specialists in hazardous area equipment - …€¦ · specialists in hazardous area equipment quick...
TRANSCRIPT
2
INTRODUCTION
LED
LED Product Range Page 5
LEDs - The Bright Future Page 6
Nevis LED Bulkhead Page 10
Solas LED Floodlight Page 10
Nexled LED Bulkhead Page 11
Nexled Em LED Bulkhead Page 11
Nexled Escape Route LED Bulkhead Page 11
Nexxus II LED Bulkhead Page 12
Starline LED Street Lantern Page 12
INTRODUCTION
ZONE 1
ZONE 2
Protecta n Fluorescent Page 18
Sterling II Fluorescent Page 18
Sterling II S/S Fluorescent Page 18
800 Series Floodlight Page 19
Micronex and Maxinex Floodlights Page 19
503 Floodlight Page 19
Nexxus Bulkhead Page 20
Eclipse II Well–Glass Page 20
Eclipse Junior Well–Glass Page 20
INDUSTRIAL
Protecta Fluorescent Page 21
Protecta Em Fluorescent Page 21
Protecta S/S Fluorescent Page 21
Sterling II Fluorescent Page 22
Sterling II H/F Fluorescent Page 22
Sterling II S/S Fluorescent Page 23
Sterling II S/S H/F Fluorescent Page 23
Acclaim Recessible Fluorescent Page 24
Curie Recessible Fluorescent Page 24
Nexxus Bulkhead Page 24
800 Series Floodlight Page 25
Micronex and Maxinex Floodlights Page 25
Dexlux Floodlight Page 25
503 Floodlight Page 26
Eclipse II Well–Glass Page 26
Eclipse Junior Well–Glass Page 26
Starline Street Lantern Page 27
Contact details Page 27
Protecta III Fluorescent Page 13
Protecta III Em Fluorescent Page 13
Protecta III S/S Fluorescent Page 13
Acclaim Recessible Fluorescent Page 14
Curie Elite Recessible Fluorescent Page 14
Lomond Fluorescent Page 14
Evolution II Asymmetric Floodlight Page 15
Evolution Floodlight Page 15
Evolution Junior Floodlight Page 15
Nevis Bulkhead Page 16
216 Well–Glass Page 16
238 Well–Glass Page 17
261 Well–Glass Page 17
Universal Control Gear Box Page 17
CONTENTS
Contents Page 2
Chalmit History Page 3
ChalmLite 5 Page 4
3
CHALMIT HISTORY
INTRODUCTION
Chalmit®, formerly known as Andrew Chalmers and Mitchellwas formed in 1910 as a supplier of marine equipment toshipyards in the west of Scotland.
Today the company is one of the largest and most respectedhazardous area and marine lighting companies in the worldand supplies product internationally through sales officesand agents located in over 40 countries.
As part of the Hubbell Harsh and Hazardous division,Chalmit® can offer a global range of IEC & NEC productssuitable for hazardous area lighting and apparatusinstallations on any continent and complying with allinternational codes and standards.
In addition to hazardous area luminaires, Chalmit® hasin-house facilities for the design and manufacture offluorescent and HID control gear. This capability providesChalmit® with the ability to create ballasts tailored to meetthe specific requirements of individual luminaires. Thesebespoke design services are also available to our customersupon request.
World Leader in Hazardous Area Lighting
4
INTRODUCTION
555ChalmLite
Chalmit® has developed a user friendly programme to allow our customers the freedom of producingtheir own lighting designs. This package, CHALMLITE 5 is free of charge and allows users the ability todesign lighting layouts that range from very simple to extremely complex.
CHALMLITE 5 utilises a simple Windows-based user interface making it easy to use. The package now
includes interior, exterior and aisle lighting quantity estimators allowing luminaire quantities to be
determined quickly for budgetary purposes prior to a detailed design being done at a later date.
Some key features of CHALMLITE 5 include:
• Modern, user-friendly appearance
• Ground up re-design to utilise modern processor speeds and graphics
• Industry focused functionality whilst retaining its simplicity
• Improved import/export – DWG/DXF and PDF
• Utilisation of multi-core capabilities
• Tear-off tabs
• Improved luminaire selection
• Enhanced photometric database with luminaire images and wireframes
• Power mode switching within a single calculation
• Additional luminaire array methods
• Switchable “real time” calculations
• User definable obstructions and ceilings
• Able to draw round/complex rooms and grids
• False colour contours – 2D and 3D
• Simplified Estimator controls
CHALMITPO Box 5575, Glasgow G52 9AP, Scotland
Tel: +44 (0) 141 882 5555 Fax: +44 (0) 141 883 3704
www.chalmit.com
LED
LED PRODUCT RANGE
Chalmit® has over a century’s worth of experiencein providing cutting edge lighting solutions tohazardous and marine markets. We understand theunique characteristics of LED technology and have aproven track record, pioneering the world’s firstZone 1 LED luminaire; the Nexled back in 2005.
As a business we have invested in the developmentof solid state lighting technologies to developsolutions that meet the exacting requirements ofthe Oil, Gas & Petrochemical industries.
The result is a proven and reliable range of LEDluminaries that compliment and enhance ourfluorescent and HID products.
At the heart of each new design is our underlyingphilosophy – quality, reliability and lowmaintenance.
