material PdRu AgNi PdRu +Au +Au +Au covered covered covered Contact style twin contacts Minimum switching voltage 100µV Initial contact resistance <50mΩ at 10mA/20mV Thermoelectric potential <10µVOperate time typ. 1ms, max. 3ms Release time without diode in parallel typ. 1ms, max. 3ms with diode in parallel typ. 3ms, max. 5ms Bounce time max. typ. 1ms, max. 5ms
Contact Data (continued)Electrical endurance at contact application 0 (≤30mV/≤10mA) min. 2.5x106 operations cable load open end min. 2.0x106 operations resistive, 125VDC / 0.24A - 30W min. 5x105 operations resistive, 220 VDC / 0.27A - 60W min. 1x105 operations resistive, 250VAC / 0.25A - 62.5VA min. 1x105 operations resistive, 30VDC / 1A - 30W min. 5x105 operations resistive, 30VDC / 2A - 60W min. 1x105 operationsContact ratings, UL 220VDC, 0.24A, 60W 125VDC, 0.24A, 30W 250VAC, 0.25A, 62.5VA 125VAC, 0.5A, 62.5VA 30VDC, 2A, 60WMechanical endurance 108 operations
Coil Data Magnetic system monostable, bistable Coil voltage range 1.5 to 24VDC
Coil versions, standard version, monostable, 1 coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW 00 1.5 1.13 0.15 16 140 08 2.4 1.80 0.24 41 140 01 3 2.25 0.30 64 140 02 4.5 3.38 0.45 145 140 03 5 3.75 0.50 178 140 04 6 4.50 0.60 257 140 05 9 6.75 0.90 579 140 06 12 9.00 1.20 1029 140 07 24 18.00 2.40 2880 200All figures are given for coil without pre-energization, at ambient temperature +23°C
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 21 of 28
AXICOMÊSignalÊRelays
IM Relay
Contact Data
IM-A IM-B IM-C IM-D IM-ENumber of contacts and type 1ÊPoleÊbreak 1ÊPoleÊmake 1ÊPoleÊÊ
changeover2ÊPoleÊbreak 2ÊPoleÊmake
Contact assembly BifurcatedÊcontactsContact material Palladium-ruthenium,Êgold-coveredLimiting continuous current at max. ambient temperature
2ÊA 2ÊA 4ÊA 2ÊA 2ÊA
Maximum switching current 2ÊA 2ÊA 3ÊA 2ÊA 2ÊAMaximum swichting voltage 220ÊVdc
250ÊVacMaximum switching capacity 60ÊW,Ê62.5ÊVAThermoelectric potential <Ê10ʵVMinimum switching voltage 100ʵVInitial contact resistance / measuring condition: 10 mA / 20 mV
< 100 mΩ < 100 mΩ NO < 100 mΩ < 50 mΩ < 50 mΩ
Electrical CC0 Contact category 0 endurance (≤ 30 mV / ≥ 10 mA) cable load open end
Resistive load at 125 Vdc / 0.24 A - 30 W at 220 Vdc / 0.27 A - 60 W at 250 Vac / 0.25 A - 62.5 VA at 30 Vdc / 1 A - 30 W at 30 Vdc / 2 A - 60 W
min.Ê2.5ÊxÊ106Êoperationsmin.Ê2.0ÊxÊ106Êoperations
min.Ê5ÊxÊ105Êoperationsmin.Ê1ÊxÊ105Êoperationsmin.Ê1ÊxÊ105Êoperationsmin.Ê5ÊxÊ105Êoperationsmin.Ê1ÊxÊ105Êoperations
Mechanical endurance typ.Ê108ÊoperationsUL contact ratings 220 Vdc / 0.24 A - 60 W
125 Vdc / 0.24 A - 30 W250 Vac / 0.25 A - 62.5 VA125 Vac / 0.5 A - 62.5 VA
30 Vdc / 2 A - 60 W
Max. DC Load Breaking Capacity
DC
Volta
ge [V
dc]
DC current [A]
resistive load
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 24 of 28
AXICOMÊSignalÊRelays
IM Relay
Coil Operating Range
Unom = Nominal coil voltageUmax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energizedUop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays Uset min. resp. Ureset min.Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage)
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 10 0 1 10 12 0
Coi
l Vol
tage
[U/U
nom
]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
Unom. nominal coil voltage
Ambient Temperature [°C]
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
Ambient Temperature [°C]
Coi
l Vol
tage
[U/U
nom]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
Unom. nominal coil voltage
Urel. min.
