spe detroit sec4on technical dinner mee4ng spe detroit section...
TRANSCRIPT
Volume 60 ▲
Num
ber 2
DE
TR
OIT
SEC
TIO
N - SO
CIE
TY
OF P
LAST
ICS E
NG
INE
ER
S - “TH
E C
HA
RT
ER
CH
AP
TE
R”
Octob
er 2015
SPE Detroit Sec4on Technical Dinner Mee4ng
“Plas4cs Engineering Technology at Ferris State University” Monday, October 26, 2015
5:00 – 8:00 pm
SPE Detroit Section Technical Dinner Meeting
“Plastics Engineering Technology at Ferris State University”
Monday, October 26, 20155:00 – 8:00 pm
Visit the Detroit Section website for details
(http://www.spedetroit.org)
Proudly sponsored
by
In this issue: A Review of the Detroit Section Technical Dinner Meeting at Kettering University
September 14, 2015
To be held at the Troy Marriott, Troy MIVisit our TPO Website to Register and find more details (http://www.auto-tpo.com)Use our TPO2015 Guide on your computer, smartphone, and tablet to review the complete agenda cross-linked with the speakers listing (htpps://goo.gl/6FP1ma)
www.SPEdetroit.org2
President’s MessageDr. Adrian Merrington
Midland Compounding and Consulting
President
And Then Something Magical Happens…..
If you’re reading this message then you’re probably somehow involved with the Detroit Section of the Society of Plastics Engineers. And being involved with SPE Detroit, you might wonder how events or even this newsletter come together. SPE Detroit runs on the strength of its volunteer base. Contrary to the title of this piece, nothing magically just happens. It happens because of the hard work put in by dedicated volunteers who believe in SPE’s mission. SPE’s Mission? “The mission of the Society of Plastics Engineers is to promote scientific and engineering knowledge relating to plastics worldwide and to educate industry, academia, and the public about these advances.”
So, how do we get there from here? We get there by having people willing to give up their free time and focus their efforts in one area or another (or, for some, in many areas) so we can offer the services we provide. Those services might be publications, conferences, technical presentations, scholarships, educational liaisons, etc., etc. The list
really is too long to include here but a smattering of what we do is included on our website: spedetroit.org.
And as we’re talking about the website, let’s start with our Communications Committee. Irv Poston leads a committed team of webmasters (Marc Bahm), newsletter editors (Eve Vitale) and those who post on social media sites (I get involved here) which helps get our message out. Having professional-looking communications with our membership helps establish Detroit SPE as a superior organization. The newsletter is nationally recognized as being a quality product and has received numerous SPE awards for its content and design. Our website was recently updated and is constantly evolving to meet current needs. More recently, people have been able to get the latest information about our activities by subscribing to one form of social media or another (LinkedIn, Facebook, Twitter and SPE’s The Chain). All of our communication mechanisms help us maintain a well-informed membership and general public.
Our conferences are internationally recognized as having some of the best technical content and greatest
www.SPEdetroit.org 3
networking opportunities available. Even conferences put on by professional entities, whose livelihood depends on their ability to attract attendees, often pale in comparison (you can likely tell how proud I am to be associated with the people who put on our conferences). Our TPO Conference, chaired by Sassan Tarahomi, and Auto EPCON, chaired by Sandra McClelland and Gary Kogowski, in addition to producing exceptional content, also have a little friendly rivalry over which is our top money-earner.
Our Education Committee has become one of our Section’s crowning jewels. Sandra McClelland has grown this group to include full Student Chapters at Ferris State, Michigan State, Kettering University, and Schoolcraft College, and we’re developing programs at the University of Michigan, Saginaw Valley State, Delta College and Mid-Michigan Community College. Developing programs is one thing, keeping them active and involved takes a combination of faculty members, student volunteers and SPE Detroit liaisons. And, of course, the funds to do what needs to be done. But universities and colleges aren’t our only outreach. Tom Miller and Todd Hogan organize PlastiVan visits to local area schools and educational events and use these visits as a means to promote our annual Essay Competition. Tom is also in charge of the committee that hands out thousands of dollars in student scholarships each year. And for
those who have just left education and entered the workplace, Furkan Akdemir and Maheen Khan chair our Next Generation committee.
Being able to do all of this work is not cheap. We are blessed with some tremendous section sponsors that include BASF Performance Materials North America, Ravago Manufacturing, ENTEC, Chase Plastics, Vantage Plastics, Maple Press and Midland Compounding and Consulting. If you’re interested in Sponsorship, please talk to Chris Surbrook ([email protected]) or Bob Petrach ([email protected]). With Dawn Cooper ([email protected]), Chris also co-chairs the Material Auction that sees us auction donated resins to also raise funds for educational outreach.
And of course, I haven’t even started to discuss the group of volunteers needed just to keep the Section running. But perhaps that’s a topic for another piece.
If you are interested in getting more involved yourself, the first step is easy. Contact Keith Siopes ([email protected]), let him know your skill set and interests, and we’re more than happy to put you to work (and grateful that you volunteer too!).
Adrian MerringtonPresident, Detroit Section of SPE
www.SPEdetroit.org4
BASF high-performance materials are smart—and yes, beautiful.Offering greater design flexibility, lighter weight parts, shorter production times and lower costs than traditional materials, our plastics and polyurethane solutions can be found inside and out of some of the world’s most popular automobiles. From seating to instrument panels and consoles to suspension, we’re at the heart of many intelligent design and manufacturing solutions. Because at BASF Performance Materials, we create chemistry for a more beautiful tomorrow. And a better ride.
www.performance-materials.basf.us
that lets beauty love brains.
We create chemistry
www.SPEdetroit.org 5
September Technical Dinner RecapBob Petrach – Safety Technology International
SPE Detroit Secretary and Technical Program Chair
For those of you who missed the 2015-2016 Kickoff meeting at Kettering University, you missed an eventful meeting. Below are a few of the highlights:
Adrian Merrington, our new president, kicked it off by thanking event sponsor BASF and table sponsors Asahi Kasei, IAC, PolyOne, Techno Polymer and Trinseo. He then did a quick synopsis of SPE Detroit Section activities before turning the podium over to Awards Chair, Nippani Rao.
Nippani presented the 2015 Outstanding Member Award to Dr. Sassan Tarahomi followed by the Lifetime Achievement Award to Pete Grelle.
Sassan then presented Star Awards to Dr. Gary Kogowski and Dr. Adrian Merrington.
Sassan also presented the President’s Special Recognition Award to Sandra McClelland, SPE Detroit Councilor and Education Committee Chair, for her years of service to the Section, divisions, and SPE International, and for the personal support and guidance she’d given him the past year.
Sandra McClelland, in her role as Education Committee Chair noted SPE Detroit has three named scholarships with the SPE Foundation: the Tom Powers Scholarship, The Norm Kakarala Scholarship, and the Education Award in honor of Fred Schwab. With excitement she introduced two new named SPE Detroit Section Scholarships to be given annually--the Delta Polymers and Professor Reginald Bell Scholarships.
Delta Polymers is a small company, yet it has provided a tremendous amount of support to the SPE Detroit Section including three past presidents.
