submitted by avinash snehi ( ) me-1 3rd year
DESCRIPTION
INTRODUCTION TO GRINDING PROCESS The Grinding process is used to produce a high surface finish with a close tolerance and for machining hard materials. The process is a variation of polishing and uses abrasive materials held together by an adhesive in the form of a solid wheel. INTRODUCTION TO GRINDING PROCESSTRANSCRIPT
![Page 1: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/1.jpg)
GRINDINGSUBMITTED BY AVINASH SNEHI (1214340049)ME-1 3rd YEAR
![Page 2: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/2.jpg)
INTRODUCTION TO GRINDING PROCESS
• The Grinding process is used to produce a high surface finish with a close tolerance and for machining hard materials.
• The process is a variation of polishing and uses abrasive materials held together by an adhesive in the form of a solid wheel.
![Page 3: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/3.jpg)
Purposes for GRINDING
• Removal of surplus material• Production of high surface finishes• Machining very hard materials
![Page 4: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/4.jpg)
GRINDING WHEELS
• A grinding wheel consists of abrasive particles and bonding material. The bonding material holds the particles in place and establishes the shape and structure of the wheel.
• The wheel is generally made from a matrix of coarse particles pressed and bonded together to form a solid circular shape,various profiles and cross sections are available depending on the uses for the wheels.
![Page 5: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/5.jpg)
GRINDING WHEEL
GRINDING WHEELS
![Page 6: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/6.jpg)
FUNCTIONS OF A GRINDING WHEEL
• To remove materials from a workpiece• Each grains acts as a cutting tool• It is a cheap formation process• The only self sharpening cutting tool• Considered as a abrasive machining
![Page 7: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/7.jpg)
ABRASIVES
• Abrasives are the intended for actual cutting action hence they are the hard substances.
• Abrasives are classified as• Aluminium Oxides• Ceramic• Silicon carbide• Super Abrasive-DIAMOND• Tungsten Carbide
![Page 8: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/8.jpg)
Bond
• It is a material used as GLUE to hold the abrasive grains together.Bond has no cutting action.The bonding materials commonly used are
• Metal• Resin• Rubber• silicate
![Page 9: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/9.jpg)
TYPES OF GRINDING WHEEL
![Page 10: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/10.jpg)
GRINDING WHEEL WEAR
• Grinding wheel wear is an important consideration because it adversly affects the shape and accuracy of ground surfaces as in the case with cutting tools.
![Page 11: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/11.jpg)
TYPES OF WEAR
• Attritious Wear• Grain Fracture• Bond Fracture
![Page 12: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/12.jpg)
ATTRITIOUS WEAR
• The cutting edges of a sharp grain become dull.• Wear are caused by the interaction of the grain with the
workpiece involving both physical and chemical reactions.
• These reactions involve diffusion,chemical degradation or decomposition of the grain.
![Page 13: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/13.jpg)
• Attritious wear is low when the two materials are chemically inert with respect to each other.
• The more the inert the materials,the lower will be the tendency of reaction.
• This wear based on the reactivity of the grain and the workpiece and their relative mechanical properties such as hardness and toughness.
![Page 14: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/14.jpg)
GRAIN FRACTURE
Because abrasive grains are brittle,their fracture in grinding are important.• If the wear is excessive,the grain become dull.• Grinding become inefficient and produces undesirably
high temperatures.• New sharp cutting edge are produced continuously during
grinding.
![Page 15: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/15.jpg)
BOND FRACTURE
• The strength of bond is a significant parameter in grinding.• If the bond is too strong sharp grain along the circumference of
the grinding wheel can begin to the contact of workpiece thus process becomes insufficient.
• If the bond is too weak the grain will dislodged easily,wear rate is of wheel is increases then dimensional accuracy becomes difficult.
![Page 16: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/16.jpg)
GRINDING MACHINES AND OPERATIONS
• A grinding machine is a machine tool used for producing very fine finishes or making very light cuts using an abrasive wheel as the cutting device.
• A distinguishing feature of grinding machines is the rotating abrasive tool.
• Grinding machine is employed to obtain high accuracy along with very high class of surface finish on the workpiece.
![Page 17: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/17.jpg)
CATEGORIES OF GRINDING MACHINE
1. Surface Grinding2. Cylindrical Grinding3. Internal Grinding4. Centre Grinding5. Centerless Grinding
![Page 18: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/18.jpg)
SURFACE GRINDING
• Surface grinding is an abrasive machining process in which the grinding wheel removes material from the plain flat surfaces of the workpiece.
• the spindle position is either horizontal or vertical.• the relative motion of theworkpiece is achieved either by
reciprocating the workpiece past the wheel or by rotating it.
![Page 19: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/19.jpg)
![Page 20: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/20.jpg)
CYLINDRICAL GRINDING
• In this operation, the external or internal cylindrical surface of a workpiece are ground. In external cylindrical grinding (also center-type grinding) the workpiece rotates and reciprocates along its axis although for large and long workparts the grinding wheel reciprocates.
• In internal cylindrical grinding, a small wheel grinds the inside diameter of the part. The workpiece is held in a rotating chuck in the headstock and the wheel rotates at very high rotational speed. In this operation, the workpiece rotates and the grinding wheel reciprocates.
![Page 21: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/21.jpg)
![Page 22: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/22.jpg)
CENTRELESS GRINDING
• Centerless grinding is a process for continuously grinding cylindrical surfaces in which the workpiece is supported not by centers or chucks but by a rest blade. The workpiece is ground between two wheels. The larger grinding wheel does grinding, while the smaller regulating wheel, which is tilted at an angle regulates the velocity of the axial movement of the workpiece.
![Page 23: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/23.jpg)
![Page 24: SUBMITTED BY AVINASH SNEHI ( ) ME-1 3rd YEAR](https://reader034.vdocuments.net/reader034/viewer/2022051304/5a4d1b687f8b9ab0599b1d70/html5/thumbnails/24.jpg)
THANKS