Benefits of LED lighting
* 60,000 hours expected at 40°C ambient L70/B10
• Ideally suited to operation in low temperature environments
• Low power consumption
• Instant on – immediate light output, even in emergency mode
• 60,000 hours continuous operation*
• Environmentally friendly, mercury free
• Ideal replacement for incandescent, mercury vapour & some HID lamp sources
• Constantly improving efficacies and life as LED technology advances
5
LED
Protecta LED
Nevis LED Bulkhead
LEDs - The B
Coding Ex II 2GD Ex de II B Ex tD
Ingress Protection IP66/IP67
Ambient range -55°C to +55°C
Light Output 4,058 lumens
Continuous operation 60,000 hours*
Construction LM6 aluminium withtoughened domed glass
Specification
6
* 60,000 hours expected at 40°C ambient L70/B10
COMING SOON
Suitable for Zone 1 applications
LED
Solas LED Floodlight
Nexled LED Bulkhead
r ight Future
Coding Ex II 2 GD Ex de IIB GbEx tb IIIC T100°C Db IP6X
Ingress Protection IP66/IP67
Ambient range -55°C to +55°C
Light Output 4,022 lumens
Emergency duration 100% for 90 minutes50% for 3 hours
Continuous operation 60,000 hours*
Construction LM6 aluminium enclosure with toughened glass
Specification
Coding Ex II 2 GD, Ex e ib mb IIC T4
Ingress Protection IP66/IP67
Ambient range -45°C to +55°C
Light Output 2 x 1W – 126 lumens8 x 1W – 504 lumens
Continuous operation 60,000 hours*
Construction Powder coated LM6 aluminium enclosure with toughened glass
Specification
7
* 60,000 hours expected at 40°C ambient L70/B10
LED
Nexled Em LED Bulkhead
Nexled Escape Route LED Bulkhead
LEDs - The B
Specification
Coding Ex II 2 GD Ex e ib mb IIC T4
Ingress Protection IP66/IP67
Ambient range -20°C to +55°C
Light Output 2 x 1W – 126 lumens8 x 1W – 504 lumens
Emergency duration 100% output2W – 3 hours8W – 90 minutes
Continuous operation 60,000 hours*
Construction Powder coated LM6 aluminium enclosure with toughened glass
Coding Ex II 2 GD Ex e ib mb IIC T4Ex II 2 G Ex de IIC T4**Ex II 2 D T100°C**
Ingress Protection IP66/IP67
Ambient range -45°C to +55°C
Light Output 2 x 1W – 107 lumens8 x 1W – 478 lumens
Emergency duration 2W – 3 hours8W – 90 minutes
Continuous operation 60,000 hours*
Construction Powder coated LM6 aluminium enclosure with toughened glass
Specification
8
* 60,000 hours expected at 40°C ambient L70/B10** 24V supply for ATEX only
As shown with optional Exit Sign Kit
LED
Nexxus II LED Bulkhead
Starline LED Street Lantern
r ight Future
Coding Ex II 3GD Ex nR IIC T6 GcEx tc IIIC T70°C DcEx II 2 D Ex tb IIIC T70°C Dc
Ingress Protection IP66/IP67
Ambient range -45°C to +55°C
Light Output 1,260 lumens
Continuous operation 60,000 hours*
Construction Powder coated LM6 aluminium enclosure with toughened glass
Specification
9
COMING SOON
Suitable for Industrial applications
* 60,000 hours expected at 40°C ambient L70/B10
LED
Nevis LED Bulkhead
Solas LED Floodlight
• Suitable for Zone 1 applications • Certified Ex II 2 GD Ex de IIB Gb, Ex tb IIIC T100°C Db IP6X• IP66/IP67 • -55°C to +55°C • LM6 aluminium enclosure with toughened domed glass and captive cover screws
• Over 60,000 hours continuous operation* • Equivalent performance with a 70W HPS lamp• Ex e cable entries and looping as standard
* 60,000 hours expected at 40°C ambient L70/B10
Part No Power Consumption
NEVD/022/LE 49W (22 x LEDs)
• Suitable for Zone 1 applications • Certified Ex II 2 GD Ex de IIB T5 Gb, Ex tb IIIC T100°C Db IP6X• IP66/IP67 • -55°C to +55°C • Wide & narrow beam versions available • LM6 aluminium enclosure with toughened glass
• 100% emergency output for 90 minutes duration • Non-maintained or maintained versions available• Emergency inhibition • Over 60,000 hours continuous operation*
• Equivalent performance with a 70W HPS lamp for its application • Industrial version available* 60,000 hours expected at 40°C ambient L70/B10
Part No Power Consumption
SOLD/034/LE 62W (34 x LEDs)
SOLD/034/LE/EM Up to 119W (34 x LEDs)
SOLD/034/LE/EM/NM Up to 62W (34 x LEDs)
10Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
LED
Nexled LED Bulkhead
Nexled Em LED Bulkhead
Nexled Escape Route LED Bulkhead
Part No Power Consumption
NELE/201/LE 6W (2 x LEDs)
NELE/401/LE/24** 8W (4 x LEDs)
NELE/801/LE 11W (8 x LEDs)
• Suitable for Zone 1 applications • Certified Ex II 2 GD Ex e ib mb IIC T4 • IP66/IP67 • -20°C to +55°C• Powder coated LM6 aluminium enclosure with toughened glass • Emergency output duration: (8W) for 90 minutes,
(2W) for 3 hours • Low temperature option -45°C • 100% output in emergency mode • Highly visible, instant white light• Compatible with UPS systems • Industrial version available
Part No Power Consumption
NELE/201/LE/EM 7W (2 x LEDs)
NELE/801/LE/EM 14W (8 x LEDs)
• Suitable for Zone 1 applications• Certified Ex II 2 GD Ex e ib mb IIC T4, Ex II 2 G Ex de IIC T4 (ATEX only), Ex II 2 D T100°C (ATEX only)
• IP66/IP67 • -45°C to +55°C • Powder coated LM6 aluminium enclosure with toughened glass• Emergency output duration: (8W) for 90 minutes, (2W) for 3 hours • Designed for escape route illumination
• Peak response for human eye, green LEDs supplied as standard
Part No Power Consumption
NELE/201/LE/GDE 6W (2 x LEDs)
NELE/401/LE/GDE/24* 8W (4 x LEDs)
NELE/801/LE/GDE 11W (8 x LEDs)