Shane Alexander of Kettering University was presented with the first Delta Polymers Scholarship.
The Professor Reginald Bell Scholarship was presented to Christopher Orr of the University of Michigan. Chris has pushed tirelessly to establish a student chapter at U of M.
I was given the chance to say a few words about the remarkable person that was Professor Reginald Bell and his legacy of inspiration to all students (and non-students) with over 50 years of teaching and his tireless support for the plastics industry.
Sandra mentioned the opportunity to be a part of the Great Lakes Bay STEM Festival to be held at Delta College September 25th and 26th. The Detroit Section of SPE will be sponsoring a booth to showcase plastics and is seeking SPE members to help staff the booth Friday and Saturday.
Finally we got to the program about the Plastics Program at Kettering University presented by Mark Richardson, manufacturing engineering lecturer. Mark outlined the program and his vision of supporting his two customers – the students and the plastics industry. After the presentation, Mr. Richardson, Dillon Frost, president of the Plastics Engineering Club, and Dr. Susan Farhat, assistant professor of chemical engineering, gave tours of the Polymer
www.SPEdetroit.org6
Processing Lab and the Chemical Engineering Labs. You can read more about plastics at Kettering in last month’s newsletter. http://spedetroit.org/wp-content/uploads/2015/08/SPE15SeptNewsletter4web.pdf
Since 1942
Our fearless leaders who are continuing a long tradition of service and education to
the plastics industry.
Dr. Adrian Merrington, SPE Detroit PresidentDr. Sassan Tarahomi, SPE Detroit Past President
Nylon 6 and 66
Engineered TPE’s
Post-Consumer and Post-Industrial Recycled Nylon and PP Compounds
Performance Polypropylene Compounds
Ravago ManufactuRing
aMeRicasglobal Reach – local solutions
1 9 0 0 S um m i t T o w er Blv d . S t e 9 0 0 Or l a n d o , F L 3 2 8 1 0 ~ 9 3 1 . 7 2 8 . 7 0 0 9 ~ w w w. r ava g o m f g . c o m
Featuring
Enviramid®Echo®Hylon®Enflex®EZprene®Ensoft®
Featuring
Enviramid®Echo®Hylon®Enflex®EZprene®Ensoft®
RavagoHlf13_3 1 3/4/13 11:33 AM
www.SPEdetroit.org 7
2014 -‐ 2015 Detroit Section Awards Presented at September’s Technical Dinner Nippani Rao, Awards Committee Chair and Director Emeritus Asahi Kasei Plastics North America [picture of Nippani Rao
Outstanding Member Award – Dr. Sassan Tarahomi
The criteria for this award are exceptional contributions to the
Detroit Section for a minimum of seven years, significant contributions to the plastics industry, and
participation in the greater society (SPE).
Dr. Sassan Tarahomi SPE Detroit Section 2014-‐2015 Outstanding Member
Star Awards – Dr. Adrian Merrington and Dr. Gary Kogowski The criterion for this award is Detroit Section individual achievement over two or more years. There is a
maximum of two recipients per year. This award is decided by a vote of the Board. Repeat winners possible after a
five year lapse.
Dr. Adrian Merrington and Dr. Gary Kogowski SPE Detroit Section 2014-‐2015 Star
Awards (Bob Petrach accepting for Dr. Kogowski)
2014 - 2015 Detroit Section Awards Presented at
September’s Technical DinnerNippani Rao
Awards Committee Chair and Director EmeritusAsahi Kasei Plastics North America
www.SPEdetroit.org8
Lifetime Achievement Award – Peter Grelle
The criteria for this award are: “SPE members who have had long productive careers and belong to the Detroit SPE Section.” It has also been called the “Unsung Hero” award.
Peter Grelle SPE Detroit Section 2014-‐2015 Lifetime Achievement Award
Peter F. Grelle has been employed in the plastics industry for over forty (40) years and has been a member of the Society of Plastics Engineers since 1972. He is currently owner/president of Plastics Fundamentals Group LLC, a company specializing in training and consulting, and part-‐time instructor in the Plastics Technology Program at Schoolcraft College, Livonia, Michigan. He was employed nearly twenty (20) years with The Dow Chemical Company, and prior to Dow was employed by the Monsanto Company, the Winchester Group of Olin Corporation, and Wellman Inc. Plastics Division. Peter received his B.S. in Plastics Technology from Lowell Technological Institute, and his M.S. in Plastics Engineering from the University of Massachusetts at Lowell. He holds four (4) US and international patents in plastics product design, and has authored and co-‐authored forty (40) publications in the areas of plastics part design, plastics materials, structural foam molding, recycling, and plastics process technology.
Peter is the recipient of the 2000 Engineer of the Year Award from the Injection Molding Division of the SPE, the 2001 SPI Structural Plastics Division Industry Recognition Award, and the 2006 SPE Honored Service Award. He has also received four (4) Best Paper Awards from the Society of the Plastics Industry (SPI) Structural Plastics Division, the Society of Plastics Engineers (SPE) Injection Molding Division, and the Society of Automotive Engineers (SAE). Peter has also received the 2011 and 2013 Star Awards from the SPE Detroit Section.
Since 2009, Peter has been a member of the SPE Detroit Section Board of Directors and was Detroit Section President from 2013-‐2014. Since 1991, he has been a member of the SPE Injection Molding Division Board of Directors and was Injection Molding Division Chairperson from 1997-‐1998. Peter currently serves as the SPE Injection Molding Division Technical Director. Peter was also a member of the SPE Rochester, New York Section Board of Directors from 1993 to 1996.
www.SPEdetroit.org 9
Special Recognition Award – Sandra McClelland
This award is given to an individual who has gone above and beyond the call of duty in forwarding the Section’s mission, and is at the discretion of the President. These award winners are recognized as being an integral part of the success of the Detroit SPE Section.
Sandra McClelland SPE Detroit Section 2014-‐2015 Special Recognition Award
Inaugural Delta Polymers Achievement Award – Shane Alexander This scholarship is given to honor Delta Polymers and the tremendous amount of support it has given to SPE over the years. The criteria for the scholarship are active SPE involvement and support, professional scholarship application, internship/co-‐op experience and a commitment to academic excellence. Shane Alexander, Kettering University SPE Detroit Section 2014-‐2015 Delta Polymers Achievement Award
www.SPEdetroit.org10
Would you like the Plastivan to visit the school in your area?
Please contact Tom Miller at [email protected].
Schedules for school year 2015-2016 are being made now.
