spl ul90at03 - farnell.com

SPL UL90AT03

1 Version 1.0 | 2021-11-05

Produktdatenblatt | Version 1.1 www.osram-os.com

Applications

SPL UL90AT03

Metal Can® TO56 Pulsed Laser Diode in TO-56 Package 905nm, 65 W Peak Power

3D Sensing

CCTV Surveillance

Electronic Equipment

Gesture Recognition

Highbay Industrial

Industrial Automation (Machine Controls, Light Barriers, Vision Controls)

Features: Laser wavelength 905 nm Suited for short laser pulses from 1 to 100 ns Robust TO-can package for high volume applications Not released for automotive applications

Ordering Information

Type Peak output power Ordering Codetyp.IF = 20 A; tp = 100 ns; f = 1 kHzPopt

SPL UL90AT03 65 W Q65113A1660

SPL UL90AT03

2 Version 1.0 | 2021-11-05

Maximum RatingsTS = 25 °C

Parameter Symbol Values

Operating temperature Top min. max.

-40 °C 85 °C

Storage temperature Tstg min. max.

-40 °C 100 °C

Peak output power 1) Popt max. 75 W

Forward current IF max. 20 A

Pulse width (FWHM) tP max. 100 ns

Duty cycle dc max. 0.1 %

Reverse voltage VR max. 3 V

Soldering temperature (2 mm from bottom edge of case)

TS max. 260 °C

SPL UL90AT03

3 Version 1.0 | 2021-11-05

CharacteristicsIF = 20 A; tp = 100 ns; D = 0.01 %; TS = 25 °C

Parameter Symbol Values

Number of emitters n 3

Operating voltage Vop typ. 9.5 V

Peak wavelength 2) λpeak min. typ. max.

898 nm 905 nm 912 nm

Spectral bandwidth (FWHM) ∆λ typ. 7 nm

Peak output power Popt typ. 65 W

Beam divergence (FWHM) parallel to pn-junction Θ‖ typ. 10 °

Beam divergence (FWHM) perpendicular to pn-junction Θ┴ typ. 25 °

Threshold current Ith typ. 0.3 A

Laser aperture (FWHM) parallel to pn-junction W|| typ. 110 µm

Laser aperture (FWHM) perpendicular to pn-junction W┴ typ. 10 µm

Thermal resistance junction solder point real 3) RthJS real typ. 35 K / W

Relative Spectral Emission 4), 5)

Ie,rel = f (λ); IF = 20 A; Popt = 65 W; tp = 100 ns

OHW00913

0880

λ

Ι rel%

nm

0.25

0.50

0.75

1.00

890 900 910 930

SPL UL90AT03

4 Version 1.0 | 2021-11-05

Far-Field Distribution Perpendicular to pn-Junction 4), 5)

Irel = f (Θ⊥); Popt = 65W; tp = 100ns; D = 0.01%OHL00753

0-40

0.25

0.50

0.75

1.00

Deg

Irel

θ-30 -20 -10 0 10 20 40

Far-Field Distribution Parallel to pn-Junction 4), 5)

Irel = f (ΘII); Popt = 65W; tp = 100ns; D = 0.01%

Deg-30θ

0.25

0

0.50

0.75

Irel

1.00OHF03755

-20 -10 0 10 30

SPL UL90AT03

5 Version 1.0 | 2021-11-05

Near-Field Distribution Parallel to pn-Junction 4), 5)

Irel = f (ΘII); Popt = 65W; tp = 100ns; D = 0.01%

Near-Field Distribution Perpendicular to pn-Junction 4), 5)

Irel = f (Θ⊥); Popt = 65W; tp = 100ns; D = 0.01%

SPL UL90AT03

6 Version 1.0 | 2021-11-05

Optical Output Power 4), 5)

Popt = f (IF)

0 5 10 15 20[ ]

0

20

40

60

[ ]

Centroid Wavelength 4)

λcentroid = f(TS); IF = 20A; tp = 100ns; D = 0.01%Centroid Wavelength 4)

λcentroid = f(TS); IF = 20A; tp = 100ns; D = 0.01%

SPL UL90AT03

7 Version 1.0 | 2021-11-05

Peak Output Power 4)

Popt = f(TS); IF = 20A; tp = 100ns; D = 0.01%

SPL UL90AT03

8 Version 1.0 | 2021-11-05

Dimensional Drawing 6)

Further Information:

Approximate Weight: 312.0 mg

SPL UL90AT03

9 Version 1.0 | 2021-11-05

Tray 6)

200 pieces per tray

Barcode-Product-Label (BPL)

SPL UL90AT03

10 Version 1.0 | 2021-11-05

Schematic Transportation Box 6)

OHA02886

PACKVAR:

R077Additional TEXT

P-1+Q-1

Multi TOPLED

Muste

r

OSRAM Opto

Semiconductors

(6P) BATCH NO:

(X) PROD NO:

10

(9D) D/C:

11(1T) LOT NO:

210021998

123GH1234

024 5

(Q)QTY: 2000

0144

(G) GROUP:

260 C RT240 C R

3

220 C R

MLBin3:Bin2: Q

-1-20

Bin1: P-1-20

LSY T6762

2a

Temp ST

R18DEMY

Barcode label

Original packing label

Box

Dimensions of Transportation BoxWidth Length Height

215 ± 5 mm 265 ± 5 mm 95 ± 5 mm

SPL UL90AT03

11 Version 1.0 | 2021-11-05

NotesDepending on the mode of operation, these devices emit highly concentrated visible and non visible light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1.

Subcomponents of this device contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. There-fore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duration. Respective failure limits are described in the IEC60810.

For further application related information please visit www.osram-os.com/appnotes

Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1 and IEC 62471.

SPL UL90AT03

12 Version 1.0 | 2021-11-05

Disclaimer

Attention please!The information describes the type of component and shall not be considered as assured characteristics.Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances.For information on the types in question please contact our Sales Organization.If printed or downloaded, please find the latest version on the OSRAM OS website.

PackingPlease use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.

Product and functional safety devices/applications or medical devices/applicationsOSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices.OSRAM OS products are not qualified at module and system level for such application.

An entire (100%) testing shall be performed after assembly of the OSRAM OS product to the final product. OSRAM OS product are not qualified at module and system level for such application. Customer is fully responsible and accountable for detection capability in case of sudden changes in electro-optical character-istics at component level.

In case buyer – or customer supplied by buyer – considers using OSRAM OS components in product safety devices/applications or medical devices/applications, buyer and/or customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and buyer and /or customer will analyze and coordi-nate the customer-specific request between OSRAM OS and buyer and/or customer.

SPL UL90AT03

13 Version 1.0 | 2021-11-05

Glossary1) Brightness: The brightness values are measured with a tolerance of ±11%.2) Wavelength: The wavelengths are measured with a tolerance of ±1 nm.3) Thermal resistance: junction - soldering point, of the device only, mounted on an ideal heatsink (e.g.

metal block)4) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic-

es, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could dif-fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.

5) Testing temperature: TA = 25°C (unless otherwise specified)6) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and

dimensions are specified in mm.

SPL UL90AT03

14 Version 1.0 | 2021-11-05

Revision HistoryVersion Date Change

1.0 2021-11-05 Initial Version

spl ul90at03 - farnell.com

Documents