00.20.40.60.81
1.21.41.61.82
2.22.42.62.83
3.23.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ambient Temperature [°C]
Coi
l Vol
tage
[U/U
nom]
Umax. - 5%coilduty at2x2A (100mW)
Umax.-5%coilduty at 0A(100mW)
Umax.-5%coilduty at 0A (200mW)
Umax. -5% coil duty at 2x1A (100mW)
Unom. nominal coil voltage
Umax. at 0A
140mW coil200mW coil
Urel. min.
50mW coil100mW coil
Uop min.
Umax. at 0A
Umax. - 100% coil duty at0A (100mW)
Umax. - 100% coil duty at0A (200mW)
Uset min.
100 mW Latching200 mW Latching
Coil operating range, standard version
Max. DC load breaking capacity
U
IM_
04-2011, Rev. 0411www.te.com© 2011 Tyco Electronics Corporation,a TE Connectivity Ltd. company
Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section.
Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-tion, application notes and all specifications are subject to change.
2
AXICOMSignal Relays
IM Relay (Continued)
Insulation Data standard C D,P standard, high high current, sensitive, dielectric high contact ultra high version stability sensitive version versionInitial dielectric strength between open contacts 1000Vrms 1500Vrms 750Vrms between contact and coil 1800Vrms 1800Vrms 1500Vrms between adjacent contacts 1000Vrms 1800Vrms 750VrmsInitial surge withstand voltage between open contacts 1500V 2500V 1000V between contact and coil 2500V 2500V 2000V between adjacent contacts 1500V 2500V 1000VInitial insulation resistance between insulated elements >109Ω >109Ω >109ΩCapacitance between open contacts max. 1pF between contact and coil max. 2pF between adjacent contacts max. 2pF
RF DataIsolation at 100MHz/900MHz -37.0dB/-18.8dB Insertion loss at 100MHz/900MHz -0.03dB/-0.33dB Voltage standing wave ratio (VSWR) at 100MHz/900MHz 1.06/1.49
Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenterAmbient temperature -40°C to +85°C Thermal resistance <150K/W Category of environmental protection IEC 61810 RT V - hermetically sealed Degree of protection, IEC 60529 IP 67, immersion cleanable Vibration resistance (functional) 20g, 10 to 500Hz Shock resistance (functional), half sinus 11ms 50g Shock resistance (destructive), half sinus 0.5ms 500gMounting position any Weight max. 0.75gResistance to soldering heat THT IEC 60068-2-20 265°C/10s Resistance to soldering heat SMT IEC 60068-2-58 265°C/10s Moisture sensitive level, JEDEC J-Std-020D MSL3 Ultrasonic cleaning not recommendedPackaging/unit THT version tube/50pcs., box/1000 pcs. SMT version reel/1000 pcs., box/1000 or 5000 pcs.
Coil Data (continued)Coil versions, sensitive version, monostable, 1 coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW 11 3 2.40 0.30 91 100 12 4.5 3.60 0.45 194 100 13 5 4.00 0.50 234 100 16 12 9.60 1.20 1315 110 17 24 19.20 2.40 4120 140Coil versions, ultra high sensitive version, monostable, 1 coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW 21 3 2.55 0.30 180 50 22 4.5 3.83 0.45 405 50 23 5 4.25 0.50 500 50 26 12 10.20 1.20 2880 50All figures are given for coil without pre-energization, at ambient temperature +23°C
Coil versions, standard, bistable 1 coil Coil Rated Set Reset Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW 40 1.5 1.13 -1.13 23 100 48 2.4 1.80 -1.80 58 100 41 3 2.25 -2.25 90 100 42 4.5 3.38 -3.38 203 100 43 5 3.75 -3.75 250 100 44 6 4.50 -4.50 360 100 45 9 6.75 -6.75 810 100 46 12 9.00 -9.00 1440 100 47 24 18.00 -18.00 2880 200All figures are given for coil without pre-energization, at ambient temperature +23°C
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 24 of 28
AXICOMÊSignalÊRelays
IM Relay
Coil Operating Range
Unom = Nominal coil voltageUmax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energizedUop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays Uset min. resp. Ureset min.Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage)
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 10 0 1 10 12 0
Coi
l Vol
tage
[U/U
nom
]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
Unom. nominal coil voltage
Ambient Temperature [°C]
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
Ambient Temperature [°C]
Coi
l Vol
tage
[U/U
nom]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
Unom. nominal coil voltage
Urel. min.
