spinner factory - c10645061.ssl.cf2.rackcdn.com spinner factory from the designer pelle petersen...
TRANSCRIPT
π r
Spinner FactoryFrom the designer Pelle Petersen
Design scope: Two EV3 Intelligent Bricks in one model.
That’s it!
Personal connection: This is by far the most complex model
that Pelle has ever designed. He did most of the work on
the model and enlisted some help from fellow designer, Lee
Magpelli, as well as a dedicated fan for the programming.
Building challenge: After many hours of brainstorming, the
designers settled on a model that launched a spinning top.
They then worked through the kinks until the top smoothly
launched from the model.
Programming challenge: With two Intelligent Bricks, the
obvious challenge is daisy chaining them together. Luckily,
you only have to program one brick using multiple ports.
Features: 2 EV3 Intelligent Bricks, 2 Color Sensors,
2 Touch Sensors, and ALL six motors
About the designer:Pelle Petersen started with the
LEGO® Company in 1992 on the
LEGO Technic team. He was also
one of the designers of the LEGO
MINDSTORMS® NXT platform.
LEARNINGPowered by LEGO® MINDSTORMS®
Education EV3