NELE/201/LE/EM/GDE 7W (2 LEDs)
NELE/801/LE/EM/GDE 14W (8 LEDs)
11Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
• Suitable for Zone 1 applications• Certified Ex II 2 GD Ex e mb IIC, Ex II 2 G Ex de IIC T4 (24V supply ATEX only), Ex II 2 D T100°C (24V supply ATEX only)
• IP66/IP67 • -45°C to +55°C • Powder coated LM6 aluminium enclosure with toughened glass • Easy to install and maintain• Very low power consumption • Highly visible, instant white light
• Reduced maintenance – over 60,000 hours continuous operation* • Industrial version available*60,000 hours expected at 40°C ambient L70/B10
** 24V version for ATEX only
* 24V version for ATEX only
As shown with optional Exit Sign Kit
LED
• Suitable for Zone 2 applications• Certified Ex II 3GD Ex nR IIC T6 Gc, Ex tc IIIC T70°C Dc, Ex II 2 D Ex tb IIIC T70°C Dc • IP66/IP67 • -45°C to +55°C
• Powder coated LM6 aluminium enclosure with toughened glass • Highly corrosion resistant• Suitable for ceiling or wall mounting • Fixing points outside restricted breathing enclosure
• Suitable for Zone 21 combustable dust environments • Equivalent performance with 200W GLS (incandescent lamp)
Nexxus II LED Bulkhead
Part No Power Consumption
NE2N/121/LE 19W (12 x LEDs)
12Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
ZONE 1
• Certified Ex II 2 GD Ex e mb q IIC T4 Tamb 55°C • IP66/IP67 • -20°C to +55°C• GRP body with polycarbonate cover • Resistant to voltage fluctuations • Simple rugged construction
• Automatic lamp de-energisation on opening • Quick release mains terminals• End of life (EOL) protection to IEC 60079-7 • Vibration tested to comply with Lloyds/DNV
Protecta III Fluorescent
Protecta III Em Fluorescent
Protecta III S/S Fluorescent
Part No Description
PRGE/218/BI 2 x 18W Bi-pin Fluorescent
PRGE/236/BI 2 x 36W Bi-pin Fluorescent
PRGE/218/MO 2 x 18W Mono-pin Fluorescent
PRGE/236/MO 2 x 36W Mono-pin Fluorescent
• Certified Ex II 2 GD Ex e mb q IIC T4 Tamb 55°C • IP66/IP67 • -20°C to +55°C• GRP body with polycarbonate cover • Emergency output of one lamp: 50% (18W), 25% (36W) for 90 minutes
• High emergency output (36W only) and 3 hour battery options available• Battery management, monitoring and automatic self test • Emergency inhibition
• Automatic lamp de-energisation on opening • End of life (EOL) protection to IEC 60079-7
Part No Description
PRGE/218/BI/EM 2 x 18W Bi-pin Fluorescent
PRGE/236/BI/EM 2 x 36W Bi-pin Fluorescent
PRGE/218/MO/EM 2 x 18W Mono-pin Fluorescent
PRGE/236/MO/EM 2 x 36W Mono-pin Fluorescent
Part No Description
PRSE/218/BI 2 x 18W Bi-pin Fluorescent
PRSE/236/BI 2 x 36W Bi-pin Fluorescent
PRSE/218/BI/EM 2 x 18W Bi-pin Fluorescent
PRSE/236/BI/EM 2 x 36W Bi-pin Fluorescent
PRSE/218/MO 2 x 18W Mono-pin Fluorescent
PRSE/236/MO 2 x 36W Mono-pin Fluorescent
PRSE/218/MO/EM 2 x 18W Mono-pin Fluorescent
PRSE/236/MO/EM 2 x 36W Mono-pin Fluorescent
13Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
• Certified Ex II 2 GD Ex e mb q IIC T4 Tamb 55°C • IP66/IP67 • -20°C to +55°C• Marine grade stainless steel body with polycarbonate cover • Emergency output of one lamp: 50% (18W),
25% (36W) for 90 minutes • High emergency output (36W only) and 3 hour battery options available• Battery management, monitoring and automatic self test • Emergency inhibition
• Automatic lamp de-energisation on opening • End of life (EOL) protection to IEC 60079-7
ZONE 1
• Certified Ex II 2 GD Ex e mb q IIC T4 Tamb 45°C • IP65 • -20°C to +45°C• White polyester painted zinc coated steel body and frame • Emergency output of one lamp: 50% (18W), 25% (36W) for
90 minutes • High emergency output (36W only) and 3 hour battery options available • Emergency inhibition and power off re-start• Battery management, monitoring and automatic self test • End of life (EOL) protection to IEC 60079-7
Acclaim Recessible Fluorescent
Curie Elite Recessible Fluorescent
Lomond Fluorescent
Part No Description
ACLE/218/BI 2 x 18W Bi-pin Fluorescent
ACLE/236/BI 2 x 36W Bi-pin Fluorescent
ACLE/218/BI/EM 2 x 18W Bi-pin Fluorescent
ACLE/236/BI/EM 2 x 36W Bi-pin Fluorescent
• Certified Ex II 2 GD Ex e mb q IIC T4 Tamb 40°C • IP65 • -20 to +40°C • White polyester painted zinc coated steel body andaluminium frame • Emergency output of one lamp: 50% (18W), 25% (36W) for 90 minutes • High emergency output (36W only)
and 3 hour battery options available • Automatic lamp de-energisation on opening • Easy access via front cover for lampreplacement and maintenance • Battery management, monitoring and automatic self test • End of life (EOL) protection to IEC 60079-7
Part No Description
CUEE/218/BI 2 x 18W Bi-pin Fluorescent
CUEE/418/BI 4 x 18W Bi-pin Fluorescent
CUEE/236/BI 2 x 36W Bi-pin Fluorescent
CUEE/436/BI 4 x 36W Bi-pin Fluorescent
CUEE/218/BI/EM 2 x 18W Bi-pin Fluorescent
CUEE/418/BI/EM 4 x 18W Bi-pin Fluorescent
CUEE/236/BI/EM 2 x 36W Bi-pin Fluorescent
CUEE/436/BI/EM 4 x 36W Bi-pin Fluorescent
• Certified Ex II 2 GD Ex d IIC (8W & 18W), Ex II 2 GD Ex d IIB (36W & 58W) • IP66/IP67/IP68 • -20°C to +55°C • LM6 aluminiumenclosure with toughened glass • Emergency output of one lamp: 30% (8W), 28% (18W), 14% (36W), 10% (58W) for 3 hours
• Quick lamp start, flicker free • High frequency electronic control gear • Optional exit sign kit for emergency escape route lighting