00.20.40.60.81
1.21.41.61.82
2.22.42.62.83
3.23.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ambient Temperature [°C]
Coi
l Vol
tage
[U/U
nom]
Umax. - 5%coilduty at2x2A (100mW)
Umax.-5%coilduty at 0A(100mW)
Umax.-5%coilduty at 0A (200mW)
Umax. -5% coil duty at 2x1A (100mW)
Unom. nominal coil voltage
Umax. at 0A
140mW coil200mW coil
Urel. min.
50mW coil100mW coil
Uop min.
Umax. at 0A
Umax. - 100% coil duty at0A (100mW)
Umax. - 100% coil duty at0A (200mW)
Uset min.
100 mW Latching200 mW Latching
Coil operating range, sensitive and ultra high sensitive coil
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 24 of 28
AXICOMÊSignalÊRelays
IM Relay
Coil Operating Range
Unom = Nominal coil voltageUmax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energizedUop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays Uset min. resp. Ureset min.Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage)
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 10 0 1 10 12 0
Coi
l Vol
tage
[U/U
nom
]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
Unom. nominal coil voltage
Ambient Temperature [°C]
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
Ambient Temperature [°C]
Coi
l Vol
tage
[U/U
nom]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
Unom. nominal coil voltage
Urel. min.
00.20.40.60.81
1.21.41.61.82
2.22.42.62.83
3.23.4
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ambient Temperature [°C]
Coi
l Vol
tage
[U/U
nom]
Umax. - 5%coilduty at2x2A (100mW)
Umax.-5%coilduty at 0A(100mW)
Umax.-5%coilduty at 0A (200mW)
Umax. -5% coil duty at 2x1A (100mW)
Unom. nominal coil voltage
Umax. at 0A
140mW coil200mW coil
Urel. min.
50mW coil100mW coil
Uop min.
Umax. at 0A
Umax. - 100% coil duty at0A (100mW)
Umax. - 100% coil duty at0A (200mW)
Uset min.
100 mW Latching200 mW Latching
Coil operating range, bistable 1 coil
Monostable versionrest condition
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHTStandard
IMÊTHTNarrow
IMÊSMTGullÊWings
IMÊSMTJ-Legs
mm inch mm inch mm inch mm inchLWH
10.00ʱÊ0.086.00ʱÊ0.085.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.085.70ʱÊ0.305.80ʱÊ0.08
0.393ʱÊ0.0030.224ʱÊ0.0120.230ʱÊ0.003
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
SMT VersionStandard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊpositionÊ mightÊ changeÊ duringÊ trans-portationÊ andÊ mustÊ beÊ resetÊ beforeÊuse.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
TT1T2D1D2TwS
3.2N/A
5.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.400.75
0.125N/A
0.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.029
3.2N/A
3.20ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.40.30ʱÊ0.05
0.125N/A
0.126ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.011ʱÊ0.002
N/A7.50ʱÊ0.305.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.295ʱÊ0.0110.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
N/A2.80ʱÊ0.205.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.110ʱÊ0.0070.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.65
-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.8±
0.08
0.3±
0.05
10.0±0.08 6.0±0.08
5.08±0.10.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
Terminal assignmentTOP view on relay
Bistable version, 1 coilreset condition
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHTStandard
IMÊTHTNarrow
IMÊSMTGullÊWings
IMÊSMTJ-Legs
mm inch mm inch mm inch mm inchLWH
10.00ʱÊ0.086.00ʱÊ0.085.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.085.70ʱÊ0.305.80ʱÊ0.08
0.393ʱÊ0.0030.224ʱÊ0.0120.230ʱÊ0.003
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
SMT VersionStandard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊpositionÊ mightÊ changeÊ duringÊ trans-portationÊ andÊ mustÊ beÊ resetÊ beforeÊuse.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
TT1T2D1D2TwS
3.2N/A
5.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.400.75
0.125N/A
0.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.029
3.2N/A
3.20ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.40.30ʱÊ0.05
0.125N/A
0.126ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.011ʱÊ0.002
N/A7.50ʱÊ0.305.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.295ʱÊ0.0110.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
N/A2.80ʱÊ0.205.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.110ʱÊ0.0070.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.65
-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.8±
0.08
0.3±
0.05
10.0±0.08 6.0±0.08
5.08±0.10.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
Contacts are shown in reset condition. Contact position might change during transportation and must be reset before use.