October 4-7, 2015 17th Annual SPE
Auto-TPO ConferenceTroy Marriott
http://auto-tpo.com/
October 26, 2015 FSU Plastics Program
Ferris State Univ, Big Rapids, MI
November 16, 2015 Plant Visit
Linear Mold and Engineering, Livonia, MI
Inaugural Professor Reginald Bell Outstanding Student Scholarship – Christopher Orr
This scholarship is given to honor Kettering University Professor Reginald Bell, who passed away in 2015 after 52 years of unprecedented commitment to his students and the plastics industry. The criteria for the scholarship are active SPE involvement and support, professional scholarship application, internship/co-‐op experience and a commitment to academic excellence. Christopher Orr, University of Michigan SPE Detroit Section 2014-‐2015 Professor Reginald Bell Outstanding Student Scholarship
www.SPEdetroit.org 11
Tribute to Professor Reg Bell at the September Technical Dinner Meeting at Kettering University
Bob Petrach – Safety Technology InternationalKettering University (GMI) Alumnus
What can I say about Reg Bell, about his influence on me and where I am today? Forty-five years ago, it would have been 4th week of A Section, two weeks to go before back to work. Being a Monday evening, I’d have been studying. By then I already had been touched by Reg. His Chem1 class was fun and I learned.
I can’t say he introduced me to plastics – I’d already seen that at Fisher Body Elyria earlier that summer with polyurethane seats. And I never had him for a class after Freshman 1. That’s not to say I didn’t run into him from time to time, and he’d ask how it was going and give some advice or just a kind word.
He almost handed out self confidence, confidence that you could master the subject at hand – any subject; a feeling that life was joyful and success at GMI and in life was possible and the possibilities were endless. He found a way to teach—to mentor—to encourage you to grow as a person and be comfortable with yourself and others. He was open to all, valued all, and showed you how to value, accept, and help others.
I counted 244 persons with entries on the Sharing Memories of Professor Bell page at Kettering.edu: https://www.kettering.edu/remembering-professor-reg-bell/sharing-memories-professor-bell
I did not post anything there, I didn’t even recognize the names of those who did and yet I know hundreds of people who were touched by him and loved him. I never played ping pong or basketball with him, shared a meal, gave him a 59 Caddy or did the Harlem Shake (https://www.youtube.com/watch?v=s9n_2FJZ3vU) with him.
But I—like 50,000 of those before and after me—I was his favorite student, and that was real.
He’ll be greatly missed. RIP Reg –thank you.
A celebration of Professor Reg Bell’s Life will be held in the Recreation Center at Kettering University on Friday, October 23 at 3:00 pm with refreshments immediately following in the Sunset Room.
Reg Bell at Yellowstone National Park overlooking the Grand Prismatic Spring in 2014. He was traveling with former student, Tyler Finnegan, and former Provost, Dr. Robert Simpson and his wife, Pen.
www.SPEdetroit.org12
2015-2016 SPE Detroit SectionScholarship Recipients
Thomas Miller - BASF Performance MaterialsScholarship Committee
2015-‐2016 SPE Detroit Section Scholarship Recipients Thomas Miller, BASF Performance Materials Scholarship Committee [picture of Tom Miller – See pg 10 of October, 2014 newsletter] The SPE Detroit Section Scholarship Committee is pleased to announce our 2015-‐2016 scholarship recipients, including two new scholarship awards that were initiated this year. The Professor Reginald Bell Outstanding Student Award of $5,000 was established in honor of Professor Bell and his 50+ years as a dedicated Kettering University faculty member best known for taking an active and caring role in the lives of innumerable students. The SPE Detroit Section Scholarship Committee will present this award on an annual basis to one student that presents exceptional credentials while demonstrating a commitment to excellence in the classroom and their outstanding leadership as a student member of the SPE Detroit Section. 2015-‐2016 Dr. Reginald Bell Outstanding Student Award -‐ Christopher Orr, University of Michigan Chemical Engineering Student
Christopher Orr, a chemical engineering major at the University of Michigan, is this year’s Professor Reginald Bell Outstanding Student Award Winner. Christopher’s excellent GPA and strong leadership in founding the new U of M Student SPE Chapter helped him win this prestigious scholarship. A keen interest in plastics was developed during his father’s 30-‐year career in the industry. An internship with BASF solidified his appreciation for plastics. He joined SPE in the summer of 2014 after hearing about it from his program advisor, Susan Montgomery. His subsequent time at BASF put him in contact with Tom Miller, a very active member of SPE and an important volunteer with the Detroit Section. With such great mentoring he decided to form the student chapter when he returned to Ann Arbor in the fall.
The fledgling chapter has approximately 20 students and is currently recruiting new members. Although they don’t meet regularly, there is regular communication with the group. Christopher is working to schedule local volunteering opportunities for the SPE students as well as encouraging participation in Detroit’s many activities and networking events. He hopes to schedule a plant tour sometime during the semester. Christopher will be graduating in December and is excited to report he has accepted a position with BASF starting next spring. The good news for all of us is that he is committed to his SPE membership. “SPE has been a great experience for me, and does a great job bridging the gap between students and industry; it has provided me with many opportunities. I hope to do the same for students in the future.” Congratulations, Christopher! We’re happy and proud to count you in our Next Generation of SPE members. If you would like offer a plant tour experience for U of M students, please contact Tom Miller, the U of M liaison for Detroit SPE, at [email protected]. [email protected].
www.SPEdetroit.org 13
Making Changes in the Plastics Industry SPE Detroit Scholarship Application Essay by Christopher Orr With just one semester left until graduation, I have had the privilege of working in industry the past two summers. In this time, I have gained a true appreciation for the chemical industry as a whole, including small and large scale production, as well as research and development. As a Production Chemist Intern with BASF, I have seen firsthand the incredible opportunities for growth and improvement within all chemical technologies and I believe a career in the plastics industry is an ideal place to be in order to promote this growth. Plastics are used, directly or indirectly, in just about every product and process in today’s economy. The vast applications and uses for plastics is overwhelming; however, I believe there are countless other uses that have yet to be identified, and I am hopeful to explore innovative ways to apply existing materials. On the other hand, I am also excited to explore original, hybrid products that can be used to improve existing products and potentially be implemented in brand new applications. After gaining some technical expertise, I hope to transition into the business management aspect of the industry. Depending on my career path, I intend to return to school at some point to study business, and hopefully earn an M.B.A. I plan to utilize my technical expertise and innovative thinking at the forefront of the plastics industry and help create new markets and penetrate existing ones with ground-‐breaking products. I hope to eventually become a leader within the business and help move the industry forward, developing new products, satisfying new customers, and solving new problems. The plastics industry is ever-‐changing and will continue to morph and adapt to the demands of today’s economy and regulations. I hope to one day be a part of this change. The Delta Polymers Achievement Award was established to recognize Delta Polymers long-‐term commitment and support of the SPE Detroit Section by awarding an additional $1,000 to one student each year based on their commitment to excellence in the classroom and active involvement in their respective SPE Student Chapter. 2015-‐2016 Delta Polymers Achievement Award -‐ Shane Alexander, Kettering University Mechanical Engineering Student
My Composites Engineering Future SPE Detroit Scholarship Application Essay by Shane Alexander
When I first attended Kettering University as an eager undergraduate engineering student, plastics engineering was not a high interest of mine. Then I joined Kettering University’s Plastics Engineering Club and became aware how plastics impact everyday life and how important the plastics industry is. My time as a member of the Plastic Engineering Club has allowed me to familiarize myself with many plastics processes such as extrusion, vacuum thermoforming, and injection molding all at a hands-‐on level. Also, I have visited companies through SPE that have broadened my plastics industry experience. I now understand how important the plastics industry is to daily life and that makes me want to be a part of it for my engineering career.
