spray and bead applied low-rise roofing adhesive · pdf filebead applied low-rise roofing...
TRANSCRIPT
Spray and Bead Applied Low-Rise RoofingAdhesive
Our Promise To You ...Quality. Every Time.
R O O F I N G A D H E S I V E
Fast• – Up to 8000 square feet per hour
Easy• – Does not require corner weighting of insulation boards
Safer• – Eliminates the handling of hot asphalt and asphalt kettles
Eliminates penetrations from fasteners •that could result in leaks
Eliminates Thermal shorts and System •R- values loss
Provides outstanding wind uplift values •
NO VOCs•
Water-blown•
Easy to apply•
FOAM-LOKTM LPA 100 provides a fast, easy to install, high performance roof system that will withstand high wind and eliminate the thousands of fasteners required to install conventional roofing systems to obtain similar wind uplift performance. The elimination of mechanical fasteners increases the square feet per hour of installed system and reduces the potential for leaks due to fastener penetrations. Another benefit of the FOAM-LOKTM LPA 100 is the elimination of thermal shorting and R-value loss due to conduction and loss of insulation area per fastener. LPA 100 also eliminates the issue of handling hot asphalt and asphalt kettles as well as the odor associated with using either a hot asphaltic solvent based adhesive product.
FOAM-LOKTM LPA 100 is designed specifically to provide superior adhesion of board stock type roofing insulations and cover boards to a multitude of roof deck compositions. Approved constructions including the most common board stock insulation materials as well as Dens-Deck, Securock and GP HD Wood fiberboard per FM 4470 are available.
R O O F I N G A D H E S I V E
GRACOE-10ReactorDurable, compact, lightweight and mobile•
Reliable, not disposable•
Affordably designed for adhesive •
applications
Utilizes a field proven pneumatically •
driven pumping system
Ideal for today’s fast set adhesive systems•
Technical DataMaximum Output: 16 lbs. / Min.
Maximum Rated Pressure: 1600 psiViscosity: 250-1500 cpsAir Requirement: 36 SCFM @ 100 psiWeight: 330 lbs.Actual Dimensions: H = 48 in
W = 41 inD = 28 in
Electrical Requirements: 29.5 amps @1 x 220 50/60 Hz
ADHES IVE SPRAY EQUIPMENTPackageIncludes:
Actuated Proportioner•
Tool Kit•
Accessory Package•
3/8” x 50’ Insulated Heated Hose Assembly•
1/4” x 10’ Insulated Heated Gun Whip•
Gap Gun with Hardened Chamber•
Flat Spray Tip•
Gun Tool Kit•
Manual and Pars I.D. •
Cart•
Material Supply Package•
5000 Watt Preheater•
BeadApplicationAdapter
By adding this simple Bead Application Adapter, the LPA 100 will convert from spray to bead dispensed adhesive.
This method is ideal for overspray sensitive applications. The advanced technology and chemistry provide the flexibility and performance that are key to your projects success.
Enjoy the same application temperature range, from 20 and up, as well as the ability to accommodate unique project variables with the simple infield equipment adjustment.
LapollaIndustries,Inc.1-888-4-LAPOLLAwww.lapolla.com
ForMoreInformationonHowtoGetStarted:
Cost ComparisonFOAM-LOKTM LPA 100 vs. Fasteners
( 1,000 Square Foot Roof Application)Labor Hrs/Rate (w/Overhaul) Labor Costs
LPA 100 (6000 sq. ft. per hour) 17 hours @ $60.00 (3 men per hour) $1,020
Fasteners (480 sq. ft. per hour) 420 hours @ $60.00 (3 men per hour) $25,200
Material Quantity / Unit Price Material CostLPA 100 1000 gallons @ $26.00 $26,000
Fasteners:Drill Bits for Fasteners 50 fasteners per bit @ $4.00 per bit $4,000
Fasteners 50,000 @ $.18 each $9,000
Summary FL 100 FastenersMaterial $26,000 $13,000
Labor $1,020 $25,200
TOTAL COST $27,020 $38,200
InsulationMaterialsProduct Thickness
ACFoamII 1.50 Inch
H-Shield 1.50 Inch
ISO95GL 1.50 Inch
ENERGY3 1.50 Inch
CoverBoardsProduct Thickness
Dens-Deck 0.50 Inch
Securock 0.50 Inch
GPHDWoodFiberboard 0.50 Inch
Substrate Method UpliftValue
ConcreteNew Full Coverage 1-270
Concrete(primed) Full Coverage 1-210
Concrete(primed) Bead 1-180
R O O F I N G A D H E S I V E