specification for tool room machineries & metrology equipments
TRANSCRIPT
Technical Specifications of Tool Room Machines for High Learning Centres
1
Name of the Machine : Lathe Qty. : 04 Nos.
Sl. No. Specification Unit
Range/Value
1 Height of the Center mm 100 - 125
2 Centre distance mm 350 – 500
3 Maximum Swing over bed mm 200 – 250
4 Swing over cross slide mm 150 - 250
5 Cross slide travel mm 100 – 125
6 Type of Bed Straight
7 Headstock All geared
8 Spindle Speed rpm 150 – 3000
9 Metric Threads mm 0.5 – 7
10 Inch Thread TPI 56 - 4
11 Lead screw STD.
12 Tool dimension mm To be specified by
the bidder
13 Tail stock shank diameter mm 40 – 50
14 Tail stock shank travel mm 100 – 125
15 Tail stock taper STD.
Accessories: � Three Jaw chuck (ø 150 mm) with Adapter
� Four Jaw chuck (ø 200 mm) with Adapter � Quick change Tool Post � Coolant System with splash guard � Machine Lamp � Live & Dead Center
� Foot Brake � Oil gun � Chuck guard � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to
specify)
Technical Specifications of Tool Room Machines for High Learning Centers
2
Name of the Machine : Vertical Milling Machine (Ram Type) Qty. : 04 Nos.
Sl.
No. Specification Unit Range/Value
1. Work Table Area mm (1000 – 1100) x (200 – 250)
2. Longitudinal mm 700 – 800
3. Cross (Transverse) mm 275 – 325
4. Vertical mm 350 – 450
5. Ram Travel mm 300 – 325
6. Quill Travel mm 100 – 125
7. Spindle Speed rpm 45 – 3500 (infinitely variable)
8. Spindle Taper ISO-40
9. Longitudinal Feed mm / min To be specified by the bidder
10. Traverse Feed mm / min To be specified by the bidder
11. Vertical Feed mm / min To be specified by the bidder
12. Swivel of Milling Head to either
side
degree 45
13. Arm Swivel degree 360
Accessories: � Precision Machine Vice 6” � Clamping Kit � Collet chuck with set of Collets (up to20
mm) � Coolant System with splash guard � Machine Lamp
� Oil gun � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to
specify)
Technical Specifications of Tool Room Machines for High Learning Centers
3
Name of the Machine : Vertical Milling Machine (Ram Type) with DRO Qty. : 04 Nos.
Sl.
No. Specification Unit Range/Value
1. Work Table Area Mm (1000 – 1100) x (200 – 250)
2. Longitudinal mm 700 – 800
3. Cross (Transverse) mm 275 – 325
4. Vertical mm 350 – 450
5. Ram Travel mm 300 – 325
6. Quill Travel mm 100 – 125
7. Spindle Speed rpm 45 – 3500 (infinitely variable)
8. Spindle Taper ISO-40
9. Longitudinal Feed mm / min To be specified by the bidder
10. Traverse Feed mm / min To be specified by the bidder
11. Vertical Feed mm / min To be specified by the bidder
12. Swivel of Milling Head to either
side
degree 45
13. Arm Swivel degree 360
Accessories:
� Precision Machine Vice 6” � Collet chuck with set of Collets (up
to 20 mm) � 3 axis Digital Read Out Systems
with a resolution of 0.005 mm � Coolant System with splash guard � Machine Lamp
� Oil gun � Clamping Kit � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder
to specify)
Technical Specifications of Tool Room Machines for High Learning Centers
4
Name of the Machine : Vertical Milling Machine (Column / Knee Type) Qty. : 04 Nos.
Sl.