www.SPEdetroit.org14
My Kettering co-‐op has allowed me to become familiar with the composites sector of the plastics industry. I work for the Advanced Technology Group (ATG) of Hendrickson International. Our division’s main purpose is the research and development of products that will be commercial from 3-‐5 years in the future. After graduation from Kettering I would like to continue my work at ATG. I enjoy working with composites and I see the potential for our company to grow in that direction. I enjoy working on the manufacturing and testing side of the parts. The design is interesting and important but I will do my best work on the lab floor being hands-‐on. Composites not only add the benefit of the high strength and stiffness, but they are lightweight. If I do not work for Hendrickson when I graduate then I want to be involved in the aerospace industry. Aerospace has been using composite materials and plastics for decades and they will continue to do so. I would like to work with the outer skin/structures of the aircraft because there are many manufacturing challenges to overcome when dealing with the flawless composite parts and the distinct shape of various aircraft. I have a passion for aviation and have my private pilot license. Using my knowledge about plastics from Kettering’s Plastics Engineering Club, my composites knowledge from my co-‐op, and experience as a pilot I would be a well-‐rounded engineer in the aerospace field. The plastics industry is very large and has many sectors. I believe that the composites sector is where I will enjoy my career because of all of my current experiences as being a part of the Society of Plastics Engineers. C:\Users\Mark And Eve\Documents\SPE\Newsletter\October 2015\Final October 2015\Oct 2015 New Schol Winers 9-‐18 EV.Docx
Sponsor Adver,sing Guidelines
We need sponsors for the Trends & Topics Newsle8er! To reach our members SPE Detroit Sec,on distributes an electronic Newsle8er 6 ,mes a year. All ads are full color and copies of the newsle8er are posted on the Detroit Sec,on website. A limited number of copies will only be printed to promote the sec,on at various shows. Acceptable file formats for adver,sing include: • Portable Document Files (PDF) preferred:
Smallest file size, or images a 96 – 100 DPI. Fonts must be imbedded. • Photoshop *.,f Files:
96 – 100 DPI resolu,on, RGB color model. • JPG Files:
Low to medium resolu,on, RGB color model. • Adobe InDesign CS 5 Files:
Files can be converted in-‐house to web content. If any other formats are to be submi8ed, please contact Jim at Maple Press, 248.733.9669, fax 248.307.0819, or orders@maplepressprin,ng.com. In addi,on to the ad, Sponsors of PC level and greater, will have the opportunity to publish a press release once per year. Note: Artwork approved for your first newsle8er is the artwork that will be used for the en,re year.
Please contact , Chris Surbrook at 989-‐495-‐9367, or 989-‐205-‐6960 Email: [email protected], or Bob Petrach at: [email protected], for space reserva,ons.
Sizes Available
rPE Level $500
1/16th Page Color Ad 1-‐15/16” x 2-‐3/8”
(49.2125 mm x 60.3245mm)
ABS Level $750
1/8th Page Color Ad 1-‐15/16” x 4-‐3/4”
(49.2125 mm x 120.6499mm)
PC Level $1000
1/4th Page Color Ad 3-‐7/8” x 4-‐3/4”
(98.4249 mm x 120.6499mm)
PPS Level $1500
1/2 Page Color Ad 7-‐3/4” x 4-‐3/4”
(196.8499 mm x 120.6499mm)
PEEK Level $2500
Full Page Color Ad
7-‐3/4” x 10-‐1/4” (196.8499 mm x 260.3499mm)
Adver,sing rates are based on a 6 ,me run star,ng in September. Please email or call for informa,on on other Sponsorship opportuni,es or less than full year rates aeer October 1st.
www.SPEdetroit.org 15
Paul Kizer, Kettering University -‐ $2,000 Senior–Mechanical Engineering/Applied Physics I have been attending Kettering's Society of Plastics Engineers club for two years and during that time I have participated in many of the club sponsored activities such as touring local plastics processing plants, attending Society of Plastics Engineers functions and participating in labs that are held during club meetings. Being a part of the club inspired me to take an introduction to polymer science course that Kettering offers. In the course I learned about the relationship between polymer structures and engineering properties, we discussed a lot of popular polymers and processes used to create various products. In the future I plan to graduate with a Bachelor of Science in Mechanical Engineering with a minor in Business. I hope to use this to start a career in the automotive field and because of the Society of Plastics Engineers I now realize that plastics are a large part of that and I am very open to a career in the plastics industry.
Ryan Webster, Kettering University -‐ $500 Senior—Mechanical Engineering Ever since I received my uncle’s Legos at the age of 10 I have been captivated by design. My first real encounter with plastics and engineering occurred when taking Kettering’s engineering materials course. This intro to plastics sparked my interest. I joined SPE, the Plastics Engineering Club and took an intro to polymers course taught by Professor Reg Bell. I am continuously intrigued by the designs that are made possible by choosing to manufacture parts out of plastics verses traditional materials like steel and aluminum. My intent after school is to work around the design and manufacturing aspects of injection and blow molding operations. As vice president I hope to continue to provide impactful leadership for Kettering’s Plastics Engineering Club.
Kristina Hughes, Michigan State University -‐ $1,500 Senior—Packaging Engineering & Psychology Within the Plastics Industry, there is a wealth of opportunities for sustainability. Between the research of new bio-‐based plastics and the reduction of materials used, it is possible to work sustainability into any project. Personally, I am interested in research for increasing the amount of environmentally friendly plastic compositions. I also would like to be a part of the design process someday, but the sustainability of the industry seems to be a more pertinent subject. The Plastics Industry has a considerable effect on the environmental. It would be an honor of mine to help improve upon our situation to strive for a better, less harmful, environmental impact.
Sean Catt, Kettering University -‐ $2,000 Senior—Mechanical/Industrial Engineering
Since my time in Mark Richardson’s Intro to Manufacturing Engineering course at Kettering I have always wanted to become involved with plastics engineering. In his class we had the opportunity to work in his plastics research lab with a single-‐screw extruder and injection molding equipment, recycling plastic and creating new moldings. I saw first-‐hand how practical plastics engineering is and the many industries it could serve. I sought co-‐op employment with Asahi Kasei. After graduation I hope to attain a full-‐time position with Asahi Kasei. I feel that my background in mechanical and industrial engineering could complement the background of colleagues with chemical or plastics engineering degrees. Ultimately, the plastics industry is growing at an astonishing rate. It is my goal to put my education to great use in the plastics industry as it continues to grow in the worldwide marketplace.
www.SPEdetroit.org16
Tyler Bylsma, Kettering University -‐ $2,000 Senior—Mechanical Engineering My career in the plastics industry is a relatively new one that I plan on making into a lifelong career. Right from the start I learned about plastics in my Intro to Manufacturing class. I learned about and used processes to create everyday projects. My interest in plastics engineering started at school, developed at my co-‐op, and continues as I keep learning. My current interest in plastics in mostly with 3D printers. I am interested in applying 3D printers to the medical field. I can see the benefits for both physicians and patients. 3D printing can be used to create customized parts for each patient. Kettering and my co-‐op have shaped my interest in plastics engineering. I hope to continue expanding my knowledge in the future. It is my desire to use plastics engineering to continuously improve patient care for all.
