spf-200 series...1,060 / 41.8” 645 25.4” 175 6.9” hof-400 blower box 842 33.2” spf-200a:...
TRANSCRIPT
Bookletmaker SPF-200 series
SPF-200 seriesBookletmaker SPF-200A / 200L + FC-200A / 200L
In-line booklet-making system
2
Advanced AutomationAll necessary settings for a wide variety of booklet formats, ranging from CD to A4 landscape (A4 landscape is available only with SPF-200L) can be performed automatically through the touchscreen display. Even the fold roller gap adjustment is automated. The quick fully-
production and leads to a reduction of test sheets.
Color Touchscreen for Easy OperationThe 10.4 inch large color touchscreen features an intuitive, icon-based display for easy operation and quick troubleshooting.
Supporting both Digital and Offset PrintThe SPF-200 series booklet-making system provides
connected for conventional offset print production and the
output.
Cost SavingsThe SPF-200 series booklet-making system processes the pre-cut 4-page sheets instead of folded signatures to eliminate the folding process.
The SPF-200 series bookletmaking system features high productivity, fully automated changeover and user-friendly operation.
High Speed Production
Non-stop OperationA reject function allows non-stop operation. Errored booklets are rejected into the built-in reject tray so only good booklets are delivered to the conveyor for non-stop operation and accurate bookletmaking.
Quality ControlThe wire feeding sensor and jog sensor are equipped to
detector and thickness detector are available for even higher quality control.
A Wide Range of Optional UnitsA wide range of optional units such as a hole punch unit, paper insertion knife unit and preset kicker are available to meet varying customer needs.
upstream devices.
Bypass Stacker : ST-40Stitcher & Folder : SPF-200A
Hole Punch Unit : HP-200A Sub Accumulator : SA-40Short Conveyor : SC-200
Fore-edge Trimmer : FC-200A
Paper Jogger : PJ-77R
3
VAC-1000(Tower a)IFU-200SPF-200L
FC-200LLC-200
VAC-1000(Tower m)
A4 Landscape booklet production
The SPF-200L booklet making system
including A4 landscape. This expanded capability provides a
demanding market needs.
LG-1000: Landscape Guide
LG-1000 enables sheet
be loaded for A4 landscape
booklet production.
Cover Feeder : CF-400
Stitcher & Folder : SPF-200L
Accumulator : AC-400
Fore-edge Trimmer : FC-200L
Fore-edge Trimmer : FC-200L
Long Conveyor : LC-200
Short Conveyor : SC-200
Infeeder Unit : IFU-200
Bleed Crease Module : CR-400
Stitcher & Folder : SPF-200A
Bookletmaker SPF-200 series
4
1 Color Touchscreen
10.4 inch color touchscreen is intuitive and icon-based for user-friendly operation.
200 job settings can be entered and stored. The operator can name stored jobs alpha-numerically, for quick easy search and retrieval.
The collating system and the fore-edge trimming can be controlled from the control panel.
2 Hand Marrying: IFU-200 (Option)
The IFU-200 allows hand feeding of previously collated sets,
Hand marrying mode 1: Insert one booklet. Hand marrying mode 2: Merge a hand fed set on top of a set from the collator. Hand marrying mode 3: Merge a set from the collator on top of a hand fed set.
3 Jogging
Jog count and stroke can be set to handle a wide variety of sheets.
1
3
5
6
7
8
Long Conveyor : LC-200Fore-edge Trimmer : FC-200L
Stitcher & Folder : SPF-200L
5
Short Conveyor: SC-200
Finished booklets are neatly
Long Conveyor: LC-200
longer than the SC-200 Short Conveyor. A large number of booklets can be neatly delivered.
4 Stitching
The wire feeding sensor alerts when the wire spool is nearly empty or jamming, and stops the system to eliminate non-stitched booklets.
Up to 48 sheets of normal
can be stitched or up to 24
and folded.
The stitching position and distance are automatically set up for
5 Folding
Folding roller and press roller gaps are automatically adjusted according to the booklet thickness.
The jog sensor detects jog faults and rejects any errored booklets to the reject tray.
guides to provide accurate folds.
8 Faulty Set Rejection
Errored sets are rejected to the reject tray so that only correct booklets are delivered to the conveyor.