No. Specification Unit Range/Value
1. Work Table Area mm 1350 x 350
2. Longitudinal mm (800-830)Automatic/Manual
3. Cross (Transverse) mm (230-260) Automatic /Manual
4. Vertical mm 400-425mm (Auto/ manual)
5. Quill Travel mm 60 – 80
6. Spindle Speed rpm Up to 2500
7. Spindle Taper ISO-40
8. Longitudinal Feed mm / min Bidder to specify
9. Traverse Feed mm / min Bidder to specify
10. Vertical Feed mm / min Bidder to specify
11. Rapid Traverse
Longitudinal
mm/min
Bidder to specify
12. Traverse mm/min Bidder to specify
13. Vertical mm/min Bidder to specify
Accessories: � Reduction Milling Sockets MT1, MT2,
MT3 & MT4 � Precision Machine Vice 6” � Clamping Kit � Collet chuck with set of Collets (up to20
mm) � Coolant System with splash guard
� Machine Lamp � Oil gun � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to
specify)
Technical Specifications of Tool Room Machines for High Learning Centers
5
Name of the Machine : Horizontal Milling Machine Qty. : 04 Nos.
Sl. No. Specification Unit Range/Value
1. Work surface of the Table mm (1000 – 1200) x (200 – 250)
2. Longitudinal travel mm 500 – 600
3. Cross (Transverse) Travel mm 250 – 275
4. Vertical Travel mm 400 – 425
5. Spindle Speed rpm Up to 2000
6. No. of Progression Bidder to specify
7 Spindle Taper ISO 40
8. Height of Spindle center to Table mm 0 – 350
9. Longitudinal Feed (Auto) mm / min 20 – 250
10. Traverse Feed (Auto) mm / min 20 – 250
11. Rapid Traverse Longitudinal &
Traverse
mm/min Bidder to specify
Accessories: � Reduction Milling Sockets MT1, MT2,
MT3 & MT4 � Precision Machine Vice 8” � Clamping Kit � Milling Arbors � Cutter Sleeves � Draw Bar � Coolant System with splash guard � Machine Lamp
� Oil gun � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder
to specify) � 3 Axes DRO with 0.005 mm
resolution � Rotary Table 350 mm � Indexing Head
Technical Specifications of Tool Room Machines for High Learning Centers
6
Name of the Machine : Universal Milling Machine Qty. : 04 Nos.
Sl. No. Specification Unit Range/Value
1. Work surface of the Table mm (1000 – 1200) x (200 – 250)
2. Longitudinal travel mm 500 – 600
3. Cross (Transverse) Travel mm 250 – 275
4. Vertical Travel mm 400 – 425
5. Spindle Speed rpm Up to 2000
6. No. of Progression Bidder to specify
7 Spindle Taper ISO 40
8. Height of Spindle center to Table mm 0 – 350
9. Longitudinal Feed (Auto) mm / min 20 – 250
10. Traverse Feed (Auto) mm / min 20 – 250
11. Rapid Traverse Longitudinal &
Traverse
mm/min Bidder to specify
12 Swivel of the Table on either side degree 45
Accessories: � Reduction Milling Sockets MT1, MT2,
MT3 & MT4 � Precision Machine Vice 8” � Clamping Kit � Milling Arbors � Cutter Sleeves � Draw Bar � Coolant System with splash guard
� Machine Lamp � Oil gun � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to
specify) � 3 Axes DRO with 0.005 mm resolution
Technical Specifications of Tool Room Machines for High Learning Centers
7
Name of the Machine : Shaping Machine Qty. : 04 Nos.
Sl. No. Specification
Unit
Range/Value
1. Table size mm 450 x 350
2. Length of Stroke mm 400 – 450
3. Vertical Travel of the Table mm 300 – 325
4. Distance between Table to Ram mm 50 – 70 (min.)
325 – 375 (max.)
5. Ram Cycle / min 15 – 100
Accessories: � Machine Vice 8” � Angle Plate 8” & 12” ( 01 each) � C – Clamp 4”, 6” & 8” (01 each) � One set of manuals
� One set of Service Tools, Keys � Standard spares for 2 years (bidder to
specify)
Technical Specifications of Tool Room Machines for High Learning Centers
8
Name of the Machine : Radial Drilling Machine Qty. : 04 Nos.