Charles Mancino, Kettering University -‐ $1,500 Senior—Industrial Engineering
My career aspirations in the Plastics Industry include embracing new plastic technology and introducing new products made out of plastics. These aspirations led me to take an Introduction to Polymer Science class and join the Society of Plastics Engineers (SPE), both of which allowed me to see where plastics are used in the industry that I want work in, the automotive industry. From body panels to experimental engines, the significance of plastics in the modern automobile cannot be underestimated. In addition to the innovations that plastics have brought in the automotive world, 3D printing has been made possible by plastics. This is significant in the engineering world since prototype parts made from plastics to check for fitment and actual sizes are less expensive than having them made out of metal and is something that I have had to do at my co-‐op at Tenneco. Plastics have already made a big impact on the world; I hope that I can continue to let its impact grow with my knowledge.
Brandon Douglas, Ferris State University -‐ $2,400 Senior—Polymer Science & Plastics Engineering The summer of 2012 was the start of my life in manufacturing. I worked as a temp in a blow molding plant that summer, and although it was not a glorious job it did give me early exposure to how a full scale operation works. The fast pace and excitement of seeing a product go from pellet to customers hands is what drove me to continue in manufacturing. So far in my college career I have worked in personal care, safety products, and professional products. I would like to continue to expand my portfolio of products, process and material knowledge by working closely with the process in a position where I can also grow my leadership skills. I believe projects like leading a team for a design of experiment or qualifying a product launch will achieve this. This will also allow me to find an area of the market that I am most passionate about.
Heath Harding, Ferris State University -‐ $2,100 Senior—Polymer Science & Plastics Engineering Having the opportunity to be graduating into an industry with no limits is one of the greatest benefits about studying Plastics Engineering at Ferris. I firmly believe that the instructors in the program have abundant knowledge in every aspect of the plastics industry. Each course at Ferris is designed to help us choose what we want to do; from manufacturing, materials, product development, and even sales. The opportunities are endless. I worked in the Materials Group at General Motors last summer. I learned about material specifications and gained a thorough understanding of the material selection process. After graduation I plan to continue my education at Boston University getting a Master’s of Science in Materials Science and Engineering. I appreciate the efforts of SPE to support students throughout the learning process.
www.SPEdetroit.org 17
Eli Fesler, Ferris State University -‐ $2,000 Junior—Polymer Science & Plastics Engineering
The plastics industry has slowly but surely become my home over the last three years. I have had the opportunity to take advantage of some amazing experiences and meet some inspiring and wonderful individuals. The group of engineers that inhabit the industry have made it possible for me to gain an education that is practical, analytical, and technical. They have allowed me opportunities to grow both as a student and as a man, and the industry has opened my eyes to many diverse and exciting areas which I can choose to pursue upon graduation. The plastics industry will be my home for a long time to come, in some way shape or form. That home will hopefully be a place that I can lean on to form a career, learn for a lifetime, and help others do the same.
Thomas Plegue, University of Michigan -‐ $1,500 Junior—Chemical Engineering This summer I have learned a lot about the plastic industry by working as an intern at BASF. I had the opportunity to attend a variety of seminars to learn about new innovations in the industry. 3D printing has always interested me, especially for medical applications. I find 3D printing interesting because it allows for more innovation since it allows for more product and medical customization. As companies and universities are beginning to expand their 3D printing research to find new materials for the printer, 3D printing research is only going to expand. . I plan on going back to graduate school after finishing my undergraduate education to work on my PhD in chemical engineering. I think 3D printing and biocompatible materials can have a huge influence in the medicine and I look forward to being a part of it.
Seth Carncros, Ferris State University -‐ $1,500 Junior—Polymer Science & Plastics Engineering After touring Ferris State University and getting information from Professor Speirs, I knew Ferris was where I wanted to attend, and more specifically, the Plastics Engineering Program was to be my major. Once I obtain my degree in Plastics Engineering, I plan to pursue a full time position with a medical molding company. It is my career goal to continue my advancement as an engineer. Once positioned in my career, it is also my goal to give back to various Plastics and Polymer programs throughout the United States and support future students in their endeavors to graduate in this field with the same passion and commitment that I have for my career.
Dillon Frost, Kettering University -‐ $2,100 Junior—Chemical Engineering I am currently attending Kettering University’s Chemical Engineering program and have an interest in polymers/materials science and processing. I work at Asahi Kasei Plastics North America in Fowlerville, MI and have been there for four terms, equivalent to a year of work. From this experience I have fostered an interest and fascination with polymers and plastics in our world. I’ve seen some of the events that the Society of Plastics Engineers hosts and how truly great the organization is as a whole. SPE is working to unite and advance an industry that has limitless potential. This is a society, an industry, and a science that I want to be a part of. I plan to be part of this growing field and to help further the way plastics are processed, created, used, reused, and recycled. All of these factors work towards making this a safer, greener, more efficient world!
www.SPEdetroit.org18
Jake Stevens, Kettering University -‐ $2,100 Junior—Industrial Engineering Although some are pessimistic of plastics viability in the near future; given its versatility and recyclability, plastics are here to stay. I’m employed by Daimler where the majority of my impact has been derived from efficiency evaluations and product design solutions. Given the trajectory of the plastics industry, I am confident plastics will be increasingly utilized in the automotive field, especially in European and North American markets. In conjunction with my career aspirations, I plan to implement cutting-‐edge plastic compounds into the world market. This aspiration is pronounced by my thesis work which is focused on developing a new plastic compound and implementing it into a universally utilized automotive component.
Troy DeLong, Kettering University -‐ $1,600 Junior—Mechanical Engineering I knew Engineering was my field of study ever since I was about 10 because I have always just loved building things and thinking of how to make things better. Engineering is definitely my passion, and I am glad that I have the opportunity to pursue my passion at Kettering University. I knew I wanted to be and engineer since I was a kid, but I didn’t know what I wanted to do as an engineer. I just knew I wanted to design and build things. That all has changed within the past 2 years of my college career and work experience at Dart Container. Dart is known for their high quality polystyrene and plastic dinnerware. And soon to be a whole new line of polypropylene cups. I now know what I am interested in and what I would like to do for a career one day and that is design machines that produce plastic, polystyrene and polypropylene products and I believe that SPE can help me greatly with that.
William Brockman, Ferris State University -‐ $1,000 Sophomore—Polymer Science & Plastics Engineering I selected the Plastics and Polymers Engineering degree at FSU because it seemed very interesting to me. During my sophomore year of high school I was asked to take an eighteen week introductory course in composite engineering. The course was in a Petoskey boat shop. We learned about various types of fiberglass and resins. I hope to become a project manager in the plastics industry.