Part No Description
LOMD/108/BI 1 x 8W Bi-pin Fluorescent
LOMD/208/BI 2 x 8W Bi-pin Fluorescent
LOMD/218/BI 2 x 18W Bi-pin Fluorescent
LOMD/136/BI 1 x 36W Bi-pin Fluorescent
LOMD/236/BI 2 x 36W Bi-pin Fluorescent
LOMD/158/BI 1 x 58W Bi-pin Fluorescent
LOMD/258/BI 2 x 58W Bi-pin Fluorescent
LOMD/108/BI/EM 1 x 8W Bi-pin Fluorescent
LOMD/218/BI/EM 2 x 18W Bi-pin Fluorescent
LOMD/236/BI/EM 2 x 36W Bi-pin Fluorescent
LOMD/258/BI/EM 2 x 58W Bi-pin Fluorescent
14Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
ZONE 1
Evolution II Asymmetric Floodlight
Evolution Floodlight
Evolution Junior Floodlight
Part No Description
EV2D/150/MS 150W HPS/Metal Halide
EV2D/250/MS 250W HPS/Metal Halide
EV2D/400/MS 400W HPS/Metal Halide
EV2D/600/HS 600W HPS
EV2D/500/TH 500W Single Ended T/Halogen
EV2D/500/TL 500W Linear T/Halogen
Part No Description
EVOD/150/MS 150W HPS/Metal Halide
EVOD/250/MS 250W HPS/Metal Halide
EVOD/400/MS 400W HPS/Metal Halide
EVOD/600/HS 600W HPS
EVOD/500/TH 500W Single Ended T/Halogen
EVOD/500/TL 500W Linear T/Halogen
Part No Description
EVJD/070/MS 70W HPS/Metal Halide
EVJD/300/TL up to 300W T/Halogen
EVJD/150/TL/24 150W 24V T/Halogen
Secondary Glass Shield Part No
EVJD/300/TL/GS up to 300W T/Halogen
EVJD/150/TL/24/GS 150W 24V Tungsten-Halogen
15Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
• Certified Ex II 2 GD Ex de IIC • IP66/IP67 • -50°C to +55°C • LM6 aluminium enclosure with toughened glass• Quick and easy access for maintenance • Exceptional photometric efficiency with reduced glare
• Simple, rapid lamp replacement and flamepath inspection • Timed ignitor as standard
• Certified Ex II 2 GD Ex de IIB • IP66/IP67 • -20°C to +55°C • LM6 aluminium enclosure with toughened glass• Quick and easy access for maintenance • Exceptional photometric efficiency with reduced glare
• Simple, rapid lamp replacement and flamepath inspection • Timed ignitor as standard
• Certified Ex II 2 G Ex d e IIC • IP66/IP67 • +35°C to +55°C • LM6 aluminium enclosure with toughened glass• Quick and easy access for maintenance • Simple, rapid lamp replacement and flamepath inspection
• Exceptional photometric efficiency • Available with secondary protective glass for shot blasting applications
ZONE 1
Nevis Bulkhead
216 Well–Glass
Part No Description
NEVD/050/HS 50W HPS
NEVD/070/MS 70W HPS & Metal Halide
NEVD/080/MV 80W Mercury Vapour
NEVD/125/MV 125W Mercury Vapour
NEVD/200/GL 200W GLS
NEVD/118/CF 1 x 18W 4-pin Compact Fluorescent
NEVD/126/CF 1 x 26W 4-pin Compact Fluorescent
NEVD/055/QL 55W QL
Part No Description
216D/050/HS 50W HPS
216D/070/HS 70W HPS
216D/080/MV 80W Mercury Vapour
216D/100/GL 100W GLS
216D/200/GL 200W GLS
216D/113/CF 1 x 10/13W 4-pin Compact Fluorescent
216D/118/CF 1 x 18W 4-pin Compact Fluorescent
216D/126/CF 1 x 26W 4-pin Compact Fluorescent
216D/213/CF 2 x 10/13W 4-pin Compact Fluorescent
216D/218/CF 2 x 18W 4-pin Compact Fluorescent
16Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
• Certified Ex II Ex de IIB • IP66/IP67 • -55°C to +55°C (lamp dependant)• LM6 aluminium enclosure with toughened glass domed globe and captive cover screws
• Hinged front cover for ease of access • LED version available• Ex e cable entries and looping as standard
• Certified Ex II 2 G Ex d e IIB • IP66/IP67 • -50°C to +55°C• LM6 aluminium enclosure with toughened glass domed globe
• Highly resistant to mechanical damage and corrosion• Anchor chain on glass cover assembly for ease of maintenance
ZONE 1
• Certified Ex II 2 GD Ex de IIB • IP66/IP67 • -50°C to +60°C• LM6 aluminium enclosure with toughened glass dome globe
• Highly resistant to mechanical damage and corrosion• Anchor chain on glass cover assembly for ease of maintenance
238 Well–Glass
261 Well–Glass
Universal Control Gear Box
Part No Description
238D/070/MS 70W HPS/Metal Halide
238D/100/HS 100W HPS
238D/150/MS 150W HPS/Metal Halide
238D/250/MS 250W HPS/Metal Halide
238D/080/MV 80W Mercury Vapour
238D/125/MV 125W Mercury Vapour
238D/250/MV 250W Mercury Vapour
238D/150/GL 150W GLS
238D/200/GL 200W GLS
238D/300/GL 300W GLS
238D/085/QL 85W QL
• Certified Ex II 2 G Ex de IIB • IP66/IP67 • -50°C to +60°C• LM6 aluminium enclosure with toughened glass dome globe
• Highly resistant to mechanical damage and corrosion• Anchor chain on glass cover assembly for ease of maintenance
• Certified Ex II 2 GD Ex dem IIC • IP66/IP67 • -40°C to +50°C• Marine grade stainless steel body • Easy to install
and maintain • Hinged lid with captive fixing screws• Thermal cut-outs fitted on ballast transformer
Part No Description
261D/150/HS 150W HPS
261D/250/HS 250W HPS
261D/400/HS 400W HPS
261D/125/MV 125W Mercury Vapour
261D/250/MV 250W Mercury Vapour
261D/400/MV 400W Mercury Vapour
261D/250/MH 250W Metal Halide
261D/400/MH 400W Metal Halide
261D/500/GL Up to 500W GLS
17Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
Part No Description
UNIE/150/MS 150W HPS/Metal Halide
UNIE/250/MS 250W HPS/Metal Halide
UNIE/400/MS 400W HPS/Metal Halide
UNIE/600/HS 600W HPS
UNIE/500/TF* 500VA Transformer
UNIE/1000/TF* 1000VA Transformer
* 120 to 240V step up transformer boxes for fixedapplications only. (Not portable).