Sl.
No. Specification Unit Range/Value
1. Max. Drilling Capacity mm 25 – 32
2. Drilling Radius mm 275 – 750
3. Distance between Spindle nose
and base of the machine
mm 250 – 700
4. Spindle Speed rpm 100 – 1750
5. Spindle Taper MT – 3 / MT - 4
6. Spindle Traverse mm 140 – 150
7. Feed mm / rev. Bidder to specify
Accessories: � Box Shape Worktable to suit the machine
(250 x 250 x 250 mm) � Machine Vise 8” � Taper / Reduction sleeves � Quick Change Drill Chuck � Coolant Equipment
� Machine Lamp � Drifts � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to
specify)
Technical Specifications of Tool Room Machines for High Learning Centers
9
Name of the Machine : Bench Drilling Machine Qty. : 04 Nos.
Sl.
No. Specification Unit Range/Value
1. Max. Drilling Capacity mm 12 - 15
2. Table working surface mm 200 – 250
3. Distance between Spindle centre to
pillar front
mm 140 – 150
4. Distance between Spindle to table mm 300 – 350
5. Distance between Spindle & Base mm 500 – 525
6. Spindle Traverse mm 75 – 100
7. Feed mm / rev. Bidder to specify
Accessories: � Taper / Reduction sleeves � Drill Chuck � Drifts � One set of manuals
� One set of Service Tools, Keys � Standard spares for 2 years (bidder to
specify)
Technical Specifications of Tool Room Machines for High Learning Centers
10
Name of the Machine : Surface Grinding Machine (Hydraulic) Qty. : 04 Nos.
Sl.
No. Specification Unit Range/Value
1. Working Area mm (300 – 350) x (150 – 175)
2. Height of the Table to Grinding
Wheel
mm 175 – 225
3. Speed of the Grinding Wheel rpm Bidder to specify
4. Longitudinal feed (Hydraulic) -- Bidder to specify range / rate
5. Cross feed of the table / Auto Feed
with micrometer graduation
-- Bidder to specify range / rate
6. Vertical feed (wheel head) -
Hydraulic
--- Bidder to specify range / rate
7. Spindle Orientation -- Vertically adjustable
Horizontal spindle
Accessories: � Machine Lamp � Magnetic Chuck � Diamond Tool with holder � Coolant equipment with splash guard � Wheel Balancing stand � Wheel guard � One set of manuals
� One set of Service Tools, Keys � Standard spares for 2 years (bidder to
specify) � Complete with all required electrical
motors � Grinding wheel (Al2O3 ) – 02 Nos.
Technical Specifications of Tool Room Machines for High Learning Centers
11
Name of the Machine : Cylindrical Grinding Machine Qty. : 04 Nos.
Sl. No.
Specification Unit
Range/Value
1. Type mm Hydraulic
2. Max. Grinding Diameter mm 125 – 150
3. Max. Grinding length mm 200 - 250
4. Max. Distance between centers mm 200 - 250
5. Table travel (Automatic) mm Bidder to specify
6. Table Swivel degree ± (8 - 10)
7. Wheel head swivel degree ± 45
8. Rapid wheel movement mm Bidder to specify
9. Automatic in feed mm Bidder to specify
10. Plunge feed mm 0 - 0.05
11. Plunge travel mm 0.3 – 0.5
12. Grinding Wheel diameter mm Bidder to specify
13. Wheel width mm Bidder to specify
14. Wheel speed rpm Bidder to specify
15. Work head rpm 80 – 800
16. No. of speed No. Bidder to specify
17. Work head Swivel degree ±( 30 - 45)
Accessories: � Three Jaw chuck (ø 150mm) � Dogs & Carriers (5 – 30 mm) � Machine Lamp � Diamond Tool with holder � Coolant equipment with splash guard � Wheel Balancing stand
� Wheel guard � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to
specify) � Grinding wheel (Al2O3 ) – 02 Nos.