04-2011, Rev. 0411www.te.com© 2011 Tyco Electronics Corporation,a TE Connectivity Ltd. company
Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section.
Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-tion, application notes and all specifications are subject to change.
3
AXICOMSignal Relays
IM Relay (Continued)
THT version
Dimensions
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHTStandard
IMÊTHTNarrow
IMÊSMTGullÊWings
IMÊSMTJ-Legs
mm inch mm inch mm inch mm inchLWH
10.00ʱÊ0.086.00ʱÊ0.085.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.085.70ʱÊ0.305.80ʱÊ0.08
0.393ʱÊ0.0030.224ʱÊ0.0120.230ʱÊ0.003
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
SMT VersionStandard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊpositionÊ mightÊ changeÊ duringÊ trans-portationÊ andÊ mustÊ beÊ resetÊ beforeÊuse.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
TT1T2D1D2TwS
3.2N/A
5.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.400.75
0.125N/A
0.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.029
3.2N/A
3.20ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.40.30ʱÊ0.05
0.125N/A
0.126ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.011ʱÊ0.002
N/A7.50ʱÊ0.305.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.295ʱÊ0.0110.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
N/A2.80ʱÊ0.205.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.110ʱÊ0.0070.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.65
-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.8±
0.08
0.3±
0.05
10.0±0.08 6.0±0.08
5.08±0.10.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
SMT version
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHTStandard
IMÊTHTNarrow
IMÊSMTGullÊWings
IMÊSMTJ-Legs
mm inch mm inch mm inch mm inchLWH
10.00ʱÊ0.086.00ʱÊ0.085.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.085.70ʱÊ0.305.80ʱÊ0.08
0.393ʱÊ0.0030.224ʱÊ0.0120.230ʱÊ0.003
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
SMT VersionStandard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊpositionÊ mightÊ changeÊ duringÊ trans-portationÊ andÊ mustÊ beÊ resetÊ beforeÊuse.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
TT1T2D1D2TwS
3.2N/A
5.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.400.75
0.125N/A
0.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.029
3.2N/A
3.20ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.40.30ʱÊ0.05
0.125N/A
0.126ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.011ʱÊ0.002
N/A7.50ʱÊ0.305.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.295ʱÊ0.0110.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
N/A2.80ʱÊ0.205.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.110ʱÊ0.0070.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.65
-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.8±
0.08
0.3±
0.05
10.0±0.08 6.0±0.08
5.08±0.10.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHTStandard
IMÊTHTNarrow
IMÊSMTGullÊWings
IMÊSMTJ-Legs
mm inch mm inch mm inch mm inchLWH
10.00ʱÊ0.086.00ʱÊ0.085.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.085.70ʱÊ0.305.80ʱÊ0.08
0.393ʱÊ0.0030.224ʱÊ0.0120.230ʱÊ0.003
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
SMT VersionStandard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊpositionÊ mightÊ changeÊ duringÊ trans-portationÊ andÊ mustÊ beÊ resetÊ beforeÊuse.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
TT1T2D1D2TwS
3.2N/A
5.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.400.75
0.125N/A
0.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.029
3.2N/A
3.20ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.40.30ʱÊ0.05
0.125N/A
0.126ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.011ʱÊ0.002
N/A7.50ʱÊ0.305.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.295ʱÊ0.0110.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
N/A2.80ʱÊ0.205.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.110ʱÊ0.0070.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.65
-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.8±
0.08
0.3±
0.05
10.0±0.08 6.0±0.08
5.08±0.10.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHTStandard
IMÊTHTNarrow
IMÊSMTGullÊWings
IMÊSMTJ-Legs
mm inch mm inch mm inch mm inchLWH
10.00ʱÊ0.086.00ʱÊ0.085.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.085.70ʱÊ0.305.80ʱÊ0.08
0.393ʱÊ0.0030.224ʱÊ0.0120.230ʱÊ0.003
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
SMT VersionStandard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊpositionÊ mightÊ changeÊ duringÊ trans-portationÊ andÊ mustÊ beÊ resetÊ beforeÊuse.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