ZONE 2
• Certified Ex II 3 GD Ex nA • IP66/IP67 • -20°C to +50°C • GRP body with polycarbonate diffuser • Emergency outputof one lamp: 32% (18W), 14% (36W) for 3 hours • Easy access to suspended control gear tray • High frequency control gear
• End of life (EOL) protection to IEC 60079-7 • Suitable for Zone 21 combustable dust environments
Protecta n Fluorescent
Sterling II Fluorescent
Sterling II S/S Fluorescent
Part No Description
PR2N/218/BI 2 x 18W Bi-pin Fluorescent
PR2N/136/BI 1 x 36W Bi-pin Fluorescent
PR2N/236/BI 2 x 36W Bi-pin Fluorescent
PR2N/218/BI/EM 2 x 18W Bi-pin Fluorescent
PR2N/136/BI/EM 1 x 36W Bi-pin Fluorescent
PR2N/236/BI/EM 2 x 36W Bi-pin Fluorescent
Part No Description
ST2N/218/BI 2 x 18W Bi-pin Fluorescent
ST2N/136/BI 1 x 36W Bi-pin Fluorescent
ST2N/236/BI 2 x 36W Bi-pin Fluorescent
ST2N/158/BI 1 x 58W Bi-pin Fluorescent
ST2N/258/BI 2 x 58W Bi-pin Fluorescent
ST2N/218/BI/EM 2 x 18W Bi-pin Fluorescent
ST2N/136/BI/EM 1 x 36W Bi-pin Fluorescent
ST2N/236/BI/EM 2 x 36W Bi-pin Fluorescent
ST2N/158/BI/EM 1 x 58W Bi-pin Fluorescent
ST2N/258/BI/EM 2 x 58W Bi-pin Fluorescent
• Certified Ex II 3 GD Ex nA II T4 • IP65 • -20°C to +45°C, -20°C to +40°C (emergency) • GRP body with polycarbonate diffuserand stainless steel clips • Through wiring as standard • High frequency control gear • Optional copper/iron control gear
• Simple to install and maintain • End of life (EOL) protection to IEC 60079-7 • Emergency output of one lamp: 32% (18W),14% (36W), 9% (58W) for 3 hours • Switchable mains supply for local operation • LED charge indicator
• Certified Ex II 3 GD Ex nA II T4 • IP65 • -20°C to +45°C• Marine grade stainless steel body with polycarbonate
diffuser • Mains connection terminals fixed to body• Control gear tray suspended for ease of maintenance• High frequency control gear • Optional copper/iron
control gear • Emergency output of one lamp:32% (18W), 14% (36W), 9% (58W) for 3 hours• Switchable mains supply for local operation
• LED charge indicator
Part No Description
SS2N/218/BI 2 x 18W Bi-pin Fluorescent
SS2N/136/BI 1 x 36W Bi-pin Fluorescent
SS2N/236/BI 2 x 36W Bi-pin Fluorescent
SS2N/158/BI 1 x 58W Bi-pin Fluorescent
SS2N/258/BI 2 x 58W Bi-pin Fluorescent
SS2N/218/BI/EM 2 x 18W Bi-pin Fluorescent
SS2N/136/BI/EM 1 x 36W Bi-pin Fluorescent
SS2N/236/BI/EM 2 x 36W Bi-pin Fluorescent
SS2N/158/BI/EM 1 x 58W Bi-pin Fluorescent
SS2N/258/BI/EM 2 x 58W Bi-pin Fluorescent
18Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
ZONE 2
• Certified Ex II 3 GD Ex nR II • IP66/IP67• -45°C to +60°C (lamp dependant)
• Marine grade stainless steel body withtoughened glass window
• Photometrically superior asymmetric reflector• Quick release fasteners for ease of maintenance
* Ignitor only fitted within floodlight. Remote gear box required(see Universal Box).
** c/w IEC control gear 110/120V supply.*** Supplied with remote transformer box for 110/120V supply.
(Control gear fitted for IEC lamps).
800 Series Floodlight
Micronex and Maxinex Floodlights
503 Floodlight
Part No Description
844N/070/MS 70W HPS/Metal Halide
854N/100/HS 100W HPS
854N/150/HS 150W HPS
854N/250/MS 250W HPS/Metal Halide
854N/400/MS* 400W HPS/Metal Halide
854N/500/TH 500W Single Ended T/Halogen
864N/400/MS 400W HPS/Metal Halide
864N/150/HS/120** 150W HPS
864N/250/HS/120** 250W HPS
864N/400/HS/120*** 400W HPS
• Certified Ex II 3 GD Ex nR II (Maxinex), Ex II 3 G Ex nR II (Micronex) • IP66/IP67 • -30°C to +55°C• Black epoxy painted aluminium body and frame with toughened glass window • Photometrically superior asymmetric reflector
• High corrosion resistance • Option available for Zone 22 combustable dust environments (Maxinex only)
Part No Description
MICN/070/MS 70W Double Ended HPS/Metal Halide
MAXN/150/MS 150W HPS/Metal Halide
MAXN/250/MS 250W HPS/Metal Halide
MAXN/400/MS 400W HPS/Metal Halide
• Complies with ATEX directive for use in Zone 2 areas, Ex II 3G Ex n R • -40°C to +70°C • Marine grade aluminium alloy LM6 bodywith toughened glass window • Robust construction • Highly corrosion resistant • Extremely efficient reflector system
Part No Description
503N/600/HS/IG* HPS
503N/1000/TH Single Ended T/Halogen
19Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz (120V exception **/***) Contact sales
for alternative voltage options - Tel +44 (0)141 882 5555
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
* Remote gearbox required (see Universal Box).