Technical Specifications of Tool Room Machines for High Learning Centers
12
Name of the Machine : Tool & Cutter Grinding Machine Qty. : 04 Nos.
Sl. No.
Specification Unit
Range/Value
1. Table size mm (450 – 500) x (75 – 100)
2. Table travel mm 350 – 425
3. Cross travel of the table mm 150 – 200
4. Wheel head swivel degree 360
5. Swivel of the Table degree 60
6. Swivel of Work head – Horizontal degree 60
7. Swivel of Work head – Vertical degree 360
8. Grinding spindle speed rpm Bidder to specify
Accessories: � End mill , reamer grinding attachment � Drill, Taps grinding attachment
(Straight / taper shank) � Lathe tools grinding attachment � Radius tools / cutters grinding
attachment � Wheel head tooth rest with extension
bar � Grinding wheel guards
� Grinding wheel flanges (different sizes)
� Machine Lamp � Diamond Tool with holder � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to
specify) � Different Grinding wheel (Cup, saucer,
taper, straight etc.)
Technical Specifications of Tool Room Machines for High Learning Centers
13
Name of the Machine : Pedestal Grinder (Double ended) Qty. : 04 Nos.
Sl. No.
Specification Unit
Range/Value
1. Wheel Size mm 250 x 25 x 31.75 /
300 x 40 x 50.8
2. Wheel Center Distance mm 600 – 650
3. Distance between base and wheel spindle
mm 800 – 900
Accessories: � Wheel guard � Tool Rest � One set of Service Tools
Technical Specifications of Tool Room Machines for High Learning Centers
14
Name of the Machine : Power Hacksaw Machine (Hydraulic) Qty. : 04 Nos.
Sl. No.
Specification Unit
Range/Value
1. Max. size of material to be cut mm 200 – 300
2. Stroke length mm 100 – 160
3. No. of Speed strokes --- Bidder to specify
4. Power Hacksaw blade Bidder to specify
Accessories: � Work holding device � Coolant system / equipment � Work rest � Adjustable material stop
� One set of manual � One set of service tools
Technical Specifications of Tool Room Machines for High Learning Centers
15
Name of the Machine : Hydraulic Press (C - Type) Qty. : 04 Nos.
Sl. No.
Specification Unit
Range/Value
1. Capacity Tonnage 05
2. Stroke Length mm 200 – 250
3. Daylight mm 250 – 300
4. Shut Height mm 50 – 75
5. Platen size mm 300 – 350
6. Approach speed mm / sec Bidder to specify
7. Pressing speed mm / sec. Bidder to specify
8. Return speed mm / sec. Bidder to specify
9. No. of cylinders No. Bidder to specify
Accessories: � Standard accessories � One set of manual � One set of service tools
Technical Specifications of Tool Room Machines for High Learning Centers
16
Name of the Machine : 2 Dimensional Pantograph Engraving Machine Qty. : 04 Nos.
Sl. No.
Specification Unit
Range/Value
1. Copying Ratio --- 1:1 to 1:50
2. Work Table
a. Table Size mm (400 – 450) x (200 – 250)
b. Longitudinal Movement Mm 200 – 250
c. Traverse Movement mm 150 – 160
d. Vertical Movement mm 200 – 250
3. Master Table Size mm (400 – 450) x (200 – 250)
4. Spindle Speed / range rpm Bidder to specify
5. Cutter Diameter (Max) mm Up to 12
6. Rapid Movement, Micrometer feed, Micrometer graduation
-- Bidder to specify
Accessories: � Clamping Kit � Letter templates (Positive & Negative)
with template holder � Standard accessories like stylus
holder, stylus etc.