TT1T2D1D2TwS
3.2N/A
5.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.400.75
0.125N/A
0.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.029
3.2N/A
3.20ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.40.30ʱÊ0.05
0.125N/A
0.126ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.011ʱÊ0.002
N/A7.50ʱÊ0.305.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.295ʱÊ0.0110.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
N/A2.80ʱÊ0.205.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.110ʱÊ0.0070.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.65
-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.8±
0.08
0.3±
0.05
10.0±0.08 6.0±0.08
5.08±0.10.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
Standard version Narrow version Gull wings J-legs
PCB layout TOP view on component side of PCB
Standard version Narrow version Gull wings J-legs
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHTStandard
IMÊTHTNarrow
IMÊSMTGullÊWings
IMÊSMTJ-Legs
mm inch mm inch mm inch mm inchLWH
10.00ʱÊ0.086.00ʱÊ0.085.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.085.70ʱÊ0.305.80ʱÊ0.08
0.393ʱÊ0.0030.224ʱÊ0.0120.230ʱÊ0.003
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
SMT VersionStandard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊpositionÊ mightÊ changeÊ duringÊ trans-portationÊ andÊ mustÊ beÊ resetÊ beforeÊuse.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
TT1T2D1D2TwS
3.2N/A
5.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.400.75
0.125N/A
0.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.029
3.2N/A
3.20ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.40.30ʱÊ0.05
0.125N/A
0.126ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.011ʱÊ0.002
N/A7.50ʱÊ0.305.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.295ʱÊ0.0110.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
N/A2.80ʱÊ0.205.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.110ʱÊ0.0070.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.65
-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.8±
0.08
0.3±
0.05
10.0±0.08 6.0±0.08
5.08±0.10.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHTStandard
IMÊTHTNarrow
IMÊSMTGullÊWings
IMÊSMTJ-Legs
mm inch mm inch mm inch mm inchLWH
10.00ʱÊ0.086.00ʱÊ0.085.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.085.70ʱÊ0.305.80ʱÊ0.08
0.393ʱÊ0.0030.224ʱÊ0.0120.230ʱÊ0.003
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
SMT VersionStandard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊpositionÊ mightÊ changeÊ duringÊ trans-portationÊ andÊ mustÊ beÊ resetÊ beforeÊuse.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
TT1T2D1D2TwS
3.2N/A
5.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.400.75
0.125N/A
0.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.029
3.2N/A
3.20ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.40.30ʱÊ0.05
0.125N/A
0.126ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.011ʱÊ0.002
N/A7.50ʱÊ0.305.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.295ʱÊ0.0110.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
N/A2.80ʱÊ0.205.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.110ʱÊ0.0070.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.65
-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.43.
2±0.
15
2.2±
0.15
2.2±
0.15
3.2
5.8±
0.08
0.3±
0.05
10.0±0.08 6.0±0.08
5.08±0.10.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHTStandard
IMÊTHTNarrow
IMÊSMTGullÊWings
IMÊSMTJ-Legs
mm inch mm inch mm inch mm inchLWH
10.00ʱÊ0.086.00ʱÊ0.085.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.085.70ʱÊ0.305.80ʱÊ0.08
0.393ʱÊ0.0030.224ʱÊ0.0120.230ʱÊ0.003
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
SMT VersionStandard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊpositionÊ mightÊ changeÊ duringÊ trans-portationÊ andÊ mustÊ beÊ resetÊ beforeÊuse.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
TT1T2D1D2TwS
3.2N/A
5.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.400.75
0.125N/A
0.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.029
3.2N/A
3.20ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.40.30ʱÊ0.05
0.125N/A
0.126ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.011ʱÊ0.002
N/A7.50ʱÊ0.305.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.295ʱÊ0.0110.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
N/A2.80ʱÊ0.205.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.110ʱÊ0.0070.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.65
-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.43.
2±0.
