SketchUp Installation Guide

JANUARY 2008

Page 2

Google SketchUp Pro w/ Podium Installation

Insert the Installation CD into the CD/DVD drive.

The installation wizard should start automatically.

If the wizard does not start automatically then open “My Computer”and Explore/Open the CD/DVD drive. Then double-click on the“setup.exe”

Click NEXT to continue.

Select Google SketchUp Pro and Podium for SketchUp, Componenet &Material Libraries to install and click NEXT to continue.

Page 3

Click INSTALL to start the installation.

Page 4

Google SketchUp Pro installation

Click NEXT to continue with the installation.

Read and accept the license agreement. Click NEXT tocontinue.

Page 5

Choose Destination Location. Changing the default location is notrecommended. Click NEXT to continue.

Click INSTALL to start the Google SketchUp Pro installation.

Page 6

Click FINISH to complete the Google SketchUp Pro portion of the installation.

Page 7

Browse to the folder where your Google SketchUp Pro was installed. Note: Ifyou did not change the default location when installing the Google SketchUpPro then you do not have to change this default location. Click NEXT tocontinue.

Podium Intallation

The installation wizard for Podium should automatically start after the GoogleSketchUp Pro installation has finished. Click NEXT to continue.

Page 8

Click INSTALL to continue.

Select the components to install and click NEXT to continue.

Page 9

Click FINISH to complete the Podium installation.

Page 10

Click FINISH to complete this library installation.

The following steps to configure and share files should be completed by anetwork administrator. These steps should be used as a basic guideline only.

Create a shared folder on a server or a computer that will be available whenusers use SketchUp.

Note: A share on the local computer is required for single computerinstallation.

Create a folder.

Right Click on the new folder and choose “Sharing and Security”.

Page 11

Click on the link “If you understand the security risks but want to share files withoutrunning the wizard, click here”.

Choose “Just enable file sharing” and click OK to continue.

Page 12

If your computer is not configured for file sharing then you will see dialogs shown on page12 and 13.

Enable the options as shown and click OK to continue.

Skip to page 14 if your computer is configured for Advanced File Sharing.

Page 13

This page illustrates typical dialogs for file sharing when Advanced File Sharing is enabled.

Page 14

License Google SketchUp Pro

Start Google SketchUp Pro from one of the shortcuts created during the installation.Choose “Enter License” from the SketchUp Pro Evaluation Dialog.

Page 15

Click SKIP from the first SketchUp Authorization dialog.

Complete the next SketchUp Authorization dialog.

1. Enter your Registered User Name2. Enter the Company / Organization3. Enter the Serial number that was emailed to you.4. Enter the Authorization number that was emailed to you.

See Fig. 32

You will need to copy the server.dat file and insert it onto all other computers thathave SketchUp 6 installed. Paste to C:/Program Files/Google/Google SketchUp 6

Page 16

Click OK to Finish the installation.

Authorize all other installations of Google SketchUp Pro.To authorize the other installations follow the steps above (Fig. 44) or copythe SERVER.DAT file from the first installation to the other installations.The SERVER.DAT is located in the Google SketchUp Pro installationfolder. ie. C:\Program Files\Google\Google SketchUp 6\support. Place acopy of the SERVER.DAT file into the same folder on the destinationcomputers as it was located on the source computer.