Julie Rieland, University of Michigan -‐ $1,000 Sophomore—Material Science & Engineering I’ve wanted to work in a chemistry field since I took my first chemistry class in high school; and since an organics course in my senior year, I have had the dream of working on the creation and manufacture of biodegradable and non-‐petroleum based polymers. Current plastics are made to last, and in some cases—like in buildings, cars, and furniture—this is good, because these things need to last many dozens of years; however, for disposable goods, this is very detrimental to the environment. I believe that there is a way to create plastics with a “shelf life” of 2-‐5 years by creating monomers with substituents that encourage natural decomposition when in conducive environments. I genuinely love chemistry. As my dad says, “If you love your job, you will never work a day in your life”.
www.SPEdetroit.org 19
Samantha Chouinard, Michigan State University -‐ $1,000 Sophomore—Packaging Engineering From the beginning of my education, the idea of creation and the engineering behind everyday objects spiked my interest. Now, as a sophomore packaging major, I have been able to have a peek into how packages are made and the raw materials that are used. Plastic is in almost everything from the clothes we wear to the cars we drive. The versatility that plastic holds can be taken advantage of to better the environment as well. Due to plastic’s ability to be recycled and reused, one package can be be made into another one and not put to waste. I want to play a large role in reusing plastics; I want to use my career in packaging to better the environment and continue with the use of plastics in everyday products. As I progress in the plastics industry I plan to maintain membership in the SPE and would like to be a leader and further progress the industry.
Calloway Salmon, Kettering University -‐ $750 Freshman—Mechanical Engineering Growing up you are always asked the same question, what you want to be when you grow up. As I went through schooling I found I had a strong passion for how objects are designed and made. I realized I could turn this passion into a career with an education at Kettering University and a co-‐op at General Motors. When most people open the hood of a car they just see an engine, fuse box and some tubing. I on the other hand see many areas of the car that can be transformed from metal parts to plastic. A major goal in the auto industry today is weight reduction, which leads to better fuel economy. The possibilities for plastic are endless. There is no way to predict what will happen in the future, but we sure can make an educated guess. I believe that most components in a car’s engine bay in the next 10 years will go from heavy metal to plastics. Plastic can withstand severe driving conditions and extreme temperatures while performing at the highest level.
Demetri Blackwood, Kettering University -‐ $750 Freshman—Mechanical Engineering My interest in the field of plastics did not just emerge with my entry into Kettering University, but it has surely extended my scope into what plastics really encompasses. As a native of Jamaica, I am bombarded with what we call ‘plastic waste’ and there are poor attempts at recycling such waste. As an advocate for change, I took part in numerous recycling efforts to get the level of plastic pollution under control in my homeland. Back then my knowledge was just limited to the recycling aspect of plastics. The benefits of plastics are yet to be explored in its entirety. I have been steadily following the advent of polymer nanoparticles in cancer treatment and the experimental outcomes have proved to be more beneficial than dreaded chemotherapy. Without a doubt, I want to be a part of this plastic revolution. My participation in SPE and the engineering courses I am now taking will surely provide the foundation I will need to become an agent of change in plastics engineering. C:\Users\Mark And Eve\Documents\SPE\Newsletter\October 2015\Final October 2015\Oct 2015 Scholarship Winners 9-‐18 EV.Docx
Newsletter SponsorsBASF Automotive • Chase Plastics
Entec Polymers • Maple Press • Midland Compounding
Ravago Americas • Vantage Plastics
www.SPEdetroit.org20
Technical Meeting ProgramsBob Petrach – Safety Technology International
SPE Detroit Section members, for those of you who missed it, our 2015-2016 Kick off meeting at Kettering University in September was a success. We have many more events and activities planned for you. Below you will see current state of program schedule. Our webmaster Marc Bahm has information about the October 26 program at Ferris State University and the November 16 plant visit to Linear Mold and Engineering in Livonia. You can find all you need to know here: http://spedetroit.org/?page_id=35.
Just remember, we do prefer everyone to pre-register by sending an email to Ms. Karen Rhodes-Parker ([email protected].) It is a must for the Linear Mold visit as there is a limit of 20. Specific details for events will be published at least a couple of months in advance to make sure everyone has a chance to plan to attend.
Don’t forget to attend the TPO Conference at the Troy Marriott Sunday, October 4 through Wednesday, October 7.
We have other events in the planning stage. We are hoping to fill our calendar so that all of our members, even given our wide geographical area, can attend conveniently. If you have any ideas for a presentation or a tour, let me ([email protected]) or Sassan ([email protected]) know. We’ll work to get it set up. I hope to see many of you in the upcoming events.
Mac HD:Users:Production:Library:Mail Downloads:Oct 2015 Tech Program Overview 9-‐18 EV.Docx
Technical Meeting Programs Bob Petrach Safety Technology International [picture of Bob Petrach] SPE Detroit Section members, for those of you who missed it, our 2015-‐2016 Kick off meeting at Kettering University in September was a success. We have many more events and activities planned for you. Below you will see current state of program schedule. Our webmaster Marc Bahm has information about the October 26 program at Ferris State University and the November 16 plant visit to Linear Mold and Engineering in Livonia. You can find all you need to know here: http://spedetroit.org/?page_id=35. Just remember, we do prefer everyone to pre-‐register by sending an email to Ms. Karen Rhodes-‐Parker ([email protected].) It is a must for the Linear Mold visit as there is a limit of 20. Specific details for events will be published at least a couple of months in advance to make sure everyone has a chance to plan to attend. Don’t forget to attend the TPO Conference at the Troy Marriott Sunday, October 4 through Wednesday, October 7.
We have other events in the planning stage. We are hoping to fill our calendar so that all of our members, even given our wide geographical area, can attend conveniently. If you have any ideas for a presentation or a tour, let me ([email protected]) or Sassan ([email protected]) know. We’ll work to get it set up. I hope to see many of you in the upcoming events. Yours truly, Bob Petrach SPE Detroit Section Technical Program Co-‐Chair
www.SPEdetroit.org 21
SPE Detroit Section Technical Dinner Meeting and Tour
Ferris State University - Plastics Engineering Technology
Date: Monday October 26, 2015 Time: 5:00 – 8:00 PM Location: Ferris State University Plastics and Rubber programs National Elastomer Center 919 Campus Drive Big Rapids, MI 49307 Agenda: 5:00 PM Arrival and Networking 5:30 PM MEAL TBD (Pizza / Sandwich) 6:00 PM Presentation of program 7:00 PM Facilities Review/Tour 8:00 PM Program Ends
Cost: Free to students, University faculties and SPE members, non-members $10 Link to Campus map
Directions Link Map:
Please RSVP with Ms. Karen Rhodes-Parker at or call at 248-244-8993 Ext. 3
As someone who enjoys chemistry, physics, problem solving and technology, then you should take a look at the four degree options in these fields. The Bachelor of Science degrees in Plastics Engineering Technology and Rubber Engineering Technology are compliments to the Associate in Applied Science degrees in Plastics Technology and Rubber Technology, as well as any other manufacturing associate in applied science degree offered. As medical fields continue booming, so is the quest for new instruments and devices, many of which are comprised of specialty plastic components. Graduates from these Ferris
programs are changing the way we use and re-‐use plastic. The Ferris Plastics program is the largest and one of the most respected undergraduate programs in the United States. The B.S. program was started in 1982 and continues to fill a great need in the growing plastics industry for technically trained personnel. About 1.3 million people across the country work in plastics, making it our fourth largest industry. Ferris graduates gain immediate status as recognized technical leaders. This innovative program provides students with a background that includes topics such as plastics process, material testing and properties, and product development. Classes emphasize hands-‐on learning, using the same type of equipment that is currently used in industry. An exceptional 80 percent of the entering students receive their degree. The plastics industry has long shown support for the Ferris Plastics Technology program, even sponsoring the construction of the Plastics Building, which in 1998 was expanded into the National Elastomer Center with state-‐of-‐the-‐art laboratories and classrooms. Many companies actively support us by donating equipment and materials, making on-‐campus presentations and sponsoring field trips to their facilities.