15
2.2±
0.15
2.2±
0.15
3.2
5.8±
0.08
0.3±
0.05
10.0±0.08 6.0±0.08
5.08±0.10.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28
AXICOMÊSignalÊRelays
IM Relay 2 Pole Changeover / 2 Form C / DPDT
Dimensions Dimensions in mm
THT Version
Mounting Hole Layout
View onto the component side of the PCB (top view)
Non-Latching Type
not energized condition
Latching Type, 1 Coil
reset condition
IMÊTHTStandard
IMÊTHTNarrow
IMÊSMTGullÊWings
IMÊSMTJ-Legs
mm inch mm inch mm inch mm inchLWH
10.00ʱÊ0.086.00ʱÊ0.085.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.085.70ʱÊ0.305.80ʱÊ0.08
0.393ʱÊ0.0030.224ʱÊ0.0120.230ʱÊ0.003
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.20
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
10.00ʱÊ0.08ÊÊ6.00ʱÊ0.08ÊÊ5.65ÊÐÊ0.02
0.393ʱÊ0.0030.236ʱÊ0.0030.222ÊÐÊ0.008
SMT VersionStandard Version Narrow Version
Solder Pad Layout
View onto the component side of the PCB (top view)
Gull Wings J-Legs
Standard Version Narrow Version Gull Wings
¯Êmin.Ê0.75 ¯Êmin.Ê0.75
Terminal Assignment
Relay – top view
ContactsÊ inÊ resetÊ position.Ê ContactÊpositionÊ mightÊ changeÊ duringÊ trans-portationÊ andÊ mustÊ beÊ resetÊ beforeÊuse.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
TT1T2D1D2TwS
3.2N/A
5.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.400.75
0.125N/A
0.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.029
3.2N/A
3.20ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.40.30ʱÊ0.05
0.125N/A
0.126ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.0150.011ʱÊ0.002
N/A7.50ʱÊ0.305.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.295ʱÊ0.0110.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
N/A2.80ʱÊ0.205.08ʱÊ0.103.20ʱÊ0.152.20ʱÊ0.15
0.4N/A
N/A0.110ʱÊ0.0070.200ʱÊ0.0040.126ʱÊ0.0060.087ʱÊ0.006
0.015N/A
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.65
-0.2
0.75
10.0±0.08 5.7±0.3
3.2±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
3.2
5.8±
0.08
0.3±
0.05
10.0±0.08 6.0±0.08
5.08±0.10.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
10.0±0.08 6.0±0.08
5.08±0.1
0.4
3.2±
0.15
2.2±
0.15
2.2±
0.15
5.65
-0.2
7.5±0.3
Coplanarity ≤0.1mm
2.8±0.2
Coplanarity ≤0.1mm
Recommended soldering conditionsProcessing
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25 of 28
AXICOMÊSignalÊRelays
IM Relay
Soldering conditions according IEC 60058-2-58 and IPC/JEDEC J-STD-020B
Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature)
240°C
180°C
130°C
100°C
20-40sec Full line: typicalDottedline: processlimits
forcedcooling
Time (s)
Tem
pera
ture
°C
Time (s)
Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature)
Tem
pera
ture
°C
Time (s)
Recommended Soldering Conditions
Recommended Reflow Soldering Profile
Resistance to Soldering Heat - Reflow Profile
Tem
pera
ture
°C
Vapor Phase Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature)
Soldering conditions according IEC 60058-2-58 andIPC/JEDEC J-STD-020B
Vapor Phase Soldering: temperature/time profile (lead and housing peak temperature)
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25 of 28
AXICOMÊSignalÊRelays
IM Relay
Soldering conditions according IEC 60058-2-58 and IPC/JEDEC J-STD-020B
Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature)
240°C
180°C
130°C
100°C
20-40sec Full line: typicalDottedline: processlimits
forcedcooling
Time (s)
Tem
pera
ture
°C
Time (s)
Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature)
Tem
pera
ture
°C
Time (s)
Recommended Soldering Conditions
Recommended Reflow Soldering Profile
Resistance to Soldering Heat - Reflow Profile
Tem
pera
ture
°C
Vapor Phase Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature)
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25 of 28
AXICOMÊSignalÊRelays
IM Relay
Soldering conditions according IEC 60058-2-58 and IPC/JEDEC J-STD-020B
Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature)
240°C
180°C
130°C
100°C
20-40sec Full line: typicalDottedline: processlimits
forcedcooling
Time (s)
Tem
pera
ture
°C
Time (s)
Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature)
Tem
pera
ture
°C
Time (s)
Recommended Soldering Conditions
Recommended Reflow Soldering Profile
Resistance to Soldering Heat - Reflow Profile
Tem
pera
ture
°C
Vapor Phase Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature)
Recommended reflow soldering profile
Resistance to soldering heat - Reflow profile
Infrared Soldering: temperature/time profile (lead and housing peak temperature)
04-2011, Rev. 0411www.te.com© 2011 Tyco Electronics Corporation,a TE Connectivity Ltd. company
Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section.
Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-tion, application notes and all specifications are subject to change.