� Collets of different sizes (3, 4, 5, 6, 8, 10 & 12 mm)
� One set of manual � One set of service tools � Standard spares for 2 years
Note: The machine should be supplied along with Single Lip Cutter Grinder with standard accessories to suit the quoted pantograph engraving machine.
Technical Specifications of Tool Room Machines for High Learning Centers
17
Name of the Machine : Small Mill (Lab / Table Top Model) Qty. : 04 Nos.
Sl.
No. Specification Unit Range/Value
1. Work table effective area mm (500 – 550) x (150 – 175)
2. Drilling capacity mm 20 – 25
3. End Mill capacity mm 20 – 25
4. Face Mill capacity mm 50 – 60
5. Spindle Stroke mm 75 – 100
6. Distance between Spindle &
Table
mm 300 – 350
7. Spindle Speed rpm 80 - 2000
8. Spindle Taper MT 3 / MT 4
9. Longitudinal travel mm 275 – 325
10. Cross Travel Mm 150 – 175
11. Auto feed Longitudinal / Cross
travel
mm/min Bidder to specify
Accessories: � Reduction Milling Sockets MT1, MT2,
MT3 & MT4 � Precision Machine Vice 4” � Clamping Kit � Collet chuck with set of Collets (up to
20 mm)
� Machine Lamp � Oil gun � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder
to specify)
Technical Specifications of Tool Room Machines for High Learning Centers
18
Name of the Machine : CNC Lathe (Trainer / Lab Model) Qty. : 04 Nos.
Sl.
No. Specification
Unit
Range/Value
1. Optimum Cutting Diameter mm 125 – 150
2. Swing over Table / Bed mm 125 – 150
3. Swing over Cross Slide mm 250 – 280
4. X axis Travel mm 275 – 325
5. Z axis Travel mm 175 – 200
6. Spindle speed rpm 50 – 5000
7. Axis Positioning mm ± 0.005 or more
8. Axis repeatability mm ± 0.002 or more
9. Feed Rate m / min 10 – 15
10. Rapid Travel in X / Z axis m / min 15 – 20
11. Type of Control --- Fanuc oi / Siemens / Haas / Equivalent
Accessories:
� 3 Jaw ø 100 mm Manual scroll chuck � Coolant pump / system � 6 / 8 position Tool Holder (Gang Tooling) � Hard disk drive & Ethernet interface with
USB support
� Machine Lamp � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to
specify)
Technical Specifications of Tool Room Machines for High Learning Centers
19
Name of the Machine : CNC Milling Machine (Trainer Model) Qty. : 04 Nos.
Sl.
No. Specification Unit Range/Value
1. Work Table Size mm (450 - 500) x (200 – 250)
2. X Axis Travel mm 450 – 500
3. Y Axis Travel mm 275 – 325
4. Z Axis Travel mm 325 – 350
5. Distance between Spindle & Table mm Min: 75 – 100
Max.: 400 – 450
6. Max. Feed Rate (X, Y, Z) mm / min 5000
7. Rapid Traverse (X, Y, Z) m / min 8 – 10
8. Spindle Speed rpm 7500 – 8000
9. Spindle Taper ISO 30 / ISO 40
10. CNC Control Fanuc/ Siemens / Mitsubishi /
Heidenhein
11. Accuracy mm ± 0.005 or more
12. Repeatability mm ± 0.01or more
13. Resolution mm ± 0.005 or more
Accessories: � Precision Machine Vice 6” � Clamping Kit � Collet chuck with set of Collets (up
to20 mm) � Coolant System with splash guard � Machine Lamp
� Oil gun � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder
to specify)
Technical Specifications of Tool Room Machines for High Learning Centers
20
Name of the Machine : CNC EDM Qty. : 04 Nos.
Sl. No.