http://www.ferris.edu/htmls/ferrisfaq/maps/Campus_Map_Color.pdf
http://www.ferris.edu/htmls/ferrisfaq/direct/htm
mailto: [email protected]
www.SPEdetroit.org22
The PlastiVan™ Outreach Education Program is a great way to excite middle- and high-school students about the vast opportunities the plastics industry has to offer. The PlastiVan™ Program educators travel to schools educating students about the chemistry, history, processing, manufacturing, sustainability and applications of plastics. The program is easily integrated into school curricula through the National Standards for Science and Technology.
The PlastiVan™ Program provides sound science and educational programs which spark scientific curiosity in students while increasing their knowledge of the contributions that plastics make to modern life, encouraging them to seek careers in engineering.
Partnering with Local and Regional BusinessPlastics industry companies and other organizations—such as trade schools and community colleges are encouraged to introduce their community to the marvels of plastics by sponsoring a visit from the PlastiVan™ Program. If the company chooses, time will be allotted for a company representative to address the students about their products, processes and career opportunities.
Sponsoring companies nurture the development of their future workforce by opening student’s minds to careers in science, engineering, technology and mathematics (STEM), subjects that are explored on a daily basis in the plastics industry. In addition, the PlastiVan™ Program benefits the sponsoring company by increasing the company’s visibility in the community-often garnering local media coverage, changing the publics’ perception of the industry, and positively affecting the lives and minds of the community.
Sponsorship of the PlastiVan™ Outreach Education Program is a tax-deductible donation.
For more information, please contact:
Marjorie WeinerPH: +1 [email protected]
SPE’S PLASTIVAN™: DRIVING OPPORTUNITIES IN PLASTICS
Society of Plastics Engineers w 6 Berkshire Boulevard, Suite 306 w Bethel, CT 06801 USA
www.SPEdetroit.org 23
2016 "Wonders of Plastics" Essay Contest The Society of Plastics Engineers (SPE) presents the 20th annual “Wonders of Plastics” essay contest. Open to all middle/junior high and high school students, the essay must meet certain requirements (see Requirements for Submission, p 2).
Topics to consider Advantages of plastics in food packaging Creative use of recycled plastics How plastics benefit humankind How plastics improve our lifestyle
Plastics in the environment Plastics usefulness in society What plastics has done for me Why the bad reputation of plastics is wrong
All essay submissions must be received at the SPE Section address, listed below, along with the entry form, by the announced deadline.
Awards for 1st – 3rd Place Entries from BOTH Sections 1st Place: $500 In addition, winning entries from the North and South sections will be published in the Detroit Section Newsletter. 2nd Place: $250 3rd Place: $100 Entry forms may be copied, but each essay must be attached to a form; essays will not be returned and become the property of SPE.
Submit your Essays to: SPE Detroit Section North SPE Detroit Section South Todd Hogan – Contest Chair Tom Miller – Contest Chair The Dow Chemical Company BASF Corporation 200 Larkin Center 1609 Biddle Avenue 1501 Larkin Center Drive Wyandotte, MI 48192 Midland, MI 48674 Tel: 810-225-1720 Tel: 989-636-5303 Email: Email: All entries must be received by February 28, 2016!
Society of Plastics Engineers – Detroit Section
[email protected]@BASF.com
www.SPEdetroit.org24
2016 SPE Detroit Section “Wonders of Plastics” Essay Contest 2
REQUIREMENTS FOR SUBMISSION
General Length: Between 500 and 1,000 words Format: Typewritten in English on 8 ½ x 11 paper (for North America), title to
appear as heading on each page; no name on any page except the entry form that must accompany each essay; 1-inch margins minimum on all sides
Organization The organization structure of the essay should be “logical,” including the following considerations: Introduction: Optional Thesis: Several sentences Development: This section should be several paragraphs and should discuss the theme,
analyze it, feature informal research about the theme, etc. Conclusion: This section should be at least one paragraph in which the author
summarizes the ideas presented in the essay
Mechanics Spelling should be correct; syntax should be readable; punctuation should be conventional. Essay should be free of sentence fragments. Diction (word choice) should be appropriate to the subject and the writer’s understanding of the topic. Point of view should be appropriate to the topic/subject and remain constant and consistent. A mixture of first and third person is acceptable if it is appropriate to the voice of the essay. However, the use of second person (“you” either stated directly or implied) will change the “voice” of the essay in a manner damaging to its effectiveness. Footnotes and references must be included when necessary.
Judging A panel consisting of 3 judges will judge essays. In order to be a finalist, the essay must meet all the conditions as stated in the organization and mechanics above, with only incidental errors in mechanics. It must meet the assigned minimum length and must be submitted following the prescribed format.
www.SPEdetroit.org 25
2016 SPE Detroit Section “Wonders of Plastics” Essay Contest 3
ENTRY FORM Title: By: Type or print About the author(s) Name(s) Age Age Grade in School Address(es) Phone Number(s) E-mail(s) About the school School Address City/State/Zip Phone/Fax Teacher Class
SPE Detroit Section North SPE Detroit Section South Todd Hogan – Contest Chair Tom Miller – Contest Chair The Dow Chemical Company BASF Corporation 433 Building 1609 Biddle Avenue Midland, MI 48667 Wyandotte, MI 48192 Tel: 989-636-5303 Tel: 810-225-1720 Email: Email: Entry must be received by February 28, 2016!
www.SPEdetroit.org26
JIM ALEXANDER
31211 Stephenson Hwy., Ste 100Madison Heights, MI [email protected]
p: 248 733 9669f: 248 307 1777
Councilor’s ReportSandra McClelland
Solvay Specialty Polymers
The next Councilor meeting is in Pittsburgh, October 9-11. It should be a great meeting. The Governance Task Force will present an initial proposal for possible changes in the governance structure. The goal of the committee is to make the Society able to conduct business easier and with more relevance for the membership. Watch for the next report and announcements that may be on The Chain.
The SPE Plastics Environmental Division has been approved to formally change its name to the SPE Sustainability Division. The Division made this request to more accurately reflect the nature of their work.