7 Conveyor
Either the SC-200 Short Conveyor or the LC-200 Long Conveyor is available.
Conveyor belt running time and batch counter can be controlled from the touchscreen.
Booklets on the conveyor can be easily delivered by pressing the eject button.
6 Fore-edge Trimming
The servo-motor is employed for knife driving to provide high speed and sharp fore-edge trimming.
The top-bottom transport belt insures smooth booklet transportation and delivery.
that no chips are left in the trimming area.
Durable casting structure for quality trimming.
24
Infeeder Unit : IFU-200
Bookletmaker SPF-200 series
6
Options
HOF-400High Speed Off-line Feeder
This high speed feeding is capable of handling the output of multiple printers.
easy and intuitive operation.
The HOF-400 is compatible with a wide variety of system
accumulating, bleed trimming and center creasing depending on your needs.
The HOF-400 is equipped with a high quality feed detection system for reliable processing. If a mis-feeding occurs in the HOF-400, the system stops before stitching.
Ultrasonic Sensor: Miss-feed, double-feed or jam detectionMark sensor: Page order detection (top and last sheet)
HP-200AHole Punch Unit
Bookletmaker : SPF-200A
Bookletmaker : SPF-200A
Short Conveyor : SC-200
Fore-edge Trimmer : FC-200A
Fore-edge Trimmer : FC-200A
bookletmaking in-line with the SPF-200A.
Necessary settings and operation can be performed
touchscreen on the SPF-200A. Changeover for 2 holes and 4 holes is easy for user-friendly operation.
The top-bottom transport belt insures stable booklet transportation. Blower air at fore-edge jog section is equipped as a standard for more accurate and stable production.
Hole Punch Unit : HP-200A
High Speed Off-line Feeder HOF-400
Cover Feeder CF-400
Accumulator AC-400
High speed hole punching can be performedwithout effect on *the production speed of the SPF-200A. Hole punch, press and through modes can be se*Production speed changes depending on the binding mode, booklet thickness and sheet condition.
7
Easy access to the knife section for setup and maintenance. Operator safety is ensured with the interlocked cover.
transported and jogged with a uniquely designed system that ensures accurate trim quality.
The whole transport section can be opened for easy booklet access and handling.
Trim from face and top-bottom can be gathered at the same place for space
trim removal.
TBC-200LTop and Bottom Trimmer
ST-40Bypass Stacker
Bookletmaker : SPF-200LTop and Bottom Trimmer : TBC-200L
Fore-edge Trimmer : FC-200L
bookletmaking system. A stand alone model is also available to
landscape booklet production.
Connected between the collating and bookletmaking systems, the ST-40 serves as a high-capacity offset or straight stacking device.
Errored sets are delivered to the built-in reject tray for non-stop operation.
A continuously cycling tail jog keeps all sheets well positioned for superior stack quality.
Set-up and operation can be controlled from the SPF-200 series touchscreen. An individual touch screen is equipped on the stand alone model.
Bypass Stacker : ST-40
Bookletmaker SPF-200 series
8
SPF-200A: 1,625 / 64.0”SPF-200L: 1,856 / 73.1” 842 / 33.2”1,295 / 51.0”
SPF-200A / FC-200A: 6,712 / 264.2”SPF-200L / FC-200L: 7,013 / 276.1”
SPF-200A / FC-200A: 7,252 / 285.1”SPF-200L / FC-200L: 7,553 / 297.3”
664 / 26.2”
34213.5”
92 / 3.7”1,216 / 47.8”50019.7
676 / 26.6”
84533.2” 650
25.6” 99239.1”
Blower Box
VAC-1000(Tower a)
SPF-200A/LHP-200ALC-200 SC-200 ST-40 ST-CV
Max. depth1,120 / 44.1”