Specification Unit
Range/Value
1. Work Tank Size mm (750 – 850) x (500 – 550) x (250 – 350)
2. Axis Travel a. X Axis mm 275 - 325 b. Y Axis mm 175 – 225 c. Z Axis (Ram Travel) mm 250 – 300 d. Axis positioning resolution mm 0.001 (min.) 3. Best Surface finish micron 0.2 – 0.5 (Ra value) 4. Dielectric System a. Volume Bidder to specify
b. Filter method -- Paper Filter (size to specify) c. Type of Flushing To be specified 5. Power supply unit / Spark generator a. Max. Machining Current Amp 25 – 30 b. Max. Machining Speed mm3 / min Bidder to specify c. Electrode wear rate % Bidder to specify 6. CNC Controller a. Closed loop linear scale feedback on X. Y & Z axes b. Dialogue programming for selecting optimum machining
conditions / parameters
c. Canned orbit cycles for commonly used machining modes d. Automatic Edge / Center finding & Z ref. location e. 3 Axis linear, 2 Axis arc, 3 Axis spiral and 4 Axis contouring
offset movement
f. 14” CRT monitor with graphics, ASCII / Keyboard / Isolated RS 232 Serial interface, USB port & Ethernet
g. Sub programming i. Multiple Z axis automatic machining depth J. Set of working parameters & database k. Full function remote control for all the axes
Accessories: � Work head � Tool Box / kit � Filter set � Work / Machine Lamp � Clamping kit � 3 R Clamping Tool set along with set of
collets � C - Axis
� Precision machine vise 4” � Flush aids � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to
specify)
Additional Equipments required:
1. Servo Stabilizer with Isolation Transformer to suite the machine capacity
2. Chiller
Technical Specifications of Tool Room Machines for High Learning Centers
21
Name of the Machine : CNC Wirecut EDM Qty. : 04 Nos.
Sl. No.
Specification Unit
Range/Value
1. Axis Travel a. X Axis mm 225 – 275
b. Y Axis mm 325 – 400 c. U & V Travel mm 50 – 60 each
2. Max. work piece height mm 175 – 225
3. Maximum Taper angle 0/ mm 7 – 10 / 50 4. Surface finish micron 1 – 1.2 (Ra value)
5. Maximum Cutting speed mm2 / minute 70 – 75 6. Resolution mm 0.001
7. Positioning accuracy mm ± 0.005
8. Control Axes ---
X, Y, U, V & Z Simultaneous / Independent
9. Interpolation --- Linear / Circular
10. Least input increment mm 0.001
11. Data input / output ---
ASCII / Keyboard / Isolated RS 232 Serial interface, USB port & Ethernet
12. Display -- 15” colour display
13. Control System ---
32 bit, 1 – CPU, closed loop software servo system
14. Machining Feed control -- Servo / Const. feed 15. Scaling --- Bidder to specify
16. Technology --- Bidder to specify
17. Wire diameter mm 0.15 – 0.3 18. Wire alignment --- Bidder to specify
Accessories: � Standard Accessories like wire guide,
paper filter, flushing nozzle, wire alignment jig,
� Tool Box / kit � Clamping kit
� One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to
specify)
Additional Equipments required:
1. Servo Stabilizer with Isolation Transformer to suite the machine capacity
2. Chiller
3. Air Compressor
Technical Specifications of Tool Room Machines for High Learning Centers
22
Name of the Machine : CNC Lathe / Milling Programming Module Qty. : 4 Nos.