Part No Description
Part No Description
Part No Description
ZONE 2
Nexxus Bulkhead
Eclipse II Well–Glass
Eclipse Junior Well–Glass
NEXN/050/HS 50W HPS
NEXN/070/MS 70W HPS/Metal Halide
NEXN/080/MV 80W Mercury Vapour
NEXN/113/CF 1 x 13W Compact Fluorescent
NEXN/118/CF 1 x 18W Compact Fluorescent
NEXN/126/CF 1 x 26W Compact Fluorescent
NEXN/213/CF 2 x 13W Compact Fluorescent
NEXN/218/CF 2 x 18W Compact Fluorescent
NEXN/226/CF 2 x 26W Compact Fluorescent
NEXN/200/GL Up to 200W GLS
EC2N/050/HS 50W HPS
EC2N/070/MS 70W HPS/Metal Halide
EC2N/100/MS 100W HPS/Metal Halide
EC2N/150/MS 150W HPS/Metal Halide
EC2N/250/MS 250W HPS/Metal Halide
EC2N/400/MS 400W HPS/Metal Halide
EC2N/080/MV 80W Mercury Vapour
EC2N/125/MV 125W Mercury Vapour
EC2N/250/MV 250W Mercury Vapour
EC2N/400/MV 400W Mercury Vapour
ECJN/050/HS 50W HPS
ECJN/070/MS 70W HPS/Metal Halide
ECJN/080/MV 80W MBFU
ECJN/125/MV 125W MBFU
ECJN/113/CF 1 x 13W Compact Fluorescent
ECJN/118/CF 1 x 18W Compact Fluorescent
ECJN/126/CF 1 x 26W Compact Fluorescent
ECJN/150/GLS 150W GLS
20Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
• Certified Ex II 3 G Ex nA R II• IP66 • -45°C to +55°C
• Painted aluminium body with fluted glass globe• Optional reflectors available; sealed spun,
dome & angled
• Certified Ex II 3 G EEx nR • IP66/IP67• -45°C to +50°C (lamp dependant)
• Powder coated LM6 aluminium enclosure withtoughened glass • LED version available
• Certified Ex II 3 G Ex nA R • IP66• -45°C to +55°C (lamp dependant)
• Painted aluminium body with fluted glass globe• Optional reflectors available; dome & angled
INDUSTRIAL
Protecta Fluorescent
Protecta Em Fluorescent
Protecta S/S Fluorescent
Part No Description
PRGI/118/BI/HF 1 x 18W Bi-pin Fluorescent
PRGI/218/BI/HF 2 x 18W Bi-pin Fluorescent
PRGI/136/BI/HF 1 x 36W Bi-pin Fluorescent
PRGI/236/BI/HF 2 x 36W Bi-pin Fluorescent
Part No Description
PRGI/118/BI/EM 1 x 18W Bi-pin Fluorescent
PRGI/218/BI/EM 2 x 18W Bi-pin Fluorescent
PRGI/136/BI/EM 1 x 36W Bi-pin Fluorescent
PRGI/236/BI/EM 2 x 36W Bi-pin Fluorescent
Part No Description
PRSI/118/BI/HF 1 x 18W Bi-pin Fluorescent
PRSI/218/BI/HF 2 x 18W Bi-pin Fluorescent
PRSI/136/BI/HF 1 x 36W Bi-pin Fluorescent
PRSI/236/BI/HF 2 x 36W Bi-pin Fluorescent
PRSI/118/BI/EM 1 x 18W Bi-pin Fluorescent
PRSI/218/BI/EM 2 x 18W Bi-pin Fluorescent
PRSI/136/BI/EM 1 x 36W Bi-pin Fluorescent
PRSI/236/BI/EM 2 x 36W Bi-pin Fluorescent
21Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
• IP66/IP67 • GRP body with clear polycarbonate diffuser • Simple rugged construction• High frequency control gear • Quick release mains terminals
• Vibration tested to comply with Lloyds/DNV
• IP66/IP67 • GRP body with clear polycarbonate diffuser • Simple rugged construction• High frequency control gear • Quick release mains terminals • Vibration tested to comply with Lloyds/DNV
• Optional battery monitoring and self-testing control gear• Emergency output of one lamp: 32% (18W), 14% (36W) for 3 hours
• IP66/IP67 • Marine grade stainless steel body with polycarbonate diffuser • High frequency control gear• Quick release mains terminals • Vibration tested to comply with Lloyds/DNV
• Optional battery monitoring and self-testing control gear• Emergency output of one lamp: 32% (18W), 14% (36W) for 3 hours
INDUSTRIAL
• IP65• GRP body with clear polycarbonate diffuser
• Emergency output of one lamp: 32% (18W),14% (36W), 9% (58W) for 3 hours
• Lightweight and slim line construction• Simple to install and maintain
• IP65• GRP body with clear polycarbonate diffuser
• High frequency control gear• Emergency output of one lamp: 32% (18W),
14% (36W), 9% (58W) for 3 hours• Lightweight and slim line construction
• Simple to install and maintain
Sterling II Fluorescent
Part No Description
ST2I/118/BI 1 x 18W Bi-pin Fluorescent
ST2I/218/BI 2 x 18W Bi-pin Fluorescent
ST2I/136/BI 1 x 36W Bi-pin Fluorescent
ST2I/236/BI 2 x 36W Bi-pin Fluorescent
ST2I/158/BI 1 x 58W Bi-pin Fluorescent
ST2I/258/BI 2 x 58W Bi-pin Fluorescent
ST2I/118/BI/EM 1 x 18W Bi-pin Fluorescent
ST2I/218/BI/EM 2 x 18W Bi-pin Fluorescent
ST2I/136/BI/EM 1 x 36W Bi-pin Fluorescent
ST2I/236/BI/EM 2 x 36W Bi-pin Fluorescent
ST2I/158/BI/EM 1 x 58W Bi-pin Fluorescent
ST2I/258/BI/EM 2 x 58W Bi-pin Fluorescent
Sterling II H/F Fluorescent
Part No Description
ST2I/118/BI/HF 1 x 18W Bi-pin Fluorescent
ST2I/218/BI/HF 2 x 18W Bi-pin Fluorescent
ST2I/136/BI/HF 1 x 36W Bi-pin Fluorescent
ST2I/236/BI/HF 2 x 36W Bi-pin Fluorescent
ST2I/158/BI/HF 1 x 58W Bi-pin Fluorescent
ST2I/258/BI/HF 2 x 58W Bi-pin Fluorescent
ST2I/118/BI/EM/HF 1 x 18W Bi-pin Fluorescent
ST2I/218/BI/EM/HF 2 x 18W Bi-pin Fluorescent
ST2I/136/BI/EM/HF 1 x 36W Bi-pin Fluorescent
ST2I/236/BI/EM/HF 2 x 36W Bi-pin Fluorescent
ST2I/158/BI/EM/HF 1 x 58W Bi-pin Fluorescent
ST2I/258/BI/EM/HF 2 x 58W Bi-pin Fluorescent
22Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
