source pack installaon of openfoam. 4.0 into rhl · source pack installaon of openfoam. 4.0 into...
TRANSCRIPT
Sourcepackinstalla0onofOpenFOAM.4.0intoRHL
OpenCAELocalStudyMee0ngY.Takagi
July2,2016
Downloadthepackagesfromtheofficialwebsite
Whereshouldweinstall?
• IfyouhaveamachineonlyforOpenFOAM,youcanupgradethelibrariesofthesystem.“DependentpackagesrequiredforRHEL6.5needupda:ngtonewerversions,e.g.Gccneedsupgradingfromv4.4tov4.5+.TheseupgradesmaybeavailableunderaRHELsupportsubscrip:on.Ifnot,thenupgradescanbeobtainedfromunofficialrepositoriesusingthefollowinginstruc:ons:”
• Ifyoudonotwanttoupgradethesystemcasually,thecompa0blesoSwares/librariessuchasGCCandMPIarebuiltinthelocalThirdPartydirectory.
Ourmachineenvironment
• OS:CentOS6.5(64bit)• Systemlibraries:
– GCC4.4.7– cmake2.6-patch4– Qt4.6.2
• Targetconfigura0onofOpenFOAM– Version4.0– Mainsolvers,parallelprocessing,paraFoam(ParaViewreader)– Requiredlaterversionlibrariesarebuiltintheprojectdirectory
(ThirdPartydirectory).
Procedureofinstalla0on
1. Installthenecessaryrpmpackages.2. Downloadthesourcepackagesandextractthem.3. Edittheconfigura0on/sedngfiles.4. Compilethetools/libraries.5. Allwmake6. Test(foamInstallationTest)7. CompileParaViewanditsreader.
Installtherpmpackageswithyum
• Necessarypackages:– git,gcc-c++,bison,flex,m4,glibc-devel,glibc-devel.i686,zlib-devel
• Asaroot,typetheyumcommand:$ yuminstallgccgcc-c++bisonflexm4glibc-devel\glibc-devel.i686zlib-devel
Directoryconfigura0on
• UnderOpenFOAM-4.0
• UnderThirdParty-4.0
Allwmakeapplica0ons/doc/plalorms/tutorials/COPYINGREADME.orgbin/etc/src/wmake/
Allclean cmake-3.2.1/ makeParaView3Allwmake etc/ makeQtAllwmakeLibccmio gcc-4.8.5/ mpc-1.0.1/CGAL-4.8/ gmp-5.1.2/ mpfr-3.1.2/COPYING makeCGAL openmpi-1.10.2/ParaView-5.0.1/ makeCmake plalorms/README.html makeGcc qt-everywhere-opensource-src-4.8.6/README.org makeGperSools scotch_6.0.3/boost_1_58_0/ makeLLVM build/ makeParaView
Red: make by yourself Blue: generated later
Downloadthesourcepackagesandextractthem
• OpenFOAMmainsourcecode:
• OpenFOAMThirdParty:
• Compiler(GCC):
$ gitclonegit://github.com/OpenFOAM/OpenFOAM-4.x.git$ mvOpenFOAM-4.xOpenFOAM-4.0
$ gitclonegit://github.com/OpenFOAM/ThirdParty-4.x.git$ mvThirdParty-4.xThirdParty-4.0
$ cdThirdParty-4.0.x$ wgethttps://ftp.gnu.org/gnu/gcc/gcc-4.8.5/\gcc-4.8.5.tar.gz$ tarzxvfgcc-4.8.5.tar.gz
Downloadthesourcepackagesandextractthem
• Libraries(gmp,mpfr,mpc)$ wgethttp://ftp.gnu.org/gnu/gmp/gmp-5.1.2.tar.bz2$ tarjxvfgmp-5.1.2.tar.bz2$ wgethttp://ftp.gnu.org/gnu/mpfr/mpfr-3.1.2.tar.gz$ tarzxvfmpfr-3.1.2.tar.gz$ wgethttp://ftp.gnu.org/gnu/mpc/mpc-1.0.1.tar.gz$ tarzxvfmpc-1.0.1.tar.gz
Downloadthesourcepackagesandextractthem
• OpenMPI:
• Scotch:• Boost:
• CGAL:
$ wget--no-check-certificatehttps://www.open-mpi.org/\software/ompi/v1.10/downloads/openmpi-1.10.2.tar.gz$ tarzxvfopenmpi-1.10.2.tar.gz
$ wgethttps://gforge.inria.fr/frs/download.php/\file/34099/scotch_6.0.3.tar.gz$ tarzxvfscotch_6.0.3.tar.gz
$ wgethttp://sourceforge.net/projects/boost/files/\boost/1.58.0/boost_1_58_0.tar.gz$ tarzxvfboost_1_58_0.tar.gz
$ wgethttps://github.com/CGAL/cgal/releases/download/\releases/CGAL-4.8/CGAL-4.8.tar.xz$ tarJxvfCGAL-4.8.tar.xz
Downloadthesourcepackagesandextractthem
• Cmake:
• Qt(qmake)
IfyoudonotneedParaView,thispackageisunnecessary.