Serving All Your PlASticS needS Since 1985
A Global Company with a Market Focus
1900 Summit Tower Blvd, Ste 900 ~ Orl ando, FL 32810407 .875 .9595 ~ www.entecresins .com
www.SPEdetroit.org 27
The Chain is 4 you! The Chain is a part of the SPE International web for members only. It can be reached from the SPE International website www.4spe.org, the SPE Detroit Section website www.spedetroit.org, or directly at thechain.4spe.org. Log in with your email address and the password you have selected for SPE activities. Join the Detroit Board Community to keep up to date with Detroit Section activities and to communicate with us.
The Chain is a glorified social media email platform developed by SPE to enhance your membership experience. The Chain provides tools for you to:
• Share information
• Ask for help
• Discuss problems
• Exchange lessons learned
• Search for information
• Stay connected with other SPE members
The Chain offers many Places for you to go. In addition to the Detroit Board Community, you may also wish to visit other Places such as:
• Tech Talk -- the latest technical issues and innovations
• SPE Cafe -- topics outside of the ‘technical’ box
• Leadership Lane -- share advice and best practices for other volunteers
• Career Central -- identify job opportunities with the best employers
• Campus Connection -- get answers to hot topics of interest
e-Communications Irv Poston – General Motors (retired)
Next-daydelivery
More materialsin stock
No minimumorder size
Redefining Resin Distribution
through FLEXIBILITY
800-23-CHASE | ChasePlastics.com
www.SPEdetroit.org28
Click on www.SPEdetroit.org on any page to go to our website.
Click on hyperlinks and Sponsors’ Advertisements to go to websites for more information.
Click on the Bookmark icon in the left-side Navigation Panel to go to specific places in the Newsletter.
Detroit Sectionsociety of plastics engineers, inc.1800 Crooks RoadTroy, MI 48084
DETROIT SECTION EXECUTIVE BOARD and COMMITTEE MEMBERS FOR 2015-2016Title Name Company O/W Phone Cell Phone EmailPresident Adrian Merrington Midland Compounding, Inc. 989-495-9367 [email protected] Elect Wayne Hertlein Wilbert Plastic Services 248-953-7826 [email protected] Vice President Chris Surbrook Midland Compounding, Inc 989-495-9367 [email protected] Vice President Gary Kogowski Entec Polymers/Ravago Americas 248-797-7433 [email protected] President Sassan Tarahomi IAC 248-455-3981 248-259-5624 [email protected] Tom Powers Consultant 248-877-0689 [email protected] Sandra McClelland Solvay Speciality Polymers 586-264-0063 586-292-1794 [email protected] Bob Petrach Safety Technology International, Inc. 248-703-5995 [email protected] Emeritus Irv Poston Retired (GM) 248-646-9574 [email protected]
Nippani Rao Asahi Kasei Plastics 248-444-1753 [email protected] Powers Consultant 248-877-0689 [email protected] Kakarala Inteva Products Retired 248-433-1227 [email protected] Price Global Polymer Solutions 248-738-5504 248.563.6343 [email protected]
COMMITTEE CHAIRS FOR 2015-2016Advertising Co-Chair Bob Petrach Safety Technology International, Inc. 248-618-6809 248-703-5995 [email protected]
Co-Chair Chris Surbrook Midland Compounding, Inc 989-495-9367 [email protected] Conference Co-Chair Gary Kogowski Entec Polymers/Ravago Americas 248-797-7433 [email protected]
Co-Chair Sandra McClelland Solvay Speciality Polymers 586-264-0063 586-292-1794 [email protected] Co-Chair Nippani Rao Asahi Kasei Plastics 248-444-1753 [email protected]
Co-Chair Pete Grelle Plastics Fundamentals Group LLC 248-752-2611 [email protected] / Web Content Co-Chair Irv Poston Retired (GM) 248-646-9574 [email protected]
Co-Chair Marc Bahm BASF 248-496-2811 [email protected] Adrian Merrington Michigan Molecular Institute 989-832-5555 ext 638 [email protected]
SPE Foundation/Education Fund Co-Chair Tom Powers Consultant 248-877-0689 [email protected] Sandra McClelland Solvay Speciality Polymers 586-264-0063 586-292-1794 [email protected]
House/Programs Co-Chair Sassan Tarahomi IAC 248-455-3981 248-259-5624 [email protected] Bob Petrach Safety Technology International, Inc. 248-703-5995 [email protected]
Intersociety Wayne Hertlein Wilbert Plastic Services 248-953-7826 [email protected] Material Auction Co-Chair Dawn Cooper Uniplas, Inc. 248-486-1449 [email protected]
Co-Chair Chris Surbrook Midland Compounding, Inc 989-495-9367 [email protected] Christopher Lafayette Kettering University 248-249-1911 [email protected] Editor Eve Vitale Series One LLC [email protected]/ Elections Co-Chair Irv Poston Retired (GM) 248-646-9574 [email protected]
Co-Chair Nippani Rao Asahi Kasei Plastics 248-444-1753 [email protected] & Essay Contest Co-Chair Tom Miller BASF 586-291-5289 [email protected]
Co-Chair Todd Hogan Dow Chemical Co. 989-636-5303 [email protected] Interest Co-Chair Dawn Cooper Uniplas, Inc. 248-486-1449 [email protected]
Co-Chair Patricia Ewald DME 248-544-5787 [email protected] Co-Chair Tom Miller BASF 586-291-5289 [email protected]
Co-Chair Adrian Merrington Midland Compounding, Inc. 989-495-9367 [email protected] Sandra McClelland Solvay Speciality Polymers 586-264-0063 586-292-1794 [email protected] Programs TPO Sassan Tarahomi IAC 248-455-3981 248-259-5624 [email protected]
AutoEPCON Sandra McClelland Solvay Speciality Polymers 586-264-0063 586-292-1794 [email protected] Conference Co-Chair Sassan Tarahomi IAC 248-455-3981 248-259-5624 [email protected]
Co-Chair David O’Konski General Motors 248-521-9101 [email protected] Co-Chair Marc Bahm BASF 248-496-2811 [email protected]
Co-Chair Adrian Merrington Midland Compounding, Inc. 989-495-9367 [email protected] Co-Chair Tom Powers Consultant 248-877-0689 [email protected]
Co-Chair Wayne Hertlein Wilbert Plastic Services 248-953-7826 [email protected] Generation Advisor Co-Chair Furkan Akdemir Elastron USA, Inc. 248-946-2214 [email protected]
Co-Chair Maheen Khan [email protected] Outing Co-Chair Nippani Rao Asahi Kasei Plastics 248-444-1753 [email protected]
Bo
ard
of
Dir
ecto
rs
Term Ending 6/2016 Term Ending 6/2017 Term Ending 6/2018 AdminstrativeTom Miller
[email protected] Cooper
[email protected] Keeler
[email protected] V. Petrach, Jr.
[email protected] Shereda
Bill [email protected]
Marc [email protected]
Chris [email protected]
Todd [email protected]
Wayne [email protected]
Pete [email protected]
Adrian [email protected]
Steven [email protected]
Gary [email protected]
Karen Rhodes-Parker248-244-8993 248-244-8920
[email protected] SPE Detroit website
www.SPEdetroit.orgTPO Conference
www.auto-TPO.comSPE International www.4spe.org