Single tapped ballast fitted as standard – wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
INDUSTRIAL
• IP65• Marine grade stainless steel body
with polycarbonate diffuser• Copper/iron control gear
• Emergency output of one lamp: 32% (18W),14% (36W), 9% (58W) for 3 hours
• Mains connection terminals fixed to body• Gear tray suspended and fitted with control
gear for ease of maintenance
• IP65• Marine grade stainless steel body
with polycarbonate diffuser• High frequency control gear
• Emergency output of one lamp: 32% (18W),14% (36W), 9% (58W) for 3 hours
• Mains connection terminals fixed to body• Gear tray suspended and fitted with control
gear for ease of maintenance
Sterling II S/S Fluorescent
Part No Description
SS2I/118/BI 1 x 18W Bi-pin Fluorescent
SS2I/218/BI 2 x 18W Bi-pin Fluorescent
SS2I/136/BI 1 x 36W Bi-pin Fluorescent
SS2I/236/BI 2 x 36W Bi-pin Fluorescent
SS2I/158/BI 1 x 58W Bi-pin Fluorescent
SS2I/258/BI 2 x 58W Bi-pin Fluorescent
SS2I/118/BI/EM 1 x 18W Bi-pin Fluorescent
SS2I/218/BI/EM 2 x 18W Bi-pin Fluorescent
SS2I/136/BI/EM 1 x 36W Bi-pin Fluorescent
SS2I/236/BI/EM 2 x 36W Bi-pin Fluorescent
SS2I/158/BI/EM 1 x 58W Bi-pin Fluorescent
SS2I/258/BI/EM 2 x 58W Bi-pin Fluorescent
Sterling II S/S H/F Fluorescent
Part No Description
SS2I/118/BI/HF 1 x 18W Bi-pin Fluorescent
SS2I/218/BI/HF 2 x 18W Bi-pin Fluorescent
SS2I/136/BI/HF 1 x 36W Bi-pin Fluorescent
SS2I/236/BI/HF 2 x 36W Bi-pin Fluorescent
SS2I/158/BI/HF 1 x 58W Bi-pin Fluorescent
SS2I/258/BI/HF 2 x 58W Bi-pin Fluorescent
SS2I/118/BI/EM/HF 1 x 18W Bi-pin Fluorescent
SS2I/218/BI/EM/HF 2 x 18W Bi-pin Fluorescent
SS2I/136/BI/EM/HF 1 x 36W Bi-pin Fluorescent
SS2I/236/BI/EM/HF 2 x 36W Bi-pin Fluorescent
SS2I/158/BI/EM/HF 1 x 58W Bi-pin Fluorescent
SS2I/258/BI/EM/HF 2 x 58W Bi-pin Fluorescent
23Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
Single tapped ballast fitted as standard – wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
INDUSTRIAL
Acclaim Recessible Fluorescent
Curie Recessible Fluorescent
Nexxus Bulkhead
Part No Description
ACLI/218/BI 2 x 18W Bi-pin Fluorescent
ACLI/236/BI 2 x 36W Bi-pin Fluorescent
ACLI/218/BI/EM 2 x 18W Bi-pin Fluorescent
ACLI/236/BI/EM 2 x 36W Bi-pin Fluorescent
Part No Description
CURI/218/BI 2 x 18W Bi-pin Fluorescent
CURI/418/BI 4 x 18W Bi-pin Fluorescent
CURI/236/BI 2 x 36W Bi-pin Fluorescent
CURI/436/BI 4 x 36W Bi-pin Fluorescent
CURI/218/BI/EM 2 x 18W Bi-pin Fluorescent
CURI/418/BI/EM 4 x 18W Bi-pin Fluorescent
CURI/236/BI/EM 2 x 36W Bi-pin Fluorescent
CURI/436/BI/EM 4 x 36W Bi-pin Fluorescent
Part No Description
NEXI/050/HS 50W HPS
NEXI/070/MS 70W HPS/Metal Halide
NEXI/080/MV 80W Mercury Vapour
NEXI/113/CF 1 x 13W Compact Fluorescent
NEXI/118/CF 1 x 18W Compact Fluorescent
NEXI/126/CF 1 x 26W Compact Fluorescent
NEXI/213/CF 2 x 13W Compact Fluorescent
NEXI/218/CF 2 x 18W Compact Fluorescent
NEXI/226/CF 2 x 26W Compact Fluorescent
NEXI/200/GL 200W GLS
24Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
• IP54 • White polyester painted zintec body and frame with clear polycarbonate diffuser• 3 hours emergency duration • High frequency control gear • Suitable for various ceiling types
• Quick release mains terminals • Optional battery monitoring and automatic self test
• IP44 • White polyester painted zintec body and frame prismatic polycarbonate diffuser• 3 hours emergency duration • 2 lamp emergency mode available • High frequency control gear
• Suitable for solid and modular ceiling types • Optional battery monitoring and automatic self test• Easy access via front cover for lamp replacement and maintenance
• IP66/IP67 • Powder coated LM6 aluminium enclosure with toughened glass • Easy control gear replacement• Highly corrosion resistant • Suitable for ceiling and wall mounting • Through wiring as standard • Prismatic lens
INDUSTRIAL
800 Series Floodlight
Part No Description
MICI/070/MS 70W Double Ended HPS/Metal Halide
MAXI/150/MS 150W HPS/Metal Halide
MAXI/250/MS 250W HPS/Metal Halide
MAXI/400/MS 400W HPS/Metal Halide
Part No Description
DEXI/200/TL 200W Tungsten-Halogen
DEXI/500/TL 500W Tungsten-Halogen
DEXI/1000/TL 1000W Tungsten-Halogen
Part No Description
844I/070/MS 70W HPS/Metal Halide
854I/100/HS 100W HPS
854I/150/MS 150W HPS/Metal Halide
854I/250/MS 250W HPS/Metal Halide
854I/400/MS* 400W HPS/Metal Halide
864I/400/MS 400W HPS/Metal Halide
854I/500/TH 500W Single ended T/Halogen
864I/600/HS* 600W HPS
864I/150/HS/120** 150W HPS
864I/250/HS/120** 250W HPS
864I/400/HS/120*** 400W HPS
25Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
• IP66/IP67• Marine grade stainless steel body
with toughened glass window• Photometrically superior asymmetric reflector
• Quick release fasteners for ease of maintenance
* Ignitor only fitted within floodlight. Remote gear box required(see Universal Box).