$ wget--no-check-certificatehttps://download.qt.io/\archive/qt/4.8/4.8.6/qt-everywhere-opensource-src-4.8.6.tar.gz$ tarzxvfqt-everywhere-opensource-src-4.8.6.tar.gz
$ wget--no-check-certificatehttps://cmake.org/files/\v3.2/cmake-3.2.1.tar.gz$ tarzxvfcmake-3.2.1.tar.gz
Edittheconfigura0on/sedngfiles
• EditOpenFOAM-4.0environmentfile
$ vi../OpenFOAM-4.0/etc/bashrc
exportWM_PROJECT=OpenFOAMexportWM_PROJECT_VERSION=4.0#Pleasesettotheappropriatepathifthedefaultisnotcorrect.#[$BASH_SOURCE]&&\exportFOAM_INST_DIR=${BASH_SOURCE%/*/*/*}||\#exportFOAM_INST_DIR=$HOME/$WM_PROJECT#exportFOAM_INST_DIR=~$WM_PROJECTexportFOAM_INST_DIR=/opt/$WM_PROJECT#exportFOAM_INST_DIR=/usr/local/$WM_PROJECT
Edittheconfigura0on/sedngfiles
$ vi../OpenFOAM-4.0/etc/bashrc
#-Compilerlocation:#WM_COMPILER_TYPE=system|ThirdParty(OpenFOAM)exportWM_COMPILER_TYPE=ThirdParty#-Labelsize:#WM_LABEL_SIZE=32|64exportWM_LABEL_SIZE=64#-MPIimplementation:#WM_MPLIB=SYSTEMOPENMPI|OPENMPI|SYSTEMMPI|\MPICH|MPICH-GM|HPMPI#|MPI|QSMPI|SGIMPIexportWM_MPLIB=OPENMPI
Edittheconfigura0on/sedngfiles
• EditOpenFOAM-4.0compiler/librariessedngfile
$ vi../OpenFOAM-4.0/etc/config.sh/compiler
case"$WM_COMPILER_TYPE"inOpenFOAM|ThirdParty)#DefaultversionsofGMP,MPFRandMPC,overrideasnecessarygmp_version=gmp-5.1.2mpfr_version=mpfr-3.1.2mpc_version=mpc-1.0.1case"$WM_COMPILER"inGcc|Gcc48)gcc_version=gcc-4.8.5
Edittheconfigura0on/sedngfiles
• EditThirdParty-4.0/makeCGAL
$ vimakeCGAL
#GetCGAL,boostandgmp/mpfrversions.$WM_PROJECT_DIR/etc/config.sh/functions_foamEvalSOURCE_CGAL_VERSIONS_ONLY=yes\$($WM_PROJECT_DIR/bin/foamEtcFileconfig.sh/CGAL)_foamSource$($WM_PROJECT_DIR/bin/foamEtcFileconfig.sh/compiler)set-xcgalPACKAGE=${cgal_version:-CGAL-4.8}boostPACKAGE=boost_1_58_0gmpPACKAGE=gmp-5.1.2mpfrPACKAGE=mpfr-3.1.2
Edittheconfigura0on/sedngfiles
• EditCGAL
$ vi../OpenFOAM-4.0/etc/config.sh/CGAL
#Description#SetupfileforCGAL(&boost)include/libraries.#SourcedfromOpenFOAM-<VERSION>/etc/bashrc#---------------------------------------------------------boost_version=boost_1_58_0#cgal_version=cgal-systemcgal_version=CGAL-4.8
Compilethetools/libraries
• ReloadtheOpenFOAMenvironmentfileandcompileGCC:
$ ./opt/OpenFOAM/OpenFOAM-4.0/etc/bashrc
Warningin/opt/OpenFOAM/OpenFOAM-4.0/etc/config.sh/settings:Cannotfind/opt/OpenFOAM/ThirdParty-4.0/platforms/linux64/gcc-4.8.5installation.Pleaseinstallthiscompilerversionorifyouwishtousethesystemcompiler,changethe'WM_COMPILER_TYPE'settingto'system'
$ ./makeGcc
Compilethetools/libraries
• BuildCMakeandexecuteAllwmake:
• BuildOpenFOAM:
• ASerthecompiling,checkit:
$ ./makeCmake$ ./opt/OpenFOAM/OpenFOAM-4.0/etc/bashrc$ ./Allwmake
$ ./opt/OpenFOAM/OpenFOAM-4.0/etc/bashrc$ cd/opt/OpenFOAM/OpenFOAM-4.0/$ ./Allwmake–j4#-j4dependingonyourmachine
$ ./opt/OpenFOAM/OpenFOAM-4.0/etc/bashrc$ foamInstallationTest
CompileParaViewanditsreader
• BuildQt– ShellscriptforQtcompilingisnotincludedinThirdParty4.0.
$ cd/opt/OpenFOAM/ThirdParty-4.0$ cp/opt/OpenFOAM/ThirdParty-3.0.x/makeQt./$ cp/opt/OpenFOAM/ThirdParty-3.0.x/etc/tools/QtFunctions\./etc/tools/$ vimakeQt
#Description#Buildscriptforqt-everywhere-opensource-src#---------------------------------------------------------qtVERSION=4.8.6qtTYPE=qt-everywhere-opensource-src
$ ./makeQt
CompileParaViewanditsreader
• CompileParaView5.0.1 $ vimakeParaView
#SetthepathtotheQt-4.5(orlater)qmakeifthe\systemQtisolderQMAKE_PATH="/opt/OpenFOAM/ThirdParty-4.0/\platforms/linux64Gcc/qt-4.8.6/bin"#SetthepathtocmakeCMAKE_PATH="/opt/OpenFOAM/ThirdParty-4.0/\platforms/linux64Gcc/cmake-3.2.1/bin"
$ ./makeParaView
CompileParaViewanditsreader
• CompileParaViewreader
• ASerthecompiling,checkatutorialrun(cavity):
$ cd$FOAM_UTILITIES/postProcessing/graphics/PVReaders$ ./Allwclean$ ./Allwmake
$ ./opt/OpenFOAM/OpenFOAM-4.0/etc/bashrc$ mkdir–p$FOAM_RUN$ run$ cp–r$FOAM_TUTORIALS/incompressible/icoFoam/\ cavity/cavity./$ cdcavity$ blockMesh$ icoFoam$ paraFoam
Herewego!Enjoy!