sub frd drop face - ajmfg › wp-content › uploads › products › sub-frd-drop … · frd flat...
TRANSCRIPT
-
A-J Manufacturing Co. • PO BOX 270320 • 3601 East 18th Street • Kansas City, MO 64127 • Phone 816-231-5522 • Fax 816-231-8437 • Toll Free 800-247-5746
This submittal is meant to demonstrate general dimensions of this product. The drawings are not meant to detail every aspect of the product. Drawings are not to scale.A-J Manufacturing reserves the right to make changes without written notice.
Submittal
Flat Radial Di�user Drop FaceFRD3/16” RD ON 1/4” STAGGERED CENTERS - 51% Free Area (4.75 mm x 3.35 mm)
ORDER SIZE - .250”(6.35 mm)
DROP FACE.500”
(12.7 mm)
ORD
ER S
IZE
- .25
0”(6
.35
mm
)
Safety Cables
Optional Filter Clips
Ultra-Fine Perforated Screen
24 Gauge SS Baffles 24 Gauge SS Baffles51% Perf Baffles
Factory Standards:
• Type 304 Stainless Steel
• Safety Cables
• #10 x 1.5” Stainless Truss Head Sheet Metal Screws
• #4 Satin Polished Finish
Factory Options (Extra Charge):
U.S. Units to Metric Conversion
INCHES x (25.4) = MILLIMETERS
Type 316 Stainless Steel
HEPA Rack with 9” Plenum
1” Filter Rack
2” Filter Rack
Baked Epoxy-Polyester Hyrid Powder Coat
Finish Available
MinimumW x H
MaximumW x H
9” x 9” 48” x 24”
2.080”(52.83 mm)
1.375”(34.93 mm)
T-BAR LAY-IN DETAIL1000 Plaster Frame with1/4”turn fastener
ORDER SIZE - 2.844”(63.5 mm)
Duct Opening- .125”
(3.175 mm)
2.500”(76.2 mm)
6”(152.4 mm)