4
AXICOMSignal Relays
IM Relay (Continued)
Packing
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 26 of 28
AXICOMÊSignalÊRelays
IM Relay
Packing Dimensions in mm
Reel Dimension
Tube for THT version 50 relays per tube 1,000 relays per box
Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box
Tube for THT version50 relays per tube, 1000 relays per box
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 26 of 28
AXICOMÊSignalÊRelays
IM Relay
Packing Dimensions in mm
Reel Dimension
Tube for THT version 50 relays per tube 1,000 relays per box
Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box
Tape and reel for SMT version1000 relays per reel, 1000 or 5000 relays per box
Reel dimensions
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 26 of 28
AXICOMÊSignalÊRelays
IM Relay
Packing Dimensions in mm
Reel Dimension
Tube for THT version 50 relays per tube 1,000 relays per box
Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 26 of 28
AXICOMÊSignalÊRelays
IM Relay
Packing Dimensions in mm
Reel Dimension
Tube for THT version 50 relays per tube 1,000 relays per box
Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box
Product code structure Typical product code IM 03 G R
Type IM Signal Relays IM SeriesContact arrangement Blank 2 form C, 2 COCoil Coil code: please refer to coil versions tablePerformance type Blank Standard version C High dielectric version D High current version P High contact stability versionTerminals T THT - standard J SMT - J-leg N THT - narrow version G SMT - gull wingPacking S Tube R Reel
04-2011, Rev. 0411www.te.com© 2011 Tyco Electronics Corporation,a TE Connectivity Ltd. company
Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section.
Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-tion, application notes and all specifications are subject to change.
5
AXICOMSignal Relays
IM Relay (Continued)
Product code Arrangement Perf. type Coil Coil type Coil Terminals Part number IM00GR 2 form C, Standard 1.5VDC Monostable Standard SMT gull wing 3-1462037-7 IM00JR 2 CO SMT J-leg 3-1462037-9 IM00NS contacts THT narrow 1-1462038-0 IM01GR 3VDC SMT gull wing 1462037-1 IM01JR SMT J-leg 4-1462037-0 IM01NS THT narrow 1-1462038-1 IM01TS THT standard 1462037-4 IM02GR 4.5VDC SMT gull wing 1462037-9 IM02JR SMT J-leg 1-1462037-1 IM02NS THT narrow 1-1462038-2 IM03GR 5VDC SMT gull wing 1-1462037-4 IM03JR SMT J-leg 1-1462037-6 IM03NS THT narrow 1-1462038-3 IM03TS THT standard 1-1462037-8 IM04GR 6VDC SMT gull wing 4-1462037-2 IM04JR SMT J-leg 4-1462037-4 IM04NS THT narrow 1-1462038-4 IM05GR 9VDC SMT gull wing 3-1462037-4 IM05JR SMT J-leg 4-1462037-5 IM05NS THT narrow 1-1462038-5 IM05TS THT standard 2-1462037-2 IM06GR 12VDC SMT gull wing 2-1462037-3 IM06JR SMT J-leg 4-1462037-6 IM06NS THT narrow 1-1462038-6 IM07GR 24VDC SMT gull wing 4-1462037-7 IM07JR SMT J-leg 4-1462037-8 IM07NS THT narrow 1-1462038-7 IM08GR 2.4VDC SMT gull wing 6-1462039-3 IM11GR 3VDC High sens. 9-1462038-5 IM12GR 4.5VDC 1462039-3 IM13GR 5VDC 1462039-4 IM16GR 12VDC 1462039-5 IM17GR 24VDC 1462039-6 IM17TS THT standard 4-1462039-6 IM21GR 3VDC Ultra SMT gull wing 2-1462039-6 IM21TS high THT standard 1-1462039-5 IM22GR 4.5VDC sensitive SMT gull wing 2-1462039-7 IM22TS THT standard 2-1462039-8 IM23GR 5VDC SMT gull wing 2-1462039-9 IM23TS THT