** c/w IEC control gear 110/120V supply.*** Supplied with remote transformer box for 110/120V supply.
(Control gear fitted for IEC lamps).
Micronex and Maxinex Floodlights
Dexlux Floodlight
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz (120V exception **/***) Contact sales
for alternative voltage options - Tel +44 (0)141 882 5555
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
• IP66/IP67 • Black epoxy painted aluminium body and frame with toughened glass window• Photometrically superior asymmetric reflector • High corrosion resistance
• Hinged cover for ease of access
• IP66/IP67 • Marine grade stainless steel body with toughened glass window• Suspended front cover for ease of lamp replacement and maintenance • Ignitor fitted as standard
INDUSTRIAL
503 Floodlight
Eclipse II Well–Glass
Eclipse Junior Well–Glass
Part No Description
503I/600/HS/IG 600W HPS
503I/1000/HS/IG 1000W HPS
503I/1000/MH/IG 1000W Metal Halide
503I/2000/MH/IG 2000W Metal Halide
503I/2000/TH 2000W Single Ended T/Halogen
Part No Description
EC2I/050/HS 50W HPS
EC2I/070/MS 70W HPS/Metal Halide
EC2I/100/MS 100W HPS/Metal Halide
EC2I/150/MS 150W HPS/Metal Halide
EC2I/250/MS 250W HPS/Metal Halide
EC2I/400/MS 400W HPS/Metal Halide
EC2I/080/MV 80W Mercury Vapour
EC2I/125/MV 125W Mercury Vapour
EC2I/250/MV 250W Mercury Vapour
EC2I/400/MV 400W Mercury Vapour
Part No Description
ECJI/050/HS 50W HPS
ECJI/070/MS 70W HPS/Metal Halide
ECJI/080/MV 80W MBFU
ECJI/125/MV 125W MBFU
ECJI/050/GLS 150W GLS
26Specification options and accessories are available, contact sales for further information.
Product design and specifications are subject to change without notice, please check the Chalmit® website for latest specifications.
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz. Contact sales for alternative voltage
options - Tel +44 (0)141 882 5555
• IP66/IP67 • Marine grade aluminium LM6 alloy body with toughened glass window• Highly resistant to corrosion and mechanical damage
• IP66 • Painted aluminium body with fluted glass globe • Easy access to control gear • Corrosion resistant• Excellent light distribution • Optional reflectors available; sealed spun, dome & angled
• IP66/IP67 • Painted aluminium body with fluted glass globe • Compact size and low weight • Easy access to control gear• Corrosion resistant • Excellent light distribution • Optional reflectors available; dome & angled
27
As part of the Hubbell Harsh & Hazardous group Chalmit, Hawke, Killark & Gai-Tronics combines dedicated, market leadingbrands within the Hubbell portfolio to provide a complete package for companies operating in some of the toughest
environments on the planet.
We are committed to providing quality products and services that will meet and exceed your expectations.Our principal activity is the design and manufacture of rugged and hard wearing products, These include lighting,
control gear and electrical connection products; all designed to operate primarily in extreme outdoor,hazardous and corrosive areas.
As a group, we encourage engineering excellence. We are driven to utilise leading edge technologies and manufacturingtechniques to help you fulfill your specific requirements. Our product ranges are designed and certified to many
of the leading global standards.
ChalmitPO BOX 5575
GlasgowG52 9AP
U.K.T: +44 (0)141 882 5555F: +44 (0)141 883 3704
E: [email protected]: www.chalmit.com
Hawke International U.K.Oxford Street WestAshton Under LyneLancashire OL7 0NA
U.K.T: +44 (0)161 830 6695F: +44 (0)161 830 6648
E: [email protected]: www.ehawke.com
Killark3940 Dr Martin Luther King Drive
St Louis MO63113USA
T: +1 314 531 0460F: +1 314 531 7164
E: [email protected]: www.hubbell-killark.com
GAI-TronicsBrunel Drive, Stretton Park
Burton Upon Trent, Staffordshire DE13 0BZU.K.
T: +44 (0)1283 500 500F: +44 (0)1283 500 400E: [email protected]
W: www.gai-tronics.org.uk
For further information, please contact us here
INDUSTRIAL
Starline Street Lantern
Part No Description
• Pot optic reflector system fully sealed to IP66 • Powder coated LM6 aluminium enclosure with toughened flat glass• Post top and side entry options available • Corrosion resistant • Excellent light distribution
STAI/100/MS 100W HPS/Metal Halide
STAI/150/MS 150W HPS/Metal Halide
STAI/250/MS 250W HPS/Metal Halide
STAI/400/MS 400W HPS/Metal Halide
/MT Multi tapped ballast fitted as standard (lamp dependant)– wired to 240V 50Hz Contact sales for alternative
voltage options - Tel +44 (0)141 882 5555
Contact Details
www.chalmit.com
Specialists inHazardous Area Equipment
Quick Reference Guide
United Kingdom
Chalmit, PO Box 5575, Glasgow G52 9AP, U.K.Tel: +44 (0) 141 882 5555 Fax: +44 (0) 141 883 3704
E-mail: [email protected]
Europe
Dieselweg 4 3553 GT Utrecht, The NetherlandsTel: +31 (0) 30 2467 132 Fax: +31 (0) 30 2467 133
E-mail: [email protected]
Middle East
Bldg. No. 5EA, Office No. G03Dubai Airport Free Zone (DAFZ), PO Box 23529, Dubai UAE
Tel: +974 6612 0728E-mail: [email protected]
Asia Pacific
130 Joo Seng Road #03-02 Olivine BuildingSingapore 368357
Tel: +65 6282 2242 Fax: +65 6284 4244Email: [email protected]
China
Unit 802, Zendai Cube Edifice, No.58 Changliu RoadShanghai 200135, P.R.China
Tel: +86 (21) 3392 6550 Fax: +86 (21) 3392 6551Email: [email protected]
Chalmit®, A leading supplier of Hazardous Area, Industrial and Marine lighting products.
Korea
512 Hyosung Intellian 681-3, Deungchon DongKangseo-Ku, Seoul, 157-030, Korea
Tel: +82 2 2063 3719 Fax: +82 2 2603 7386Mob: +82 10 9977 6349 E-mail: [email protected]
Manufacturing, Sales Support and Technical Service
A Division of Hubbell Inc.