1,017 / 40.0”
TBC-200L
FC-200A: 665 / 26.2”FC-200L: 735 / 29.0”
FC-200A/L
SPF-200A: 1,625 / 64.0”SPF-200L: 1,856 / 73.1”
FC-200A: 665 / 26.2”FC-200L: 735 / 29.0”
842 / 33.2”470
18.6”
SPF-200A / FC-200A: 5,387 / 212.1”SPF-200L / FC-200L: 5,688 / 223.9”
SPF-200A / FC-200A: 5,927 / 233.3”SPF-200L / FC-200L: 6,228 / 245.2”
664 / 26.2”
34213.5”
92 / 3.7”
65025.6” 992
39.1”
Blower Box
VAC-1000(Tower a)
IFU-200SPF-200A/LFC-200A/LLC-200 SC-200 TBC-200L
Max. depth1,120 / 44.1”
1,216 / 47.8”
676 / 26.6”
84533.2”
1,017 / 40.0”
Bookletmaker Collator
CCR-DXCriss-Cross Receiving Tray
PJ-77RPaper Jogger
HP-200AHole Punch Unit
HP-200AHole Punch Unit CCR
Criss-Cross Receiving Tray
IFU-200Infeeder Unit
VAC-1000VAC-600HVAC-100VAC-60H
CollatorBC-20
Bypass Conveyor
SA-40Sub Accumulator
ST-CVHorizontal Conveyor
ST-40Bypass Stacker
HOF-30Offline Feeder
FC-200AFore-edge Trimmer
SPF-200AStitcher & Folder
FC-200LFore-edge Trimmer
SPF-200LStitcher & Folder
SC-200Short Conveyor
LC-200Long Conveyor
PST-40Press Stacker
MKU-54Mobile Knife Fold Unit
TBC-200LTrimmer
Combination of Models for Offset Print
The available range of sheet size and sheet weight can be limited depending on the connected models. The production speed is affected by the combination of the models.
Available Combination of Models and Dimensions (Unit : mm / inch)
9
CF-400CV-400
CR-400AC-400HIF-400
30512.0”
Max. depth910 / 35.9”
55321.8”
HOF-400960 / 37.8”
27010.7”HOF-400+CF-400
1,230 / 48.5”
1,294 / 51.0”1,074 / 42.3” CF-4001,060 / 41.8”
64525.4”
1756.9”
HOF-400 Blower Box
84233.2”
SPF-200A: 1,625 / 64.0”SPF-200L: 1,856 / 73.1”
67626.6”
1,01740.0”
81031.9”
VAC-1000(Tower a)
VAC-1000(Tower m)
66426.2”
34213.5”
BlowerBox
SPF-200A/LFC-200A/LTBC-200LSC-200
47018.6”
IFU-200845
33.2”1,34052.8”
BVS-400 Power Box
HOF-400
FC-200A: 665 / 26.2”FC-200L: 735 / 29.0”
SPF-200A / FC-200A: 10,523 / 414.3”SPF-200L / FC-200L: 10,824 / 426.1”
HOF SystemBookletmaker Collator
*2
*3
*2
CCRCriss-Cross Receiving Tray
BC-20Bypass Conveyor
HIF-400Hybrid Conveyor
SA-40Sub Accumulator
ST-CVHorizontal Conveyor
IFU-200Infeeder Unit
VAC-1000VAC-600HVAC-100VAC-60H
Collator
BVS-400Barcode Verification System
CV-400Conveyor
ST-40Bypass Stacker
HOF-400Offline Feeder
FC-200AFore-edge Trimmer
SPF-200AStitcher & Folder
FC-200LFore-edge Trimmer
SPF-200LStitcher & Folder
AC-400Accumulator
CR-400Bleed Crease Module
CF-400Cover Feeder
IC-HOF400Image Checking System
*1: HOF-30 cannot be connected.*2: Sheets can be stacked on the CCR or the ST-40 only when on VAC
feeding mode.*3: VAC-100 / 60H cannot merge sheet from HOF and VAC tower.HP-200A
Hole Punch UnitTBC-200LTrimmer
HP-200AHole Punch Unit
SC-200Short Conveyor
LC-200Long Conveyor
PST-40Press Stacker
MKU-54Mobile Knife Fold Unit
Combination of Models for Digital Print
SPF-200A: 1,625 / 64.0”SPF-200L: 1,856 / 73.1” 842 / 33.2” 810 / 31.9” 810 / 31.9”1,295 / 51.0”
SPF-200A / FC-200A: 7,832 / 308.3”SPF-200L / FC-200L: 8,133 / 320.2”
SPF-200A / FC-200A: 8,372 / 329.6”SPF-200L / FC-200L: 8,673 / 341.4”
664 / 26.2”
34213.5”
92 / 3.7”1,216 / 47.8” 1,017 / 40.0”676
26.6”
84533.2”
65025.6” 992
39.1”Blower
Box
VAC-1000(Tower a)
VAC-1000(Tower m)
SPF-200A/LFC-200A/LTBC-200LLC-200 SC-200 ST-40 ST-CV VAC-1000(Tower m)
Max. depth1,120 / 44.1”
FC-200A: 665 / 26.2”FC-200L: 735 / 29.0”
Bookletmaker SPF-200 series
10
Model SPF-200A SPF-200L
FunctionsSaddle Stitch, Top Stitch and Fold, Fold only
Width
Length
Width x Length
The range of sheet
be limited when the sheets are fed from the connected ma-chine.