standard 3-1462039-0 IM25GR 9VDC SMT gull wing 3-1462039-5 IM25TS THT standard 3-1462039-6 IM26GR 12VDC SMT gull wing 3-1462039-1 IM26TS THT standard 3-1462039-2 IM40GR 1.5VDC Bistable Standard SMT gull wing 5-1462037-1 IM40JR SMT J-leg 5-1462037-2 IM40NS THT narrow 1-1462038-8 IM40TS THT standard 5-1462037-0 IM41GR 3VDC SMT gull wing 5-1462037-4 IM41JR SMT J-leg 5-1462037-5 IM41NS THT narrow 1-1462038-9 IM41TS THT standard 5-1462037-3 IM42GR 4.5VDC SMT gull wing 3-1462037-1 IM42JR SMT J-leg 5-1462037-7 IM42NS THT narrow 2-1462038-0 IM42TS THT standard 5-1462037-6 IM43GR 5VDC SMT gull wing 5-1462037-9 IM43JR SMT J-leg 6-1462037-0 IM43NS THT narrow 2-1462038-1 IM43TS THT standard 5-1462037-8 IM44GR 6VDC SMT gull wing 6-1462037-2 IM44JR SMT J-leg 6-1462037-3 IM44NS THT narrow 2-1462038-2 IM44TS THT standard 6-1462037-1 IM45GR 9VDC SMT gull wing 6-1462037-4 IM45JR SMT J-leg 6-1462037-5 IM45NS THT narrow 2-1462038-3 IM46GR 12VDC SMT gull wing 6-1462037-7 IM46JR SMT J-leg 6-1462037-8 IM46NS THT narrow 2-1462038-4 IM46TS THT standard 6-1462037-6 IM47GR 24VDC SMT gull wing 7-1462037-0 IM47JR SMT J-leg 7-1462037-1 IM47NS THT narrow 2-1462038-5 IM47TS THT standard 6-1462037-9 IM48GR 2.4VDC SMT gull wing 1462039-8
04-2011, Rev. 0411www.te.com© 2011 Tyco Electronics Corporation,a TE Connectivity Ltd. company
Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section.
Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-tion, application notes and all specifications are subject to change.
6
AXICOMSignal Relays
IM Relay (Continued)
Product code Arrangement Perf. type Coil Coil type Coil Terminals Part number IM01CGR 2 form C High 3VDC Monostable Standard SMT gull wing 1462038-4 IM01CTS 2 CO dielectric THT standard 9-1462038-6 IM02CGR contacts 4.5VDC SMT gull wing 1462038-1 IM03CGR 5VDC SMT gull wing 1462038-2 IM03CJR SMT J-leg 4-1462039-8 IM03CTS THT standard 4-1462039-7 IM05CGR 9VDC SMT gull wing 1462038-3 IM06CGR 12VDC SMT gull wing 9-1462037-9 IM06CJR SMT J-leg 3-1462039-4 IM06CTS THT standard 4-1462037-9 IM07CGR 24VDC SMT gull wing 1462039-2 IM07CTS THT standard 1462039-1 IM17CGR High sens. SMT gull wing 1462039-7 IM41CGR 3VDC Bistable Standard 4-1462039-2 IM42CGR 4.5VDC 4-1462039-1 IM43CGR 5VDC 9-1462038-7 IM02DGR High 4.5VDC Monostable Standard 9-1462038-8 IM03DGR current 5VDC 9-1462038-9 IM03DJR SMT J-leg 3-1462039-3 IM05DGR 9VDC SMT gull wing 1-1462039-7 IM06DGR 12VDC 1-1462039-8 IM06DJR SMT J-leg 7-1462039-0 IM06DTS THT standard 3-1462039-8 IM07DGR 24VDC SMT gull wing 3-1462039-7 IM07DJR SMT J-leg 7-1462039-4 IM07DTS THT standard 7-1462039-2 IM22DTS 4.5VDC U.h.sens. 7-1462039-6 IM41DGR 3VDC Bistable Standard SMT gull wing 6-1462039-8 IM42DGR 4.5VDC 1-1462039-9 IM42DNS THT narrow 1-1462039-6 IM46DNS 12VDC 1-1462039-2 IM47DJR 24VDC SMT J-leg 7-1462039-5 IM48DGR 2.4VDC SMT gull wing 1462039-9 IM49DGR 2VDC 2-1462039-2 IM02PGR High 4.5VDC Monostable Standard 5-1462039-4 IM02PNS contact THT narrow 5-1462039-8 IM03PGR stability 5VDC SMT gull wing 5-1462039-5 IM03PJR SMT J-leg 6-1462039-6 IM03PNS THT narrow 5-1462039-9 IM06PGR 12VDC SMT gull wing 5-1462039-6 IM06PNS THT narrow 6-1462039-0 IM42PGR 4.5VDC Bistable Standard SMT gull wing 5-1462039-7 IM42PNS THT narrow 7-1462039-8 IM43PGR SMT gull wing 7-1462039-3 IM46PNS 12VDC THT narrow 6-1462039-1