Haas Control SimulatorHaas Control SimulatorHaas Control SimulatorHaas Control Simulator
Control Simulator Module (110 volt); dual software (mill and lathe), LCD display, USB port
Technical Specifications of Tool Room Machines for High Learning Centers
23
Name of the Equipment : Metrological instruments Qty. : 04 sets
Sl. Name of the Instrument Range / Specification Resolution Qty. 1. Digimatic Vernier 0 – 300 mm 0.001 mm 02 2. Vernier Caliper 0 – 200 mm 0.02 mm 05 3. Vernier Caliper 0 – 300 mm 0.02 mm 02 4. Vernier Depth Gauge 0 – 300 mm 0.02 mm 03 5. Digimatic Height Gauge 0 – 1000 mm 0.01 mm 01 6. Vernier Height Gauge 0 – 1000 mm 0.02 mm 01 7. Outside Micrometer set 0 – 100 mm (0 -25 , 25 -50, 50 –
75, 75 – 100, 0.01 mm 01
set 8. Depth Micrometer 0 – 300 mm 0.001 mm 01 9. Inside Micrometer 5 – 100 mm 0.01 mm 01
set 10. Dial indicator 0 – 5 mm 0.01 mm 02 11. Dial indicator 0 – 10 mm 0.01 mm 02 12. Dial indicator 0 – 1 mm 0.001 mm 02 13. Bore Gage set with standard Dial
Indicator 18 – 150 mm 0.01 mm 01
set 14. Dial Test Indicator 0 – 1 mm 0.01 mm 02 15. Dial Test Indicator 0 – 1.6 mm 0.01 mm 02 16. Gauge Block Set 122 block set Grade K 01 17. Gauge block accessories 22 pcs/ set (upto 100 mm) - 01 18. Sine Bar 200 mm -- 02 19. Granite Surface Plate 1500 x 1000 x 200 mm - 01 20. Precision Squares 200 x 130 mm 02 21. Precision Squares 300 x 200 02 22. Combination Square set 300 mm 03 23. Universal Bevel Protractor 150 mm 5” 03
24. Universal Bevel Protractor 300 mm 5” 01
25. Precision Level 200 x 44 x 200 mm 0.02 mm / m 01
26. Thickness gage 0.05 – 1 mm 0.01 / 0.05 mm 01
27. Radius gage 0.4 – 6mm 0.25 / 0.5 mm 01
28. Radius gage 1 – 7 mm 0.25 / 0.5mm 01
29. Radius gage 7.5 – 15 mm 0.5 mm 01
30. Radius gage 15.5 – 25 mm 0.5 / 1.0 mm 01
Technical Specifications of Tool Room Machines for High Learning Centers
24
Name of the Equipment : Optical Profile Projector Qty. : 04 Nos.
Sl.
No. Specification Unit Range/Value
1. X, Y Axis measuring Travel mm 200 x 100
2. Precision measuring stage mm 125 X 375 mm
3. Resolution mm 0.001
4. Focus mm 100
5. Three lens turret mount with 10x lens
6 Magnification -- 10 X, 20 X, 50 X
7 Diameter of Screen mm 350 – 450
8 Digital angle display and the screen with 0.01o resolution
Accessories
� X,Y and angle readouts
� Connectivity to PC (Software)
� Duplex fiber optic surface
illumination
� Green Filter condenser lens
� Oblique Reflection mirror
� Holder with clamp
� V-Black with clamp for maximum
work piece diameter 25mm
� Geometrical function measuring
software, scaleboards & DXF
format CAD/CAM interface
� One set of manuals
� Set of service tools
� Standard set of spares
Technical Specifications of Tool Room Machines for High Learning Centers
25
Name of the Equipment : Tool Maker’s Microscope Qty. : 04 Nos.
Sl.
No. Specification Unit Range/Value
1. X, Y Axis measuring Travel mm (50 – 60) x (50 – 60)
Table Top Size mm 150 x 150
Effective Table Area mm 100 x 100
Observation image type -- Erect image
Angle Reading Range degree 360
Eyepiece --- 15 X
Objective --- 2 X
Measuring Method -- With micrometer head
6 Total magnification -- 30 X
Colour & Surface illumination --- With green filter,
adjustable light intensity
Accessories
� 10 X, 20 X eyepiece
� 5 X , 10 X Objective
� Digimatic micrometer head
� Dial indicator attachment for Z axis
� Work piece clips
� Rotary table
� V Block with clamp
� Rectile and other accessories for
Metric / Withworth threads
� One set of manual
� Set of service tools
� Standard set of spares