Saddle Stitch, Fold only, Pass Through
Top Stitch and Fold
Corner Stitch, Corner Stitch and Fold
Sheet Weight Range
Width
Length
Width x Length
Saddle Stitch, Fold only
Top Stitch and Fold
Corner Stitch and Fold
Stitch Thickness
Fold ThicknessSaddle Stitch
Stitch Distance When saddle stitching, the stitch distance may be limited by the fold knife.
Corner Stitching Position
Stitching Wire
stitcher.
Production Speed (A4-Finish, Portrait) (A4-Finish, Portrait)
(A4-Finish, Landscape)
Machine Dimensions
Model FC-200A FC-200L
Width
Length
Width x Length
Widt
h
LengthWidth x Length
Trim Width
Trim Thickness
Production Speed (A4-Finish, Portrait) (A4-Finish, Portrait)
(A4-Finish, Landscape)
Machine Dimensions
11
Options
Four Stitching Unit:FST-200
Additional stitcher heads can be mounted for up to 4 stitches per booklet. Optional stitcher heads (#27
Loop Stitch Kit ted to the standard stitcher heads to meet a variety of customer applica-tions. Loop stitch kit is required for each stitcher head.
Unit: delivered to the same delivery conveyor used for booklets without any change.
Booklet Thickness Detector: TD-200
The TD-200 checks the thickness of each booklet. An errored book is rejected to the reject tray for non-stop operation.
Preset Kicker: PK-30
According to a preset number input on the touchscreen, one booklet is skewed to easily identify and sepa-rate the end of a series.
TB-200Powerfully blows out cutting waste from the fore-edge trimmer.
Paper Insertion Knife Unit: PN-200
The PN-200 inserts a single sheet into the center spread of a
Mis-Stitch Detector: SDS-200
The SDS-200 checks the stitch on each booklet for higher quality control. A mis-stitched booklet is rejected to the reject tray for non-stop operation.
We have a large choice of optional accessories other than those listed below. Contact your local dealer about required options for meeting your needs.
Untrimmed Booklet Widt
h
Length
Width x Length
(*When connecting with SPF-200L)
transported.
Trim Width
Trim Thickness
Production Speed
Machine Dimensions
Width
Length
Width x Length
Sheet Weight Range *When you use thin sheets, you need to decrease the speed
the feed speed will decrease.
Production Speed
(When the sheets are processed one by one.)
4,000 booklets per hour
3,200 booklets per hour
4,000 booklets per hour
The production speed is limited depending on the stitcher.
Sheet Pile Height on Feed Tray
Machine Dimensions
Width
Length
Width x LengthThrough
Sheet Weight Range
Punch Thickness
Number of Holes 4 holes
Punch Hole Pitch 80 mm
Punch Hole Position Dimension from the booklet spine to center of hole can be
Punch Hole Diameter
Production Speed
Saddle Stitch
Fold Only
Machine Dimensions
Width
Length
Width x Length
Sheet Weight Range
Production Speed
Stack Capacity
Machine Dimensions (including feed error tray)
Bookletmaker SPF-200 series
160621/IY/SPF200A/15E/TV
Standard Finishing Systems, 10 Connector Road, Andover, MA 01810 877-404-4460 978-470-1920 Fax 978-470-2771 www.standardfinishing.com
510 Kuze Ooyabu-cho, Minami-ku, Kyoto, 601-8206, JapanPhone : +81-(0)75-934-6700 Fax : +81-(0)75-934-6708www.horizon.co.jp
Distributed by